UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

usb: doc: Update document for USB3 debug port usage 

Update Documentation/driver-api/usb/usb3-debug-port.rst. This update
includes the guide for using xHCI debug capability based TTY serial
link.

Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This commit is contained in:
Lu Baolu 2017-12-13 13:07:44 +08:00 committed by Jonathan Corbet
parent 481f272004
commit 90b2a01e68
1 changed files with 52 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

52
Documentation/driver-api/usb/usb3-debug-port.rst
View File

@ -98,3 +98,55 @@ you to check the sanity of the setup.
cat /dev/ttyUSB0
done
===== end of bash scripts ===============
Serial TTY
==========
The DbC support has been added to the xHCI driver. You can get a
debug device provided by the DbC at runtime.
In order to use this, you need to make sure your kernel has been
configured to support USB_XHCI_DBGCAP. A sysfs attribute under
the xHCI device node is used to enable or disable DbC. By default,
DbC is disabled::
root@target:/sys/bus/pci/devices/0000:00:14.0# cat dbc
disabled
Enable DbC with the following command::
root@target:/sys/bus/pci/devices/0000:00:14.0# echo enable > dbc
You can check the DbC state at anytime::
root@target:/sys/bus/pci/devices/0000:00:14.0# cat dbc
enabled
Connect the debug target to the debug host with a USB 3.0 super-
speed A-to-A debugging cable. You can see /dev/ttyDBC0 created
on the debug target. You will see below kernel message lines::
root@target: tail -f /var/log/kern.log
[ 182.730103] xhci_hcd 0000:00:14.0: DbC connected
[ 191.169420] xhci_hcd 0000:00:14.0: DbC configured
[ 191.169597] xhci_hcd 0000:00:14.0: DbC now attached to /dev/ttyDBC0
Accordingly, the DbC state has been brought up to::
root@target:/sys/bus/pci/devices/0000:00:14.0# cat dbc
configured
On the debug host, you will see the debug device has been enumerated.
You will see below kernel message lines::
root@host: tail -f /var/log/kern.log
[ 79.454780] usb 2-2.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 79.475003] usb 2-2.1: LPM exit latency is zeroed, disabling LPM.
[ 79.475389] usb 2-2.1: New USB device found, idVendor=1d6b, idProduct=0010
[ 79.475390] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 79.475391] usb 2-2.1: Product: Linux USB Debug Target
[ 79.475392] usb 2-2.1: Manufacturer: Linux Foundation
[ 79.475393] usb 2-2.1: SerialNumber: 0001
The debug device works now. You can use any communication or debugging
program to talk between the host and the target.