diff --git a/Documentation/devicetree/bindings/media/renesas,vin.txt b/Documentation/devicetree/bindings/media/renesas,vin.txt deleted file mode 100644 index 5eefd62ac5c5..000000000000 --- a/Documentation/devicetree/bindings/media/renesas,vin.txt +++ /dev/null @@ -1,217 +0,0 @@ -Renesas R-Car Video Input driver (rcar_vin) -------------------------------------------- - -The rcar_vin device provides video input capabilities for the Renesas R-Car -family of devices. - -Each VIN instance has a single parallel input that supports RGB and YUV video, -with both external synchronization and BT.656 synchronization for the latter. -Depending on the instance the VIN input is connected to external SoC pins, or -on Gen3 and RZ/G2 platforms to a CSI-2 receiver. - - - compatible: Must be one or more of the following - - "renesas,vin-r8a7743" for the R8A7743 device - - "renesas,vin-r8a7744" for the R8A7744 device - - "renesas,vin-r8a7745" for the R8A7745 device - - "renesas,vin-r8a77470" for the R8A77470 device - - "renesas,vin-r8a774a1" for the R8A774A1 device - - "renesas,vin-r8a774b1" for the R8A774B1 device - - "renesas,vin-r8a774c0" for the R8A774C0 device - - "renesas,vin-r8a7778" for the R8A7778 device - - "renesas,vin-r8a7779" for the R8A7779 device - - "renesas,vin-r8a7790" for the R8A7790 device - - "renesas,vin-r8a7791" for the R8A7791 device - - "renesas,vin-r8a7792" for the R8A7792 device - - "renesas,vin-r8a7793" for the R8A7793 device - - "renesas,vin-r8a7794" for the R8A7794 device - - "renesas,vin-r8a7795" for the R8A7795 device - - "renesas,vin-r8a7796" for the R8A7796 device - - "renesas,vin-r8a77965" for the R8A77965 device - - "renesas,vin-r8a77970" for the R8A77970 device - - "renesas,vin-r8a77980" for the R8A77980 device - - "renesas,vin-r8a77990" for the R8A77990 device - - "renesas,vin-r8a77995" for the R8A77995 device - - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible - device. - - When compatible with the generic version nodes must list the - SoC-specific version corresponding to the platform first - followed by the generic version. - - - reg: the register base and size for the device registers - - interrupts: the interrupt for the device - - clocks: Reference to the parent clock - -The per-board settings for Gen2 and RZ/G1 platforms: - -- port - sub-node describing a single endpoint connected to the VIN - from external SoC pins as described in video-interfaces.txt[1]. - Only the first one will be considered as each vin interface has one - input port. - - - Optional properties for endpoint nodes: - - hsync-active: see [1] for description. Default is active high. - - vsync-active: see [1] for description. Default is active high. - If both HSYNC and VSYNC polarities are not specified, embedded - synchronization is selected. - - field-active-even: see [1] for description. Default is active high. - - bus-width: see [1] for description. The selected bus width depends on - the SoC type and selected input image format. - Valid values are: 8, 10, 12, 16, 24 and 32. - - data-shift: see [1] for description. Valid values are 0 and 8. - - data-enable-active: polarity of CLKENB signal, see [1] for - description. Default is active high. - -The per-board settings for Gen3 and RZ/G2 platforms: - -Gen3 and RZ/G2 platforms can support both a single connected parallel input -source from external SoC pins (port@0) and/or multiple parallel input sources -from local SoC CSI-2 receivers (port@1) depending on SoC. - -- renesas,id - ID number of the VIN, VINx in the documentation. -- ports - - port@0 - sub-node describing a single endpoint connected to the VIN - from external SoC pins as described in video-interfaces.txt[1]. - Describing more than one endpoint in port@0 is invalid. Only VIN - instances that are connected to external pins should have port@0. - - Endpoint nodes of port@0 support the optional properties listed in - the Gen2 per-board settings description. - - - port@1 - sub-nodes describing one or more endpoints connected to - the VIN from local SoC CSI-2 receivers. The endpoint numbers must - use the following schema. - - - endpoint@0 - sub-node describing the endpoint connected to CSI20 - - endpoint@1 - sub-node describing the endpoint connected to CSI21 - - endpoint@2 - sub-node describing the endpoint connected to CSI40 - - endpoint@3 - sub-node describing the endpoint connected to CSI41 - - Endpoint nodes of port@1 do not support any optional endpoint property. - -Device node example for Gen2 platforms --------------------------------------- - - aliases { - vin0 = &vin0; - }; - - vin0: vin@e6ef0000 { - compatible = "renesas,vin-r8a7790", "renesas,rcar-gen2-vin"; - clocks = <&mstp8_clks R8A7790_CLK_VIN0>; - reg = <0 0xe6ef0000 0 0x1000>; - interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - -Board setup example for Gen2 platforms (vin1 composite video input) -------------------------------------------------------------------- - -&i2c2 { - status = "okay"; - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - - adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - remote = <&vin1>; - - port { - adv7180: endpoint { - bus-width = <8>; - remote-endpoint = <&vin1ep0>; - }; - }; - }; -}; - -/* composite video input */ -&vin1 { - pinctrl-0 = <&vin1_pins>; - pinctrl-names = "default"; - - status = "okay"; - - port { - vin1ep0: endpoint { - remote-endpoint = <&adv7180>; - bus-width = <8>; - }; - }; -}; - -Device node example for Gen3 platforms --------------------------------------- - - vin0: video@e6ef0000 { - compatible = "renesas,vin-r8a7795"; - reg = <0 0xe6ef0000 0 0x1000>; - interrupts = ; - clocks = <&cpg CPG_MOD 811>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 811>; - renesas,id = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <1>; - - vin0csi20: endpoint@0 { - reg = <0>; - remote-endpoint= <&csi20vin0>; - }; - vin0csi21: endpoint@1 { - reg = <1>; - remote-endpoint= <&csi21vin0>; - }; - vin0csi40: endpoint@2 { - reg = <2>; - remote-endpoint= <&csi40vin0>; - }; - }; - }; - }; - - csi20: csi2@fea80000 { - compatible = "renesas,r8a7795-csi2"; - reg = <0 0xfea80000 0 0x10000>; - interrupts = ; - clocks = <&cpg CPG_MOD 714>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 714>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - csi20_in: endpoint { - clock-lanes = <0>; - data-lanes = <1>; - remote-endpoint = <&adv7482_txb>; - }; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - - reg = <1>; - - csi20vin0: endpoint@0 { - reg = <0>; - remote-endpoint = <&vin0csi20>; - }; - }; - }; - }; - -[1] video-interfaces.txt common video media interface diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml new file mode 100644 index 000000000000..1ec947b4781f --- /dev/null +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -0,0 +1,402 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Copyright (C) 2020 Renesas Electronics Corp. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,vin.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Video Input (VIN) + +maintainers: + - Niklas Söderlund + +description: + The R-Car Video Input (VIN) device provides video input capabilities for the + Renesas R-Car family of devices. + + Each VIN instance has a single parallel input that supports RGB and YUV video, + with both external synchronization and BT.656 synchronization for the latter. + Depending on the instance the VIN input is connected to external SoC pins, or + on Gen3 and RZ/G2 platforms to a CSI-2 receiver. + +properties: + compatible: + oneOf: + - items: + - enum: + - renesas,vin-r8a7743 # RZ/G1M + - renesas,vin-r8a7744 # RZ/G1N + - renesas,vin-r8a7745 # RZ/G1E + - renesas,vin-r8a77470 # RZ/G1C + - renesas,vin-r8a7790 # R-Car H2 + - renesas,vin-r8a7791 # R-Car M2-W + - renesas,vin-r8a7792 # R-Car V2H + - renesas,vin-r8a7793 # R-Car M2-N + - renesas,vin-r8a7794 # R-Car E2 + - const: renesas,rcar-gen2-vin # Generic R-Car Gen2 or RZ/G1 + + - items: + - enum: + - renesas,vin-r8a774a1 # RZ/G2M + - renesas,vin-r8a774b1 # RZ/G2N + - renesas,vin-r8a774c0 # RZ/G2E + - renesas,vin-r8a7778 # R-Car M1 + - renesas,vin-r8a7779 # R-Car H1 + - renesas,vin-r8a7795 # R-Car H3 + - renesas,vin-r8a7796 # R-Car M3-W + - renesas,vin-r8a77965 # R-Car M3-N + - renesas,vin-r8a77970 # R-Car V3M + - renesas,vin-r8a77980 # R-Car V3H + - renesas,vin-r8a77990 # R-Car E3 + - renesas,vin-r8a77995 # R-Car D3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + + #The per-board settings for Gen2 and RZ/G1 platforms: + port: + type: object + description: + A node containing a parallel input with a single endpoint definitions as + documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + + properties: + endpoint: + type: object + + properties: + hsync-active: + description: + If both HSYNC and VSYNC polarities are not specified, embedded + synchronization is selected. + default: 1 + + vsync-active: + description: + If both HSYNC and VSYNC polarities are not specified, embedded + synchronization is selected. + default: 1 + + field-active-even: true + + bus-width: true + + data-shift: true + + data-enable-active: + description: Polarity of CLKENB signal + default: 1 + + pclk-sample: true + + data-active: true + + remote-endpoint: true + + required: + - remote-endpoint + + additionalProperties: