UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

Renesas ARM DT updates for v5.16 

- I2C EEPROM support on the RZA2MEVB development board,
   - DMA, USB2.0, and audio support for the RZ/G2L SoC,
   - USB2.0, I2C, audio, ADC, and CANFD support for the RZ/G2L SMARC EVK
     development board,
   - Support for more R-Car Gen3e SoCs (H3e, M3e, M3Ne(-2G), D3e, E3e,
     H3Ne),
   - PWM support for the R-Car M3-W+ and V3U SoCs,
   - IPMMU support for SDHI on the R-Car V3U SoC,
   - Switches support for the Falcon development board,
   - Improve Ethernet PHY descriptions to fix reset handling after kexec,
   - Miscellaneous fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYVbUMwAKCRCKwlD9ZEnx
 cC3lAQCXJwi2QXqvWKKLPmnkT7GwD5OaF4F1ykBmfExD3fHpcwD5ATmkHwvIGkRG
 JOH1BDNSmcq36xwaAsRXmCAWm0dG6wE=
 =HxRU
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFcXegACgkQmmx57+YA
 GNlydA/9Ff5XmmzVi3syHkc/whtmy8nWD2RpweGRbLXQK7N95nbYxsYkIp42xNMI
 SaErs6QvpTsM9Les2khRjnStT/UZIXJyzejiGzFCTfNyqO6w7SObzS1h2fcxwemh
 EYpbIDCqsvI+Hh1+AT4vOare3uYnsRijTqCyVEQ/0zKdANmRAx5f4P6J9q69nfX7
 nSwg/qIKOeB1X1EOUd6P2l/UySHhCOCmGxibxJbjc9IAlo+kitByw8pjpdwJOxvJ
 R3sxRgNwSGRx2JwtiB613C6sQRu6k9960GcEJvXVlU72IKZSiwOdv/aYHWkeL6Ul
 zarqSqtZNjxmqefcyfKpqw1ENn6KGcqYz7X5DVNJbV1yzs/eAeWb3nBr3bDyfwro
 1JRAr07tC8dS9bZCjO7uXNs4xbC4cztJtgzHYBKfS30G/Hbc4eQ9+WyPW8pYf4/8
 qxigbATpKhQojpZuvH84EhWzVl6gSaU6m6vaz0UJqsIlu9lOf2vE9gFkKahAobX+
 0fcylpTZ5eZY8SDe1l033vH+/YepYqOAifGPChNe5katwmEMlT9wubbbXKoO5dYd
 mdglOlyT3s8PyxePDMIBnax1TsZYHC43FqVTByMJq6tDNfkblcLbHILqpudGy5Hx
 Mj87uzNifsSPpRFghXy7FSac6D9/9XXFroIIB/n+/j/JCEv0V10=
 =9/VI
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm-dt-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.16

  - I2C EEPROM support on the RZA2MEVB development board,
  - DMA, USB2.0, and audio support for the RZ/G2L SoC,
  - USB2.0, I2C, audio, ADC, and CANFD support for the RZ/G2L SMARC EVK
    development board,
  - Support for more R-Car Gen3e SoCs (H3e, M3e, M3Ne(-2G), D3e, E3e,
    H3Ne),
  - PWM support for the R-Car M3-W+ and V3U SoCs,
  - IPMMU support for SDHI on the R-Car V3U SoC,
  - Switches support for the Falcon development board,
  - Improve Ethernet PHY descriptions to fix reset handling after kexec,
  - Miscellaneous fixes and improvements.

* tag 'renesas-arm-dt-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (45 commits)
  arm64: dts: renesas: rcar-gen3: Add missing Ethernet PHY resets
  ARM: dts: rzg1: Add missing Ethernet PHY resets
  ARM: dts: r-mobile: Add missing Ethernet PHY resets
  arm64: dts: renesas: Add compatible properties to RTL8211E Ethernet PHYs
  arm64: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs
  arm64: dts: renesas: Add compatible properties to AR8031 Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to uPD6061x Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to RTL8201FL Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to LAN8710A Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to KSZ9031 Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to KSZ8081 Ethernet PHYs
  ARM: dts: renesas: Add compatible properties to KSZ8041 Ethernet PHYs
  arm64: dts: renesas: beacon: Fix Ethernet PHY mode
  ARM: dts: renesas: Fix SMSC Ethernet compatible values
  arm64: dts: renesas: rzg2l-smarc: Enable CANFD
  arm64: dts: renesas: rzg2l-smarc-som: Enable ADC on SMARC platform
  arm64: dts: renesas: rzg2l-smarc-som: Move extal and memory nodes to SOM DTSI
  arm64: dts: renesas: r8a779a0: falcon-cpu: Add SW47-SW49 support
  arm64: dts: renesas: rzg2l-smarc: Add Mic routing
  arm64: dts: renesas: rzg2l-smarc: Enable audio
  ...

Link: https://lore.kernel.org/r/cover.1633081147.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann 2021-10-05 16:15:04 +02:00
parent f86f3e40a7 732e8ee035
commit 8839e60e15
54 changed files with 2375 additions and 1469 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/boot/dts/emev2-kzm9d.dts
View File

@ -80,7 +80,7 @@
};
ethernet@20000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
compatible = "smsc,lan9221", "smsc,lan9115";
reg = <0x20000000 0x10000>;
phy-mode = "mii";
interrupt-parent = <&gpio0>;

2
arch/arm/boot/dts/iwg20d-q7-common.dtsi
View File

@ -158,6 +158,8 @@
status = "okay";
phy3: ethernet-phy@3 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
reg = <3>;
micrel,led-mode = <1>;
};

2
arch/arm/boot/dts/r7s72100-genmai.dts
View File

@ -108,6 +108,8 @@
renesas,no-ether-link;
phy-handle = <&phy0>;
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-idb824.2814",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};

2
arch/arm/boot/dts/r7s72100-gr-peach.dts
View File

@ -129,6 +129,8 @@
phy-handle = <&phy0>;
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0007.c0f0",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;

2
arch/arm/boot/dts/r7s72100-rskrza1.dts
View File

@ -192,6 +192,8 @@
renesas,no-ether-link;
phy-handle = <&phy0>;
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-idb824.2814",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};

21
arch/arm/boot/dts/r7s9210-rza2mevb.dts
View File

@ -100,6 +100,8 @@
renesas,no-ether-link;
phy-handle = <&phy1>;
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id001c.c816",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
@ -109,6 +111,20 @@
clock-frequency = <24000000>; /* 24MHz */
};
&i2c3 {
status = "okay";
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
eeprom@50 {
compatible = "renesas,r1ex24128", "atmel,24c128";
reg = <0x50>;
pagesize = <64>;
};
};
/* High resolution System tick timers */
&ostm0 {
status = "okay";
@ -147,6 +163,11 @@
<RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */
};
i2c3_pins: i2c3 {
pinmux = <RZA2_PINMUX(PORTD, 6, 1)>, /* RIIC3SCL */
<RZA2_PINMUX(PORTD, 7, 1)>; /* RIIC3SDA */
};
keyboard_pins: keyboard {
pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>; /* IRQ0 */
};

1
arch/arm/boot/dts/r8a73a4-ape6evm.dts
View File

@ -199,6 +199,7 @@
reg-io-width = <4>;
smsc,irq-active-high;
smsc,irq-push-pull;
reset-gpios = <&pfc 270 GPIO_ACTIVE_LOW>;
vdd33a-supply = <&ape6evm_fixed_3v3>;
vddvario-supply = <&ape6evm_fixed_1v8>;
};

3
arch/arm/boot/dts/r8a7740-armadillo800eva.dts
View File

@ -170,7 +170,10 @@
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0007.c0f1",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
reset-gpios = <&pfc 18 GPIO_ACTIVE_LOW>;
};
};

2
arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
View File

@ -66,6 +66,8 @@
status = "okay";
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0022.1560",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
micrel,led-mode = <1>;
};

2
arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
View File

@ -175,6 +175,8 @@
status = "okay";
phy3: ethernet-phy@3 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
reg = <3>;
micrel,led-mode = <1>;
};

4
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts
View File

@ -7,6 +7,7 @@
/dts-v1/;
#include "r8a7743.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "SK-RZG1M";
@ -69,9 +70,12 @@
status = "okay";
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0022.1537",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
};
};

2
arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts
View File

@ -123,6 +123,8 @@
* On some older versions of the platform (before R4.0) the phy address
* may be 1 or 3. The address is fixed to 3 for R4.0 onwards.
*/
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
reg = <3>;
micrel,led-mode = <1>;
};

4
arch/arm/boot/dts/r8a7745-sk-rzg1e.dts
View File

@ -7,6 +7,7 @@
/dts-v1/;
#include "r8a7745.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "SK-RZG1E";
@ -64,9 +65,12 @@
status = "okay";
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0022.1537",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
micrel,led-mode = <1>;
reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
};
};

2
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
View File

@ -79,6 +79,8 @@
status = "okay";
phy3: ethernet-phy@3 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
reg = <3>;
interrupt-parent = <&gpio5>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;

2
arch/arm/boot/dts/r8a7778-bockw.dts
View File

@ -63,7 +63,7 @@
&bsc {
ethernet@18300000 {
compatible = "smsc,lan9220", "smsc,lan9115";
compatible = "smsc,lan89218", "smsc,lan9115";
reg = <0x18300000 0x1000>;
phy-mode = "mii";

2
arch/arm/boot/dts/r8a7779-marzen.dts
View File

@ -52,7 +52,7 @@
};
ethernet@18000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
compatible = "smsc,lan89218", "smsc,lan9115";
reg = <0x18000000 0x100>;
pinctrl-0 = <&ethernet_pins>;
pinctrl-names = "default";

