[POWERPC] Uartlite: Separate the bus binding from the driver proper

Separate the bus binding code from the driver structure allocation code in
preparation for adding the of_platform_bus bindings needed by arch/powerpc

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
This commit is contained in:
Grant Likely 2007-10-02 12:15:54 +10:00 committed by Josh Boyer
parent 00775828e6
commit 8fa7b61006
1 changed files with 68 additions and 37 deletions

View File

@ -413,16 +413,75 @@ static struct uart_driver ulite_uart_driver = {
#endif
};
static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
{
struct uart_port *port;
int rc;
/* if id = -1; then scan for a free id and use that */
if (id < 0) {
for (id = 0; id < ULITE_NR_UARTS; id++)
if (ulite_ports[id].mapbase == 0)
break;
}
if (id < 0 || id >= ULITE_NR_UARTS) {
dev_err(dev, "%s%i too large\n", ULITE_NAME, id);
return -EINVAL;
}
if (ulite_ports[id].mapbase) {
dev_err(dev, "cannot assign to %s%i; it is already in use\n",
ULITE_NAME, id);
return -EBUSY;
}
port = &ulite_ports[id];
spin_lock_init(&port->lock);
port->fifosize = 16;
port->regshift = 2;
port->iotype = UPIO_MEM;
port->iobase = 1; /* mark port in use */
port->mapbase = base;
port->membase = NULL;
port->ops = &ulite_ops;
port->irq = irq;
port->flags = UPF_BOOT_AUTOCONF;
port->dev = dev;
port->type = PORT_UNKNOWN;
port->line = id;
dev_set_drvdata(dev, port);
/* Register the port */
rc = uart_add_one_port(&ulite_uart_driver, port);
if (rc) {
dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc);
port->mapbase = 0;
dev_set_drvdata(dev, NULL);
return rc;
}
return 0;
}
static int __devinit ulite_release(struct device *dev)
{
struct uart_port *port = dev_get_drvdata(dev);
int rc = 0;
if (port) {
rc = uart_remove_one_port(&ulite_uart_driver, port);
dev_set_drvdata(dev, NULL);
port->mapbase = 0;
}
return rc;
}
static int __devinit ulite_probe(struct platform_device *pdev)
{
struct resource *res, *res2;
struct uart_port *port;
if (pdev->id < 0 || pdev->id >= ULITE_NR_UARTS)
return -EINVAL;
if (ulite_ports[pdev->id].membase)
return -EBUSY;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@ -432,40 +491,12 @@ static int __devinit ulite_probe(struct platform_device *pdev)
if (!res2)
return -ENODEV;
port = &ulite_ports[pdev->id];
port->fifosize = 16;
port->regshift = 2;
port->iotype = UPIO_MEM;
port->iobase = 1; /* mark port in use */
port->mapbase = res->start;
port->membase = NULL;
port->ops = &ulite_ops;
port->irq = res2->start;
port->flags = UPF_BOOT_AUTOCONF;
port->dev = &pdev->dev;
port->type = PORT_UNKNOWN;
port->line = pdev->id;
uart_add_one_port(&ulite_uart_driver, port);
platform_set_drvdata(pdev, port);
return 0;
return ulite_assign(&pdev->dev, pdev->id, res->start, res2->start);
}
static int ulite_remove(struct platform_device *pdev)
{
struct uart_port *port = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
if (port)
uart_remove_one_port(&ulite_uart_driver, port);
/* mark port as free */
port->membase = NULL;
return 0;
return ulite_release(&pdev->dev);
}
static struct platform_driver ulite_platform_driver = {