pegasus: fix USB device ID for ETX-US2
USB device ID definition for I-O Data ETX-US2 is wrong. Correct ID is 0x093a. Here's snippet from /proc/bus/usb/devices; T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04bb ProdID=093a Rev= 1.01 S: Manufacturer=I-O DATA DEVICE,INC. S: Product=I-O DATA ETX2-US2 S: SerialNumber=A26427 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=224mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=pegasus E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=125us This patch enables pegasus driver to work fine with ETX-US2. Signed-off-by: Tadashi Abe <tabe@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
56e6943b90
commit
95718c1c25
|
@ -256,7 +256,7 @@ PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
|
|||
DEFAULT_GPIO_RESET )
|
||||
PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
|
||||
DEFAULT_GPIO_RESET | PEGASUS_II )
|
||||
PEGASUS_DEV( "IO DATA USB ETX-US2", VENDOR_IODATA, 0x092a,
|
||||
PEGASUS_DEV( "IO DATA USB ETX-US2", VENDOR_IODATA, 0x093a,
|
||||
DEFAULT_GPIO_RESET | PEGASUS_II )
|
||||
PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
|
||||
DEFAULT_GPIO_RESET)
|
||||
|
|
Loading…
Reference in New Issue