2
arch/arm/boot/dts/r8a7790-lager.dts
View File

@ -678,6 +678,8 @@
status = "okay";
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0022.1537",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

2
arch/arm/boot/dts/r8a7790-stout.dts
View File

@ -199,6 +199,8 @@
status = "okay";
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0022.1537",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;

2
arch/arm/boot/dts/r8a7791-koelsch.dts
View File

@ -637,6 +637,8 @@
status = "okay";
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0022.1537",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

2
arch/arm/boot/dts/r8a7791-porter.dts
View File

@ -302,6 +302,8 @@
status = "okay";
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0022.1537",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

2
arch/arm/boot/dts/r8a7793-gose.dts
View File

@ -595,6 +595,8 @@
status = "okay";
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0022.1537",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

2
arch/arm/boot/dts/r8a7794-alt.dts
View File

@ -383,6 +383,8 @@
status = "okay";
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0022.1537",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;

2
arch/arm/boot/dts/r8a7794-silk.dts
View File

@ -397,6 +397,8 @@
status = "okay";
phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id0022.1537",
"ethernet-phy-ieee802.3-c22";
reg = <1>;
interrupt-parent = <&irqc0>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;

2
arch/arm/boot/dts/sh73a0-kzm9g.dts
View File

@ -169,7 +169,7 @@
&bsc {
ethernet@10000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
compatible = "smsc,lan9221", "smsc,lan9115";
reg = <0x10000000 0x100>;
phy-mode = "mii";
interrupt-parent = <&irqpin0>;

2
arch/arm64/boot/dts/renesas/Makefile
View File

@ -71,4 +71,6 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb.dtb
dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb
dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb

3
arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
View File

@ -50,6 +50,7 @@
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-mode = "rgmii-rxid";
phy-handle = <&phy0>;
rx-internal-delay-ps = <1800>;
tx-internal-delay-ps = <2000>;
@ -58,6 +59,8 @@
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id004d.d074",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;

2
arch/arm64/boot/dts/renesas/cat875.dtsi
View File

@ -21,6 +21,8 @@
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id001c.c915",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;

686
arch/arm64/boot/dts/renesas/draak.dtsi Normal file
View File

@ -0,0 +1,686 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the Draak board
*
* Copyright (C) 2016-2018 Renesas Electronics Corp.
* Copyright (C) 2017 Glider bvba
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Renesas Draak board";
compatible = "renesas,draak";
aliases {
serial0 = &scif2;
ethernet0 = &avb;
};
audio_clkout: audio-clkout {
/*
* This is same as <&rcar_sound 0>
* but needed to avoid cs2000/rcar_sound probe dead-lock
*/
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <12288000>;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 50000>;
brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
default-brightness-level = <10>;
power-supply = <&reg_12p0v>;
enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
composite-in {
compatible = "composite-video-connector";
port {
composite_con_in: endpoint {
remote-endpoint = <&adv7180_in>;
};
};
};
hdmi-in {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&adv7612_in>;
};
};
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_out: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&keys_pins>;
pinctrl-names = "default";
key-1 {
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
label = "SW56-1";
wakeup-source;
debounce-interval = <20>;
};
key-2 {
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_2>;
label = "SW56-2";
wakeup-source;
debounce-interval = <20>;
};
key-3 {
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>;
label = "SW56-3";
wakeup-source;
debounce-interval = <20>;
};
key-4 {
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_4>;
label = "SW56-4";
wakeup-source;
debounce-interval = <20>;
};
};
lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <&reg_3p3v>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
thc63lvd1024_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
port@2 {
reg = <2>;
thc63lvd1024_out: endpoint {
remote-endpoint = <&adv7511_in>;
};
};
};
};
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x18000000>;
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_12p0v: regulator-12p0v {
compatible = "regulator-fixed";
regulator-name = "D12.0V";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-boot-on;
regulator-always-on;
};
sound_card: sound {
compatible = "audio-graph-card";
dais = <&rsnd_port0 /* ak4613 */
/* HDMI is not yet supported */
>;
};
vga {
compatible = "vga-connector";
port {
vga_in: endpoint {
remote-endpoint = <&adv7123_out>;
};
};
};
vga-encoder {
compatible = "adi,adv7123";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7123_in: endpoint {
remote-endpoint = <&du_out_rgb>;
};
};
port@1 {
reg = <1>;
adv7123_out: endpoint {
remote-endpoint = <&vga_in>;
};
};
};
};
x12_clk: x12 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
x19_clk: x19 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
};
&audio_clk_b {
/*
* X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB,
* and R-Car Sound uses AUDIO_CLKB.
* Note is that schematic indicates VI4_FIELD conection only
* not AUDIO_CLKB at SoC page.
* And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60.
* SW60 should be 1-2.
*/
clock-frequency = <22579200>;
};
&avb {
pinctrl-0 = <&avb0_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio5>;
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
/*
* TX clock internal delay mode is required for reliable
* 1Gbps communication using the KSZ9031RNX phy present on
* the Draak board, however, TX clock internal delay mode
* isn't supported on R-Car D3(e). Thus, limit speed to
* 100Mbps for reliable communication.
*/
max-speed = <100>;
};
};
&can0 {
pinctrl-0 = <&can0_pins>;
pinctrl-names = "default";
status = "okay";
};
&can1 {
pinctrl-0 = <&can1_pins>;
pinctrl-names = "default";
status = "okay";
};
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
status = "okay";
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&x12_clk>;
clock-names = "du.0", "du.1", "dclkin.0";
ports {
port@0 {
endpoint {
remote-endpoint = <&adv7123_in>;
};
};
};
};
&ehci0 {
dr_mode = "host";
status = "okay";
};
&extal_clk {
clock-frequency = <48000000>;
};
&hsusb {
dr_mode = "host";
status = "okay";
};
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
status = "okay";
ak4613: codec@10 {
compatible = "asahi-kasei,ak4613";
#sound-dai-cells = <0>;
reg = <0x10>;
clocks = <&rcar_sound 0>; /* audio_clkout */
asahi-kasei,in1-single-end;
asahi-kasei,in2-single-end;
asahi-kasei,out1-single-end;
asahi-kasei,out2-single-end;
asahi-kasei,out3-single-end;
asahi-kasei,out4-single-end;
asahi-kasei,out5-single-end;
asahi-kasei,out6-single-end;
port {
ak4613_endpoint: endpoint {
remote-endpoint = <&rsnd_for_ak4613>;
};
};
};
composite-in@20 {
compatible = "adi,adv7180cp";
reg = <0x20>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7180_in: endpoint {
remote-endpoint = <&composite_con_in>;
};
};
port@3 {
reg = <3>;
/*
* The VIN4 video input path is shared between
* CVBS and HDMI inputs through SW[49-53]
* switches.
*
* CVBS is the default selection, link it to
* VIN4 here.
*/
adv7180_out: endpoint {
remote-endpoint = <&vin4_in>;
};
};
};
};
hdmi-encoder@39 {
compatible = "adi,adv7511w";
reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
reg-names = "main", "edid", "cec", "packet";
interrupt-parent = <&gpio1>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7511_in: endpoint {
remote-endpoint = <&thc63lvd1024_out>;
};
};
port@1 {
reg = <1>;
adv7511_out: endpoint {
remote-endpoint = <&hdmi_con_out>;
};
};
};
};
hdmi-decoder@4c {
compatible = "adi,adv7612";
reg = <0x4c>;
default-input = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7612_in: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
port@2 {
reg = <2>;
/*
* The VIN4 video input path is shared between
* CVBS and HDMI inputs through SW[49-53]
* switches.
*
* CVBS is the default selection, leave HDMI
* not connected here.
*/
adv7612_out: endpoint {
pclk-sample = <0>;
hsync-active = <0>;
vsync-active = <0>;
};
};
};
};
cs2000: clk-multiplier@4f {
#clock-cells = <0>;
compatible = "cirrus,cs2000-cp";
reg = <0x4f>;
clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */
clock-names = "clk_in", "ref_clk";
assigned-clocks = <&cs2000>;
assigned-clock-rates = <24576000>; /* 1/1 divide */
};
eeprom@50 {
compatible = "rohm,br24t01", "atmel,24c01";
reg = <0x50>;
pagesize = <8>;
};
};
&i2c1 {
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
status = "okay";
};
&lvds0 {
status = "okay";
clocks = <&cpg CPG_MOD 727>,
<&x12_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
ports {
port@1 {
lvds0_out: endpoint {
remote-endpoint = <&thc63lvd1024_in>;
};
};
};
};
&lvds1 {
/*
* Even though the LVDS1 output is not connected, the encoder must be
* enabled to supply a pixel clock to the DU for the DPAD output when
* LVDS0 is in use.
*/
status = "okay";
clocks = <&cpg CPG_MOD 727>,
<&x12_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
};
&ohci0 {
dr_mode = "host";
status = "okay";
};
&pfc {
avb0_pins: avb {
groups = "avb0_link", "avb0_mdio", "avb0_mii";
function = "avb0";
};
can0_pins: can0 {
groups = "can0_data_a";
function = "can0";
};
can1_pins: can1 {
groups = "can1_data_a";
function = "can1";
};
du_pins: du {
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
function = "du";
};
i2c0_pins: i2c0 {
groups = "i2c0";
function = "i2c0";
};
i2c1_pins: i2c1 {
groups = "i2c1";
function = "i2c1";
};
keys_pins: keys {
pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15";
bias-pull-up;
};
pwm0_pins: pwm0 {
groups = "pwm0_c";
function = "pwm0";
};
pwm1_pins: pwm1 {
groups = "pwm1_c";
function = "pwm1";
};
scif2_pins: scif2 {
groups = "scif2_data";
function = "scif2";
};
sdhi2_pins: sd2 {
groups = "mmc_data8", "mmc_ctrl";
function = "mmc";
power-source = <1800>;
};
sdhi2_pins_uhs: sd2_uhs {
groups = "mmc_data8", "mmc_ctrl";
function = "mmc";
power-source = <1800>;
};
sound_pins: sound {
groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a";
function = "ssi";
};
sound_clk_pins: sound-clk {
groups = "audio_clk_a", "audio_clk_b",
"audio_clkout", "audio_clkout1";
function = "audio_clk";
};
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
};
vin4_pins_cvbs: vin4 {
groups = "vin4_data8", "vin4_sync", "vin4_clk";
function = "vin4";
};
};
&pwm0 {
pinctrl-0 = <&pwm0_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm1 {
pinctrl-0 = <&pwm1_pins>;
pinctrl-names = "default";
status = "okay";
};
&rcar_sound {
pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
#sound-dai-cells = <0>;
/* audio_clkout0/1 */
#clock-cells = <1>;
clock-frequency = <12288000 11289600>;
status = "okay";
clocks = <&cpg CPG_MOD 1005>,
<&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
<&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&cs2000>, <&audio_clk_b>,
<&cpg CPG_CORE R8A77995_CLK_ZA2>;
ports {
rsnd_port0: port {
rsnd_for_ak4613: endpoint {
remote-endpoint = <&ak4613_endpoint>;
dai-format = "left_j";
bitclock-master = <&rsnd_for_ak4613>;
frame-master = <&rsnd_for_ak4613>;
playback = <&ssi3>, <&src5>, <&dvc0>;
capture = <&ssi4>, <&src6>, <&dvc1>;
};
};
};
};
&rwdt {
timeout-sec = <60>;
status = "okay";
};
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
status = "okay";
};
&sdhi2 {
/* used for on-board eMMC */
pinctrl-0 = <&sdhi2_pins>;
pinctrl-1 = <&sdhi2_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
bus-width = <8>;
mmc-hs200-1_8v;
no-sd;
no-sdio;
non-removable;
status = "okay";
};
&ssi4 {
shared-pin;
};
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
renesas,no-otg-pins;
status = "okay";
};
&vin4 {
pinctrl-0 = <&vin4_pins_cvbs>;
pinctrl-names = "default";
status = "okay";
ports {
port {
vin4_in: endpoint {
remote-endpoint = <&adv7180_out>;
};
};
};
};

