iio: adc: meson: init voltage control bits
Define and init voltage configuration bits. Those bits are inited in vendor boot code (bl2, bl33) already so do it in the driver to not depend on other code. Introduced bits: REG11[0] - selects Vref. 0 - calibration voltage, 1 - VDDA. txlx and later SoCs support VDDA or calibration voltage as Vref, but others support only calibration voltage. For newer platforms vendor uses VDDA as default. REG11[1] - reserved bit. g12a and later SoCs must write 1, others SoCs write 0. REG11[5] - Vref voltage. 0 - 0.9v, 1 - 1.8v. g12a and later SoCs must write 0, others SoCs write 1. REG11[6] - selects common-mode voltage, 0: from AVDD, 1: from Vref. g12a and later SoCs must write 0, others SoCs write 1. Signed-off-by: George Stark <gnstark@sberdevices.ru> Link: https://lore.kernel.org/r/20230715110654.6035-4-gnstark@sberdevices.ru Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
parent
d1adcaf7a4
commit
90c6241860
|
@ -156,6 +156,10 @@
|
|||
*/
|
||||
#define MESON_SAR_ADC_REG11 0x2c
|
||||
#define MESON_SAR_ADC_REG11_BANDGAP_EN BIT(13)
|
||||
#define MESON_SAR_ADC_REG11_CMV_SEL BIT(6)
|
||||
#define MESON_SAR_ADC_REG11_VREF_VOLTAGE BIT(5)
|
||||
#define MESON_SAR_ADC_REG11_EOC BIT(1)
|
||||
#define MESON_SAR_ADC_REG11_VREF_SEL BIT(0)
|
||||
|
||||
#define MESON_SAR_ADC_REG13 0x34
|
||||
#define MESON_SAR_ADC_REG13_12BIT_CALIBRATION_MASK GENMASK(13, 8)
|
||||
|
@ -216,6 +220,11 @@
|
|||
.datasheet_name = "SAR_ADC_MUX_"#_sel, \
|
||||
}
|
||||
|
||||
enum meson_sar_adc_vref_sel {
|
||||
VREF_CALIBATION_VOLTAGE = 0,
|
||||
VREF_VDDA = 1,
|
||||
};
|
||||
|
||||
enum meson_sar_adc_avg_mode {
|
||||
NO_AVERAGING = 0x0,
|
||||
MEAN_AVERAGING = 0x1,
|
||||
|
@ -314,6 +323,12 @@ struct meson_sar_adc_param {
|
|||
unsigned int temperature_multiplier;
|
||||
unsigned int temperature_divider;
|
||||
u8 disable_ring_counter;
|
||||
bool has_reg11;
|
||||
bool has_vref_select;
|
||||
u8 vref_select;
|
||||
u8 cmv_select;
|
||||
u8 adc_eoc;
|
||||
enum meson_sar_adc_vref_sel vref_volatge;
|
||||
};
|
||||
|
||||
struct meson_sar_adc_data {
|
||||
|
@ -974,6 +989,29 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
|
|||
MESON_SAR_ADC_REG3_CTRL_CONT_RING_COUNTER_EN,
|
||||
regval);
|
||||
|
||||
if (priv->param->has_reg11) {
|
||||
regval = FIELD_PREP(MESON_SAR_ADC_REG11_EOC, priv->param->adc_eoc);
|
||||
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
|
||||
MESON_SAR_ADC_REG11_EOC, regval);
|
||||
|
||||
if (priv->param->has_vref_select) {
|
||||
regval = FIELD_PREP(MESON_SAR_ADC_REG11_VREF_SEL,
|
||||
priv->param->vref_select);
|
||||
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
|
||||
MESON_SAR_ADC_REG11_VREF_SEL, regval);
|
||||
}
|
||||
|
||||
regval = FIELD_PREP(MESON_SAR_ADC_REG11_VREF_VOLTAGE,
|
||||
priv->param->vref_volatge);
|
||||
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
|
||||
MESON_SAR_ADC_REG11_VREF_VOLTAGE, regval);
|
||||
|
||||
regval = FIELD_PREP(MESON_SAR_ADC_REG11_CMV_SEL,
|
||||
priv->param->cmv_select);
|
||||
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
|
||||
MESON_SAR_ADC_REG11_CMV_SEL, regval);
|
||||
}
|
||||
|
||||
ret = clk_set_parent(priv->adc_sel_clk, priv->clkin);
|
||||
if (ret)
|
||||
return dev_err_probe(dev, ret, "failed to set adc parent to clkin\n");
|
||||
|
@ -1195,6 +1233,9 @@ static const struct meson_sar_adc_param meson_sar_adc_gxbb_param = {
|
|||
.bandgap_reg = MESON_SAR_ADC_REG11,
|
||||
.regmap_config = &meson_sar_adc_regmap_config_gxbb,
|
||||
.resolution = 10,
|
||||
.has_reg11 = true,
|
||||
.vref_volatge = 1,
|
||||
.cmv_select = 1,
|
||||
};
|
||||
|
||||
static const struct meson_sar_adc_param meson_sar_adc_gxl_param = {
|
||||
|
@ -1204,6 +1245,9 @@ static const struct meson_sar_adc_param meson_sar_adc_gxl_param = {
|
|||
.regmap_config = &meson_sar_adc_regmap_config_gxbb,
|
||||
.resolution = 12,
|
||||
.disable_ring_counter = 1,
|
||||
.has_reg11 = true,
|
||||
.vref_volatge = 1,
|
||||
.cmv_select = 1,
|
||||
};
|
||||
|
||||
static const struct meson_sar_adc_param meson_sar_adc_g12a_param = {
|
||||
|
@ -1213,6 +1257,10 @@ static const struct meson_sar_adc_param meson_sar_adc_g12a_param = {
|
|||
.regmap_config = &meson_sar_adc_regmap_config_gxbb,
|
||||
.resolution = 12,
|
||||
.disable_ring_counter = 1,
|
||||
.has_reg11 = true,
|
||||
.adc_eoc = 1,
|
||||
.has_vref_select = true,
|
||||
.vref_select = VREF_VDDA,
|
||||
};
|
||||
|
||||
static const struct meson_sar_adc_data meson_sar_adc_meson8_data = {
|
||||
|
|
Loading…
Reference in New Issue