cxl: add a firmware update mechanism using the sysfs firmware loader
The sysfs based firmware loader mechanism was created to easily allow userspace to upload firmware images to FPGA cards. This also happens to be pretty suitable to create a user-initiated but kernel-controlled firmware update mechanism for CXL devices, using the CXL specified mailbox commands. Since firmware update commands can be long-running, and can be processed in the background by the endpoint device, it is desirable to have the ability to chunk the firmware transfer down to smaller pieces, so that one operation does not monopolize the mailbox, locking out any other long running background commands entirely - e.g. security commands like 'sanitize' or poison scanning operations. The firmware loader mechanism allows a natural way to perform this chunking, as after each mailbox command, that is restricted to the maximum mailbox payload size, the cxl memdev driver relinquishes control back to the fw_loader system and awaits the next chunk of data to transfer. This opens opportunities for other background commands to access the mailbox and send their own slices of background commands. Add the necessary helpers and state tracking to be able to perform the 'Get FW Info', 'Transfer FW', and 'Activate FW' mailbox commands as described in the CXL spec. Wire these up to the firmware loader callbacks, and register with that system to create the memX/firmware/ sysfs ABI. Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Cc: Russ Weight <russell.h.weight@intel.com> Cc: Alison Schofield <alison.schofield@intel.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ben Widawsky <bwidawsk@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20230602-vv-fw_update-v4-1-c6265bd7343b@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This commit is contained in:
Vishal Verma
Dan Williams
parent
ccadf1310f
commit
9521875bbe
|
|
@ -58,6 +58,17 @@ Description:
|
|||
affinity for this device.
|
||||
|
||||
|
||||
What: /sys/bus/cxl/devices/memX/firmware/
|
||||
Date: April, 2023
|
||||
KernelVersion: v6.5
|
||||
Contact: linux-cxl@vger.kernel.org
|
||||
Description:
|
||||
(RW) Firmware uploader mechanism. The different files under
|
||||
this directory can be used to upload and activate new
|
||||
firmware for CXL devices. The interfaces under this are
|
||||
documented in sysfs-class-firmware.
|
||||
|
||||
|
||||
What: /sys/bus/cxl/devices/*/devtype
|
||||
Date: June, 2021
|
||||
KernelVersion: v5.14
|
||||
|
|
|
|||
|
|
@ -82,6 +82,7 @@ config CXL_PMEM
|
|||
config CXL_MEM
|
||||
tristate "CXL: Memory Expansion"
|
||||
depends on CXL_PCI
|
||||
select FW_UPLOAD
|
||||
default CXL_BUS
|
||||
help
|
||||
The CXL.mem protocol allows a device to act as a provider of "System
|
||||
|
|
|
|||
|
|
@ -1,6 +1,7 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/* Copyright(c) 2020 Intel Corporation. */
|
||||
|
||||
#include <linux/firmware.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/idr.h>
|
||||
|
|
@ -542,6 +543,313 @@ static int cxl_memdev_release_file(struct inode *inode, struct file *file)
|
|||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* cxl_mem_get_fw_info - Get Firmware info
|
||||
* @cxlds: The device data for the operation
|
||||
*
|
||||
* Retrieve firmware info for the device specified.
|
||||
*
|
||||
* Return: 0 if no error: or the result of the mailbox command.
|
||||
*
|
||||
* See CXL-3.0 8.2.9.3.1 Get FW Info
|
||||
*/
|
||||
static int cxl_mem_get_fw_info(struct cxl_dev_state *cxlds)
|
||||
{
|
||||
struct cxl_mbox_get_fw_info info;
|
||||
struct cxl_mbox_cmd mbox_cmd;
|
||||
int rc;
|
||||
|
||||
mbox_cmd = (struct cxl_mbox_cmd) {
|
||||
.opcode = CXL_MBOX_OP_GET_FW_INFO,
|
||||
.size_out = sizeof(info),
|
||||
.payload_out = &info,
|
||||
};
|
||||
|
||||
rc = cxl_internal_send_cmd(cxlds, &mbox_cmd);
|
||||
if (rc < 0)
|
||||
return rc;
|
||||
|
||||
cxlds->fw.num_slots = info.num_slots;
|
||||
cxlds->fw.cur_slot = FIELD_GET(CXL_FW_INFO_SLOT_INFO_CUR_MASK,
|
||||
info.slot_info);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* cxl_mem_activate_fw - Activate Firmware
|
||||
* @cxlds: The device data for the operation
|
||||
* @slot: slot number to activate
|
||||
*
|
||||
* Activate firmware in a given slot for the device specified.
