Merge master.kernel.org:/home/rmk/linux-2.6-arm

arch/arm/kernel/process.c

@@ -32,6 +32,7 @@
 #include <asm/leds.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
+#include <asm/mach/time.h>
 
 extern const char *processor_modes[];
 extern void setup_mm_for_reboot(char mode);
@@ -85,8 +86,10 @@ EXPORT_SYMBOL(pm_power_off);
 void default_idle(void)
 {
 	local_irq_disable();
-	if (!need_resched() && !hlt_counter)
+	if (!need_resched() && !hlt_counter) {
+		timer_dyn_reprogram();
 		arch_idle();
+	}
 	local_irq_enable();
 }
 

arch/arm/kernel/time.c

@@ -424,15 +424,19 @@ static int timer_dyn_tick_disable(void)
 	return ret;
 }
 
+/*
+ * Reprogram the system timer for at least the calculated time interval.
+ * This function should be called from the idle thread with IRQs disabled,
+ * immediately before sleeping.
+ */
 void timer_dyn_reprogram(void)
 {
 	struct dyn_tick_timer *dyn_tick = system_timer->dyn_tick;
-	unsigned long flags;
 
-	write_seqlock_irqsave(&xtime_lock, flags);
+	write_seqlock(&xtime_lock);
 	if (dyn_tick->state & DYN_TICK_ENABLED)
 		dyn_tick->reprogram(next_timer_interrupt() - jiffies);
-	write_sequnlock_irqrestore(&xtime_lock, flags);
+	write_sequnlock(&xtime_lock);
 }
 
 static ssize_t timer_show_dyn_tick(struct sys_device *dev, char *buf)

arch/arm/mach-aaec2000/Makefile.boot

@@ -0,0 +1 @@
+	zreladdr-y := 0xf0008000

arch/arm/mm/init.c

@@ -522,6 +522,69 @@ static inline void free_area(unsigned long addr, unsigned long end, char *s)
 		printk(KERN_INFO "Freeing %s memory: %dK\n", s, size);
 }
 
+static inline void
+free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
+{
+	struct page *start_pg, *end_pg;
+	unsigned long pg, pgend;
+
+	/*
+	 * Convert start_pfn/end_pfn to a struct page pointer.
+	 */
+	start_pg = pfn_to_page(start_pfn);
+	end_pg = pfn_to_page(end_pfn);
+
+	/*
+	 * Convert to physical addresses, and
+	 * round start upwards and end downwards.
+	 */
+	pg = PAGE_ALIGN(__pa(start_pg));
+	pgend = __pa(end_pg) & PAGE_MASK;
+
+	/*
+	 * If there are free pages between these,
+	 * free the section of the memmap array.
+	 */
+	if (pg < pgend)
+		free_bootmem_node(NODE_DATA(node), pg, pgend - pg);
+}
+
+/*
+ * The mem_map array can get very big.  Free the unused area of the memory map.
+ */
+static void __init free_unused_memmap_node(int node, struct meminfo *mi)
+{
+	unsigned long bank_start, prev_bank_end = 0;
+	unsigned int i;
+
+	/*
+	 * [FIXME] This relies on each bank being in address order.  This
+	 * may not be the case, especially if the user has provided the
+	 * information on the command line.
+	 */
+	for (i = 0; i < mi->nr_banks; i++) {
+		if (mi->bank[i].size == 0 || mi->bank[i].node != node)
+			continue;
+
+		bank_start = mi->bank[i].start >> PAGE_SHIFT;
+		if (bank_start < prev_bank_end) {
+			printk(KERN_ERR "MEM: unordered memory banks.  "
+				"Not freeing memmap.\n");
+			break;
+		}
+
+		/*
+		 * If we had a previous bank, and there is a space
+		 * between the current bank and the previous, free it.
+		 */
+		if (prev_bank_end && prev_bank_end != bank_start)
+			free_memmap(node, prev_bank_end, bank_start);
+
+		prev_bank_end = (mi->bank[i].start +
+				 mi->bank[i].size) >> PAGE_SHIFT;
+	}
+}
+
 /*
  * mem_init() marks the free areas in the mem_map and tells us how much
  * memory is free.  This is done after various parts of the system have
@@ -540,16 +603,12 @@ void __init mem_init(void)
 	max_mapnr   = virt_to_page(high_memory) - mem_map;
 #endif
 
