UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

ARM: SoC fixes for v5.16, part 3 

There are a number of DT fixes, mostly for mistakes found through
 static checking of the dts files again, as well as a couple of
 minor changes to address incorrect DT settings.
 
 For i.MX, there is yet another series of devitree changes to update
 RGMII delay settings for ethernet, which is an ongoing problem after
 some driver changes.
 
 For SoC specific device drivers, a number of smaller fixes came up:
 
  - i.MX SoC identification was incorrectly registered non-i.MX
    machines when the driver is built-in
 
  - One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
    properly
 
  - a few compile fixes for warnings that get in the way of -Werror
 
  - a string overflow in the scpi firmware driver
 
  - a boot failure with FORTIFY_SOURCE on Rockchips machines
 
  - broken error handling in the AMD TEE driver
 
  - a revert for a tegra reset driver commit that broke HDA
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmG7TYMACgkQmmx57+YA
 GNm47Q//VP+oHAELnCVZ5WGcwz/0uMBgxLfzCxzSOHwKZpbd1W91aJn5OzwW6YWu
 r6AMZdRNBMA6jv9lCx2DsVSCiuFjiSgHfqbPrL8F8xb4plwTs7pZw2b37bXgD0G6
 fJwN0/lIP0tMJBLHzNWB3BveOJOOpqWsggIEtNW9we+jnhHMDCY7YKgTuzSvt3rR
 I1mZZk5ZECILCziVBaY+IPEV4MMcm0z9IHCbckbnBsYPMP6Mf75guQvpdPQZHaJl
 gTivB1/HLaYCbyJV1i/UyVTe06sKqeVNP8Bj3JMSrR755V6PqwkWhJOFKNtHMkhu
 7sY5/Ie4hbpB5sx/0wXCRbOpSPnuEK3mYBKzBkh6ARBFXEDbLmTtCKKNaOLXiOtj
 XEmgqGj3qCkidUDeR/yePpEuVkFeNrtT6G1C64IQWmM8OHYMYoGSC29nViwtNv3O
 XjSRESvZeQVKr9WmGuF6SnvGrPh6Olovw7MedrT8iY7PB7YDTju8PBqh6/bTfTIN
 SchIP/umYEwduuIYdb2arNNPJ4MwmgDdlsxx8A0UEBhIRGXekNrwPTG9YpdJve5P
 Tiu+m3ubdQ6bkFHyx14jZtqC37vazlZjiCY3kiB0VqMFvYZ1e+JG9zwjofAqU7rG
 18I5Vq8AtPcpBcyFItW5oqcDiv0GYggxkjRihJzt13gB0L+iTsE=
 =04HK
 -----END PGP SIGNATURE-----

Merge tag 'soc-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "There are a number of DT fixes, mostly for mistakes found through
  static checking of the dts files again, as well as a couple of minor
  changes to address incorrect DT settings.

  For i.MX, there is yet another series of devitree changes to update
  RGMII delay settings for ethernet, which is an ongoing problem after
  some driver changes.

  For SoC specific device drivers, a number of smaller fixes came up:

   - i.MX SoC identification was incorrectly registered non-i.MX
     machines when the driver is built-in

   - One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
     properly

   - a few compile fixes for warnings that get in the way of -Werror

   - a string overflow in the scpi firmware driver

   - a boot failure with FORTIFY_SOURCE on Rockchips machines

   - broken error handling in the AMD TEE driver

   - a revert for a tegra reset driver commit that broke HDA"

