diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index fc9ce6f1688c..6d21c0288e9e 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -54,8 +54,13 @@ PROPERTIES - compatible Usage: required Value type: - Definition: Must include "fsl,sec-v4.0". Also includes SEC - ERA versions (optional) with which the device is compatible. + Definition: Must include "fsl,sec-v4.0" + + - fsl,sec-era + Usage: optional + Value type: + Definition: A standard property. Define the 'ERA' of the SEC + device. - #address-cells Usage: required @@ -107,7 +112,8 @@ PROPERTIES EXAMPLE crypto@300000 { - compatible = "fsl,sec-v4.0", "fsl,sec-era-v2.0"; + compatible = "fsl,sec-v4.0"; + fsl,sec-era = <0x2>; #address-cells = <1>; #size-cells = <1>; reg = <0x300000 0x10000>; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt b/Documentation/devicetree/bindings/powerpc/fsl/guts.txt index 9e7a2417dac5..7f150b5012cc 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/guts.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/guts.txt @@ -17,9 +17,20 @@ Recommended properties: contains a functioning "reset control register" (i.e. the board is wired to reset upon setting the HRESET_REQ bit in this register). -Example: + - fsl,liodn-bits : Indicates the number of defined bits in the LIODN + registers, for those SOCs that have a PAMU device. + +Examples: global-utilities@e0000 { /* global utilities block */ compatible = "fsl,mpc8548-guts"; reg = ; fsl,has-rstcr; }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt new file mode 100644 index 000000000000..1f5e329f756c --- /dev/null +++ b/Documentation/devicetree/bindings/powerpc/fsl/pamu.txt @@ -0,0 +1,140 @@ +Freescale Peripheral Management Access Unit (PAMU) Device Tree Binding + +DESCRIPTION + +The PAMU is an I/O MMU that provides device-to-memory access control and +address translation capabilities. + +Required properties: + +- compatible : + First entry is a version-specific string, such as + "fsl,pamu-v1.0". The second is "fsl,pamu". +- ranges : + A standard property. Utilized to describe the memory mapped + I/O space utilized by the controller. The size should + be set to the total size of the register space of all + physically present PAMU controllers. For example, for + PAMU v1.0, on an SOC that has five PAMU devices, the size + is 0x5000. +- interrupts : + Interrupt mappings. The first tuple is the normal PAMU + interrupt, used for reporting access violations. The second + is for PAMU hardware errors, such as PAMU operation errors + and ECC errors. +- #address-cells: + A standard property. +- #size-cells : + A standard property. + +Optional properties: +- reg : + A standard property. It represents the CCSR registers of + all child PAMUs combined. Include it to provide support + for legacy drivers. +- interrupt-parent : + Phandle to interrupt controller + +Child nodes: + +Each child node represents one PAMU controller. Each SOC device that is +connected to a specific PAMU device should have a "fsl,pamu-phandle" property +that links to the corresponding specific child PAMU controller. + +- reg : + A standard property. Specifies the physical address and + length (relative to the parent 'ranges' property) of this + PAMU controller's configuration registers. The size should + be set to the size of this PAMU controllers's register space. + For PAMU v1.0, this size is 0x1000. +- fsl,primary-cache-geometry + : + Two cells that specify the geometry of the primary PAMU + cache. The first is the number of cache lines, and the + second is the number of "ways". For direct-mapped caches, + specify a value of 1. +- fsl,secondary-cache-geometry + : + Two cells that specify the geometry of the secondary PAMU + cache. The first is the number of cache lines, and the + second is the number of "ways". For direct-mapped caches, + specify a value of 1. + +Device nodes: + +Devices that have LIODNs need to specify links to the parent PAMU controller +(the actual PAMU controller that this device is connected to) and a pointer to +the LIODN register, if applicable. + +- fsl,iommu-parent + : + Phandle to the single, specific PAMU controller node to which + this device is connect. The PAMU topology is represented in + the device tree to assist code that dynamically determines the + best LIODN values to minimize PAMU cache thrashing. + +- fsl,liodn-reg : + Two cells that specify the location of the LIODN register + for this device. Required for devices that have a single + LIODN. The first cell is a phandle to a node that contains + the registers where the LIODN is to be set. The second is + the offset from the first "reg" resource of the node where + the specific LIODN register is located. + + +Example: + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x5000>; + ranges = <0 0x20000 0x5000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu4: pamu@4000 { + reg = <0x4000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + +/include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/bsc9131rdb.dtsi index 638adda2c218..9e6c01339ccc 100644 --- a/arch/powerpc/boot/dts/bsc9131rdb.dtsi +++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi @@ -126,7 +126,7 @@ }; }; - sdhci@2e000 { + sdhc@2e000 { status = "disabled"; }; diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi index 0bde9ee8afaf..af12ead88c5f 100644 --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -41,7 +41,7 @@ /* controller at 0x9000 */ &pci0 { - compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; @@ -69,7 +69,7 @@ /* controller at 0xa000 */ &pci1 { - compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2"; + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi index 06216b8c0af5..e179803a81ef 100644 --- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -45,7 +45,7 @@ /* controller at 0x9000 */ &pci0 { - compatible = "fsl,p1022-pcie"; + compatible = "fsl,mpc8548-pcie"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; @@ -73,7 +73,7 @@ /* controller at 0xa000 */ &pci1 { - compatible = "fsl,p1022-pcie"; + compatible = "fsl,mpc8548-pcie"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; @@ -102,7 +102,7 @@ /* controller at 0xb000 */ &pci2 { - compatible = "fsl,p1022-pcie"; + compatible = "fsl,mpc8548-pcie"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index 531eab82c6c9..69ac1acd4349 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -48,6 +48,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -75,6 +77,8 @@ bus-range = <0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -102,6 +106,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -125,18 +131,21 @@ interrupts = <16 2 1 11>; #address-cells = <2>; #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; ranges; port1 { #address-cells = <2>; #size-cells = <2>; cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ }; port2 { #address-cells = <2>; #size-cells = <2>; cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ }; }; @@ -246,10 +255,37 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; + reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; interrupts = < 24 2 0 0 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; }; /include/ "qoriq-mpic.dtsi" @@ -291,7 +327,17 @@ }; /include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + /include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + /include/ "qoriq-espi-0.dtsi" spi@110000 { fsl,espi-num-chipselects = <4>; @@ -299,6 +345,8 @@ /include/ "qoriq-esdhc-0.dtsi" sdhc@114000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ sdhci,auto-cmd12; }; @@ -308,20 +356,37 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" - usb0: usb@210000 { - compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - phy_type = "utmi"; - port0; - }; + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + phy_type = "utmi"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" - usb1: usb@211000 { - compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - dr_mode = "host"; - phy_type = "utmi"; - }; + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; /include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + /include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; + /include/ "qoriq-sec4.2-0.dtsi" +crypto: crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi index af4ebc8009e3..9b5a81a4529c 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -48,6 +48,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -75,6 +77,8 @@ bus-range = <0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -102,6 +106,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -152,18 +158,21 @@ interrupts = <16 2 1 11>; #address-cells = <2>; #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; ranges; port1 { #address-cells = <2>; #size-cells = <2>; cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ }; port2 { #address-cells = <2>; #size-cells = <2>; cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ }; }; @@ -273,10 +282,37 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; + reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; interrupts = < 24 2 0 0 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; }; /include/ "qoriq-mpic.dtsi" @@ -318,7 +354,17 @@ }; /include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + /include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + /include/ "qoriq-espi-0.dtsi" spi@110000 { fsl,espi-num-chipselects = <4>; @@ -326,6 +372,8 @@ /include/ "qoriq-esdhc-0.dtsi" sdhc@114000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ sdhci,auto-cmd12; }; @@ -335,20 +383,37 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" - usb0: usb@210000 { - compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph"; - phy_type = "utmi"; - port0; - }; + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph"; + phy_type = "utmi"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" - usb1: usb@211000 { - compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - dr_mode = "host"; - phy_type = "utmi"; - }; + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; /include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + /include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; + /include/ "qoriq-sec4.2-0.dtsi" +crypto: crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi index 4f9c9f682ecf..19859ad851eb 100644 --- a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -41,13 +41,15 @@ /* controller at 0x200000 */ &pci0 { - compatible = "fsl,p4080-pcie"; + compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -68,13 +70,15 @@ /* controller at 0x201000 */ &pci1 { - compatible = "fsl,p4080-pcie"; + compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; bus-range = <0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -95,13 +99,15 @@ /* controller at 0x202000 */ &pci2 { - compatible = "fsl,p4080-pcie"; + compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1"; device_type = "pci"; #size-cells = <2>; #address-cells = <3>; bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -126,18 +132,21 @@ #address-cells = <2>; #size-cells = <2>; fsl,srio-rmu-handle = <&rmu>; + fsl,iommu-parent = <&pamu0>; ranges; port1 { #address-cells = <2>; #size-cells = <2>; cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ }; port2 { #address-cells = <2>; #size-cells = <2>; cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ }; }; @@ -281,13 +290,51 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x5000>; + reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x5000>; + #address-cells = <1>; + #size-cells = <1>; interrupts = < 24 2 0 0 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu4: pamu@4000 { + reg = <0x4000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; }; /include/ "qoriq-rmu-0.dtsi" + rmu@d3000 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x540>; /* RMULIODNR */ + }; + /include/ "qoriq-mpic.dtsi" guts: global-utilities@e0000 { @@ -327,7 +374,17 @@ }; /include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + /include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + /include/ "qoriq-espi-0.dtsi" spi@110000 { fsl,espi-num-chipselects = <4>; @@ -335,6 +392,8 @@ /include/ "qoriq-esdhc-0.dtsi" sdhc@114000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ voltage-ranges = <3300 3300>; sdhci,auto-cmd12; }; @@ -347,11 +406,18 @@ /include/ "qoriq-usb2-mph-0.dtsi" usb@210000 { compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ port0; }; /include/ "qoriq-usb2-dr-0.dtsi" usb@211000 { compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ }; /include/ "qoriq-sec4.0-0.dtsi" +crypto: crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index 5d7205b7bb05..9ea77c3513f6 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -48,6 +48,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -75,6 +77,8 @@ bus-range = <0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -102,6 +106,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -129,6 +135,8 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 12>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x50c>; /* PEX4LIODNR */ pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -152,18 +160,21 @@ interrupts = <16 2 1 11>; #address-cells = <2>; #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; ranges; port1 { #address-cells = <2>; #size-cells = <2>; cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ }; port2 { #address-cells = <2>; #size-cells = <2>; cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ }; }; @@ -276,10 +287,37 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x4000>; + reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; interrupts = < 24 2 0 0 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; }; /include/ "qoriq-mpic.dtsi" @@ -321,7 +359,17 @@ }; /include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + /include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + /include/ "qoriq-espi-0.dtsi" spi@110000 { fsl,espi-num-chipselects = <4>; @@ -329,6 +377,8 @@ /include/ "qoriq-esdhc-0.dtsi" sdhc@114000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ sdhci,auto-cmd12; }; @@ -338,21 +388,41 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" - usb0: usb@210000 { - compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - phy_type = "utmi"; - port0; - }; + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" - usb1: usb@211000 { - compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - dr_mode = "host"; - phy_type = "utmi"; - }; + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; /include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + /include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; /include/ "qoriq-sec4.2-0.dtsi" + crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; + /include/ "qoriq-raid1.0-0.dtsi" + raideng@320000 { + fsl,iommu-parent = <&pamu1>; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi index db2c9a7b3a0e..97f8c26f9709 100644 --- a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi @@ -48,6 +48,7 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -75,6 +76,7 @@ bus-range = <0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -102,6 +104,7 @@ bus-range = <0x0 0xff>; clock-frequency = <33333333>; interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; pcie@0 { reg = <0 0 0 0 0>; #interrupt-cells = <1>; @@ -239,10 +242,42 @@ iommu@20000 { compatible = "fsl,pamu-v1.0", "fsl,pamu"; - reg = <0x20000 0x5000>; - interrupts = < - 24 2 0 0 - 16 2 1 30>; + reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x5000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <24 2 0 0 + 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu4: pamu@4000 { + reg = <0x4000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; }; /include/ "qoriq-mpic.dtsi" @@ -284,7 +319,17 @@ }; /include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + /include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + /include/ "qoriq-espi-0.dtsi" spi@110000 { fsl,espi-num-chipselects = <4>; @@ -292,6 +337,8 @@ /include/ "qoriq-esdhc-0.dtsi" sdhc@114000 { + fsl,iommu-parent = <&pamu2>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ sdhci,auto-cmd12; }; @@ -301,20 +348,37 