801
arch/arm64/boot/dts/renesas/ebisu.dtsi Normal file
View File

@ -0,0 +1,801 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the Ebisu board
*
* Copyright (C) 2018 Renesas Electronics Corp.
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Renesas Ebisu board";
compatible = "renesas,ebisu";
aliases {
serial0 = &scif2;
ethernet0 = &avb;
mmc0 = &sdhi3;
mmc1 = &sdhi0;
mmc2 = &sdhi1;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
audio_clkout: audio-clkout {
/*
* This is same as <&rcar_sound 0>
* but needed to avoid cs2000/rcar_sound probe dead-lock
*/
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <11289600>;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm3 0 50000>;
brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
default-brightness-level = <10>;
power-supply = <&reg_12p0v>;
};
cvbs-in {
compatible = "composite-video-connector";
label = "CVBS IN";
port {
cvbs_con: endpoint {
remote-endpoint = <&adv7482_ain7>;
};
};
};
hdmi-in {
compatible = "hdmi-connector";
label = "HDMI IN";
type = "a";
port {
hdmi_in_con: endpoint {
remote-endpoint = <&adv7482_hdmi>;
};
};
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_out: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&keys_pins>;
pinctrl-names = "default";
key-1 {
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
label = "SW4-1";
wakeup-source;
debounce-interval = <20>;
};
key-2 {
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_2>;
label = "SW4-2";
wakeup-source;
debounce-interval = <20>;
};
key-3 {
gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>;
label = "SW4-3";
wakeup-source;
debounce-interval = <20>;
};
key-4 {
gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_4>;
label = "SW4-4";
wakeup-source;
debounce-interval = <20>;
};
};
lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <&reg_3p3v>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
thc63lvd1024_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
port@2 {
reg = <2>;
thc63lvd1024_out: endpoint {
remote-endpoint = <&adv7511_in>;
};
};
};
};
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
reg_1p8v: regulator0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator1 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_12p0v: regulator2 {
compatible = "regulator-fixed";
regulator-name = "D12.0V";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-boot-on;
regulator-always-on;
};
rsnd_ak4613: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rsnd-ak4613";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&sndcpu>;
simple-audio-card,frame-master = <&sndcpu>;
sndcodec: simple-audio-card,codec {
sound-dai = <&ak4613>;
};
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
};
vbus0_usb2: regulator-vbus0-usb2 {
compatible = "regulator-fixed";
regulator-name = "USB20_VBUS_CN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1>, <1800000 0>;
};
vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
regulator-name = "SDHI1 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi1: regulator-vccq-sdhi1 {
compatible = "regulator-gpio";
regulator-name = "SDHI1 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1>, <1800000 0>;
};
vga {
compatible = "vga-connector";
port {
vga_in: endpoint {
remote-endpoint = <&adv7123_out>;
};
};
};
vga-encoder {
compatible = "adi,adv7123";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7123_in: endpoint {
remote-endpoint = <&du_out_rgb>;
};
};
port@1 {
reg = <1>;
adv7123_out: endpoint {
remote-endpoint = <&vga_in>;
};
};
};
};
x12_clk: x12 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
x13_clk: x13 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
};
&audio_clk_a {
clock-frequency = <22579200>;
};
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-handle = <&phy0>;
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
/*
* TX clock internal delay mode is required for reliable
* 1Gbps communication using the KSZ9031RNX phy present on
* the Ebisu board, however, TX clock internal delay mode
* isn't supported on R-Car E3(e). Thus, limit speed to
* 100Mbps for reliable communication.
*/
max-speed = <100>;
};
};
&canfd {
pinctrl-0 = <&canfd0_pins>;
pinctrl-names = "default";
status = "okay";
channel0 {
status = "okay";
};
};
&csi40 {
status = "okay";
ports {
port@0 {
csi40_in: endpoint {
clock-lanes = <0>;
data-lanes = <1 2>;
remote-endpoint = <&adv7482_txa>;
};
};
};
};
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
status = "okay";
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&x13_clk>;
clock-names = "du.0", "du.1", "dclkin.0";
ports {
port@0 {
endpoint {
remote-endpoint = <&adv7123_in>;
};
};
};
};
&ehci0 {
dr_mode = "otg";
status = "okay";
};
&extal_clk {
clock-frequency = <48000000>;
};
&hsusb {
dr_mode = "otg";
status = "okay";
};
&i2c0 {
status = "okay";
io_expander: gpio@20 {
compatible = "onnn,pca9654";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio2>;
interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
};
hdmi-encoder@39 {
compatible = "adi,adv7511w";
reg = <0x39>;
interrupt-parent = <&gpio1>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7511_in: endpoint {
remote-endpoint = <&thc63lvd1024_out>;
};
};
port@1 {
reg = <1>;
adv7511_out: endpoint {
remote-endpoint = <&hdmi_con_out>;
};
};
};
};
video-receiver@70 {
compatible = "adi,adv7482";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&gpio0>;
interrupt-names = "intrq1", "intrq2";
interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
<17 IRQ_TYPE_LEVEL_LOW>;
port@7 {
reg = <7>;
adv7482_ain7: endpoint {
remote-endpoint = <&cvbs_con>;
};
};
port@8 {
reg = <8>;
adv7482_hdmi: endpoint {
remote-endpoint = <&hdmi_in_con>;
};
};
port@a {
reg = <10>;
adv7482_txa: endpoint {
clock-lanes = <0>;
data-lanes = <1 2>;
remote-endpoint = <&csi40_in>;
};
};
};
};
&i2c3 {
status = "okay";
ak4613: codec@10 {
compatible = "asahi-kasei,ak4613";
#sound-dai-cells = <0>;
reg = <0x10>;
clocks = <&rcar_sound 3>;
asahi-kasei,in1-single-end;
asahi-kasei,in2-single-end;
asahi-kasei,out1-single-end;
asahi-kasei,out2-single-end;
asahi-kasei,out3-single-end;
asahi-kasei,out4-single-end;
asahi-kasei,out5-single-end;
asahi-kasei,out6-single-end;
};
cs2000: clk-multiplier@4f {
#clock-cells = <0>;
compatible = "cirrus,cs2000-cp";
reg = <0x4f>;
clocks = <&audio_clkout>, <&x12_clk>;
clock-names = "clk_in", "ref_clk";
assigned-clocks = <&cs2000>;
assigned-clock-rates = <24576000>; /* 1/1 divide */
};
};
&i2c_dvfs {
status = "okay";
clock-frequency = <400000>;
pmic: pmic@30 {
pinctrl-0 = <&irq0_pins>;
pinctrl-names = "default";
compatible = "rohm,bd9571mwv";
reg = <0x30>;
interrupt-parent = <&intc_ex>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
rohm,ddr-backup-power = <0x1>;
rohm,rstbmode-level;
};
eeprom@50 {
compatible = "rohm,br24t01", "atmel,24c01";
reg = <0x50>;
pagesize = <8>;
};
};
&lvds0 {
status = "okay";
clocks = <&cpg CPG_MOD 727>,
<&x13_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
ports {
port@1 {
lvds0_out: endpoint {
remote-endpoint = <&thc63lvd1024_in>;
};
};
};
};
&lvds1 {
/*
* Even though the LVDS1 output is not connected, the encoder must be
* enabled to supply a pixel clock to the DU for the DPAD output when
* LVDS0 is in use.
*/
status = "okay";
clocks = <&cpg CPG_MOD 727>,
<&x13_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
};
&ohci0 {
dr_mode = "otg";
status = "okay";
};
&pcie_bus_clk {
clock-frequency = <100000000>;
};
&pciec0 {
status = "okay";
};
&pfc {
avb_pins: avb {
groups = "avb_link", "avb_mii";
function = "avb";
};
canfd0_pins: canfd0 {
groups = "canfd0_data";
function = "canfd0";
};
du_pins: du {
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
function = "du";
};
irq0_pins: irq0 {
groups = "intc_ex_irq0";
function = "intc_ex";
};
keys_pins: keys {
pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13";
bias-pull-up;
};
pwm3_pins: pwm3 {
groups = "pwm3_b";
function = "pwm3";
};
pwm5_pins: pwm5 {
groups = "pwm5_a";
function = "pwm5";
};
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
};
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <3300>;
};
sdhi0_pins_uhs: sd0_uhs {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <1800>;
};
sdhi1_pins: sd1 {
groups = "sdhi1_data4", "sdhi1_ctrl";
function = "sdhi1";
power-source = <3300>;
};
sdhi1_pins_uhs: sd1_uhs {
groups = "sdhi1_data4", "sdhi1_ctrl";
function = "sdhi1";
power-source = <1800>;
};
sdhi3_pins: sd3 {
groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
function = "sdhi3";
power-source = <1800>;
};
sound_clk_pins: sound_clk {
groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
"audio_clkout_a", "audio_clkout1_a";
function = "audio_clk";
};
sound_pins: sound {
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
function = "ssi";
};
usb0_pins: usb {
groups = "usb0_b", "usb0_id";
function = "usb0";
};
usb30_pins: usb30 {
groups = "usb30";
function = "usb30";
};
};
&pwm3 {
pinctrl-0 = <&pwm3_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm5 {
pinctrl-0 = <&pwm5_pins>;
pinctrl-names = "default";
status = "okay";
};
&rcar_sound {
pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
#sound-dai-cells = <0>;
/* audio_clkout0/1/2/3 */
#clock-cells = <1>;
clock-frequency = <12288000 11289600>;
status = "okay";
/* update <audio_clk_b> to <cs2000> */
clocks = <&cpg CPG_MOD 1005>,
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
<&cpg CPG_CORE R8A77990_CLK_ZA2>;
rcar_sound,dai {
dai0 {
playback = <&ssi0>, <&src0>, <&dvc0>;
capture = <&ssi1>, <&src1>, <&dvc1>;
};
};
};
&rwdt {
timeout-sec = <60>;
status = "okay";
};
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
status = "okay";
};
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-1 = <&sdhi0_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi0>;
vqmmc-supply = <&vccq_sdhi0>;
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&sdhi1 {
pinctrl-0 = <&sdhi1_pins>;
pinctrl-1 = <&sdhi1_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi1>;
vqmmc-supply = <&vccq_sdhi1>;
cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&sdhi3 {
/* used for on-board 8bit eMMC */
pinctrl-0 = <&sdhi3_pins>;
pinctrl-1 = <&sdhi3_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
bus-width = <8>;
no-sd;
no-sdio;
non-removable;
full-pwr-cycle-in-suspend;
status = "okay";
};
&ssi1 {
shared-pin;
};
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
vbus-supply = <&vbus0_usb2>;
status = "okay";
};
&usb3_peri0 {
companion = <&xhci0>;
status = "okay";
};
&vin4 {
status = "okay";
};
&vin5 {
status = "okay";
};
&xhci0 {
pinctrl-0 = <&usb30_pins>;
pinctrl-names = "default";
status = "okay";
};