|
||||
*
|
||||
* Return: 0 if no error: or the result of the mailbox command.
|
||||
*
|
||||
* See CXL-3.0 8.2.9.3.3 Activate FW
|
||||
*/
|
||||
static int cxl_mem_activate_fw(struct cxl_dev_state *cxlds, int slot)
|
||||
{
|
||||
struct cxl_mbox_activate_fw activate;
|
||||
struct cxl_mbox_cmd mbox_cmd;
|
||||
|
||||
if (slot == 0 || slot > cxlds->fw.num_slots)
|
||||
return -EINVAL;
|
||||
|
||||
mbox_cmd = (struct cxl_mbox_cmd) {
|
||||
.opcode = CXL_MBOX_OP_ACTIVATE_FW,
|
||||
.size_in = sizeof(activate),
|
||||
.payload_in = &activate,
|
||||
};
|
||||
|
||||
/* Only offline activation supported for now */
|
||||
activate.action = CXL_FW_ACTIVATE_OFFLINE;
|
||||
activate.slot = slot;
|
||||
|
||||
return cxl_internal_send_cmd(cxlds, &mbox_cmd);
|
||||
}
|
||||
|
||||
/**
|
||||
* cxl_mem_abort_fw_xfer - Abort an in-progress FW transfer
|
||||
* @cxlds: The device data for the operation
|
||||
*
|
||||
* Abort an in-progress firmware transfer for the device specified.
|
||||
*
|
||||
* Return: 0 if no error: or the result of the mailbox command.
|
||||
*
|
||||
* See CXL-3.0 8.2.9.3.2 Transfer FW
|
||||
*/
|
||||
static int cxl_mem_abort_fw_xfer(struct cxl_dev_state *cxlds)
|
||||
{
|
||||
struct cxl_mbox_transfer_fw *transfer;
|
||||
struct cxl_mbox_cmd mbox_cmd;
|
||||
int rc;
|
||||
|
||||
transfer = kzalloc(struct_size(transfer, data, 0), GFP_KERNEL);
|
||||
if (!transfer)
|
||||
return -ENOMEM;
|
||||
|
||||
/* Set a 1s poll interval and a total wait time of 30s */
|
||||
mbox_cmd = (struct cxl_mbox_cmd) {
|
||||
.opcode = CXL_MBOX_OP_TRANSFER_FW,
|
||||
.size_in = sizeof(*transfer),
|
||||
.payload_in = transfer,
|
||||
.poll_interval_ms = 1000,
|
||||
.poll_count = 30,
|
||||
};
|
||||
|
||||
transfer->action = CXL_FW_TRANSFER_ACTION_ABORT;
|
||||
|
||||
rc = cxl_internal_send_cmd(cxlds, &mbox_cmd);
|
||||
kfree(transfer);
|
||||
return rc;
|
||||
}
|
||||
|
||||
static void cxl_fw_cleanup(struct fw_upload *fwl)
|
||||
{
|
||||
struct cxl_dev_state *cxlds = fwl->dd_handle;
|
||||
|
||||
cxlds->fw.next_slot = 0;
|
||||
}
|
||||
|
||||
static int cxl_fw_do_cancel(struct fw_upload *fwl)
|
||||
{
|
||||
struct cxl_dev_state *cxlds = fwl->dd_handle;
|
||||
struct cxl_memdev *cxlmd = cxlds->cxlmd;
|
||||
int rc;
|
||||
|
||||
rc = cxl_mem_abort_fw_xfer(cxlds);
|
||||
if (rc < 0)
|
||||
dev_err(&cxlmd->dev, "Error aborting FW transfer: %d\n", rc);
|
||||
|
||||
return FW_UPLOAD_ERR_CANCELED;
|
||||
}
|
||||
|
||||
static enum fw_upload_err cxl_fw_prepare(struct fw_upload *fwl, const u8 *data,
|
||||
u32 size)
|
||||
{
|
||||
struct cxl_dev_state *cxlds = fwl->dd_handle;
|
||||
struct cxl_mbox_transfer_fw *transfer;
|
||||
|
||||
if (!size)
|
||||
return FW_UPLOAD_ERR_INVALID_SIZE;
|
||||
|
||||
cxlds->fw.oneshot = struct_size(transfer, data, size) <
|
||||
cxlds->payload_size;
|
||||
|
||||
if (cxl_mem_get_fw_info(cxlds))
|
||||
return FW_UPLOAD_ERR_HW_ERROR;
|
||||
|
||||
/*
|
||||
* So far no state has been changed, hence no other cleanup is
|
||||
* necessary. Simply return the cancelled status.
