reset: img: Add pistachio reset controller binding document
Add binding document for the Pistachio SoC reset controller Signed-off-by: Damien Horsley <Damien.Horsley@imgtec.com> Signed-off-by: James Hartley <james.hartley@imgtec.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This commit is contained in:
parent
c41ef91f65
commit
8859b90162
|
@ -0,0 +1,55 @@
|
|||
Pistachio Reset Controller
|
||||
=============================================================================
|
||||
|
||||
This binding describes a reset controller device that is used to enable and
|
||||
disable individual IP blocks within the Pistachio SoC using "soft reset"
|
||||
control bits found in the Pistachio SoC top level registers.
|
||||
|
||||
The actual action taken when soft reset is asserted is hardware dependent.
|
||||
However, when asserted it may not be possible to access the hardware's
|
||||
registers, and following an assert/deassert sequence the hardware's previous
|
||||
state may no longer be valid.
|
||||
|
||||
Please refer to Documentation/devicetree/bindings/reset/reset.txt
|
||||
for common reset controller binding usage.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: Contains "img,pistachio-reset"
|
||||
|
||||
- #reset-cells: Contains 1
|
||||
|
||||
Example:
|
||||
|
||||
cr_periph: clk@18148000 {
|
||||
compatible = "img,pistachio-cr-periph", "syscon", "simple-mfd";
|
||||
reg = <0x18148000 0x1000>;
|
||||
clocks = <&clk_periph PERIPH_CLK_SYS>;
|
||||
clock-names = "sys";
|
||||
#clock-cells = <1>;
|
||||
|
||||
pistachio_reset: reset-controller {
|
||||
compatible = "img,pistachio-reset";
|
||||
#reset-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
Specifying reset control of devices
|
||||
=======================================
|
||||
|
||||
Device nodes should specify the reset channel required in their "resets"
|
||||
property, containing a phandle to the pistachio reset device node and an
|
||||
index specifying which reset to use, as described in
|
||||
Documentation/devicetree/bindings/reset/reset.txt.
|
||||
|
||||
Example:
|
||||
|
||||
spdif_out: spdif-out@18100d00 {
|
||||
...
|
||||
resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>;
|
||||
reset-names = "rst";
|
||||
...
|
||||
};
|
||||
|
||||
Macro definitions for the supported resets can be found in:
|
||||
include/dt-bindings/reset/pistachio-resets.h
|
Loading…
Reference in New Issue