2
arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
View File

@ -24,6 +24,8 @@
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id001c.c915",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;

11
arch/arm64/boot/dts/renesas/r8a77961.dtsi
View File

@ -1392,6 +1392,17 @@
status = "disabled";
};
tpu: pwm@e6e80000 {
compatible = "renesas,tpu-r8a77961", "renesas,tpu";
reg = <0 0xe6e80000 0 0x148>;
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 304>;
power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
resets = <&cpg 304>;
#pwm-cells = <3>;
status = "disabled";
};
msiof0: spi@e6e90000 {
compatible = "renesas,msiof-r8a77961",
"renesas,rcar-gen3-msiof";

4
arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
View File

@ -8,6 +8,7 @@
/dts-v1/;
#include "r8a77970.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Renesas Eagle board based on r8a77970";
@ -92,10 +93,13 @@
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};

4
arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
View File

@ -8,6 +8,7 @@
/dts-v1/;
#include "r8a77970.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Renesas V3M Starter Kit board";
@ -107,10 +108,13 @@
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
};
};

4
arch/arm64/boot/dts/renesas/r8a77980-condor.dts
View File

@ -8,6 +8,7 @@
/dts-v1/;
#include "r8a77980.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Renesas Condor board based on r8a77980";
@ -132,10 +133,13 @@
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio4>;
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
};
};

4
arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
View File

@ -8,6 +8,7 @@
/dts-v1/;
#include "r8a77980.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Renesas V3H Starter Kit board";
@ -113,9 +114,12 @@
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio4>;
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
};
};