|
||||
*/
|
||||
if (test_and_clear_bit(CXL_FW_CANCEL, cxlds->fw.state))
|
||||
return FW_UPLOAD_ERR_CANCELED;
|
||||
|
||||
return FW_UPLOAD_ERR_NONE;
|
||||
}
|
||||
|
||||
static enum fw_upload_err cxl_fw_write(struct fw_upload *fwl, const u8 *data,
|
||||
u32 offset, u32 size, u32 *written)
|
||||
{
|
||||
struct cxl_dev_state *cxlds = fwl->dd_handle;
|
||||
struct cxl_memdev *cxlmd = cxlds->cxlmd;
|
||||
struct cxl_mbox_transfer_fw *transfer;
|
||||
struct cxl_mbox_cmd mbox_cmd;
|
||||
u32 cur_size, remaining;
|
||||
size_t size_in;
|
||||
int rc;
|
||||
|
||||
*written = 0;
|
||||
|
||||
/* Offset has to be aligned to 128B (CXL-3.0 8.2.9.3.2 Table 8-57) */
|
||||
if (!IS_ALIGNED(offset, CXL_FW_TRANSFER_ALIGNMENT)) {
|
||||
dev_err(&cxlmd->dev,
|
||||
"misaligned offset for FW transfer slice (%u)\n",
|
||||
offset);
|
||||
return FW_UPLOAD_ERR_RW_ERROR;
|
||||
}
|
||||
|
||||
/*
|
||||
* Pick transfer size based on cxlds->payload_size
|
||||
* @size must bw 128-byte aligned, ->payload_size is a power of 2
|
||||
* starting at 256 bytes, and sizeof(*transfer) is 128.
|
||||
* These constraints imply that @cur_size will always be 128b aligned.
