net: stmmac: return error if no DMA configuration is found

All drivers except pci glue layer calls stmmac_probe_config_dt.
stmmac_probe_config_dt does a kzalloc dma_cfg.

pci glue layer does kzalloc dma_cfg explicitly, so all current
drivers does a kzalloc dma_cfg.

Return an error if no DMA configuration is found, that way
we can assume that the DMA configuration always exists.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Niklas Cassel 2016-12-07 15:20:03 +01:00 committed by David S. Miller
parent 3f0dd6b79c
commit 89ab75bf72
1 changed files with 9 additions and 9 deletions

View File

@ -1578,16 +1578,12 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv)
*/
static int stmmac_init_dma_engine(struct stmmac_priv *priv)
{
int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, aal = 0;
int mixed_burst = 0;
int atds = 0;
int ret = 0;
if (priv->plat->dma_cfg) {
pbl = priv->plat->dma_cfg->pbl;
fixed_burst = priv->plat->dma_cfg->fixed_burst;
mixed_burst = priv->plat->dma_cfg->mixed_burst;
aal = priv->plat->dma_cfg->aal;
if (!priv->plat->dma_cfg) {
dev_err(priv->device, "DMA configuration not found\n");
return -EINVAL;
}
if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE))
@ -1599,8 +1595,12 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
return ret;
}
priv->hw->dma->init(priv->ioaddr, pbl, fixed_burst, mixed_burst,
aal, priv->dma_tx_phy, priv->dma_rx_phy, atds);
priv->hw->dma->init(priv->ioaddr,
priv->plat->dma_cfg->pbl,
priv->plat->dma_cfg->fixed_burst,
priv->plat->dma_cfg->mixed_burst,
priv->plat->dma_cfg->aal,
priv->dma_tx_phy, priv->dma_rx_phy, atds);
if (priv->synopsys_id >= DWMAC_CORE_4_00) {
priv->rx_tail_addr = priv->dma_rx_phy +