-	/*
-	 * We may have non-contiguous memory.
-	 */
-	if (meminfo.nr_banks != 1)
-		create_memmap_holes(&meminfo);
-
 	/* this will put all unused low memory onto the freelists */
 	for_each_online_node(node) {
 		pg_data_t *pgdat = NODE_DATA(node);
 
+		free_unused_memmap_node(node, &meminfo);
+
 		if (pgdat->node_spanned_pages != 0)
 			totalram_pages += free_all_bootmem_node(pgdat);
 	}

arch/arm/mm/mm-armv.c

@@ -169,7 +169,14 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 
 	memzero(new_pgd, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
 
+	/*
+	 * Copy over the kernel and IO PGD entries
+	 */
 	init_pgd = pgd_offset_k(0);
+	memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
+		       (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
+
+	clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
 
 	if (!vectors_high()) {
 		/*
@@ -198,14 +205,6 @@ pgd_t *get_pgd_slow(struct mm_struct *mm)
 		spin_unlock(&mm->page_table_lock);
 	}
 
-	/*
-	 * Copy over the kernel and IO PGD entries
-	 */
-	memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
-		       (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
-
-	clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
-
 	return new_pgd;
 
 no_pte:
@@ -698,75 +697,3 @@ void __init iotable_init(struct map_desc *io_desc, int nr)
 	for (i = 0; i < nr; i++)
 		create_mapping(io_desc + i);
 }
-
-static inline void
-free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
-{
-	struct page *start_pg, *end_pg;
-	unsigned long pg, pgend;
-
-	/*
-	 * Convert start_pfn/end_pfn to a struct page pointer.
-	 */
-	start_pg = pfn_to_page(start_pfn);
-	end_pg = pfn_to_page(end_pfn);
-
-	/*
-	 * Convert to physical addresses, and
-	 * round start upwards and end downwards.
-	 */
-	pg = PAGE_ALIGN(__pa(start_pg));
-	pgend = __pa(end_pg) & PAGE_MASK;
-
-	/*
-	 * If there are free pages between these,
-	 * free the section of the memmap array.
-	 */
-	if (pg < pgend)
-		free_bootmem_node(NODE_DATA(node), pg, pgend - pg);
-}
-
-static inline void free_unused_memmap_node(int node, struct meminfo *mi)
-{
-	unsigned long bank_start, prev_bank_end = 0;
-	unsigned int i;
-
-	/*
-	 * [FIXME] This relies on each bank being in address order.  This
-	 * may not be the case, especially if the user has provided the
-	 * information on the command line.
-	 */
-	for (i = 0; i < mi->nr_banks; i++) {
-		if (mi->bank[i].size == 0 || mi->bank[i].node != node)
-			continue;
-
-		bank_start = mi->bank[i].start >> PAGE_SHIFT;
-		if (bank_start < prev_bank_end) {
-			printk(KERN_ERR "MEM: unordered memory banks.  "
-				"Not freeing memmap.\n");
-			break;
-		}
-
-		/*
-		 * If we had a previous bank, and there is a space
-		 * between the current bank and the previous, free it.
-		 */
-		if (prev_bank_end && prev_bank_end != bank_start)
-			free_memmap(node, prev_bank_end, bank_start);
-
-		prev_bank_end = PAGE_ALIGN(mi->bank[i].start +
-					   mi->bank[i].size) >> PAGE_SHIFT;
-	}
-}
-
-/*
- * The mem_map array can get very big.  Free
- * the unused area of the memory map.
- */
-void __init create_memmap_holes(struct meminfo *mi)
-{
-	int node;
-
-	for_each_online_node(node)
-		free_unused_memmap_node(node, mi);
-}