* tag 'soc-fixes-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (25 commits)
  soc/tegra: fuse: Fix bitwise vs. logical OR warning
  firmware: arm_scpi: Fix string overflow in SCPI genpd driver
  soc: imx: Register SoC device only on i.MX boards
  soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
  ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
  arm64: dts: imx8mq: remove interconnect property from lcdif
  ARM: socfpga: dts: fix qspi node compatible
  arm64: dts: apple: add #interrupt-cells property to pinctrl nodes
  dt-bindings: i2c: apple,i2c: allow multiple compatibles
  arm64: meson: remove COMMON_CLK
  arm64: meson: fix dts for JetHub D1
  tee: amdtee: fix an IS_ERR() vs NULL bug
  arm64: dts: apple: change ethernet0 device type to ethernet
  arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys
  arm64: dts: rockchip: fix poweroff on helios64
  arm64: dts: rockchip: fix audio-supply for Rock Pi 4
  arm64: dts: rockchip: fix rk3399-leez-p710 vcc3v3-lan supply
  arm64: dts: rockchip: fix rk3308-roc-cc vcc-sd supply
  arm64: dts: rockchip: remove mmc-hs400-enhanced-strobe from rk3399-khadas-edge
  ARM: rockchip: Use memcpy_toio instead of memcpy on smp bring-up
  ...
This commit is contained in:
Linus Torvalds 2021-12-16 14:48:57 -08:00
parent a52a8e9eaf 4bc73b7d48
commit 93db8300f6
32 changed files with 84 additions and 57 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Documentation/devicetree/bindings/i2c/apple,i2c.yaml
View File

@ -20,9 +20,9 @@ allOf:
properties:
compatible:
enum:
- apple,t8103-i2c
- apple,i2c
items:
- const: apple,t8103-i2c
- const: apple,i2c
reg:
maxItems: 1
@ -51,7 +51,7 @@ unevaluatedProperties: false
examples:
- |
i2c@35010000 {
compatible = "apple,t8103-i2c";
compatible = "apple,t8103-i2c", "apple,i2c";
reg = <0x35010000 0x4000>;
interrupt-parent = <&aic>;
interrupts = <0 627 4>;

2
arch/arm/boot/dts/imx6qp-prtwd3.dts
View File

@ -178,6 +178,8 @@
label = "cpu";
ethernet = <&fec>;
phy-mode = "rgmii-id";
rx-internal-delay-ps = <2000>;
tx-internal-delay-ps = <2000>;
fixed-link {
speed = <100>;

2
arch/arm/boot/dts/imx6ull-pinfunc.h
View File

@ -82,6 +82,6 @@
#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0
#define MX6ULL_PAD_CSI_DATA07__ESAI_TX0 0x0200 0x048C 0x0000 0x9 0x0
#endif /* __DTS_IMX6ULL_PINFUNC_H */

2
arch/arm/boot/dts/ls1021a-tsn.dts
View File

@ -91,6 +91,8 @@
/* Internal port connected to eth2 */
ethernet = <&enet2>;
phy-mode = "rgmii";
rx-internal-delay-ps = <0>;
tx-internal-delay-ps = <0>;
reg = <4>;
fixed-link {

2
arch/arm/boot/dts/socfpga_arria10_socdk_qspi.dts
View File

@ -12,7 +12,7 @@
flash0: n25q00@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q00aa";
compatible = "micron,mt25qu02g", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <100000000>;

2
arch/arm/boot/dts/socfpga_arria5_socdk.dts
View File

@ -119,7 +119,7 @@
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q256a";
compatible = "micron,n25q256a", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <100000000>;

2
arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
View File

@ -124,7 +124,7 @@
flash0: n25q00@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q00";
compatible = "micron,mt25qu02g", "jedec,spi-nor";
reg = <0>; /* chip select */
spi-max-frequency = <100000000>;

2
arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
View File

@ -169,7 +169,7 @@
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q00";
compatible = "micron,mt25qu02g", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <100000000>;

2
arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
View File

@ -80,7 +80,7 @@
flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q256a";
compatible = "micron,n25q256a", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <100000000>;
m25p,fast-read;

2
arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
View File

@ -116,7 +116,7 @@
flash0: n25q512a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q512a";
compatible = "micron,n25q512a", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <100000000>;

4
arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
View File

@ -224,7 +224,7 @@
n25q128@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q128";
compatible = "micron,n25q128", "jedec,spi-nor";
reg = <0>; /* chip select */
spi-max-frequency = <100000000>;
m25p,fast-read;
@ -241,7 +241,7 @@
n25q00@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "n25q00";
compatible = "micron,mt25qu02g", "jedec,spi-nor";
reg = <1>; /* chip select */
spi-max-frequency = <100000000>;
m25p,fast-read;

