x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table

The separation of the cpu_entry_area from the fixmap missed the fact that
on 32bit non-PAE kernels the cpu_entry_area mapping might not be covered in
initial_page_table by the previous synchronizations.

This results in suspend/resume failures because 32bit utilizes initial page
table for resume. The absence of the cpu_entry_area mapping results in a
triple fault, aka. insta reboot.

With PAE enabled this works by chance because the PGD entry which covers
the fixmap and other parts incindentally provides the cpu_entry_area
mapping as well.

Synchronize the initial page table after setting up the cpu entry
area. Instead of adding yet another copy of the same code, move it to a
function and invoke it from the various places.

It needs to be investigated if the existing calls in setup_arch() and
setup_per_cpu_areas() can be replaced by the later invocation from
setup_cpu_entry_areas(), but that's beyond the scope of this fix.

Fixes: 92a0f81d89 ("x86/cpu_entry_area: Move it out of the fixmap")
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Cc: William Grant <william.grant@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1802282137290.1392@nanos.tec.linutronix.de

arch/x86/include/asm/pgtable_32.h

@@ -32,6 +32,7 @@ extern pmd_t initial_pg_pmd[];
 static inline void pgtable_cache_init(void) { }
 static inline void check_pgt_cache(void) { }
 void paging_init(void);
+void sync_initial_page_table(void);
 
 /*
  * Define this if things work differently on an i386 and an i486:

arch/x86/include/asm/pgtable_64.h

@@ -28,6 +28,7 @@ extern pgd_t init_top_pgt[];
 #define swapper_pg_dir init_top_pgt
 
 extern void paging_init(void);
+static inline void sync_initial_page_table(void) { }
 
 #define pte_ERROR(e)					\
 	pr_err("%s:%d: bad pte %p(%016lx)\n",		\

arch/x86/kernel/setup.c

@@ -1204,20 +1204,13 @@ void __init setup_arch(char **cmdline_p)
 
 	kasan_init();
 
-#ifdef CONFIG_X86_32
-	/* sync back kernel address range */
-	clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY,
-			swapper_pg_dir     + KERNEL_PGD_BOUNDARY,
-			KERNEL_PGD_PTRS);
-
 	/*
-	 * sync back low identity map too.  It is used for example
-	 * in the 32-bit EFI stub.
+	 * Sync back kernel address range.
+	 *
+	 * FIXME: Can the later sync in setup_cpu_entry_areas() replace
+	 * this call?
 	 */
-	clone_pgd_range(initial_page_table,
-			swapper_pg_dir     + KERNEL_PGD_BOUNDARY,
-			min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
-#endif
+	sync_initial_page_table();
 
 	tboot_probe();
 

arch/x86/kernel/setup_percpu.c

@@ -287,24 +287,15 @@ void __init setup_per_cpu_areas(void)
 	/* Setup cpu initialized, callin, callout masks */
 	setup_cpu_local_masks();
 
-#ifdef CONFIG_X86_32
 	/*
 	 * Sync back kernel address range again.  We already did this in
 	 * setup_arch(), but percpu data also needs to be available in
 	 * the smpboot asm.  We can't reliably pick up percpu mappings
 	 * using vmalloc_fault(), because exception dispatch needs
 	 * percpu data.
+	 *
+	 * FIXME: Can the later sync in setup_cpu_entry_areas() replace
+	 * this call?
 	 */
-	clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY,
-			swapper_pg_dir     + KERNEL_PGD_BOUNDARY,
-			KERNEL_PGD_PTRS);
-
-	/*
-	 * sync back low identity map too.  It is used for example
-	 * in the 32-bit EFI stub.
-	 */
-	clone_pgd_range(initial_page_table,
-			swapper_pg_dir     + KERNEL_PGD_BOUNDARY,
-			min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
-#endif
+	sync_initial_page_table();
 }

arch/x86/mm/cpu_entry_area.c

@@ -163,4 +163,10 @@ void __init setup_cpu_entry_areas(void)
 
 	for_each_possible_cpu(cpu)
 		setup_cpu_entry_area(cpu);
+
+	/*
+	 * This is the last essential update to swapper_pgdir which needs
+	 * to be synchronized to initial_page_table on 32bit.
+	 */
+	sync_initial_page_table();
 }

arch/x86/mm/init_32.c

@@ -453,6 +453,21 @@ static inline void permanent_kmaps_init(pgd_t *pgd_base)
 }
 #endif /* CONFIG_HIGHMEM */
 
+void __init sync_initial_page_table(void)
+{
+	clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY,
+			swapper_pg_dir     + KERNEL_PGD_BOUNDARY,
+			KERNEL_PGD_PTRS);
+
+	/*
+	 * sync back low identity map too.  It is used for example
+	 * in the 32-bit EFI stub.
+	 */
+	clone_pgd_range(initial_page_table,
+			swapper_pg_dir     + KERNEL_PGD_BOUNDARY,
+			min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
+}
+
 void __init native_pagetable_init(void)
 {
 	unsigned long pfn, va;