staging: kpc2000: kpc_i2c: Fix lines over 80 chars
Fix lines over 80 characters warnings. issue found by checkpatch. Signed-off-by: Jamal Shareef <jamal.k.shareef@gmail.com> Link: https://lore.kernel.org/r/8273ad9efccfb2c37ff1e9a25d5ccb26780567aa.1572293975.git.jamal.k.shareef@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
883afa2de4
commit
9535e71e7b
|
@ -99,7 +99,8 @@ struct i2c_device {
|
|||
#define SMBHSTSTS_INTR 0x02
|
||||
#define SMBHSTSTS_HOST_BUSY 0x01
|
||||
|
||||
#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | SMBHSTSTS_INTR)
|
||||
#define STATUS_FLAGS (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \
|
||||
SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | SMBHSTSTS_INTR)
|
||||
|
||||
/* Older devices have their ID defined in <linux/pci_ids.h> */
|
||||
#define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS 0x1c22
|
||||
|
@ -136,7 +137,8 @@ static int i801_check_pre(struct i2c_device *priv)
|
|||
|
||||
status = inb_p(SMBHSTSTS(priv));
|
||||
if (status & SMBHSTSTS_HOST_BUSY) {
|
||||
dev_err(&priv->adapter.dev, "SMBus is busy, can't use it! (status=%x)\n", status);
|
||||
dev_err(&priv->adapter.dev,
|
||||
"SMBus is busy, can't use it! (status=%x)\n", status);
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
|
@ -146,7 +148,8 @@ static int i801_check_pre(struct i2c_device *priv)
|
|||
outb_p(status, SMBHSTSTS(priv));
|
||||
status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
|
||||
if (status) {
|
||||
dev_err(&priv->adapter.dev, "Failed clearing status flags (%02x)\n", status);
|
||||
dev_err(&priv->adapter.dev,
|
||||
"Failed clearing status flags (%02x)\n", status);
|
||||
return -EBUSY;
|
||||
}
|
||||
}
|
||||
|
@ -162,15 +165,20 @@ static int i801_check_post(struct i2c_device *priv, int status, int timeout)
|
|||
if (timeout) {
|
||||
dev_err(&priv->adapter.dev, "Transaction timeout\n");
|
||||
/* try to stop the current command */
|
||||
dev_dbg(&priv->adapter.dev, "Terminating the current operation\n");
|
||||
outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL, SMBHSTCNT(priv));
|
||||
dev_dbg(&priv->adapter.dev,
|
||||
"Terminating the current operation\n");
|
||||
outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
|
||||
SMBHSTCNT(priv));
|
||||
usleep_range(1000, 2000);
|
||||
outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), SMBHSTCNT(priv));
|
||||
outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
|
||||
SMBHSTCNT(priv));
|
||||
|
||||
/* Check if it worked */
|
||||
status = inb_p(SMBHSTSTS(priv));
|
||||
if ((status & SMBHSTSTS_HOST_BUSY) || !(status & SMBHSTSTS_FAILED))
|
||||
dev_err(&priv->adapter.dev, "Failed terminating the transaction\n");
|
||||
if ((status & SMBHSTSTS_HOST_BUSY) ||
|
||||
!(status & SMBHSTSTS_FAILED))
|
||||
dev_err(&priv->adapter.dev,
|
||||
"Failed terminating the transaction\n");
|
||||
outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
@ -244,7 +252,9 @@ static void i801_wait_hwpec(struct i2c_device *priv)
|
|||
outb_p(status, SMBHSTSTS(priv));
|
||||
}
|
||||
|
||||
static int i801_block_transaction_by_block(struct i2c_device *priv, union i2c_smbus_data *data, char read_write, int hwpec)
|
||||
static int i801_block_transaction_by_block(struct i2c_device *priv,
|
||||
union i2c_smbus_data *data,
|
||||
char read_write, int hwpec)
|
||||
{
|
||||
int i, len;
|
||||
int status;
|
||||
|
@ -259,7 +269,8 @@ static int i801_block_transaction_by_block(struct i2c_device *priv, union i2c_sm
|
|||
outb_p(data->block[i + 1], SMBBLKDAT(priv));
|
||||
}
|
||||
|
||||
status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 | I801_PEC_EN * hwpec);
|
||||
status = i801_transaction(priv,
|
||||
I801_BLOCK_DATA | ENABLE_INT9 | I801_PEC_EN * hwpec);
|
||||
if (status)
|
||||
return status;
|
||||
|
||||
|
@ -275,7 +286,10 @@ static int i801_block_transaction_by_block(struct i2c_device *priv, union i2c_sm