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" - usb0: usb@210000 { - compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; - phy_type = "utmi"; - port0; - }; + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; /include/ "qoriq-usb2-dr-0.dtsi" - usb1: usb@211000 { - compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; - dr_mode = "host"; - phy_type = "utmi"; - }; + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; /include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + /include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; + /include/ "qoriq-sec5.2-0.dtsi" + crypto@300000 { + fsl,iommu-parent = <&pamu4>; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi index d4c9d5daab21..ffadcb563ada 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi @@ -36,6 +36,7 @@ crypto@30000 { compatible = "fsl,sec-v4.4", "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; + ranges = <0x0 0x30000 0x10000>; reg = <0x30000 0x10000>; interrupts = <58 2 0 0>; diff --git a/arch/powerpc/boot/dts/ppa8548.dts b/arch/powerpc/boot/dts/ppa8548.dts new file mode 100644 index 000000000000..f97eceed610a --- /dev/null +++ b/arch/powerpc/boot/dts/ppa8548.dts @@ -0,0 +1,166 @@ +/* + * PPA8548 Device Tree Source (36-bit address map) + * Copyright 2013 Prodrive B.V. + * + * Based on: + * MPC8548 CDS Device Tree Source (36-bit address map) + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8548si-pre.dtsi" + +/ { + model = "ppa8548"; + compatible = "ppa8548"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x40000000>; + }; + + lbc: localbus@fe0005000 { + reg = <0xf 0xe0005000 0 0x1000>; + ranges = <0x0 0x0 0xf 0xff800000 0x00800000>; + }; + + soc: soc8548@fe0000000 { + ranges = <0 0xf 0xe0000000 0x100000>; + }; + + pci0: pci@fe0008000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + pci1: pci@fe0009000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + pci2: pcie@fe000a000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + rio: rapidio@fe00c0000 { + reg = <0xf 0xe00c0000 0x0 0x11000>; + port1 { + ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>; + }; + }; +}; + +&lbc { + nor@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x00800000>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + reg = <0x0 0x7A0000>; + label = "user"; + }; + + partition@7A0000 { + reg = <0x7A0000 0x20000>; + label = "env"; + read-only; + }; + + partition@7C0000 { + reg = <0x7C0000 0x40000>; + label = "u-boot"; + read-only; + }; + }; +}; + +&soc { + i2c@3000 { + rtc@6f { + compatible = "intersil,isl1208"; + reg = <0x6f>; + }; + }; + + i2c@3100 { + }; + + /* + * Only ethernet controller @25000 and @26000 are used. + * Use alias enet2 and enet3 for the remainig controllers, + * to stay compatible with mpc8548si-pre.dtsi. + */ + enet2: ethernet@24000 { + status = "disabled"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <7 1 0 0>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupts = <8 1 0 0>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy0>; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy1>; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + status = "disabled"; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + crypto@30000 { + status = "disabled"; + }; +}; + +/include/ "fsl/mpc8548si-post.dtsi" diff --git a/arch/powerpc/boot/dts/sbc8548-altflash.dts b/arch/powerpc/boot/dts/sbc8548-altflash.dts new file mode 100644 index 000000000000..0b38a0defd2c --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8548-altflash.dts @@ -0,0 +1,115 @@ +/* + * SBC8548 Device Tree Source + * + * Configured for booting off the alternate (64MB SODIMM) flash. + * Requires switching JP12 jumpers and changing SW2.8 setting. + * + * Copyright 2013 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/dts-v1/; + +/include/ "sbc8548-pre.dtsi" + +/{ + localbus@e0000000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + reg = <0xe0000000 0x5000>; + interrupt-parent = <&mpic>; + + ranges = <0x0 0x0 0xfc000000 0x04000000 /*64MB Flash*/ + 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/ + 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/ + 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */ + 0x6 0x0 0xef800000 0x00800000>; /*8MB Flash*/ + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x04000000>; + compatible = "intel,JS28F128", "cfi-flash"; + bank-width = <4>; + device-width = <1>; + partition@0x0 { + label = "space"; + /* FC000000 -> FFEFFFFF */ + reg = <0x00000000 0x03f00000>; + }; + partition@0x03f00000 { + label = "bootloader"; + /* FFF00000 -> FFFFFFFF */ + reg = <0x03f00000 0x00100000>; + read-only; + }; + }; + + + epld@5,0 { + compatible = "wrs,epld-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x5 0x0 0x00b10000>; + ranges = < + 0x0 0x0 0x5 0x000000 0x1fff /* LED */ + 0x1 0x0 0x5 0x100000 0x1fff /* Switches */ + 0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */ + 0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */ + >; + + led@0,0 { + compatible = "led"; + reg = <0x0 0x0 0x1fff>; + }; + + switches@1,0 { + compatible = "switches"; + reg = <0x1 0x0 0x1fff>; + }; + + hw-rev@3,0 { + compatible = "hw-rev"; + reg = <0x3 0x0 0x1fff>; + }; + + eeprom@b,0 { + compatible = "eeprom"; + reg = <0xb 0 0x1fff>; + }; + + }; + + alt-flash@6,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,JS28F640", "cfi-flash"; + reg = <0x6 0x0 0x800000>; + bank-width = <1>; + device-width = <1>; + partition@0x0 { + label = "space"; + /* EF800000 -> EFF9FFFF */ + reg = <0x00000000 0x007a0000>; + }; + partition@0x7a0000 { + label = "bootloader"; + /* EFFA0000 -> EFFFFFFF */ + reg = <0x007a0000 0x00060000>; + read-only; + }; + }; + + + }; +}; + +/include/ "sbc8548-post.dtsi" diff --git a/arch/powerpc/boot/dts/sbc8548-post.dtsi b/arch/powerpc/boot/dts/sbc8548-post.dtsi new file mode 100644 index 000000000000..33a47e27a11e --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8548-post.dtsi @@ -0,0 +1,295 @@ +/* + * SBC8548 Device Tree Source + * + * Copyright 2007 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/{ + soc8548@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x00000000 0xe0000000 0x00100000>; + bus-frequency = <0>; + compatible = "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <0x12 0x2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <0x20>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <0x10 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <0x6 0x1>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1a { + interrupt-parent = <&mpic>; + interrupts = <0x7 0x1>; + reg = <0x1a>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x01 (PCI-X slot) @66MHz */ + 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>; + clock-frequency = <66000000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + }; + + pci1: pcie@e000a000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x0 (PEX) */ + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <0x1a 0x2>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>; + clock-frequency = <33000000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe000a000 0x1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x10000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/sbc8548-pre.dtsi b/arch/powerpc/boot/dts/sbc8548-pre.dtsi new file mode 100644 index 000000000000..d8c66290c5b4 --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8548-pre.dtsi @@ -0,0 +1,52 @@ +/* + * SBC8548 Device Tree Source + * + * Copyright 2007 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/{ + model = "SBC8548"; + compatible = "SBC8548"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + +}; diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 77be77116c2e..1df2a0955668 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -14,44 +14,9 @@ /dts-v1/; -/ { - model = "SBC8548"; - compatible = "SBC8548"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8548@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <0x20>; // 32 bytes - i-cache-line-size = <0x20>; // 32 bytes - d-cache-size = <0x8000>; // L1, 32K - i-cache-size = <0x8000>; // L1, 32K - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; - clock-frequency = <0>; - next-level-cache = <&L2>; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x10000000>; - }; +/include/ "sbc8548-pre.dtsi" +/{ localbus@e0000000 { #address-cells = <2>; #size-cells = <1>; @@ -63,23 +28,25 @@ 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/ 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/ 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */ - 0x6 0x0 0xfb800000 0x04000000>; /*64MB Flash*/ + 0x6 0x0 0xec000000 0x04000000>; /*64MB Flash*/ flash@0,0 { #address-cells = <1>; #size-cells = <1>; - compatible = "cfi-flash"; + compatible = "intel,JS28F640", "cfi-flash"; reg = <0x0 0x0 0x800000>; bank-width = <1>; device-width = <1>; partition@0x0 { label = "space"; - reg = <0x00000000 0x00100000>; + /* FF800000 -> FFF9FFFF */ + reg = <0x00000000 0x007a0000>; }; - partition@0x100000 { + partition@0x7a0000 { label = "bootloader"; - reg = <0x00100000 0x00700000>; + /* FFFA0000 -> FFFFFFFF */ + reg = <0x007a0000 0x00060000>; read-only; }; }; @@ -122,307 +89,22 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x6 0x0 0x04000000>; - compatible = "cfi-flash"; + compatible = "intel,JS28F128", "cfi-flash"; bank-width = <4>; device-width = <1>; partition@0x0 { - label = "bootloader"; - reg = <0x00000000 0x00100000>; - read-only; - }; - partition@0x00100000 { - label = "file-system"; - reg = <0x00100000 0x01f00000>; - }; - partition@0x02000000 { - label = "boot-config"; - reg = <0x02000000 0x00100000>; - }; - partition@0x02100000 { label = "space"; - reg = <0x02100000 0x01f00000>; + /* EC000000 -> EFEFFFFF */ + reg = <0x00000000 0x03f00000>; + }; + partition@0x03f00000 { + label = "bootloader"; + /* EFF00000 -> EFFFFFFF */ + reg = <0x03f00000 0x00100000>; + read-only; }; }; }; - - soc8548@e0000000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - ranges = <0x00000000 0xe0000000 0x00100000>; - bus-frequency = <0>; - compatible = "simple-bus"; - - ecm-law@0 { - compatible = "fsl,ecm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - ecm@1000 { - compatible = "fsl,mpc8548-ecm", "fsl,ecm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - memory-controller@2000 { - compatible = "fsl,mpc8548-memory-controller"; - reg = <0x2000 0x1000>; - interrupt-parent = <&mpic>; - interrupts = <0x12 0x2>; - }; - - L2: l2-cache-controller@20000 { - compatible = "fsl,mpc8548-l2-cache-controller"; - reg = <0x20000 0x1000>; - cache-line-size = <0x20>; // 32 bytes - cache-size = <0x80000>; // L2, 512K - interrupt-parent = <&mpic>; - interrupts = <0x10 0x2>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <0x2b 