arch/arm/tools/mach-types

@@ -6,7 +6,7 @@
 # To add an entry into this database, please see Documentation/arm/README,
 # or contact rmk@arm.linux.org.uk
 #
-# Last update: Thu Mar 24 14:34:50 2005
+# Last update: Thu Jun 23 20:19:33 2005
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -243,7 +243,7 @@ yoho			ARCH_YOHO		YOHO			231
 jasper			ARCH_JASPER		JASPER			232
 dsc25			ARCH_DSC25		DSC25			233
 omap_innovator		MACH_OMAP_INNOVATOR	OMAP_INNOVATOR		234
-ramses			ARCH_RAMSES		RAMSES			235
+mnci			ARCH_RAMSES		RAMSES			235
 s28x			ARCH_S28X		S28X			236
 mport3			ARCH_MPORT3		MPORT3			237
 pxa_eagle250		ARCH_PXA_EAGLE250	PXA_EAGLE250		238
@@ -323,7 +323,7 @@ nimbra29x		ARCH_NIMBRA29X		NIMBRA29X		311
 nimbra210		ARCH_NIMBRA210		NIMBRA210		312
 hhp_d95xx		ARCH_HHP_D95XX		HHP_D95XX		313
 labarm			ARCH_LABARM		LABARM			314
-m825xx			ARCH_M825XX		M825XX			315
+comcerto		ARCH_M825XX		M825XX			315
 m7100			SA1100_M7100		M7100			316
 nipc2			ARCH_NIPC2		NIPC2			317
 fu7202			ARCH_FU7202		FU7202			318
@@ -724,3 +724,66 @@ lpc22xx			MACH_LPC22XX		LPC22XX			715
 omap_comet3		MACH_COMET3		COMET3			716
 omap_comet4		MACH_COMET4		COMET4			717
 csb625			MACH_CSB625		CSB625			718
+fortunet2		MACH_FORTUNET2		FORTUNET2		719
+s5h2200			MACH_S5H2200		S5H2200			720
+optorm920		MACH_OPTORM920		OPTORM920		721
+adsbitsyxb		MACH_ADSBITSYXB		ADSBITSYXB		722
+adssphere		MACH_ADSSPHERE		ADSSPHERE		723
+adsportal		MACH_ADSPORTAL		ADSPORTAL		724
+ln2410sbc		MACH_LN2410SBC		LN2410SBC		725
+cb3rufc			MACH_CB3RUFC		CB3RUFC			726
+mp2usb			MACH_MP2USB		MP2USB			727
+ntnp425c		MACH_NTNP425C		NTNP425C		728
+colibri			MACH_COLIBRI		COLIBRI			729
+pcm7220			MACH_PCM7220		PCM7220			730
+gateway7001		MACH_GATEWAY7001	GATEWAY7001		731
+pcm027			MACH_PCM027		PCM027			732
+cmpxa			MACH_CMPXA		CMPXA			733
+anubis			MACH_ANUBIS		ANUBIS			734
+ite8152			MACH_ITE8152		ITE8152			735
+lpc3xxx			MACH_LPC3XXX		LPC3XXX			736
+puppeteer		MACH_PUPPETEER		PUPPETEER		737
+vt001			MACH_MACH_VADATECH	MACH_VADATECH		738
+e570			MACH_E570		E570			739
+x50			MACH_X50		X50			740
+recon			MACH_RECON		RECON			741
+xboardgp8		MACH_XBOARDGP8		XBOARDGP8		742
+fpic2			MACH_FPIC2		FPIC2			743
+akita			MACH_AKITA		AKITA			744
+a81			MACH_A81		A81			745
+svm_sc25x		MACH_SVM_SC25X		SVM_SC25X		746
+vt020			MACH_VADATECH020	VADATECH020		747
+tli			MACH_TLI		TLI			748
+edb9315lc		MACH_EDB9315LC		EDB9315LC		749
+passec			MACH_PASSEC		PASSEC			750
+ds_tiger		MACH_DS_TIGER		DS_TIGER		751
+e310			MACH_E310		E310			752
+e330			MACH_E330		E330			753
+rt3000			MACH_RT3000		RT3000			754
+nokia770		MACH_NOKIA770		NOKIA770		755
+pnx0106			MACH_PNX0106		PNX0106			756
+hx21xx			MACH_HX21XX		HX21XX			757
+faraday			MACH_FARADAY		FARADAY			758
+sbc9312			MACH_SBC9312		SBC9312			759
+batman			MACH_BATMAN		BATMAN			760
+jpd201			MACH_JPD201		JPD201			761
+mipsa			MACH_MIPSA		MIPSA			762
+kacom			MACH_KACOM		KACOM			763
+swarcocpu		MACH_SWARCOCPU		SWARCOCPU		764
+swarcodsl		MACH_SWARCODSL		SWARCODSL		765
+blueangel		MACH_BLUEANGEL		BLUEANGEL		766
+hairygrama		MACH_HAIRYGRAMA		HAIRYGRAMA		767
+banff			MACH_BANFF		BANFF			768
+carmeva			MACH_CARMEVA		CARMEVA			769
+sam255			MACH_SAM255		SAM255			770
+ppm10			MACH_PPM10		PPM10			771
+edb9315a		MACH_EDB9315A		EDB9315A		772
+sunset			MACH_SUNSET		SUNSET			773
+stargate2		MACH_STARGATE2		STARGATE2		774
+intelmote2		MACH_INTELMOTE2		INTELMOTE2		775
+trizeps4		MACH_TRIZEPS4		TRIZEPS4		776
+mainstone2		MACH_MAINSTONE2		MAINSTONE2		777
+ez_ixp42x		MACH_EZ_IXP42X		EZ_IXP42X		778
+tapwave_zodiac		MACH_TAPWAVE_ZODIAC	TAPWAVE_ZODIAC		779
+universalmeter		MACH_UNIVERSALMETER	UNIVERSALMETER		780
+hicoarm9		MACH_HICOARM9		HICOARM9		781