|
||||
*/
|
||||
cur_size = min_t(size_t, size, cxlds->payload_size - sizeof(*transfer));
|
||||
|
||||
remaining = size - cur_size;
|
||||
size_in = struct_size(transfer, data, cur_size);
|
||||
|
||||
if (test_and_clear_bit(CXL_FW_CANCEL, cxlds->fw.state))
|
||||
return cxl_fw_do_cancel(fwl);
|
||||
|
||||
/*
|
||||
* Slot numbers are 1-indexed
|
||||
* cur_slot is the 0-indexed next_slot (i.e. 'cur_slot - 1 + 1')
|
||||
* Check for rollover using modulo, and 1-index it by adding 1
|
||||
*/
|
||||
cxlds->fw.next_slot = (cxlds->fw.cur_slot % cxlds->fw.num_slots) + 1;
|
||||
|
||||
/* Do the transfer via mailbox cmd */
|
||||
transfer = kzalloc(size_in, GFP_KERNEL);
|
||||
if (!transfer)
|
||||
return FW_UPLOAD_ERR_RW_ERROR;
|
||||
|
||||
transfer->offset = cpu_to_le32(offset / CXL_FW_TRANSFER_ALIGNMENT);
|
||||
memcpy(transfer->data, data + offset, cur_size);
|
||||
if (cxlds->fw.oneshot) {
|
||||
transfer->action = CXL_FW_TRANSFER_ACTION_FULL;
|
||||
transfer->slot = cxlds->fw.next_slot;
|
||||
} else {
|
||||
if (offset == 0) {
|
||||
transfer->action = CXL_FW_TRANSFER_ACTION_INITIATE;
|
||||
} else if (remaining == 0) {
|
||||
transfer->action = CXL_FW_TRANSFER_ACTION_END;
|
||||
transfer->slot = cxlds->fw.next_slot;
|
||||
} else {
|
||||
transfer->action = CXL_FW_TRANSFER_ACTION_CONTINUE;
|
||||
}
|
||||
}
|
||||
|
||||
mbox_cmd = (struct cxl_mbox_cmd) {
|
||||
.opcode = CXL_MBOX_OP_TRANSFER_FW,
|
||||
.size_in = size_in,
|
||||
.payload_in = transfer,
|
||||
.poll_interval_ms = 1000,
|
||||
.poll_count = 30,
|
||||
};
|
||||
|
||||
rc = cxl_internal_send_cmd(cxlds, &mbox_cmd);
|
||||
if (rc < 0) {
|
||||
rc = FW_UPLOAD_ERR_RW_ERROR;
|
||||
goto out_free;
|
||||
}
|
||||
|
||||
*written = cur_size;
|
||||
|
||||
/* Activate FW if oneshot or if the last slice was written */
|
||||
if (cxlds->fw.oneshot || remaining == 0) {
|
||||
dev_dbg(&cxlmd->dev, "Activating firmware slot: %d\n",
|
||||
cxlds->fw.next_slot);
|
||||
rc = cxl_mem_activate_fw(cxlds, cxlds->fw.next_slot);
|
||||
if (rc < 0) {
|
||||
dev_err(&cxlmd->dev, "Error activating firmware: %d\n",
|
||||
rc);
|
||||
rc = FW_UPLOAD_ERR_HW_ERROR;
|
||||
goto out_free;
|
||||
}
|
||||
}
|
||||
|
||||
rc = FW_UPLOAD_ERR_NONE;
|
||||
|
||||
out_free:
|
||||
kfree(transfer);
|
||||
return rc;
|
||||
}
|
||||
|
||||
static enum fw_upload_err cxl_fw_poll_complete(struct fw_upload *fwl)
|
||||
{
|
||||
struct cxl_dev_state *cxlds = fwl->dd_handle;
|
||||
|
||||
/*
|
||||
* cxl_internal_send_cmd() handles background operations synchronously.
|
||||
* No need to wait for completions here - any errors would've been
|
||||
* reported and handled during the ->write() call(s).
|
||||
* Just check if a cancel request was received, and return success.