2
arch/arm/mach-rockchip/platsmp.c
View File

@ -189,7 +189,7 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node)
rockchip_boot_fn = __pa_symbol(secondary_startup);
/* copy the trampoline to sram, that runs during startup of the core */
memcpy(sram_base_addr, &rockchip_secondary_trampoline, trampoline_sz);
memcpy_toio(sram_base_addr, &rockchip_secondary_trampoline, trampoline_sz);
flush_cache_all();
outer_clean_range(0, trampoline_sz);

1
arch/arm64/Kconfig.platforms
View File

@ -161,7 +161,6 @@ config ARCH_MEDIATEK
config ARCH_MESON
bool "Amlogic Platforms"
select COMMON_CLK
help
This enables support for the arm64 based Amlogic SoCs
such as the s905, S905X/D, S912, A113X/D or S905X/D2

30
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
View File

@ -134,23 +134,23 @@
type = "critical";
};
};
};
cpu_cooling_maps: cooling-maps {
map0 {
trip = <&cpu_passive>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
cpu_cooling_maps: cooling-maps {
map0 {
trip = <&cpu_passive>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
map1 {
trip = <&cpu_hot>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
map1 {
trip = <&cpu_hot>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};

2
arch/arm64/boot/dts/apple/t8103-j274.dts
View File

@ -60,7 +60,7 @@
&port02 {
bus-range = <3 3>;
ethernet0: pci@0,0 {
ethernet0: ethernet@0,0 {
reg = <0x30000 0x0 0x0 0x0 0x0>;
/* To be filled by the loader */
local-mac-address = [00 10 18 00 00 00];

4
arch/arm64/boot/dts/apple/t8103.dtsi
View File

@ -144,6 +144,7 @@
apple,npins = <212>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 190 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 191 IRQ_TYPE_LEVEL_HIGH>,
@ -170,6 +171,7 @@
apple,npins = <42>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 269 IRQ_TYPE_LEVEL_HIGH>,
@ -190,6 +192,7 @@
apple,npins = <23>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 330 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 331 IRQ_TYPE_LEVEL_HIGH>,
@ -210,6 +213,7 @@
apple,npins = <16>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&aic>;
interrupts = <AIC_IRQ 391 IRQ_TYPE_LEVEL_HIGH>,
<AIC_IRQ 392 IRQ_TYPE_LEVEL_HIGH>,

2
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
View File

@ -38,7 +38,6 @@
powerdn {
label = "External Power Down";
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
interrupts = <&gpio1 17 IRQ_TYPE_EDGE_FALLING>;
linux,code = <KEY_POWER>;
};
@ -46,7 +45,6 @@
admin {
label = "ADMIN button";
gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
interrupts = <&gpio3 8 IRQ_TYPE_EDGE_RISING>;
linux,code = <KEY_WPS_BUTTON>;
};
};

4
arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts
View File

@ -386,6 +386,8 @@
reg = <2>;
ethernet = <&dpmac17>;
phy-mode = "rgmii-id";
rx-internal-delay-ps = <2000>;
tx-internal-delay-ps = <2000>;
fixed-link {
speed = <1000>;
@ -529,6 +531,8 @@
reg = <2>;
ethernet = <&dpmac18>;
phy-mode = "rgmii-id";
rx-internal-delay-ps = <2000>;
tx-internal-delay-ps = <2000>;
fixed-link {
speed = <1000>;

2
arch/arm64/boot/dts/freescale/imx8mq.dtsi
View File

@ -524,8 +524,6 @@
<&clk IMX8MQ_VIDEO_PLL1>,
<&clk IMX8MQ_VIDEO_PLL1_OUT>;
assigned-clock-rates = <0>, <0>, <0>, <594000000>;
interconnects = <&noc IMX8MQ_ICM_LCDIF &noc IMX8MQ_ICS_DRAM>;
interconnect-names = "dram";
status = "disabled";
port@0 {