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2c_smbus_data *data, char read_write, int command, int hwpec)
|
||||
static int i801_block_transaction_byte_by_byte(struct i2c_device *priv,
|
||||
union i2c_smbus_data *data,
|
||||
char read_write, int command,
|
||||
int hwpec)
|
||||
{
|
||||
int i, len;
|
||||
int smbcmd;
|
||||
|
@ -301,7 +315,8 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
|
|||
else
|
||||
smbcmd = I801_BLOCK_LAST;
|
||||
} else {
|
||||
if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_READ)
|
||||
if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
|
||||
read_write == I2C_SMBUS_READ)
|
||||
smbcmd = I801_I2C_BLOCK_DATA;
|
||||
else
|
||||
smbcmd = I801_BLOCK_DATA;
|
||||
|
@ -309,25 +324,33 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
|
|||
outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
|
||||
|
||||
if (i == 1)
|
||||
outb_p(inb(SMBHSTCNT(priv)) | I801_START, SMBHSTCNT(priv));
|
||||
outb_p(inb(SMBHSTCNT(priv)) | I801_START,
|
||||
SMBHSTCNT(priv));
|
||||
/* We will always wait for a fraction of a second! */
|
||||
timeout = 0;
|
||||
do {
|
||||
usleep_range(250, 500);
|
||||
status = inb_p(SMBHSTSTS(priv));
|
||||
} while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_RETRIES));
|
||||
} while (!(status & SMBHSTSTS_BYTE_DONE) &&
|
||||
(timeout++ < MAX_RETRIES));
|
||||
|
||||
result = i801_check_post(priv, status, timeout > MAX_RETRIES);
|
||||
if (result < 0)
|
||||
return result;
|
||||
if (i == 1 && read_write == I2C_SMBUS_READ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
|
||||
if (i == 1 && read_write == I2C_SMBUS_READ &&
|
||||
command != I2C_SMBUS_I2C_BLOCK_DATA) {
|
||||
len = inb_p(SMBHSTDAT0(priv));
|
||||
if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
|
||||
dev_err(&priv->adapter.dev, "Illegal SMBus block read size %d\n", len);
|
||||
dev_err(&priv->adapter.dev,
|
||||
"Illegal SMBus block read size %d\n",
|
||||
len);
|
||||
/* Recover */
|
||||
while (inb_p(SMBHSTSTS(priv)) & SMBHSTSTS_HOST_BUSY)
|
||||
outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
|
||||
outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
|
||||
while (inb_p(SMBHSTSTS(priv)) &
|
||||
SMBHSTSTS_HOST_BUSY)
|
||||
outb_p(SMBHSTSTS_BYTE_DONE,
|
||||
SMBHSTSTS(priv));
|
||||
outb_p(SMBHSTSTS_INTR,
|
||||
SMBHSTSTS(priv));
|
||||
return -EPROTO;
|
||||
}
|
||||
data->block[0] = len;
|
||||
|
@ -354,7 +377,9 @@ static int i801_set_block_buffer_mode(struct i2c_device *priv)
|
|||
}
|
||||
|
||||
/* Block transaction function */
|
||||
static int i801_block_transaction(struct i2c_device *priv, union i2c_smbus_data *data, char read_write, int command, int hwpec)
|
||||
static int i801_block_transaction(struct i2c_device *priv,
|
||||
union i2c_smbus_data *data, char read_write,
|
||||
int command, int hwpec)
|
||||
{
|
||||
int result = 0;
|
||||
//unsigned char hostc;
|
||||
|
@ -366,12 +391,14 @@ static int i801_block_transaction(struct i2c_device *priv, union i2c_smbus_data
|
|||
//pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
|
||||
//pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc | SMBHSTCFG_I2C_EN);
|
||||
} else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
|
||||
dev_err(&priv->adapter.dev, "I2C block read is unsupported!\n");
|
||||
dev_err(&priv->adapter.dev,
|
||||
"I2C block read is unsupported!\n");
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
if (read_write == I2C_SMBUS_WRITE || command == I2C_SMBUS_I2C_BLOCK_DATA) {
|
||||
if (read_write == I2C_SMBUS_WRITE ||
|
||||
command == I2C_SMBUS_I2C_BLOCK_DATA) {
|
||||
if (data->block[0] < 1)
|
||||
data->block[0] = 1;
|
||||
if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
|
||||
|
@ -384,13 +411,21 @@ static int i801_block_transaction(struct i2c_device *priv, union i2c_smbus_data
|
|||
* SMBus (not I2C) block transactions, even though the datasheet
|
||||
* doesn't mention this limitation.