|
||||
*/
|
||||
if (test_and_clear_bit(CXL_FW_CANCEL, cxlds->fw.state))
|
||||
return cxl_fw_do_cancel(fwl);
|
||||
|
||||
return FW_UPLOAD_ERR_NONE;
|
||||
}
|
||||
|
||||
static void cxl_fw_cancel(struct fw_upload *fwl)
|
||||
{
|
||||
struct cxl_dev_state *cxlds = fwl->dd_handle;
|
||||
|
||||
set_bit(CXL_FW_CANCEL, cxlds->fw.state);
|
||||
}
|
||||
|
||||
static const struct fw_upload_ops cxl_memdev_fw_ops = {
|
||||
.prepare = cxl_fw_prepare,
|
||||
.write = cxl_fw_write,
|
||||
.poll_complete = cxl_fw_poll_complete,
|
||||
.cancel = cxl_fw_cancel,
|
||||
.cleanup = cxl_fw_cleanup,
|
||||
};
|
||||
|
||||
static void devm_cxl_remove_fw_upload(void *fwl)
|
||||
{
|
||||
firmware_upload_unregister(fwl);
|
||||
}
|
||||
|
||||
int cxl_memdev_setup_fw_upload(struct cxl_dev_state *cxlds)
|
||||
{
|
||||
struct device *dev = &cxlds->cxlmd->dev;
|
||||
struct fw_upload *fwl;
|
||||
int rc;
|
||||
|
||||
if (!test_bit(CXL_MEM_COMMAND_ID_GET_FW_INFO, cxlds->enabled_cmds))
|
||||
return 0;
|
||||
|
||||
fwl = firmware_upload_register(THIS_MODULE, dev, dev_name(dev),
|
||||
&cxl_memdev_fw_ops, cxlds);
|
||||
if (IS_ERR(fwl))
|
||||
return dev_err_probe(dev, PTR_ERR(fwl),
|
||||
"Failed to register firmware loader\n");
|
||||
|
||||
rc = devm_add_action_or_reset(cxlds->dev, devm_cxl_remove_fw_upload,
|
||||
fwl);
|
||||
if (rc)
|
||||
dev_err(dev,
|
||||
"Failed to add firmware loader remove action: %d\n",
|
||||
rc);
|
||||
|
||||
return rc;
|
||||
}
|
||||
EXPORT_SYMBOL_NS_GPL(cxl_memdev_setup_fw_upload, CXL);
|
||||
|
||||
static const struct file_operations cxl_memdev_fops = {
|
||||
.owner = THIS_MODULE,
|
||||
.unlocked_ioctl = cxl_memdev_ioctl,
|
||||
|
|
|
|||
|
|
@ -83,6 +83,7 @@ static inline bool is_cxl_endpoint(struct cxl_port *port)
|
|||
}
|
||||
|
||||
struct cxl_memdev *devm_cxl_add_memdev(struct cxl_dev_state *cxlds);
|
||||
int cxl_memdev_setup_fw_upload(struct cxl_dev_state *cxlds);
|
||||
int devm_cxl_dpa_reserve(struct cxl_endpoint_decoder *cxled,
|
||||
resource_size_t base, resource_size_t len,
|
||||
resource_size_t skipped);
|
||||
|
|
@ -260,6 +261,84 @@ struct cxl_poison_state {
|
|||
struct mutex lock; /* Protect reads of poison list */
|
||||
};
|
||||
|
||||
/*
|
||||
* Get FW Info
|
||||
* CXL rev 3.0 section 8.2.9.3.1; Table 8-56
|
||||
*/
|
||||
struct cxl_mbox_get_fw_info {
|
||||
u8 num_slots;
|
||||
u8 slot_info;
|
||||
u8 activation_cap;
|
||||
u8 reserved[13];
|
||||
char slot_1_revision[16];
|
||||
char slot_2_revision[16];
|
||||
char slot_3_revision[16];
|
||||
char slot_4_revision[16];
|
||||
} __packed;
|
||||
|
||||
#define CXL_FW_INFO_SLOT_INFO_CUR_MASK GENMASK(2, 0)
|
||||
#define CXL_FW_INFO_SLOT_INFO_NEXT_MASK GENMASK(5, 3)
|
||||
#define CXL_FW_INFO_SLOT_INFO_NEXT_SHIFT 3
|
||||
#define CXL_FW_INFO_ACTIVATION_CAP_HAS_LIVE_ACTIVATE BIT(0)
|
||||
|
||||
/*
|
||||
* Transfer FW Input Payload
|
||||
* CXL rev 3.0 section 8.2.9.3.2; Table 8-57
|
||||
*/
|
||||
struct cxl_mbox_transfer_fw {
|
||||
u8 action;
|
||||
u8 slot;
|
||||
u8 reserved[2];
|
||||
__le32 offset;
|
||||
u8 reserved2[0x78];
|
||||
u8 data[];
|
||||
} __packed;
|
||||
|
||||
#define CXL_FW_TRANSFER_ACTION_FULL 0x0
|
||||
#define CXL_FW_TRANSFER_ACTION_INITIATE 0x1
|
||||
#define CXL_FW_TRANSFER_ACTION_CONTINUE 0x2
|
||||
#define CXL_FW_TRANSFER_ACTION_END 0x3
|
||||
#define CXL_FW_TRANSFER_ACTION_ABORT 0x4
|
||||
|
||||
/*
|
||||
* CXL rev 3.0 section 8.2.9.3.2 mandates 128-byte alignment for FW packages
|
||||
* and for each part transferred in a Transfer FW command.