788
arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
View File

@ -7,795 +7,9 @@
/dts-v1/;
#include "r8a77990.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ebisu.dtsi"
/ {
model = "Renesas Ebisu board based on r8a77990";
compatible = "renesas,ebisu", "renesas,r8a77990";
aliases {
serial0 = &scif2;
ethernet0 = &avb;
mmc0 = &sdhi3;
mmc1 = &sdhi0;
mmc2 = &sdhi1;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
audio_clkout: audio-clkout {
/*
* This is same as <&rcar_sound 0>
* but needed to avoid cs2000/rcar_sound probe dead-lock
*/
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <11289600>;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm3 0 50000>;
brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
default-brightness-level = <10>;
power-supply = <&reg_12p0v>;
};
cvbs-in {
compatible = "composite-video-connector";
label = "CVBS IN";
port {
cvbs_con: endpoint {
remote-endpoint = <&adv7482_ain7>;
};
};
};
hdmi-in {
compatible = "hdmi-connector";
label = "HDMI IN";
type = "a";
port {
hdmi_in_con: endpoint {
remote-endpoint = <&adv7482_hdmi>;
};
};
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_out: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&keys_pins>;
pinctrl-names = "default";
key-1 {
gpios = <&gpio5 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
label = "SW4-1";
wakeup-source;
debounce-interval = <20>;
};
key-2 {
gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
linux,code = <KEY_2>;
label = "SW4-2";
wakeup-source;
debounce-interval = <20>;
};
key-3 {
gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>;
label = "SW4-3";
wakeup-source;
debounce-interval = <20>;
};
key-4 {
gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_4>;
label = "SW4-4";
wakeup-source;
debounce-interval = <20>;
};
};
lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <&reg_3p3v>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
thc63lvd1024_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
port@2 {
reg = <2>;
thc63lvd1024_out: endpoint {
remote-endpoint = <&adv7511_in>;
};
};
};
};
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
reg_1p8v: regulator0 {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator1 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_12p0v: regulator2 {
compatible = "regulator-fixed";
regulator-name = "D12.0V";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-boot-on;
regulator-always-on;
};
rsnd_ak4613: sound {
compatible = "simple-audio-card";
simple-audio-card,name = "rsnd-ak4613";
simple-audio-card,format = "left_j";
simple-audio-card,bitclock-master = <&sndcpu>;
simple-audio-card,frame-master = <&sndcpu>;
sndcodec: simple-audio-card,codec {
sound-dai = <&ak4613>;
};
sndcpu: simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
};
vbus0_usb2: regulator-vbus0-usb2 {
compatible = "regulator-fixed";
regulator-name = "USB20_VBUS_CN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1>, <1800000 0>;
};
vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
regulator-name = "SDHI1 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi1: regulator-vccq-sdhi1 {
compatible = "regulator-gpio";
regulator-name = "SDHI1 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
gpios-states = <1>;
states = <3300000 1>, <1800000 0>;
};
vga {
compatible = "vga-connector";
port {
vga_in: endpoint {
remote-endpoint = <&adv7123_out>;
};
};
};
vga-encoder {
compatible = "adi,adv7123";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7123_in: endpoint {
remote-endpoint = <&du_out_rgb>;
};
};
port@1 {
reg = <1>;
adv7123_out: endpoint {
remote-endpoint = <&vga_in>;
};
};
};
};
x12_clk: x12 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
x13_clk: x13 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
};
&audio_clk_a {
clock-frequency = <22579200>;
};
&avb {
pinctrl-0 = <&avb_pins>;
pinctrl-names = "default";
phy-handle = <&phy0>;
status = "okay";
phy0: ethernet-phy@0 {
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio2>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
/*
* TX clock internal delay mode is required for reliable
* 1Gbps communication using the KSZ9031RNX phy present on
* the Ebisu board, however, TX clock internal delay mode
* isn't supported on r8a77990. Thus, limit speed to
* 100Mbps for reliable communication.
*/
max-speed = <100>;
};
};
&canfd {
pinctrl-0 = <&canfd0_pins>;
pinctrl-names = "default";
status = "okay";
channel0 {
status = "okay";
};
};
&csi40 {
status = "okay";
ports {
port@0 {
csi40_in: endpoint {
clock-lanes = <0>;
data-lanes = <1 2>;
remote-endpoint = <&adv7482_txa>;
};
};
};
};
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
status = "okay";
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&x13_clk>;
clock-names = "du.0", "du.1", "dclkin.0";
ports {
port@0 {
endpoint {
remote-endpoint = <&adv7123_in>;
};
};
};
};
&ehci0 {
dr_mode = "otg";
status = "okay";
};
&extal_clk {
clock-frequency = <48000000>;
};
&hsusb {
dr_mode = "otg";
status = "okay";
};
&i2c0 {
status = "okay";
io_expander: gpio@20 {
compatible = "onnn,pca9654";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
interrupt-parent = <&gpio2>;
interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
};
hdmi-encoder@39 {
compatible = "adi,adv7511w";
reg = <0x39>;
interrupt-parent = <&gpio1>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7511_in: endpoint {
remote-endpoint = <&thc63lvd1024_out>;
};
};
port@1 {
reg = <1>;
adv7511_out: endpoint {
remote-endpoint = <&hdmi_con_out>;
};
};
};
};
video-receiver@70 {
compatible = "adi,adv7482";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&gpio0>;
interrupt-names = "intrq1", "intrq2";
interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
<17 IRQ_TYPE_LEVEL_LOW>;
port@7 {
reg = <7>;
adv7482_ain7: endpoint {
remote-endpoint = <&cvbs_con>;
};
};
port@8 {
reg = <8>;
adv7482_hdmi: endpoint {
remote-endpoint = <&hdmi_in_con>;
};
};
port@a {
reg = <10>;
adv7482_txa: endpoint {
clock-lanes = <0>;
data-lanes = <1 2>;
remote-endpoint = <&csi40_in>;
};
};
};
};
&i2c3 {
status = "okay";
ak4613: codec@10 {
compatible = "asahi-kasei,ak4613";
#sound-dai-cells = <0>;
reg = <0x10>;
clocks = <&rcar_sound 3>;
asahi-kasei,in1-single-end;
asahi-kasei,in2-single-end;
asahi-kasei,out1-single-end;
asahi-kasei,out2-single-end;
asahi-kasei,out3-single-end;
asahi-kasei,out4-single-end;
asahi-kasei,out5-single-end;
asahi-kasei,out6-single-end;
};
cs2000: clk-multiplier@4f {
#clock-cells = <0>;
compatible = "cirrus,cs2000-cp";
reg = <0x4f>;
clocks = <&audio_clkout>, <&x12_clk>;
clock-names = "clk_in", "ref_clk";
assigned-clocks = <&cs2000>;
assigned-clock-rates = <24576000>; /* 1/1 divide */
};
};
&i2c_dvfs {
status = "okay";
clock-frequency = <400000>;
pmic: pmic@30 {
pinctrl-0 = <&irq0_pins>;
pinctrl-names = "default";
compatible = "rohm,bd9571mwv";
reg = <0x30>;
interrupt-parent = <&intc_ex>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
rohm,ddr-backup-power = <0x1>;
rohm,rstbmode-level;
};
eeprom@50 {
compatible = "rohm,br24t01", "atmel,24c01";
reg = <0x50>;
pagesize = <8>;
};
};
&lvds0 {
status = "okay";
clocks = <&cpg CPG_MOD 727>,
<&x13_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
ports {
port@1 {
lvds0_out: endpoint {
remote-endpoint = <&thc63lvd1024_in>;
};
};
};
};
&lvds1 {
/*
* Even though the LVDS1 output is not connected, the encoder must be
* enabled to supply a pixel clock to the DU for the DPAD output when
* LVDS0 is in use.
*/
status = "okay";
clocks = <&cpg CPG_MOD 727>,
<&x13_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
};
&ohci0 {
dr_mode = "otg";
status = "okay";
};
&pcie_bus_clk {
clock-frequency = <100000000>;
};
&pciec0 {
status = "okay";
};
&pfc {
avb_pins: avb {
groups = "avb_link", "avb_mii";
function = "avb";
};
canfd0_pins: canfd0 {
groups = "canfd0_data";
function = "canfd0";
};
du_pins: du {
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
function = "du";
};
irq0_pins: irq0 {
groups = "intc_ex_irq0";
function = "intc_ex";
};
keys_pins: keys {
pins = "GP_5_10", "GP_5_11", "GP_5_12", "GP_5_13";
bias-pull-up;
};
pwm3_pins: pwm3 {
groups = "pwm3_b";
function = "pwm3";
};
pwm5_pins: pwm5 {
groups = "pwm5_a";
function = "pwm5";
};
scif2_pins: scif2 {
groups = "scif2_data_a";
function = "scif2";
};
sdhi0_pins: sd0 {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <3300>;
};
sdhi0_pins_uhs: sd0_uhs {
groups = "sdhi0_data4", "sdhi0_ctrl";
function = "sdhi0";
power-source = <1800>;
};
sdhi1_pins: sd1 {
groups = "sdhi1_data4", "sdhi1_ctrl";
function = "sdhi1";
power-source = <3300>;
};
sdhi1_pins_uhs: sd1_uhs {
groups = "sdhi1_data4", "sdhi1_ctrl";
function = "sdhi1";
power-source = <1800>;
};
sdhi3_pins: sd3 {
groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
function = "sdhi3";
power-source = <1800>;
};
sound_clk_pins: sound_clk {
groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a",
"audio_clkout_a", "audio_clkout1_a";
function = "audio_clk";
};
sound_pins: sound {
groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data";
function = "ssi";
};
usb0_pins: usb {
groups = "usb0_b", "usb0_id";
function = "usb0";
};
usb30_pins: usb30 {
groups = "usb30";
function = "usb30";
};
};
&pwm3 {
pinctrl-0 = <&pwm3_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm5 {
pinctrl-0 = <&pwm5_pins>;
pinctrl-names = "default";
status = "okay";
};
&rcar_sound {
pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
#sound-dai-cells = <0>;
/* audio_clkout0/1/2/3 */
#clock-cells = <1>;
clock-frequency = <12288000 11289600>;
status = "okay";
/* update <audio_clk_b> to <cs2000> */
clocks = <&cpg CPG_MOD 1005>,
<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&audio_clk_a>, <&cs2000>, <&audio_clk_c>,
<&cpg CPG_CORE R8A77990_CLK_ZA2>;
rcar_sound,dai {
dai0 {
playback = <&ssi0>, <&src0>, <&dvc0>;
capture = <&ssi1>, <&src1>, <&dvc1>;
};
};
};
&rwdt {
timeout-sec = <60>;
status = "okay";
};
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
status = "okay";
};
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-1 = <&sdhi0_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi0>;
vqmmc-supply = <&vccq_sdhi0>;
cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&sdhi1 {
pinctrl-0 = <&sdhi1_pins>;
pinctrl-1 = <&sdhi1_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&vcc_sdhi1>;
vqmmc-supply = <&vccq_sdhi1>;
cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
bus-width = <4>;
sd-uhs-sdr50;
sd-uhs-sdr104;
status = "okay";
};
&sdhi3 {
/* used for on-board 8bit eMMC */
pinctrl-0 = <&sdhi3_pins>;
pinctrl-1 = <&sdhi3_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
bus-width = <8>;
no-sd;
no-sdio;
non-removable;
full-pwr-cycle-in-suspend;
status = "okay";
};
&ssi1 {
shared-pin;
};
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
vbus-supply = <&vbus0_usb2>;
status = "okay";
};
&usb3_peri0 {
companion = <&xhci0>;
status = "okay";
};
&vin4 {
status = "okay";
};
&vin5 {
status = "okay";
};
&xhci0 {
pinctrl-0 = <&usb30_pins>;
pinctrl-names = "default";
status = "okay";
};