|
||||
*/
|
||||
if ((priv->features & FEATURE_BLOCK_BUFFER) && command != I2C_SMBUS_I2C_BLOCK_DATA && i801_set_block_buffer_mode(priv) == 0)
|
||||
result = i801_block_transaction_by_block(priv, data, read_write, hwpec);
|
||||
else
|
||||
result = i801_block_transaction_byte_by_byte(priv, data, read_write, command, hwpec);
|
||||
if ((priv->features & FEATURE_BLOCK_BUFFER) &&
|
||||
command != I2C_SMBUS_I2C_BLOCK_DATA &&
|
||||
i801_set_block_buffer_mode(priv) == 0) {
|
||||
result = i801_block_transaction_by_block(priv, data,
|
||||
read_write, hwpec);
|
||||
} else {
|
||||
result = i801_block_transaction_byte_by_byte(priv, data,
|
||||
read_write,
|
||||
command, hwpec);
|
||||
}
|
||||
|
||||
if (result == 0 && hwpec)
|
||||
i801_wait_hwpec(priv);
|
||||
if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_WRITE) {
|
||||
if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
|
||||
read_write == I2C_SMBUS_WRITE) {
|
||||
/* restore saved configuration register value */
|
||||
//TODO: Figure out the right thing to do here...
|
||||
//pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
|
||||
|
@ -399,32 +434,41 @@ static int i801_block_transaction(struct i2c_device *priv, union i2c_smbus_data
|
|||
}
|
||||
|
||||
/* Return negative errno on error. */
|
||||
static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data)
|
||||
static s32 i801_access(struct i2c_adapter *adap, u16 addr,
|
||||
unsigned short flags, char read_write, u8 command,
|
||||
int size, union i2c_smbus_data *data)
|
||||
{
|
||||
int hwpec;
|
||||
int block = 0;
|
||||
int ret, xact = 0;
|
||||
struct i2c_device *priv = i2c_get_adapdata(adap);
|
||||
|
||||
hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA;
|
||||
hwpec = (priv->features & FEATURE_SMBUS_PEC) &&
|
||||
(flags & I2C_CLIENT_PEC) &&
|
||||
size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA;
|
||||
|
||||
switch (size) {
|
||||
case I2C_SMBUS_QUICK:
|
||||
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_QUICK\n");
|
||||
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
|
||||
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
||||
SMBHSTADD(priv));
|
||||
|
||||
xact = I801_QUICK;
|
||||
break;
|
||||
case I2C_SMBUS_BYTE:
|
||||
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE\n");
|
||||
|
||||
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
|
||||
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
||||
SMBHSTADD(priv));
|
||||
if (read_write == I2C_SMBUS_WRITE)
|
||||
outb_p(command, SMBHSTCMD(priv));
|
||||
xact = I801_BYTE;
|
||||
break;
|
||||
case I2C_SMBUS_BYTE_DATA:
|
||||
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BYTE_DATA\n");
|
||||
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
|
||||
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
||||
SMBHSTADD(priv));
|
||||
|
||||
outb_p(command, SMBHSTCMD(priv));
|
||||
if (read_write == I2C_SMBUS_WRITE)
|
||||
outb_p(data->byte, SMBHSTDAT0(priv));
|
||||
|
@ -432,7 +476,9 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
|
|||
break;
|
||||
case I2C_SMBUS_WORD_DATA:
|
||||
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_WORD_DATA\n");
|
||||
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
|
||||
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
||||
SMBHSTADD(priv));
|
||||
|
||||
outb_p(command, SMBHSTCMD(priv));
|
||||
if (read_write == I2C_SMBUS_WRITE) {
|
||||
outb_p(data->word & 0xff, SMBHSTDAT0(priv));
|
||||
|
@ -442,7 +488,9 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