|
||||
*/
|
||||
#define CXL_FW_TRANSFER_ALIGNMENT 128
|
||||
|
||||
/*
|
||||
* Activate FW Input Payload
|
||||
* CXL rev 3.0 section 8.2.9.3.3; Table 8-58
|
||||
*/
|
||||
struct cxl_mbox_activate_fw {
|
||||
u8 action;
|
||||
u8 slot;
|
||||
} __packed;
|
||||
|
||||
#define CXL_FW_ACTIVATE_ONLINE 0x0
|
||||
#define CXL_FW_ACTIVATE_OFFLINE 0x1
|
||||
|
||||
/* FW state bits */
|
||||
#define CXL_FW_STATE_BITS 32
|
||||
#define CXL_FW_CANCEL BIT(0)
|
||||
|
||||
/**
|
||||
* struct cxl_fw_state - Firmware upload / activation state
|
||||
*
|
||||
* @state: fw_uploader state bitmask
|
||||
* @oneshot: whether the fw upload fits in a single transfer
|
||||
* @num_slots: Number of FW slots available
|
||||
* @cur_slot: Slot number currently active
|
||||
* @next_slot: Slot number for the new firmware
|
||||
*/
|
||||
struct cxl_fw_state {
|
||||
DECLARE_BITMAP(state, CXL_FW_STATE_BITS);
|
||||
bool oneshot;
|
||||
int num_slots;
|
||||
int cur_slot;
|
||||
int next_slot;
|
||||
};
|
||||
|
||||
/**
|
||||
* struct cxl_dev_state - The driver device state
|
||||
*
|
||||
|
|
@ -297,6 +376,7 @@ struct cxl_poison_state {
|
|||
* @serial: PCIe Device Serial Number
|
||||
* @event: event log driver state
|
||||
* @poison: poison driver state info
|
||||
* @fw: firmware upload / activation state
|
||||
* @mbox_send: @dev specific transport for transmitting mailbox commands
|
||||
*
|
||||
* See section 8.2.9.5.2 Capacity Configuration and Label Storage for
|
||||
|
|
@ -336,6 +416,7 @@ struct cxl_dev_state {
|
|||
|
||||
struct cxl_event_state event;
|
||||
struct cxl_poison_state poison;
|
||||
struct cxl_fw_state fw;
|
||||
|
||||
struct rcuwait mbox_wait;
|
||||
int (*mbox_send)(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd);
|
||||
|
|
@ -349,6 +430,7 @@ enum cxl_opcode {
|
|||
CXL_MBOX_OP_GET_EVT_INT_POLICY = 0x0102,
|
||||
CXL_MBOX_OP_SET_EVT_INT_POLICY = 0x0103,
|
||||
CXL_MBOX_OP_GET_FW_INFO = 0x0200,
|
||||
CXL_MBOX_OP_TRANSFER_FW = 0x0201,
|
||||
CXL_MBOX_OP_ACTIVATE_FW = 0x0202,
|
||||
CXL_MBOX_OP_SET_TIMESTAMP = 0x0301,
|
||||
CXL_MBOX_OP_GET_SUPPORTED_LOGS = 0x0400,
|
||||
|
|
|
|||
|
|
@ -842,6 +842,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|||
if (IS_ERR(cxlmd))
|
||||
return PTR_ERR(cxlmd);
|
||||
|
||||
rc = cxl_memdev_setup_fw_upload(cxlds);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
||||
rc = cxl_event_config(host_bridge, cxlds);
|
||||
if (rc)
|
||||
return rc;
|
||||
|
|
|
|||
Loading…
Reference in New Issue