671
arch/arm64/boot/dts/renesas/r8a77995-draak.dts
View File

@ -8,678 +8,9 @@
/dts-v1/;
#include "r8a77995.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "draak.dtsi"
/ {
model = "Renesas Draak board based on r8a77995";
compatible = "renesas,draak", "renesas,r8a77995";
aliases {
serial0 = &scif2;
ethernet0 = &avb;
};
audio_clkout: audio-clkout {
/*
* This is same as <&rcar_sound 0>
* but needed to avoid cs2000/rcar_sound probe dead-lock
*/
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <12288000>;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm1 0 50000>;
brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
default-brightness-level = <10>;
power-supply = <&reg_12p0v>;
enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
stdout-path = "serial0:115200n8";
};
composite-in {
compatible = "composite-video-connector";
port {
composite_con_in: endpoint {
remote-endpoint = <&adv7180_in>;
};
};
};
hdmi-in {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&adv7612_in>;
};
};
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_out: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&keys_pins>;
pinctrl-names = "default";
key-1 {
gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
label = "SW56-1";
wakeup-source;
debounce-interval = <20>;
};
key-2 {
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_2>;
label = "SW56-2";
wakeup-source;
debounce-interval = <20>;
};
key-3 {
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>;
label = "SW56-3";
wakeup-source;
debounce-interval = <20>;
};
key-4 {
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_4>;
label = "SW56-4";
wakeup-source;
debounce-interval = <20>;
};
};
lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <&reg_3p3v>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
thc63lvd1024_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
port@2 {
reg = <2>;
thc63lvd1024_out: endpoint {
remote-endpoint = <&adv7511_in>;
};
};
};
};
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x18000000>;
};
reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
reg_12p0v: regulator-12p0v {
compatible = "regulator-fixed";
regulator-name = "D12.0V";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-boot-on;
regulator-always-on;
};
sound_card: sound {
compatible = "audio-graph-card";
dais = <&rsnd_port0 /* ak4613 */
/* HDMI is not yet supported */
>;
};
vga {
compatible = "vga-connector";
port {
vga_in: endpoint {
remote-endpoint = <&adv7123_out>;
};
};
};
vga-encoder {
compatible = "adi,adv7123";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7123_in: endpoint {
remote-endpoint = <&du_out_rgb>;
};
};
port@1 {
reg = <1>;
adv7123_out: endpoint {
remote-endpoint = <&vga_in>;
};
};
};
};
x12_clk: x12 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <74250000>;
};
x19_clk: x19 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24576000>;
};
};
&audio_clk_b {
/*
* X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB,
* and R-Car Sound uses AUDIO_CLKB.
* Note is that schematic indicates VI4_FIELD conection only
* not AUDIO_CLKB at SoC page.
* And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60.
* SW60 should be 1-2.
*/
clock-frequency = <22579200>;
};
&avb {
pinctrl-0 = <&avb0_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
phy-handle = <&phy0>;
status = "okay";
phy0: ethernet-phy@0 {
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio5>;
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
/*
* TX clock internal delay mode is required for reliable
* 1Gbps communication using the KSZ9031RNX phy present on
* the Draak board, however, TX clock internal delay mode
* isn't supported on r8a77995. Thus, limit speed to
* 100Mbps for reliable communication.
*/
max-speed = <100>;
};
};
&can0 {
pinctrl-0 = <&can0_pins>;
pinctrl-names = "default";
status = "okay";
};
&can1 {
pinctrl-0 = <&can1_pins>;
pinctrl-names = "default";
status = "okay";
};
&du {
pinctrl-0 = <&du_pins>;
pinctrl-names = "default";
status = "okay";
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&x12_clk>;
clock-names = "du.0", "du.1", "dclkin.0";
ports {
port@0 {
endpoint {
remote-endpoint = <&adv7123_in>;
};
};
};
};
&ehci0 {
dr_mode = "host";
status = "okay";
};
&extal_clk {
clock-frequency = <48000000>;
};
&hsusb {
dr_mode = "host";
status = "okay";
};
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
status = "okay";
ak4613: codec@10 {
compatible = "asahi-kasei,ak4613";
#sound-dai-cells = <0>;
reg = <0x10>;
clocks = <&rcar_sound 0>; /* audio_clkout */
asahi-kasei,in1-single-end;
asahi-kasei,in2-single-end;
asahi-kasei,out1-single-end;
asahi-kasei,out2-single-end;
asahi-kasei,out3-single-end;
asahi-kasei,out4-single-end;
asahi-kasei,out5-single-end;
asahi-kasei,out6-single-end;
port {
ak4613_endpoint: endpoint {
remote-endpoint = <&rsnd_for_ak4613>;
};
};
};
composite-in@20 {
compatible = "adi,adv7180cp";
reg = <0x20>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7180_in: endpoint {
remote-endpoint = <&composite_con_in>;
};
};
port@3 {
reg = <3>;
/*
* The VIN4 video input path is shared between
* CVBS and HDMI inputs through SW[49-53]
* switches.
*
* CVBS is the default selection, link it to
* VIN4 here.
*/
adv7180_out: endpoint {
remote-endpoint = <&vin4_in>;
};
};
};
};
hdmi-encoder@39 {
compatible = "adi,adv7511w";
reg = <0x39>, <0x3f>, <0x3c>, <0x38>;
reg-names = "main", "edid", "cec", "packet";
interrupt-parent = <&gpio1>;
interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7511_in: endpoint {
remote-endpoint = <&thc63lvd1024_out>;
};
};
port@1 {
reg = <1>;
adv7511_out: endpoint {
remote-endpoint = <&hdmi_con_out>;
};
};
};
};
hdmi-decoder@4c {
compatible = "adi,adv7612";
reg = <0x4c>;
default-input = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7612_in: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
port@2 {
reg = <2>;
/*
* The VIN4 video input path is shared between
* CVBS and HDMI inputs through SW[49-53]
* switches.
*
* CVBS is the default selection, leave HDMI
* not connected here.
*/
adv7612_out: endpoint {
pclk-sample = <0>;
hsync-active = <0>;
vsync-active = <0>;
};
};
};
};
cs2000: clk-multiplier@4f {
#clock-cells = <0>;
compatible = "cirrus,cs2000-cp";
reg = <0x4f>;
clocks = <&audio_clkout>, <&x19_clk>; /* audio_clkout_1, x19 */
clock-names = "clk_in", "ref_clk";
assigned-clocks = <&cs2000>;
assigned-clock-rates = <24576000>; /* 1/1 divide */
};
eeprom@50 {
compatible = "rohm,br24t01", "atmel,24c01";
reg = <0x50>;
pagesize = <8>;
};
};
&i2c1 {
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
status = "okay";
};
&lvds0 {
status = "okay";
clocks = <&cpg CPG_MOD 727>,
<&x12_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
ports {
port@1 {
lvds0_out: endpoint {
remote-endpoint = <&thc63lvd1024_in>;
};
};
};
};
&lvds1 {
/*
* Even though the LVDS1 output is not connected, the encoder must be
* enabled to supply a pixel clock to the DU for the DPAD output when
* LVDS0 is in use.
*/
status = "okay";
clocks = <&cpg CPG_MOD 727>,
<&x12_clk>,
<&extal_clk>;
clock-names = "fck", "dclkin.0", "extal";
};
&ohci0 {
dr_mode = "host";
status = "okay";
};
&pfc {
avb0_pins: avb {
groups = "avb0_link", "avb0_mdio", "avb0_mii";
function = "avb0";
};
can0_pins: can0 {
groups = "can0_data_a";
function = "can0";
};
can1_pins: can1 {
groups = "can1_data_a";
function = "can1";
};
du_pins: du {
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
function = "du";
};
i2c0_pins: i2c0 {
groups = "i2c0";
function = "i2c0";
};
i2c1_pins: i2c1 {
groups = "i2c1";
function = "i2c1";
};
keys_pins: keys {
pins = "GP_4_12", "GP_4_13", "GP_4_14", "GP_4_15";
bias-pull-up;
};
pwm0_pins: pwm0 {
groups = "pwm0_c";
function = "pwm0";
};
pwm1_pins: pwm1 {
groups = "pwm1_c";
function = "pwm1";
};
scif2_pins: scif2 {
groups = "scif2_data";
function = "scif2";
};
sdhi2_pins: sd2 {
groups = "mmc_data8", "mmc_ctrl";
function = "mmc";
power-source = <1800>;
};
sdhi2_pins_uhs: sd2_uhs {
groups = "mmc_data8", "mmc_ctrl";
function = "mmc";
power-source = <1800>;
};
sound_pins: sound {
groups = "ssi34_ctrl", "ssi3_data", "ssi4_data_a";
function = "ssi";
};
sound_clk_pins: sound-clk {
groups = "audio_clk_a", "audio_clk_b",
"audio_clkout", "audio_clkout1";
function = "audio_clk";
};
usb0_pins: usb0 {
groups = "usb0";
function = "usb0";
};
vin4_pins_cvbs: vin4 {
groups = "vin4_data8", "vin4_sync", "vin4_clk";
function = "vin4";
};
};
&pwm0 {
pinctrl-0 = <&pwm0_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm1 {
pinctrl-0 = <&pwm1_pins>;
pinctrl-names = "default";
status = "okay";
};
&rcar_sound {
pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
pinctrl-names = "default";
/* Single DAI */
#sound-dai-cells = <0>;
/* audio_clkout0/1 */
#clock-cells = <1>;
clock-frequency = <12288000 11289600>;
status = "okay";
clocks = <&cpg CPG_MOD 1005>,
<&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
<&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
<&cs2000>, <&audio_clk_b>,
<&cpg CPG_CORE R8A77995_CLK_ZA2>;
ports {
rsnd_port0: port {
rsnd_for_ak4613: endpoint {
remote-endpoint = <&ak4613_endpoint>;
dai-format = "left_j";
bitclock-master = <&rsnd_for_ak4613>;
frame-master = <&rsnd_for_ak4613>;
playback = <&ssi3>, <&src5>, <&dvc0>;
capture = <&ssi4>, <&src6>, <&dvc1>;
};
};
};
};
&rwdt {
timeout-sec = <60>;
status = "okay";
};
&scif2 {
pinctrl-0 = <&scif2_pins>;
pinctrl-names = "default";
status = "okay";
};
&sdhi2 {
/* used for on-board eMMC */
pinctrl-0 = <&sdhi2_pins>;
pinctrl-1 = <&sdhi2_pins_uhs>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&reg_3p3v>;
vqmmc-supply = <&reg_1p8v>;
bus-width = <8>;
mmc-hs200-1_8v;
no-sd;
no-sdio;
non-removable;
status = "okay";
};
&ssi4 {
shared-pin;
};
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
renesas,no-otg-pins;
status = "okay";
};
&vin4 {
pinctrl-0 = <&vin4_pins_cvbs>;
pinctrl-names = "default";
status = "okay";
ports {
port {
vin4_in: endpoint {
remote-endpoint = <&adv7180_out>;
};
};
};
};

37
arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
View File

@ -6,6 +6,7 @@
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include "r8a779a0.dtsi"
@ -22,6 +23,37 @@
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&keys_pins>;
pinctrl-names = "default";
key-1 {
gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_1>;
label = "SW47";
wakeup-source;
debounce-interval = <20>;
};
key-2 {
gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
linux,code = <KEY_2>;
label = "SW48";
wakeup-source;
debounce-interval = <20>;
};
key-3 {
gpios = <&gpio6 20 GPIO_ACTIVE_LOW>;
linux,code = <KEY_3>;
label = "SW49";
wakeup-source;
debounce-interval = <20>;
};
};
leds {
compatible = "gpio-leds";
@ -160,6 +192,11 @@
function = "i2c6";
};
keys_pins: keys {
pins = "GP_6_18", "GP_6_19", "GP_6_20";
bias-pull-up;
};
mmc_pins: mmc {
groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
function = "mmc";

2
arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
View File

@ -27,6 +27,8 @@
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio4>;