false + + additionalProperties: false + + #The per-board settings for Gen3 and RZ/G2 platforms: + renesas,id: + description: VIN channel number + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 15 + + ports: + type: object + description: + A node containing input nodes with endpoint definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + + properties: + port@0: + type: object + description: + Input port node, single endpoint describing a parallel input source. + + properties: + reg: + const: 0 + + endpoint: + type: object + + properties: + hsync-active: + description: + If both HSYNC and VSYNC polarities are not specified, embedded + synchronization is selected. + default: 1 + + vsync-active: + description: + If both HSYNC and VSYNC polarities are not specified, embedded + synchronization is selected. + default: 1 + + field-active-even: true + + bus-width: true + + data-shift: true + + data-enable-active: + description: Polarity of CLKENB signal + default: 1 + + pclk-sample: true + + data-active: true + + remote-endpoint: true + + required: + - remote-endpoint + + additionalProperties: false + + required: + - endpoint + + additionalProperties: false + + port@1: + type: object + description: + Input port node, multiple endpoints describing all the R-Car CSI-2 + modules connected the VIN. + + properties: + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + reg: + const: 1 + + endpoint@0: + type: object + description: Endpoint connected to CSI20. + + properties: + reg: + const: 0 + + remote-endpoint: true + + required: + - reg + - remote-endpoint + + additionalProperties: false + + endpoint@1: + type: object + description: Endpoint connected to CSI21. + + properties: + reg: + const: 1 + + remote-endpoint: true + + required: + - reg + - remote-endpoint + + additionalProperties: false + + endpoint@2: + type: object + description: Endpoint connected to CSI40. + + properties: + reg: + const: 2 + + remote-endpoint: true + + required: + - reg + - remote-endpoint + + additionalProperties: false + + endpoint@3: + type: object + description: Endpoint connected to CSI41. + + properties: + reg: + const: 3 + + remote-endpoint: true + + required: + - reg + - remote-endpoint + + additionalProperties: false + + anyOf: + - required: + - endpoint@0 + - required: + - endpoint@1 + - required: + - endpoint@2 + - required: + - endpoint@3 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - power-domains + - resets + +if: + properties: + compatible: + contains: + enum: + - renesas,vin-r8a7778 + - renesas,vin-r8a7779 + - renesas,rcar-gen2-vin +then: + required: + - port +else: + required: + - renesas,id + - ports + +additionalProperties: false + +examples: + # Device node example for Gen2 platform + - | + #include + #include + #include + + vin1: vin@e6ef1000 { + compatible = "renesas,vin-r8a7790", + "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 810>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 810>; + + port { + vin1ep0: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; + }; + + # Device node example for Gen3 platform with only CSI-2 + - | + #include + #include + #include + + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7795"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 811>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 811>; + renesas,id = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin0csi20: endpoint@0 { + reg = <0>; + remote-endpoint= <&csi20vin0>; + }; + vin0csi40: endpoint@2 { + reg = <2>; + remote-endpoint= <&csi40vin0>; + }; + }; + }; + }; + + # Device node example for Gen3 platform with CSI-2 and parallel + - | + #include + #include + #include + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a77970"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = ; + clocks = <&cpg CPG_MOD 809>; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 809>; + renesas,id = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vin2_in: endpoint { + remote-endpoint = <&adv7612_out>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + + reg = <1>; + + vin2csi40: endpoint@2 { + reg = <2>; + remote-endpoint = <&csi40vin2>; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 04b5ad842fbc..de04a82e1874 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10434,7 +10434,7 @@ L: linux-renesas-soc@vger.kernel.org T: git git://linuxtv.org/media_tree.git S: Supported F: Documentation/devicetree/bindings/media/renesas,csi2.yaml -F: Documentation/devicetree/bindings/media/renesas,vin.txt +F: Documentation/devicetree/bindings/media/renesas,vin.yaml F: drivers/media/platform/rcar-vin/ MEDIA DRIVERS FOR RENESAS - VSP1