mtd: remove redundant dependency checks in Kconfig files

Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them.

Signed-off-by: Kyle Spaans <kspaans@uwaterloo.ca>
Reviewed-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
This commit is contained in:
Kyle Spaans 2010-06-08 09:48:22 -04:00 committed by David Woodhouse
parent 6c49939869
commit 8c1a1158c9
3 changed files with 16 additions and 19 deletions

View File

@ -319,7 +319,6 @@ config SM_FTL
config MTD_OOPS
tristate "Log panic/oops to an MTD buffer"
depends on MTD
help
This enables panic and oops messages to be logged to a circular
buffer in a flash partition where it can be read back at some

View File

@ -37,7 +37,6 @@ config MTD_SM_COMMON
config MTD_NAND_MUSEUM_IDS
bool "Enable chip ids for obsolete ancient NAND devices"
depends on MTD_NAND
default n
help
Enable this option only when your board has first generation
@ -101,13 +100,13 @@ config MTD_NAND_AMS_DELTA
config MTD_NAND_OMAP2
tristate "NAND Flash device on OMAP2 and OMAP3"
depends on ARM && MTD_NAND && (ARCH_OMAP2 || ARCH_OMAP3)
depends on ARM && (ARCH_OMAP2 || ARCH_OMAP3)
help
Support for NAND flash on Texas Instruments OMAP2 and OMAP3 platforms.
config MTD_NAND_OMAP_PREFETCH
bool "GPMC prefetch support for NAND Flash device"
depends on MTD_NAND && MTD_NAND_OMAP2
depends on MTD_NAND_OMAP2
default y
help
The NAND device can be accessed for Read/Write using GPMC PREFETCH engine
@ -146,7 +145,7 @@ config MTD_NAND_AU1550
config MTD_NAND_BF5XX
tristate "Blackfin on-chip NAND Flash Controller driver"
depends on (BF54x || BF52x) && MTD_NAND
depends on BF54x || BF52x
help
This enables the Blackfin on-chip NAND flash controller
@ -236,7 +235,7 @@ config MTD_NAND_S3C2410_CLKSTOP
config MTD_NAND_BCM_UMI
tristate "NAND Flash support for BCM Reference Boards"
depends on ARCH_BCMRING && MTD_NAND
depends on ARCH_BCMRING
help
This enables the NAND flash controller on the BCM UMI block.
@ -395,7 +394,7 @@ endchoice
config MTD_NAND_PXA3xx
tristate "Support for NAND flash devices on PXA3xx"
depends on MTD_NAND && (PXA3xx || ARCH_MMP)
depends on PXA3xx || ARCH_MMP
help
This enables the driver for the NAND flash device found on
PXA3xx processors
@ -409,18 +408,18 @@ config MTD_NAND_PXA3xx_BUILTIN
config MTD_NAND_CM_X270
tristate "Support for NAND Flash on CM-X270 modules"
depends on MTD_NAND && MACH_ARMCORE
depends on MACH_ARMCORE
config MTD_NAND_PASEMI
tristate "NAND support for PA Semi PWRficient"
depends on MTD_NAND && PPC_PASEMI
depends on PPC_PASEMI
help
Enables support for NAND Flash interface on PA Semi PWRficient
based boards
config MTD_NAND_TMIO
tristate "NAND Flash device on Toshiba Mobile IO Controller"
depends on MTD_NAND && MFD_TMIO
depends on MFD_TMIO
help
Support for NAND flash connected to a Toshiba Mobile IO
Controller in some PDAs, including the Sharp SL6000x.
@ -434,7 +433,6 @@ config MTD_NAND_NANDSIM
config MTD_NAND_PLATFORM
tristate "Support for generic platform NAND driver"
depends on MTD_NAND
help
This implements a generic NAND driver for on-SOC platform
devices. You will need to provide platform-specific functions
@ -442,14 +440,14 @@ config MTD_NAND_PLATFORM
config MTD_ALAUDA
tristate "MTD driver for Olympus MAUSB-10 and Fujifilm DPC-R1"
depends on MTD_NAND && USB
depends on USB
help
These two (and possibly other) Alauda-based cardreaders for
SmartMedia and xD allow raw flash access.
config MTD_NAND_ORION
tristate "NAND Flash support for Marvell Orion SoC"
depends on PLAT_ORION && MTD_NAND
depends on PLAT_ORION
help
This enables the NAND flash controller on Orion machines.
@ -458,7 +456,7 @@ config MTD_NAND_ORION
config MTD_NAND_FSL_ELBC
tristate "NAND support for Freescale eLBC controllers"
depends on MTD_NAND && PPC_OF
depends on PPC_OF
help
Various Freescale chips, including the 8313, include a NAND Flash
Controller Module with built-in hardware ECC capabilities.
@ -467,7 +465,7 @@ config MTD_NAND_FSL_ELBC
config MTD_NAND_FSL_UPM
tristate "Support for NAND on Freescale UPM"
depends on MTD_NAND && (PPC_83xx || PPC_85xx)
depends on PPC_83xx || PPC_85xx
select FSL_LBC
help
Enables support for NAND Flash chips wired onto Freescale PowerPC
@ -495,7 +493,7 @@ config MTD_NAND_NOMADIK
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
depends on MTD_NAND && (SUPERH || ARCH_SHMOBILE)
depends on SUPERH || ARCH_SHMOBILE
help
Several Renesas SuperH CPU has FLCTL. This option enables support
for NAND Flash using FLCTL.
@ -515,7 +513,7 @@ config MTD_NAND_TXX9NDFMC
config MTD_NAND_SOCRATES
tristate "Support for NAND on Socrates board"
depends on MTD_NAND && SOCRATES
depends on SOCRATES
help
Enables support for NAND Flash chips wired onto Socrates board.

View File

@ -25,14 +25,14 @@ config MTD_ONENAND_GENERIC
config MTD_ONENAND_OMAP2
tristate "OneNAND on OMAP2/OMAP3 support"
depends on MTD_ONENAND && (ARCH_OMAP2 || ARCH_OMAP3)
depends on ARCH_OMAP2 || ARCH_OMAP3
help
Support for a OneNAND flash device connected to an OMAP2/OMAP3 CPU
via the GPMC memory controller.
config MTD_ONENAND_SAMSUNG
tristate "OneNAND on Samsung SOC controller support"
depends on MTD_ONENAND && (ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210)
depends on ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210
help
Support for a OneNAND flash device connected to an Samsung SOC
S3C64XX/S5PC1XX controller.