2
arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts
View File

@ -97,7 +97,7 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
vim-supply = <&vcc_io>;
vin-supply = <&vcc_io>;
};
vdd_core: vdd-core {

1
arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
View File

@ -705,7 +705,6 @@
&sdhci {
bus-width = <8>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
non-removable;
status = "okay";
};

1
arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
View File

@ -276,6 +276,7 @@
clock-output-names = "xin32k", "rk808-clkout2";
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;

2
arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
View File

@ -55,7 +55,7 @@
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vim-supply = <&vcc3v3_sys>;
vin-supply = <&vcc3v3_sys>;
};
vcc3v3_sys: vcc3v3-sys {

2
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
View File

@ -502,7 +502,7 @@
status = "okay";
bt656-supply = <&vcc_3v0>;
audio-supply = <&vcc_3v0>;
audio-supply = <&vcc1v8_codec>;
sdmmc-supply = <&vcc_sdio>;
gpio1830-supply = <&vcc_3v0>;
};

10
drivers/firmware/scpi_pm_domain.c
View File

@ -16,7 +16,6 @@ struct scpi_pm_domain {
struct generic_pm_domain genpd;
struct scpi_ops *ops;
u32 domain;
char name[30];
};
/*
@ -110,8 +109,13 @@ static int scpi_pm_domain_probe(struct platform_device *pdev)
scpi_pd->domain = i;
scpi_pd->ops = scpi_ops;
sprintf(scpi_pd->name, "%pOFn.%d", np, i);
scpi_pd->genpd.name = scpi_pd->name;
scpi_pd->genpd.name = devm_kasprintf(dev, GFP_KERNEL,
"%pOFn.%d", np, i);
if (!scpi_pd->genpd.name) {
dev_err(dev, "Failed to allocate genpd name:%pOFn.%d\n",
np, i);
continue;
}
scpi_pd->genpd.power_off = scpi_pd_power_off;
scpi_pd->genpd.power_on = scpi_pd_power_on;

5
drivers/firmware/tegra/bpmp-debugfs.c
View File

@ -77,13 +77,14 @@ static const char *get_filename(struct tegra_bpmp *bpmp,
const char *root_path, *filename = NULL;
char *root_path_buf;
size_t root_len;
size_t root_path_buf_len = 512;
root_path_buf = kzalloc(512, GFP_KERNEL);
root_path_buf = kzalloc(root_path_buf_len, GFP_KERNEL);
if (!root_path_buf)
goto out;
root_path = dentry_path(bpmp->debugfs_mirror, root_path_buf,
sizeof(root_path_buf));
root_path_buf_len);
if (IS_ERR(root_path))
goto out;

9
drivers/reset/tegra/reset-bpmp.c
View File

@ -20,7 +20,6 @@ static int tegra_bpmp_reset_common(struct reset_controller_dev *rstc,
struct tegra_bpmp *bpmp = to_tegra_bpmp(rstc);
struct mrq_reset_request request;
struct tegra_bpmp_message msg;
int err;
memset(&request, 0, sizeof(request));
request.cmd = command;
@ -31,13 +30,7 @@ static int tegra_bpmp_reset_common(struct reset_controller_dev *rstc,
msg.tx.data = &request;
msg.tx.size = sizeof(request);
err = tegra_bpmp_transfer(bpmp, &msg);
if (err)
return err;
if (msg.rx.ret)
return -EINVAL;
return 0;
return tegra_bpmp_transfer(bpmp, &msg);
}
static int tegra_bpmp_reset_module(struct reset_controller_dev *rstc,