|
|||
break;
|
||||
case I2C_SMBUS_BLOCK_DATA:
|
||||
dev_dbg(&priv->adapter.dev, " [acc] SMBUS_BLOCK_DATA\n");
|
||||
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
|
||||
outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
|
||||
SMBHSTADD(priv));
|
||||
|
||||
outb_p(command, SMBHSTCMD(priv));
|
||||
block = 1;
|
||||
break;
|
||||
|
@ -463,7 +511,8 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
|
|||
block = 1;
|
||||
break;
|
||||
default:
|
||||
dev_dbg(&priv->adapter.dev, " [acc] Unsupported transaction %d\n", size);
|
||||
dev_dbg(&priv->adapter.dev,
|
||||
" [acc] Unsupported transaction %d\n", size);
|
||||
return -EOPNOTSUPP;
|
||||
}
|
||||
|
||||
|
@ -472,13 +521,15 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
|
|||
outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
|
||||
} else {
|
||||
dev_dbg(&priv->adapter.dev, " [acc] hwpec: no\n");
|
||||
outb_p(inb_p(SMBAUXCTL(priv)) & (~SMBAUXCTL_CRC), SMBAUXCTL(priv));
|
||||
outb_p(inb_p(SMBAUXCTL(priv)) &
|
||||
(~SMBAUXCTL_CRC), SMBAUXCTL(priv));
|
||||
}
|
||||
|
||||
if (block) {
|
||||
//ret = 0;
|
||||
dev_dbg(&priv->adapter.dev, " [acc] block: yes\n");
|
||||
ret = i801_block_transaction(priv, data, read_write, size, hwpec);
|
||||
ret = i801_block_transaction(priv, data, read_write, size,
|
||||
hwpec);
|
||||
} else {
|
||||
dev_dbg(&priv->adapter.dev, " [acc] block: no\n");
|
||||
ret = i801_transaction(priv, xact | ENABLE_INT9);
|
||||
|
@ -490,7 +541,8 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
|
|||
*/
|
||||
if (hwpec || block) {
|
||||
dev_dbg(&priv->adapter.dev, " [acc] hwpec || block\n");
|
||||
outb_p(inb_p(SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B), SMBAUXCTL(priv));
|
||||
outb_p(inb_p(SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC |
|
||||
SMBAUXCTL_E32B), SMBAUXCTL(priv));
|
||||
}
|
||||
if (block) {
|
||||
dev_dbg(&priv->adapter.dev, " [acc] block\n");
|
||||
|
@ -501,19 +553,22 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
|
|||
return ret;
|
||||
}
|
||||
if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) {
|
||||
dev_dbg(&priv->adapter.dev, " [acc] I2C_SMBUS_WRITE || I801_QUICK -> ret 0\n");
|
||||
dev_dbg(&priv->adapter.dev,
|
||||
" [acc] I2C_SMBUS_WRITE || I801_QUICK -> ret 0\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
switch (xact & 0x7f) {
|
||||
case I801_BYTE: /* Result put in SMBHSTDAT0 */
|
||||
case I801_BYTE_DATA:
|
||||
dev_dbg(&priv->adapter.dev, " [acc] I801_BYTE or I801_BYTE_DATA\n");
|
||||
dev_dbg(&priv->adapter.dev,
|
||||
" [acc] I801_BYTE or I801_BYTE_DATA\n");
|
||||
data->byte = inb_p(SMBHSTDAT0(priv));
|
||||
break;
|
||||
case I801_WORD_DATA:
|
||||
dev_dbg(&priv->adapter.dev, " [acc] I801_WORD_DATA\n");
|
||||
data->word = inb_p(SMBHSTDAT0(priv)) + (inb_p(SMBHSTDAT1(priv)) << 8);
|
||||
data->word = inb_p(SMBHSTDAT0(priv)) +
|
||||
(inb_p(SMBHSTDAT1(priv)) << 8);
|
||||
break;
|
||||
}
|
||||
return 0;
|
||||
|
@ -535,10 +590,13 @@ static u32 i801_func(struct i2c_adapter *adapter)
|
|||
// http://lxr.free-electrons.com/source/include/uapi/linux/i2c.h#L85
|
||||
|
||||
u32 f =
|
||||
I2C_FUNC_I2C | /* 0x00000001 (I enabled this one) */
|
||||
I2C_FUNC_I2C | /* 0x00000001(I enabled this
|
||||
* one)
|
||||
*/
|
||||
!I2C_FUNC_10BIT_ADDR | /* 0x00000002 */
|
||||
!I2C_FUNC_PROTOCOL_MANGLING | /* 0x00000004 */
|
||||
((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) | /* 0x00000008 */
|
||||
((priv->features & FEATURE_SMBUS_PEC) ?
