mfd: Correct ro and cd implemantion on DM355
This patch corrects the support for MMCSD card detection and read only feature for SoC DM355. EVMDM355_ECP_VA4.pdf, from Spectrum digital, suggests that Bit 2 and 4 should be checked for card detection. However on the EVM, bits 1 and 3 gives this status, for MMC/SD instance 0 and 1 respectively. The pdf also suggests that Bit 1 and 3 should be checked for write protection. However on the EVM bits 2 and 4 gives this status. This document can be downloaded from http://c6000.spectrumdigital.com/evmdm355/reve/files/EVMDM355_ECP_VA4.pdf Signed-off-by: Vipin Bhandari <vipin.bhandari@ti.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
parent
8d360d8c03
commit
89a99e76f6
|
@ -107,8 +107,16 @@ static const u8 msp_gpios[] = {
|
|||
MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1),
|
||||
MSP_GPIO(4, SWITCH1),
|
||||
/* switches on MMC/SD sockets */
|
||||
MSP_GPIO(1, SDMMC), MSP_GPIO(2, SDMMC), /* mmc0 WP, nCD */
|
||||
MSP_GPIO(3, SDMMC), MSP_GPIO(4, SDMMC), /* mmc1 WP, nCD */
|
||||
/*
|
||||
* Note: EVMDM355_ECP_VA4.pdf suggests that Bit 2 and 4 should be
|
||||
* checked for card detection. However on the EVM bit 1 and 3 gives
|
||||
* this status, for 0 and 1 instance respectively. The pdf also
|
||||
* suggests that Bit 1 and 3 should be checked for write protection.
|
||||
* However on the EVM bit 2 and 4 gives this status,for 0 and 1
|
||||
* instance respectively.
|
||||
*/
|
||||
MSP_GPIO(2, SDMMC), MSP_GPIO(1, SDMMC), /* mmc0 WP, nCD */
|
||||
MSP_GPIO(4, SDMMC), MSP_GPIO(3, SDMMC), /* mmc1 WP, nCD */
|
||||
};
|
||||
|
||||
#define MSP_GPIO_REG(offset) (msp_gpios[(offset)] >> 3)
|
||||
|
|
Loading…
Reference in New Issue