include/asm-arm/arch-ixp4xx/debug-macro.S

@@ -14,8 +14,8 @@
                 mrc     p15, 0, \rx, c1, c0
                 tst     \rx, #1                 @ MMU enabled?
                 moveq   \rx, #0xc8000000
-		orrne	\rx, \rx, #0x00b00000
                 movne   \rx, #0xff000000
+		orrne	\rx, \rx, #0x00b00000
                 add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
 						@ byte writes used - Big Endian.
                 .endm

include/asm-arm/ide.h

@@ -5,7 +5,7 @@
  */
 
 /*
- *  This file contains the i386 architecture specific IDE code.
+ *  This file contains the ARM architecture specific IDE code.
  */
 
 #ifndef __ASMARM_IDE_H

include/asm-arm/io.h

@@ -82,7 +82,7 @@ extern void __readwrite_bug(const char *fn);
  * only.  Their primary purpose is to access PCI and ISA peripherals.
  *
  * Note that for a big endian machine, this implies that the following
- * big endian mode connectivity is in place, as described by numerious
+ * big endian mode connectivity is in place, as described by numerous
  * ARM documents:
  *
  *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31

include/asm-arm/mach/time.h

@@ -60,6 +60,8 @@ struct dyn_tick_timer {
 };
 
 void timer_dyn_reprogram(void);
+#else
+#define timer_dyn_reprogram()	do { } while (0)
 #endif
 
 extern struct sys_timer *system_timer;