19
drivers/soc/imx/imx8m-blk-ctrl.c
View File

@ -17,6 +17,7 @@
#define BLK_SFT_RSTN 0x0
#define BLK_CLK_EN 0x4
#define BLK_MIPI_RESET_DIV 0x8 /* Mini/Nano DISPLAY_BLK_CTRL only */
struct imx8m_blk_ctrl_domain;
@ -36,6 +37,15 @@ struct imx8m_blk_ctrl_domain_data {
const char *gpc_name;
u32 rst_mask;
u32 clk_mask;
/*
* i.MX8M Mini and Nano have a third DISPLAY_BLK_CTRL register
* which is used to control the reset for the MIPI Phy.
* Since it's only present in certain circumstances,
* an if-statement should be used before setting and clearing this
* register.
*/
u32 mipi_phy_rst_mask;
};
#define DOMAIN_MAX_CLKS 3
@ -78,6 +88,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
/* put devices into reset */
regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
if (data->mipi_phy_rst_mask)
regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
/* enable upstream and blk-ctrl clocks to allow reset to propagate */
ret = clk_bulk_prepare_enable(data->num_clks, domain->clks);
@ -99,6 +111,8 @@ static int imx8m_blk_ctrl_power_on(struct generic_pm_domain *genpd)
/* release reset */
regmap_set_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
if (data->mipi_phy_rst_mask)
regmap_set_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
/* disable upstream clocks */
clk_bulk_disable_unprepare(data->num_clks, domain->clks);
@ -120,6 +134,9 @@ static int imx8m_blk_ctrl_power_off(struct generic_pm_domain *genpd)
struct imx8m_blk_ctrl *bc = domain->bc;
/* put devices into reset and disable clocks */
if (data->mipi_phy_rst_mask)
regmap_clear_bits(bc->regmap, BLK_MIPI_RESET_DIV, data->mipi_phy_rst_mask);
regmap_clear_bits(bc->regmap, BLK_SFT_RSTN, data->rst_mask);
regmap_clear_bits(bc->regmap, BLK_CLK_EN, data->clk_mask);
@ -480,6 +497,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
.gpc_name = "mipi-dsi",
.rst_mask = BIT(5),
.clk_mask = BIT(8) | BIT(9),
.mipi_phy_rst_mask = BIT(17),
},
[IMX8MM_DISPBLK_PD_MIPI_CSI] = {
.name = "dispblk-mipi-csi",
@ -488,6 +506,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mm_disp_blk_ctl_domain_data[]
.gpc_name = "mipi-csi",
.rst_mask = BIT(3) | BIT(4),
.clk_mask = BIT(10) | BIT(11),
.mipi_phy_rst_mask = BIT(16),
},
};

4
drivers/soc/imx/soc-imx.c
View File

@ -36,6 +36,10 @@ static int __init imx_soc_device_init(void)
int ret;
int i;
/* Return early if this is running on devices with different SoCs */
if (!__mxc_cpu_type)
return 0;
if (of_machine_is_compatible("fsl,ls1021a"))
return 0;

2
drivers/soc/tegra/fuse/fuse-tegra.c
View File

@ -320,7 +320,7 @@ static struct platform_driver tegra_fuse_driver = {
};
builtin_platform_driver(tegra_fuse_driver);
bool __init tegra_fuse_read_spare(unsigned int spare)
u32 __init tegra_fuse_read_spare(unsigned int spare)
{
unsigned int offset = fuse->soc->info->spare + spare * 4;

2
drivers/soc/tegra/fuse/fuse.h
View File

@ -65,7 +65,7 @@ struct tegra_fuse {
void tegra_init_revision(void);
void tegra_init_apbmisc(void);
bool __init tegra_fuse_read_spare(unsigned int spare);
u32 __init tegra_fuse_read_spare(unsigned int spare);
u32 __init tegra_fuse_read_early(unsigned int offset);
u8 tegra_get_major_rev(void);

5
drivers/tee/amdtee/core.c
View File

@ -203,9 +203,8 @@ static int copy_ta_binary(struct tee_context *ctx, void *ptr, void **ta,
*ta_size = roundup(fw->size, PAGE_SIZE);
*ta = (void *)__get_free_pages(GFP_KERNEL, get_order(*ta_size));
if (IS_ERR(*ta)) {
pr_err("%s: get_free_pages failed 0x%llx\n", __func__,
(u64)*ta);
if (!*ta) {
pr_err("%s: get_free_pages failed\n", __func__);
rc = -ENOMEM;
goto rel_fw;
}