UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

[media] videodev2.h: checkpatch cleanup 

Format comments according to what checkpatch wants.

No other changes.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
Hans Verkuil 2016-09-16 07:47:08 -03:00 committed by Mauro Carvalho Chehab
parent a503ff8124
commit 8fbe91e791
1 changed files with 30 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

50
include/uapi/linux/videodev2.h
View File

@ -1303,33 +1303,43 @@ struct v4l2_bt_timings {
/* Flags */
/* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
intervals are reduced, allowing a higher resolution over the same
bandwidth. This is a read-only flag. */
/*
* CVT/GTF specific: timing uses reduced blanking (CVT) or the 'Secondary
* GTF' curve (GTF). In both cases the horizontal and/or vertical blanking
* intervals are reduced, allowing a higher resolution over the same
* bandwidth. This is a read-only flag.
*/
#define V4L2_DV_FL_REDUCED_BLANKING (1 << 0)
/* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
of six. These formats can be optionally played at 1 / 1.001 speed.
This is a read-only flag. */
/*
* CEA-861 specific: set for CEA-861 formats with a framerate of a multiple
* of six. These formats can be optionally played at 1 / 1.001 speed.
* This is a read-only flag.
*/
#define V4L2_DV_FL_CAN_REDUCE_FPS (1 << 1)
/* CEA-861 specific: only valid for video transmitters, the flag is cleared
by receivers.
If the framerate of the format is a multiple of six, then the pixelclock
used to set up the transmitter is divided by 1.001 to make it compatible
with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
such frequencies, then the flag will also be cleared. */
/*
* CEA-861 specific: only valid for video transmitters, the flag is cleared
* by receivers.
* If the framerate of the format is a multiple of six, then the pixelclock
* used to set up the transmitter is divided by 1.001 to make it compatible
* with 60 Hz based standards such as NTSC and PAL-M that use a framerate of
* 29.97 Hz. Otherwise this flag is cleared. If the transmitter can't generate
* such frequencies, then the flag will also be cleared.
*/
#define V4L2_DV_FL_REDUCED_FPS (1 << 2)
/* Specific to interlaced formats: if set, then field 1 is really one half-line
longer and field 2 is really one half-line shorter, so each field has
exactly the same number of half-lines. Whether half-lines can be detected
or used depends on the hardware. */
/*
* Specific to interlaced formats: if set, then field 1 is really one half-line
* longer and field 2 is really one half-line shorter, so each field has
* exactly the same number of half-lines. Whether half-lines can be detected
* or used depends on the hardware.
*/
#define V4L2_DV_FL_HALF_LINE (1 << 3)
/* If set, then this is a Consumer Electronics (CE) video format. Such formats
/*
* If set, then this is a Consumer Electronics (CE) video format. Such formats
* differ from other formats (commonly called IT formats) in that if RGB
* encoding is used then by default the RGB values use limited range (i.e.
* use the range 16-235) as opposed to 0-255. All formats defined in CEA-861
* except for the 640x480 format are CE formats. */
* except for the 640x480 format are CE formats.
*/
#define V4L2_DV_FL_IS_CE_VIDEO (1 << 4)
/* Some formats like SMPTE-125M have an interlaced signal with a odd
* total height. For these formats, if this flag is set, the first