V4L/DVB (9223): MFE: Fix a number of bugs and some tidying up

A number of reference to videobuf_dvb_get_frontend used an invalid
index. This has been fixed.

The section for the HVR3000 in advise_acquire was redundant as
the same logic is used on the HVR4000. This has been removed
and both cards now use the same function.

A number of small errors and whitespace errors are also fixed.

Signed-off-by: Darron Broad <darron@kewl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/cx23885/cx23885-dvb.c

@@ -314,7 +314,7 @@ static int dvb_register(struct cx23885_tsport *port)
 	struct cx23885_i2c *i2c_bus = NULL;
 	struct videobuf_dvb_frontend *fe0;
 
-	fe0 = videobuf_dvb_get_frontend(&port->frontends, 0);
+	fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
 	if (!fe0)
 		return -EINVAL;
 
@@ -336,7 +336,7 @@ static int dvb_register(struct cx23885_tsport *port)
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR1800:
 		i2c_bus = &dev->i2c_bus[0];
-		switch (alt_tuner) { // XXXXXX multifrontend?
+		switch (alt_tuner) {
 		case 1:
 			fe0->dvb.frontend =
 				dvb_attach(s5h1409_attach,
@@ -554,7 +554,7 @@ int cx23885_dvb_register(struct cx23885_tsport *port)
 	struct cx23885_dev *dev = port->dev;
 	int err;
 
-	fe0 = videobuf_dvb_get_frontend(&port->frontends, 0);
+	fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
 	if (!fe0)
 		err = -EINVAL;
 
@@ -583,7 +583,7 @@ int cx23885_dvb_unregister(struct cx23885_tsport *port)
 {
 	struct videobuf_dvb_frontend *fe0;
 
-	fe0 = videobuf_dvb_get_frontend(&port->frontends, 0);
+	fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
 	/* dvb */
 	if(fe0->dvb.frontend)
 		videobuf_dvb_unregister_bus(&port->frontends);

drivers/media/video/cx88/cx88-cards.c

@@ -3004,7 +3004,6 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
 		cx88_card_list(core, pci);
 	}
 
-	memset(&core->board, 0, sizeof(core->board));
 	memcpy(&core->board, &cx88_boards[core->boardnr], sizeof(core->board));
 
 	if (!core->board.num_frontends)

drivers/media/video/cx88/cx88-dvb.c

@@ -124,7 +124,6 @@ static int cx88_dvb_bus_ctrl(struct dvb_frontend* fe, int acquire)
 		return -EINVAL;
 	}
 
-
 	drv = cx8802_get_driver(dev, CX88_MPEG_DVB);
 	if (drv) {
 		if (acquire){
@@ -502,7 +501,7 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
 		.ctrl      = &ctl,
 	};
 
-/* Get the first frontend */
+	/* Get the first frontend */
 	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
 	if (!fe0)
 		return -EINVAL;
@@ -1136,35 +1135,7 @@ static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
 		udelay(1000);
 		break;
 
-	case CX88_BOARD_HAUPPAUGE_HVR3000: /* ? */
+	case CX88_BOARD_HAUPPAUGE_HVR3000:
-		if(core->dvbdev->frontends.active_fe_id == 1) {
-			/* DVB-S/S2 Enabled */
-
-			/* Toggle reset on cx22702 leaving i2c active */
-			cx_write(MO_GP0_IO, core->board.input[0].gpio0);
-			udelay(1000);
-			cx_clear(MO_GP0_IO, 0x00000080);
-			udelay(50);
-			cx_set(MO_GP0_IO, 0x00000080); /* cx22702 out of reset */
-			cx_set(MO_GP0_IO, 0x00000004); /* tri-state the cx22702 pins */
-			udelay(1000);
-
-			cx_write(MO_SRST_IO, 1); /* Take the cx24116/cx24123 out of reset */
-			core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */
-		} else
-		if (core->dvbdev->frontends.active_fe_id == 2) {
-			/* DVB-T Enabled */
-
-			/* Put the cx24116/cx24123 into reset */
-			cx_write(MO_SRST_IO, 0);
-
-			/* cx22702 out of reset and enable it */
-			cx_set(MO_GP0_IO,   0x00000080);
-			cx_clear(MO_GP0_IO, 0x00000004);
-			core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */
-			udelay(1000);
-		}
-		break;
 	case CX88_BOARD_HAUPPAUGE_HVR4000:
 		if(core->dvbdev->frontends.active_fe_id == 1) {
 			/* DVB-S/S2 Enabled */
@@ -1225,7 +1196,7 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
 {
 	struct cx88_core *core = drv->core;
 	struct cx8802_dev *dev = drv->core->dvbdev;
-	int err,i;
+	int err, i;
 	struct videobuf_dvb_frontend *fe;
 
 	dprintk( 1, "%s\n", __func__);
@@ -1267,8 +1238,7 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
 	if (err != 0)
 		printk(KERN_ERR "%s/2: dvb_register failed (err = %d)\n",
 		       core->name, err);
-
+fail_core:
- fail_core:
 	return err;
 }
 

drivers/media/video/cx88/cx88-input.c

@@ -495,7 +495,6 @@ void cx88_ir_irq(struct cx88_core *core)
 	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
 		ircode = ir_decode_biphase(ir->samples, ir->scount, 5, 7);
 		ir_dprintk("biphase decoded: %x\n", ircode);
-//TODO Darron has other code here
 		if ((ircode & 0xfffff000) != 0x3000)
 			break;
 		ir_input_keydown(ir->input, &ir->ir, ircode & 0x3f, ircode);

drivers/media/video/saa7134/saa7134-dvb.c

@@ -537,7 +537,8 @@ static int configure_tda827x_fe(struct saa7134_dev *dev,
 {
 	struct videobuf_dvb_frontend *fe0;
 
-	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 0);
+	/* Get the first frontend */
+	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
 
 	fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
 	if (fe0->dvb.frontend) {
@@ -951,7 +952,7 @@ static int dvb_init(struct saa7134_dev *dev)
 	struct videobuf_dvb_frontend *fe0;
 
 	/* Get the first frontend */
-	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 0);
+	fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1);
 	if (!fe0)
 		return -EINVAL;
 
@@ -1070,7 +1071,7 @@ static int dvb_init(struct saa7134_dev *dev)
 					 &tda827x_cfg_0) < 0)
 			goto dettach_frontend;
 		break;
-	case SAA7134_BOARD_FLYDVB_TRIO: // XXXXXX multifrontend
+	case SAA7134_BOARD_FLYDVB_TRIO:
 		if (!use_frontend) {	/* terrestrial */
 			if (configure_tda827x_fe(dev, &lifeview_trio_config,
 						 &tda827x_cfg_0) < 0)

drivers/media/video/videobuf-dvb.c

@@ -229,7 +229,6 @@ int videobuf_dvb_register_frontend(struct dvb_adapter *adapter, struct videobuf_
 	dvb->dmxdev.filternum    = 256;
 	dvb->dmxdev.demux        = &dvb->demux.dmx;
 	dvb->dmxdev.capabilities = 0;
-	//result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
 	result = dvb_dmxdev_init(&dvb->dmxdev, adapter);
 
 	if (result < 0) {
@@ -277,7 +276,7 @@ fail_dmx:
 	dvb_unregister_frontend(dvb->frontend);
 fail_frontend:
 	dvb_frontend_detach(dvb->frontend);
-	dvb_unregister_adapter(&dvb->adapter);
+	dvb_unregister_adapter(adapter);
 
 	return result;
 }