|
||||
I2C_FUNC_SMBUS_PEC : 0) | /* 0x00000008 */
|
||||
!I2C_FUNC_SMBUS_BLOCK_PROC_CALL | /* 0x00008000 */
|
||||
I2C_FUNC_SMBUS_QUICK | /* 0x00010000 */
|
||||
!I2C_FUNC_SMBUS_READ_BYTE | /* 0x00020000 */
|
||||
|
@ -550,15 +608,29 @@ static u32 i801_func(struct i2c_adapter *adapter)
|
|||
!I2C_FUNC_SMBUS_PROC_CALL | /* 0x00800000 */
|
||||
!I2C_FUNC_SMBUS_READ_BLOCK_DATA | /* 0x01000000 */
|
||||
!I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | /* 0x02000000 */
|
||||
((priv->features & FEATURE_I2C_BLOCK_READ) ? I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) | /* 0x04000000 */
|
||||
((priv->features & FEATURE_I2C_BLOCK_READ) ?
|
||||
I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0) | /* 0x04000000 */
|
||||
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK | /* 0x08000000 */
|
||||
|
||||
I2C_FUNC_SMBUS_BYTE | /* _READ_BYTE _WRITE_BYTE */
|
||||
I2C_FUNC_SMBUS_BYTE_DATA | /* _READ_BYTE_DATA _WRITE_BYTE_DATA */
|
||||
I2C_FUNC_SMBUS_WORD_DATA | /* _READ_WORD_DATA _WRITE_WORD_DATA */
|
||||
I2C_FUNC_SMBUS_BLOCK_DATA | /* _READ_BLOCK_DATA _WRITE_BLOCK_DATA */
|
||||
!I2C_FUNC_SMBUS_I2C_BLOCK | /* _READ_I2C_BLOCK _WRITE_I2C_BLOCK */
|
||||
!I2C_FUNC_SMBUS_EMUL; /* _QUICK _BYTE _BYTE_DATA _WORD_DATA _PROC_CALL _WRITE_BLOCK_DATA _I2C_BLOCK _PEC */
|
||||
I2C_FUNC_SMBUS_BYTE_DATA | /* _READ_BYTE_DATA
|
||||
* _WRITE_BYTE_DATA
|
||||
*/
|
||||
I2C_FUNC_SMBUS_WORD_DATA | /* _READ_WORD_DATA
|
||||
* _WRITE_WORD_DATA
|
||||
*/
|
||||
I2C_FUNC_SMBUS_BLOCK_DATA | /* _READ_BLOCK_DATA
|
||||
* _WRITE_BLOCK_DATA
|
||||
*/
|
||||
!I2C_FUNC_SMBUS_I2C_BLOCK | /* _READ_I2C_BLOCK
|
||||
* _WRITE_I2C_BLOCK
|
||||
*/
|
||||
!I2C_FUNC_SMBUS_EMUL; /* _QUICK _BYTE
|
||||
* _BYTE_DATA _WORD_DATA
|
||||
* _PROC_CALL
|
||||
* _WRITE_BLOCK_DATA
|
||||
* _I2C_BLOCK _PEC
|
||||
*/
|
||||
return f;
|
||||
}
|
||||
|
||||
|
@ -611,7 +683,8 @@ static int pi2c_probe(struct platform_device *pldev)
|
|||
priv->adapter.retries = 3;
|
||||
|
||||
//snprintf(priv->adapter.name, sizeof(priv->adapter.name), "Fake SMBus I801 adapter at %04lx", priv->smba);
|
||||
snprintf(priv->adapter.name, sizeof(priv->adapter.name), "Fake SMBus I801 adapter");
|
||||
snprintf(priv->adapter.name, sizeof(priv->adapter.name),
|
||||
"Fake SMBus I801 adapter");
|
||||
|
||||
err = i2c_add_adapter(&priv->adapter);
|
||||
if (err) {
|
||||
|
|
Loading…
Reference in New Issue