109
arch/arm64/boot/dts/renesas/r8a779a0.dtsi
View File

@ -933,6 +933,17 @@
status = "disabled";
};
tpu: pwm@e6e80000 {
compatible = "renesas,tpu-r8a779a0", "renesas,tpu";
reg = <0 0xe6e80000 0 0x148>;
interrupts = <GIC_SPI 515 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 718>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 718>;
#pwm-cells = <3>;
status = "disabled";
};
msiof0: spi@e6e90000 {
compatible = "renesas,msiof-r8a779a0",
"renesas,rcar-gen3-msiof";
@ -1090,9 +1101,107 @@
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
resets = <&cpg 706>;
max-frequency = <200000000>;
iommus = <&ipmmu_ds0 32>;
status = "disabled";
};
ipmmu_rt0: iommu@ee480000 {
compatible = "renesas,ipmmu-r8a779a0";
reg = <0 0xee480000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 10>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
ipmmu_rt1: iommu@ee4c0000 {
compatible = "renesas,ipmmu-r8a779a0";
reg = <0 0xee4c0000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 19>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
ipmmu_ds0: iommu@eed00000 {
compatible = "renesas,ipmmu-r8a779a0";
reg = <0 0xeed00000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 0>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
ipmmu_ds1: iommu@eed40000 {
compatible = "renesas,ipmmu-r8a779a0";
reg = <0 0xeed40000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 1>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
ipmmu_ir: iommu@eed80000 {
compatible = "renesas,ipmmu-r8a779a0";
reg = <0 0xeed80000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 3>;
power-domains = <&sysc R8A779A0_PD_A3IR>;
#iommu-cells = <1>;
};
ipmmu_vc0: iommu@eedc0000 {
compatible = "renesas,ipmmu-r8a779a0";
reg = <0 0xeedc0000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 12>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
ipmmu_vi0: iommu@eee80000 {
compatible = "renesas,ipmmu-r8a779a0";
reg = <0 0xeee80000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 14>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
ipmmu_vi1: iommu@eeec0000 {
compatible = "renesas,ipmmu-r8a779a0";
reg = <0 0xeeec0000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 15>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
ipmmu_3dg: iommu@eee00000 {
compatible = "renesas,ipmmu-r8a779a0";
reg = <0 0xeee00000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 6>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
ipmmu_vip0: iommu@eef00000 {
compatible = "renesas,ipmmu-r8a779a0";
reg = <0 0xeef00000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 5>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
ipmmu_vip1: iommu@eef40000 {
compatible = "renesas,ipmmu-r8a779a0";
reg = <0 0xeef40000 0 0x20000>;
renesas,ipmmu-main = <&ipmmu_mm 11>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
ipmmu_mm: iommu@eefc0000 {
compatible = "renesas,ipmmu-r8a779a0";
reg = <0 0xeefc0000 0 0x20000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
#iommu-cells = <1>;
};
gic: interrupt-controller@f1000000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;

12
arch/arm64/boot/dts/renesas/r8a779m0.dtsi Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0 or MIT)
/*
* Device Tree Source for the R-Car H3e (R8A779M0) SoC
*
* Copyright (C) 2021 Glider bv
*/
#include "r8a77951.dtsi"
/ {
compatible = "renesas,r8a779m0", "renesas,r8a7795";
};

12
arch/arm64/boot/dts/renesas/r8a779m2.dtsi Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0 or MIT)
/*
* Device Tree Source for the R-Car M3e (R8A779M2) SoC
*
* Copyright (C) 2021 Glider bv
*/
#include "r8a77961.dtsi"
/ {
compatible = "renesas,r8a779m2", "renesas,r8a77961";
};

12
arch/arm64/boot/dts/renesas/r8a779m4.dtsi Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0 or MIT)
/*
* Device Tree Source for the R-Car M3Ne (R8A779M4) SoC
*
* Copyright (C) 2021 Glider bv
*/
#include "r8a77965.dtsi"
/ {
compatible = "renesas,r8a779m4", "renesas,r8a77965";
};

36
arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts Normal file
View File

@ -0,0 +1,36 @@
// SPDX-License-Identifier: (GPL-2.0 or MIT)
/*
* Device Tree Source for the Salvator-X 2nd version board with R-Car M3Ne-2G
*
* Copyright (C) 2021 Glider bv
*
* Based on r8a77965-salvator-xs.dts
* Copyright (C) 2017 Renesas Electronics Corp.
*/
/dts-v1/;
#include "r8a779m5.dtsi"
#include "salvator-xs.dtsi"
/ {
model = "Renesas Salvator-X 2nd version board based on r8a779m5";
compatible = "renesas,salvator-xs", "renesas,r8a779m5",
"renesas,r8a77965";
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x78000000>;
};
};
&du {
clocks = <&cpg CPG_MOD 724>,
<&cpg CPG_MOD 723>,
<&cpg CPG_MOD 721>,
<&versaclock6 1>,
<&x21_clk>,
<&versaclock6 2>;
clock-names = "du.0", "du.1", "du.3",
"dclkin.0", "dclkin.1", "dclkin.3";
};

12
arch/arm64/boot/dts/renesas/r8a779m5.dtsi Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0 or MIT)
/*
* Device Tree Source for the R-Car M3Ne-2G (R8A779M5) SoC
*
* Copyright (C) 2021 Glider bv
*/
#include "r8a77965.dtsi"
/ {
compatible = "renesas,r8a779m5", "renesas,r8a77965";
};

12
arch/arm64/boot/dts/renesas/r8a779m6.dtsi Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0 or MIT)
/*
* Device Tree Source for the R-Car E3e (R8A779M6) SoC
*
* Copyright (C) 2021 Glider bv
*/
#include "r8a77990.dtsi"
/ {
compatible = "renesas,r8a779m6", "renesas,r8a77990";
};

12
arch/arm64/boot/dts/renesas/r8a779m7.dtsi Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0 or MIT)
/*
* Device Tree Source for the R-Car D3e (R8A779M7) SoC
*
* Copyright (C) 2021 Glider bv
*/
#include "r8a77995.dtsi"
/ {
compatible = "renesas,r8a779m7", "renesas,r8a77995";
};

12
arch/arm64/boot/dts/renesas/r8a779m8.dtsi Normal file
View File

@ -0,0 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0 or MIT)
/*
* Device Tree Source for the R-Car H3Ne (R8A779M8) SoC
*
* Copyright (C) 2021 Glider bv
*/
#include "r8a77951.dtsi"
/ {
compatible = "renesas,r8a779m8", "renesas,r8a7795";
};

