From 8c12ad8e916ee0477f7a0a0f00b0a87b9a21ebf7 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Thu, 14 Apr 2016 21:17:27 +0200 Subject: [PATCH] regulator: pwm: Use pwm_get_args() where appropriate The PWM framework has clarified the concept of reference PWM config (the platform dependent config retrieved from the DT or the PWM lookup table) and real PWM state. Use pwm_get_args() when the PWM user wants to retrieve this reference config and not the current state. This is part of the rework allowing the PWM framework to support hardware readout and expose real PWM state even when the PWM has just been requested (before the user calls pwm_config/enable/disable()). Signed-off-by: Boris Brezillon Acked-by: Mark Brown Signed-off-by: Thierry Reding --- drivers/regulator/pwm-regulator.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c index 4689d62f4841..ffdb895ace0a 100644 --- a/drivers/regulator/pwm-regulator.c +++ b/drivers/regulator/pwm-regulator.c @@ -59,16 +59,16 @@ static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) { struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); - unsigned int pwm_reg_period; + struct pwm_args pargs; int dutycycle; int ret; - pwm_reg_period = pwm_get_period(drvdata->pwm); + pwm_get_args(drvdata->pwm, &pargs); - dutycycle = (pwm_reg_period * + dutycycle = (pargs.period * drvdata->duty_cycle_table[selector].dutycycle) / 100; - ret = pwm_config(drvdata->pwm, dutycycle, pwm_reg_period); + ret = pwm_config(drvdata->pwm, dutycycle, pargs.period); if (ret) { dev_err(&rdev->dev, "Failed to configure PWM\n"); return ret; @@ -138,13 +138,15 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev, { struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); unsigned int ramp_delay = rdev->constraints->ramp_delay; - unsigned int period = pwm_get_period(drvdata->pwm); + struct pwm_args pargs; int duty_cycle; int ret; + pwm_get_args(drvdata->pwm, &pargs); duty_cycle = pwm_voltage_to_duty_cycle_percentage(rdev, min_uV); - ret = pwm_config(drvdata->pwm, (period / 100) * duty_cycle, period); + ret = pwm_config(drvdata->pwm, (pargs.period / 100) * duty_cycle, + pargs.period); if (ret) { dev_err(&rdev->dev, "Failed to configure PWM\n"); return ret; @@ -281,6 +283,12 @@ static int pwm_regulator_probe(struct platform_device *pdev) return PTR_ERR(drvdata->pwm); } + /* + * FIXME: pwm_apply_args() should be removed when switching to the + * atomic PWM API. + */ + pwm_apply_args(drvdata->pwm); + regulator = devm_regulator_register(&pdev->dev, &drvdata->desc, &config); if (IS_ERR(regulator)) {