248
arch/arm64/boot/dts/renesas/r9a07g044.dtsi
View File

@ -13,6 +13,20 @@
#address-cells = <2>;
#size-cells = <2>;
audio_clk1: audio_clk1 {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by boards that provide it */
clock-frequency = <0>;
};
audio_clk2: audio_clk2 {
compatible = "fixed-clock";
#clock-cells = <0>;
/* This value must be overridden by boards that provide it */
clock-frequency = <0>;
};
/* External CAN clock - to be overridden by boards that provide it */
can_clk: can {
compatible = "fixed-clock";
@ -78,6 +92,90 @@
#size-cells = <2>;
ranges;
ssi0: ssi@10049c00 {
compatible = "renesas,r9a07g044-ssi",
"renesas,rz-ssi";
reg = <0 0x10049c00 0 0x400>;
interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 328 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 329 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>,
<&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>,
<&audio_clk1>, <&audio_clk2>;
clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
resets = <&cpg R9A07G044_SSI0_RST_M2_REG>;
dmas = <&dmac 0x2655>, <&dmac 0x2656>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
#sound-dai-cells = <0>;
status = "disabled";
};
ssi1: ssi@1004a000 {
compatible = "renesas,r9a07g044-ssi",
"renesas,rz-ssi";
reg = <0 0x1004a000 0 0x400>;
interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 331 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 332 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 333 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
clocks = <&cpg CPG_MOD R9A07G044_SSI1_PCLK2>,
<&cpg CPG_MOD R9A07G044_SSI1_PCLK_SFR>,
<&audio_clk1>, <&audio_clk2>;
clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
resets = <&cpg R9A07G044_SSI1_RST_M2_REG>;
dmas = <&dmac 0x2659>, <&dmac 0x265a>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
#sound-dai-cells = <0>;
status = "disabled";
};
ssi2: ssi@1004a400 {
compatible = "renesas,r9a07g044-ssi",
"renesas,rz-ssi";
reg = <0 0x1004a400 0 0x400>;
interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 335 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 336 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 337 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
clocks = <&cpg CPG_MOD R9A07G044_SSI2_PCLK2>,
<&cpg CPG_MOD R9A07G044_SSI2_PCLK_SFR>,
<&audio_clk1>, <&audio_clk2>;
clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
resets = <&cpg R9A07G044_SSI2_RST_M2_REG>;
dmas = <&dmac 0x265f>;
dma-names = "rt";
power-domains = <&cpg>;
#sound-dai-cells = <0>;
status = "disabled";
};
ssi3: ssi@1004a800 {
compatible = "renesas,r9a07g044-ssi",
"renesas,rz-ssi";
reg = <0 0x1004a800 0 0x400>;
interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 339 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 340 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 341 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "int_req", "dma_rx", "dma_tx", "dma_rt";
clocks = <&cpg CPG_MOD R9A07G044_SSI3_PCLK2>,
<&cpg CPG_MOD R9A07G044_SSI3_PCLK_SFR>,
<&audio_clk1>, <&audio_clk2>;
clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
resets = <&cpg R9A07G044_SSI3_RST_M2_REG>;
dmas = <&dmac 0x2661>, <&dmac 0x2662>;
dma-names = "tx", "rx";
power-domains = <&cpg>;
#sound-dai-cells = <0>;
status = "disabled";
};
scif0: serial@1004b800 {
compatible = "renesas,scif-r9a07g044";
reg = <0 0x1004b800 0 0x400>;
@ -295,6 +393,42 @@
<&cpg R9A07G044_GPIO_SPARE_RESETN>;
};
dmac: dma-controller@11820000 {
compatible = "renesas,r9a07g044-dmac",
"renesas,rz-dmac";
reg = <0 0x11820000 0 0x10000>,
<0 0x11830000 0 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "error",
"ch0", "ch1", "ch2", "ch3",
"ch4", "ch5", "ch6", "ch7",
"ch8", "ch9", "ch10", "ch11",
"ch12", "ch13", "ch14", "ch15";
clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
<&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
power-domains = <&cpg>;
resets = <&cpg R9A07G044_DMAC_ARESETN>,
<&cpg R9A07G044_DMAC_RST_ASYNC>;
#dma-cells = <1>;
dma-channels = <16>;
};
gic: interrupt-controller@11900000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
@ -304,6 +438,120 @@
<0x0 0x11940000 0 0x60000>;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
};
phyrst: usbphy-ctrl@11c40000 {
compatible = "renesas,r9a07g044-usbphy-ctrl",
"renesas,rzg2l-usbphy-ctrl";
reg = <0 0x11c40000 0 0x10000>;
clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>;
resets = <&cpg R9A07G044_USB_PRESETN>;
power-domains = <&cpg>;
#reset-cells = <1>;
status = "disabled";
};
ohci0: usb@11c50000 {
compatible = "generic-ohci";
reg = <0 0x11c50000 0 0x100>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
<&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
resets = <&phyrst 0>,
<&cpg R9A07G044_USB_U2H0_HRESETN>;
phys = <&usb2_phy0 1>;
phy-names = "usb";
power-domains = <&cpg>;
status = "disabled";
};
ohci1: usb@11c70000 {
compatible = "generic-ohci";
reg = <0 0x11c70000 0 0x100>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
<&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
resets = <&phyrst 1>,
<&cpg R9A07G044_USB_U2H1_HRESETN>;
phys = <&usb2_phy1 1>;
phy-names = "usb";
power-domains = <&cpg>;
status = "disabled";
};
ehci0: usb@11c50100 {
compatible = "generic-ehci";
reg = <0 0x11c50100 0 0x100>;
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
<&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
resets = <&phyrst 0>,
<&cpg R9A07G044_USB_U2H0_HRESETN>;
phys = <&usb2_phy0 2>;
phy-names = "usb";
companion = <&ohci0>;
power-domains = <&cpg>;
status = "disabled";
};
ehci1: usb@11c70100 {
compatible = "generic-ehci";
reg = <0 0x11c70100 0 0x100>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
<&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
resets = <&phyrst 1>,
<&cpg R9A07G044_USB_U2H1_HRESETN>;
phys = <&usb2_phy1 2>;
phy-names = "usb";
companion = <&ohci1>;
power-domains = <&cpg>;
status = "disabled";
};
usb2_phy0: usb-phy@11c50200 {
compatible = "renesas,usb2-phy-r9a07g044",
"renesas,rzg2l-usb2-phy";
reg = <0 0x11c50200 0 0x700>;
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
<&cpg CPG_MOD R9A07G044_USB_U2H0_HCLK>;
resets = <&phyrst 0>;
#phy-cells = <1>;
power-domains = <&cpg>;
status = "disabled";
};
usb2_phy1: usb-phy@11c70200 {
compatible = "renesas,usb2-phy-r9a07g044",
"renesas,rzg2l-usb2-phy";
reg = <0 0x11c70200 0 0x700>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
<&cpg CPG_MOD R9A07G044_USB_U2H1_HCLK>;
resets = <&phyrst 1>;
#phy-cells = <1>;
power-domains = <&cpg>;
status = "disabled";
};
hsusb: usb@11c60000 {
compatible = "renesas,usbhs-r9a07g044",
"renesas,rza2-usbhs";
reg = <0 0x11c60000 0 0x10000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD R9A07G044_USB_PCLK>,
<&cpg CPG_MOD R9A07G044_USB_U2P_EXR_CPUCLK>;
resets = <&phyrst 0>,
<&cpg R9A07G044_USB_U2P_EXL_SYSRST>;
renesas,buswait = <7>;
phys = <&usb2_phy0 3>;
phy-names = "usb";
power-domains = <&cpg>;
status = "disabled";
};
};
timer {

7
arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
View File

@ -7,15 +7,10 @@
/dts-v1/;
#include "r9a07g044l2.dtsi"
#include "rzg2l-smarc-som.dtsi"
#include "rzg2l-smarc.dtsi"
/ {
model = "Renesas SMARC EVK based on r9a07g044l2";
compatible = "renesas,smarc-evk", "renesas,r9a07g044l2", "renesas,r9a07g044";
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x78000000>;
};
};

35
arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi Normal file
View File

@ -0,0 +1,35 @@
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
* Device Tree Source for the RZ/G2L SMARC SOM common parts
*
* Copyright (C) 2021 Renesas Electronics Corp.
*/
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
/ {
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x78000000>;
};
};
&adc {
pinctrl-0 = <&adc_pins>;
pinctrl-names = "default";
status = "okay";
/delete-node/ channel@6;
/delete-node/ channel@7;
};
&extal_clk {
clock-frequency = <24000000>;
};
&pinctrl {
adc_pins: adc {
pinmux = <RZG2L_PORT_PINMUX(9, 0, 2)>; /* ADC_TRG */
};
};

229
arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
View File

@ -6,22 +6,247 @@
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
/*
* SSI-WM8978
*
* This command is required when Playback/Capture
*
* amixer cset name='Left Input Mixer L2 Switch' on
* amixer cset name='Right Input Mixer R2 Switch' on
* amixer cset name='Headphone Playback Volume' 100
* amixer cset name='PCM Volume' 100%
* amixer cset name='Input PGA Volume' 25
*
*/
/ {
aliases {
serial0 = &scif0;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c3 = &i2c3;
};
chosen {
bootargs = "ignore_loglevel";
stdout-path = "serial0:115200n8";
};
audio_mclock: audio_mclock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <11289600>;
};
snd_rzg2l: sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
simple-audio-card,bitclock-master = <&cpu_dai>;
simple-audio-card,frame-master = <&cpu_dai>;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,widgets = "Microphone", "Microphone Jack";
simple-audio-card,routing =
"L2", "Mic Bias",
"R2", "Mic Bias",
"Mic Bias", "Microphone Jack";
cpu_dai: simple-audio-card,cpu {
sound-dai = <&ssi0>;
};
codec_dai: simple-audio-card,codec {
clocks = <&audio_mclock>;
sound-dai = <&wm8978>;
};
};
usb0_vbus_otg: regulator-usb0-vbus-otg {
compatible = "regulator-fixed";
regulator-name = "USB0_VBUS_OTG";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
};
&extal_clk {
clock-frequency = <24000000>;
&audio_clk1{
clock-frequency = <11289600>;
};
&audio_clk2{
clock-frequency = <12288000>;
};
&canfd {
pinctrl-0 = <&can0_pins &can1_pins>;
pinctrl-names = "default";
status = "okay";
channel0 {
status = "okay";
};
channel1 {
status = "okay";
};
};
&ehci0 {
dr_mode = "otg";
status = "okay";
};
&ehci1 {
status = "okay";
};
&hsusb {
dr_mode = "otg";
status = "okay";
};
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
status = "okay";
};
&i2c1 {
pinctrl-0 = <&i2c1_pins>;
pinctrl-names = "default";
status = "okay";
};
&i2c3 {
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
clock-frequency = <400000>;
status = "okay";
wm8978: codec@1a {
compatible = "wlf,wm8978";
#sound-dai-cells = <0>;
reg = <0x1a>;
};
};
&ohci0 {
dr_mode = "otg";
status = "okay";
};
&ohci1 {
status = "okay";
};
&phyrst {
status = "okay";
};
&pinctrl {
pinctrl-0 = <&sound_clk_pins>;
pinctrl-names = "default";
can0_pins: can0 {
pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */
<RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */
};
/* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
can0-stb {
gpio-hog;
gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "can0_stb";
};
can1_pins: can1 {
pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */
<RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */
};
/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
can1-stb {
gpio-hog;
gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "can1_stb";
};
i2c0_pins: i2c0 {
pins = "RIIC0_SDA", "RIIC0_SCL";
input-enable;
};
i2c1_pins: i2c1 {
pins = "RIIC1_SDA", "RIIC1_SCL";
input-enable;
};
i2c3_pins: i2c3 {
pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */
<RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */
};
scif0_pins: scif0 {
pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* TxD */
<RZG2L_PORT_PINMUX(38, 1, 1)>; /* RxD */
};
sound_clk_pins: sound_clk {
pins = "AUDIO_CLK1", "AUDIO_CLK2";
input-enable;
};
ssi0_pins: ssi0 {
pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
<RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
<RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */
<RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
};
usb0_pins: usb0 {
pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
<RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
<RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */
};
usb1_pins: usb1 {
pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */
<RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */
};
};
&scif0 {
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
status = "okay";
};
&ssi0 {
pinctrl-0 = <&ssi0_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb2_phy0 {
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
vbus-supply = <&usb0_vbus_otg>;
status = "okay";
};
&usb2_phy1 {
pinctrl-0 = <&usb1_pins>;
pinctrl-names = "default";
status = "okay";
};

2
arch/arm64/boot/dts/renesas/salvator-common.dtsi
View File

@ -340,6 +340,8 @@
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio2>;

2
arch/arm64/boot/dts/renesas/ulcb.dtsi
View File

@ -154,6 +154,8 @@
status = "okay";
phy0: ethernet-phy@0 {
compatible = "ethernet-phy-id0022.1622",
"ethernet-phy-ieee802.3-c22";
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio2>;