0x2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8548-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@19 { - interrupt-parent = <&mpic>; - interrupts = <0x6 0x1>; - reg = <0x19>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1a { - interrupt-parent = <&mpic>; - interrupts = <0x7 0x1>; - reg = <0x1a>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "eTSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <0x2a 0x2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; // reg base, size - clock-frequency = <0>; // should we fill in in uboot? - interrupts = <0x2a 0x2>; - interrupt-parent = <&mpic>; - }; - - global-utilities@e0000 { //global utilities reg - compatible = "fsl,mpc8548-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - - crypto@30000 { - compatible = "fsl,sec2.1", "fsl,sec2.0"; - reg = <0x30000 0x10000>; - interrupts = <45 2>; - interrupt-parent = <&mpic>; - fsl,num-channels = <4>; - fsl,channel-fifo-len = <24>; - fsl,exec-units-mask = <0xfe>; - fsl,descriptor-types-mask = <0x12b0ebf>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - }; - - pci0: pci@e0008000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x01 (PCI-X slot) @66MHz */ - 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1 - - /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */ - 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 - 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 - 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 - 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <0x18 0x2>; - bus-range = <0 0>; - ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>; - clock-frequency = <66000000>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008000 0x1000>; - compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; - device_type = "pci"; - }; - - pci1: pcie@e000a000 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x0 (PEX) */ - 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 - 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 - 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 - 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>; - - interrupt-parent = <&mpic>; - interrupts = <0x1a 0x2>; - bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>; - clock-frequency = <33000000>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe000a000 0x1000>; - compatible = "fsl,mpc8548-pcie"; - device_type = "pci"; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x02000000 0x0 0xa0000000 - 0x02000000 0x0 0xa0000000 - 0x0 0x10000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00800000>; - }; - }; }; + +/include/ "sbc8548-post.dtsi" diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig index a0dfef1fcdb7..e12e60c3b9a2 100644 --- a/arch/powerpc/configs/83xx/kmeter1_defconfig +++ b/arch/powerpc/configs/83xx/kmeter1_defconfig @@ -2,6 +2,8 @@ CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_EXPERT=y CONFIG_SLAB=y @@ -16,8 +18,6 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_PPC_PMAC is not set CONFIG_PPC_83xx=y CONFIG_KMETER1=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y # CONFIG_SECCOMP is not set CONFIG_NET=y @@ -45,7 +45,6 @@ CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_PHRAM=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y -CONFIG_MTD_UBI_DEBUG=y CONFIG_PROC_DEVICETREE=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y @@ -76,5 +75,4 @@ CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y diff --git a/arch/powerpc/configs/85xx/ppa8548_defconfig b/arch/powerpc/configs/85xx/ppa8548_defconfig new file mode 100644 index 000000000000..a11337de8aa2 --- /dev/null +++ b/arch/powerpc/configs/85xx/ppa8548_defconfig @@ -0,0 +1,65 @@ +CONFIG_PPC_85xx=y +CONFIG_PPA8548=y +CONFIG_DTC=y +CONFIG_DEFAULT_UIMAGE=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_PCI is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_ADVANCED_OPTIONS=y +CONFIG_LOWMEM_SIZE_BOOL=y +CONFIG_LOWMEM_SIZE=0x40000000 +CONFIG_LOWMEM_CAM_NUM_BOOL=y +CONFIG_LOWMEM_CAM_NUM=4 +CONFIG_PAGE_OFFSET_BOOL=y +CONFIG_PAGE_OFFSET=0xb0000000 +CONFIG_KERNEL_START_BOOL=y +CONFIG_KERNEL_START=0xb0000000 +# CONFIG_PHYSICAL_START_BOOL is not set +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x04000000 +CONFIG_TASK_SIZE_BOOL=y +CONFIG_TASK_SIZE=0xb0000000 + +CONFIG_FSL_LBC=y +CONFIG_FSL_DMA=y +CONFIG_FSL_RIO=y + +CONFIG_RAPIDIO=y +CONFIG_RAPIDIO_DMA_ENGINE=y +CONFIG_RAPIDIO_TSI57X=y +CONFIG_RAPIDIO_TSI568=y +CONFIG_RAPIDIO_CPS_XX=y +CONFIG_RAPIDIO_CPS_GEN2=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_PROC_DEVICETREE=y + +CONFIG_MTD=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_PHYSMAP_OF=y + +CONFIG_I2C=y +CONFIG_I2C_MPC=y +CONFIG_I2C_CHARDEV +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_DRV_ISL1208=y + +CONFIG_NET=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_GIANFAR=y +CONFIG_MARVELL_PHY=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 5b2b651dfb98..008a7a47b89b 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -55,3 +55,22 @@ CONFIG_ROOT_NFS=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +CONFIG_MTD_CFI_I4=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_PHYSMAP_OF=y diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c index 35f14fda108a..c7f47cfa9c29 100644 --- a/arch/powerpc/platforms/512x/mpc512x_shared.c +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -68,10 +68,6 @@ struct fsl_diu_shared_fb { bool in_use; }; -void mpc512x_set_monitor_port(enum fsl_diu_monitor_port port) -{ -} - #define DIU_DIV_MASK 0x000000ff void mpc512x_set_pixel_clock(unsigned int pixclock) { @@ -303,7 +299,6 @@ void __init mpc512x_setup_diu(void) } } - diu_ops.set_monitor_port = mpc512x_set_monitor_port; diu_ops.set_pixel_clock = mpc512x_set_pixel_clock; diu_ops.valid_monitor_port = mpc512x_valid_monitor_port; diu_ops.release_bootmem = mpc512x_release_bootmem; diff --git a/arch/powerpc/platforms/82xx/km82xx.c b/arch/powerpc/platforms/82xx/km82xx.c index cf964e19573a..058cc1895c88 100644 --- a/arch/powerpc/platforms/82xx/km82xx.c +++ b/arch/powerpc/platforms/82xx/km82xx.c @@ -18,11 +18,11 @@ #include #include -#include +#include #include #include #include -#include +#include #include #include @@ -36,7 +36,7 @@ static void __init km82xx_pic_init(void) struct device_node *np = of_find_compatible_node(NULL, NULL, "fsl,pq2-pic"); if (!np) { - printk(KERN_ERR "PIC init: can not find cpm-pic node\n"); + pr_err("PIC init: can not find cpm-pic node\n"); return; } diff --git a/arch/powerpc/platforms/83xx/km83xx.c b/arch/powerpc/platforms/83xx/km83xx.c index 89923d723349..bf4c4473abb9 100644 --- a/arch/powerpc/platforms/83xx/km83xx.c +++ b/arch/powerpc/platforms/83xx/km83xx.c @@ -28,8 +28,8 @@ #include #include -#include -#include +#include +#include #include #include #include @@ -43,6 +43,82 @@ #include "mpc83xx.h" #define SVR_REV(svr) (((svr) >> 0) & 0xFFFF) /* Revision field */ + +static void quirk_mpc8360e_qe_enet10(void) +{ + /* + * handle mpc8360E Erratum QE_ENET10: + * RGMII AC values do not meet the specification + */ + uint svid = mfspr(SPRN_SVR); + struct device_node *np_par; + struct resource res; + void __iomem *base; + int ret; + + np_par = of_find_node_by_name(NULL, "par_io"); + if (np_par == NULL) { + pr_warn("%s couldn;t find par_io node\n", __func__); + return; + } + /* Map Parallel I/O ports registers */ + ret = of_address_to_resource(np_par, 0, &res); + if (ret) { + pr_warn("%s couldn;t map par_io registers\n", __func__); + return; + } + + base = ioremap(res.start, res.end - res.start + 1); + + /* + * set output delay adjustments to default values according + * table 5 in Errata Rev. 5, 9/2011: + * + * write 0b01 to UCC1 bits 18:19 + * write 0b01 to UCC2 option 1 bits 4:5 + * write 0b01 to UCC2 option 2 bits 16:17 + */ + clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000); + + /* + * set output delay adjustments to default values according + * table 3-13 in Reference Manual Rev.3 05/2010: + * + * write 0b01 to UCC2 option 2 bits 16:17 + * write 0b0101 to UCC1 bits 20:23 + * write 0b0101 to UCC2 option 1 bits 24:27 + */ + clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550); + + if (SVR_REV(svid) == 0x0021) { + /* + * UCC2 option 1: write 0b1010 to bits 24:27 + * at address IMMRBAR+0x14AC + */ + clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0); + } else if (SVR_REV(svid) == 0x0020) { + /* + * UCC1: write 0b11 to bits 18:19 + * at address IMMRBAR+0x14A8 + */ + setbits32((base + 0xa8), 0x00003000); + + /* + * UCC2 option 1: write 0b11 to bits 4:5 + * at address IMMRBAR+0x14A8 + */ + setbits32((base + 0xa8), 0x0c000000); + + /* + * UCC2 option 2: write 0b11 to bits 16:17 + * at address IMMRBAR+0x14AC + */ + setbits32((base + 0xac), 0x0000c000); + } + iounmap(base); + of_node_put(np_par); +} + /* ************************************************************************ * * Setup the architecture @@ -72,84 +148,13 @@ static void __init mpc83xx_km_setup_arch(void) for_each_node_by_name(np, "ucc") par_io_of_config(np); - } - np = of_find_compatible_node(NULL, "network", "ucc_geth"); - if (np != NULL) { - /* - * handle mpc8360E Erratum QE_ENET10: - * RGMII AC values do not meet the specification - */ - uint svid = mfspr(SPRN_SVR); - struct device_node *np_par; - struct resource res; - void __iomem *base; - int ret; - - np_par = of_find_node_by_name(NULL, "par_io"); - if (np_par == NULL) { - printk(KERN_WARNING "%s couldn;t find par_io node\n", - __func__); - return; + /* Only apply this quirk when par_io is available */ + np = of_find_compatible_node(NULL, "network", "ucc_geth"); + if (np != NULL) { + quirk_mpc8360e_qe_enet10(); + of_node_put(np); } - /* Map Parallel I/O ports registers */ - ret = of_address_to_resource(np_par, 0, &res); - if (ret) { - printk(KERN_WARNING "%s couldn;t map par_io registers\n", - __func__); - return; - } - - base = ioremap(res.start, res.end - res.start + 1); - - /* - * set output delay adjustments to default values according - * table 5 in Errata Rev. 5, 9/2011: - * - * write 0b01 to UCC1 bits 18:19 - * write 0b01 to UCC2 option 1 bits 4:5 - * write 0b01 to UCC2 option 2 bits 16:17 - */ - clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000); - - /* - * set output delay adjustments to default values according - * table 3-13 in Reference Manual Rev.3 05/2010: - * - * write 0b01 to UCC2 option 2 bits 16:17 - * write 0b0101 to UCC1 bits 20:23 - * write 0b0101 to UCC2 option 1 bits 24:27 - */ - clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550); - - if (SVR_REV(svid) == 0x0021) { - /* - * UCC2 option 1: write 0b1010 to bits 24:27 - * at address IMMRBAR+0x14AC - */ - clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0); - } else if (SVR_REV(svid) == 0x0020) { - /* - * UCC1: write 0b11 to bits 18:19 - * at address IMMRBAR+0x14A8 - */ - setbits32((base + 0xa8), 0x00003000); - - /* - * UCC2 option 1: write 0b11 to bits 4:5 - * at address IMMRBAR+0x14A8 - */ - setbits32((base + 0xa8), 0x0c000000); - - /* - * UCC2 option 2: write 0b11 to bits 16:17 - * at address IMMRBAR+0x14AC - */ - setbits32((base + 0xac), 0x0000c000); - } - iounmap(base); - of_node_put(np_par); - of_node_put(np); } #endif /* CONFIG_QUICC_ENGINE */ } diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 651788cbc6e6..bcc53aa09bf7 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -191,6 +191,13 @@ config SBC8548 help This option enables support for the Wind River SBC8548 board +config PPA8548 + bool "Prodrive PPA8548" + help + This option enables support for the Prodrive PPA8548 board. + select DEFAULT_UIMAGE + select HAS_RAPIDIO + config GE_IMP3A bool "GE Intelligent Platforms IMP3A" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 9db31dcbd320..07d0dbb141c0 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_P5040_DS) += p5040_ds.o corenet_ds.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o obj-$(CONFIG_SBC8548) += sbc8548.o +obj-$(CONFIG_PPA8548) += ppa8548.o obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o obj-$(CONFIG_KSI8560) += ksi8560.o obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index bd12588fa252..a7b3621a8df5 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -206,9 +206,7 @@ static void __init mpc85xx_mds_reset_ucc_phys(void) setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); - for (np = NULL; (np = of_find_compatible_node(np, - "network", - "ucc_geth")) != NULL;) { + for_each_compatible_node(np, "network", "ucc_geth") { const unsigned int *prop; int ucc_num; diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index 7328b8d74129..c3e47144d0e4 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -106,42 +106,6 @@ (c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \ (c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT)) -/** - * p1022ds_get_pixel_format: return the Area Descriptor for a given pixel depth - * - * The Area Descriptor is a 32-bit value that determine which bits in each - * pixel are to be used for each color. - */ -static u32 p1022ds_get_pixel_format(enum fsl_diu_monitor_port port, - unsigned int bits_per_pixel) -{ - switch (bits_per_pixel) { - case 32: - /* 0x88883316 */ - return MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8); - case 24: - /* 0x88082219 */ - return MAKE_AD(4, 0, 1, 2, 2, 0, 8, 8, 8); - case 16: - /* 0x65053118 */ - return MAKE_AD(4, 2, 1, 0, 1, 5, 6, 5, 0); - default: - pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel); - return 0; - } -} - -/** - * p1022ds_set_gamma_table: update the gamma table, if necessary - * - * On some boards, the gamma table for some ports may need to be modified. - * This is not the case on the P1022DS, so we do nothing. -*/ -static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port, - char *gamma_table_base) -{ -} - struct fsl_law { u32 lawbar; u32 reserved1; @@ -302,7 +266,7 @@ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) goto exit; } cs1_addr = lbc_br_to_phys(ecm, num_laws, br1); - if (!cs0_addr) { + if (!cs1_addr) { pr_err("p1022ds: could not determine physical address for CS1" " (BR1=%08x)\n", br1); goto exit; @@ -510,8 +474,6 @@ static void __init p1022_ds_setup_arch(void) ppc_md.progress("p1022_ds_setup_arch()", 0); #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) - diu_ops.get_pixel_format = p1022ds_get_pixel_format; - diu_ops.set_gamma_table = p1022ds_set_gamma_table; diu_ops.set_monitor_port = p1022ds_set_monitor_port; diu_ops.set_pixel_clock = p1022ds_set_pixel_clock; diu_ops.valid_monitor_port = p1022ds_valid_monitor_port; diff --git a/arch/powerpc/platforms/85xx/p1022_rdk.c b/arch/powerpc/platforms/85xx/p1022_rdk.c index 55ffa1cc380c..8c9297112b30 100644 --- a/arch/powerpc/platforms/85xx/p1022_rdk.c +++ b/arch/powerpc/platforms/85xx/p1022_rdk.c @@ -34,17 +34,6 @@ #define CLKDVDR_PXCKDLY 0x06000000 #define CLKDVDR_PXCLK_MASK 0x00FF0000 -/** - * p1022rdk_set_monitor_port: switch the output to a different monitor port - */ -static void p1022rdk_set_monitor_port(enum fsl_diu_monitor_port port) -{ - if (port != FSL_DIU_PORT_DVI) { - pr_err("p1022rdk: unsupported monitor port %i\n", port); - return; - } -} - /** * p1022rdk_set_pixel_clock: program the DIU's clock * @@ -124,7 +113,6 @@ static void __init p1022_rdk_setup_arch(void) ppc_md.progress("p1022_rdk_setup_arch()", 0); #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) - diu_ops.set_monitor_port = p1022rdk_set_monitor_port; diu_ops.set_pixel_clock = p1022rdk_set_pixel_clock; diu_ops.valid_monitor_port = p1022rdk_valid_monitor_port; #endif diff --git a/arch/powerpc/platforms/85xx/ppa8548.c b/arch/powerpc/platforms/85xx/ppa8548.c new file mode 100644 index 000000000000..6a7704b92c3b --- /dev/null +++ b/arch/powerpc/platforms/85xx/ppa8548.c @@ -0,0 +1,98 @@ +/* + * ppa8548 setup and early boot code. + * + * Copyright 2009 Prodrive B.V.. + * + * By Stef van Os (see MAINTAINERS for contact information) + * + * Based on the SBC8548 support - Copyright 2007 Wind River Systems Inc. + * Based on the MPC8548CDS support - Copyright 2005 Freescale Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +static void __init ppa8548_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, + 0, 256, " OpenPIC "); + BUG_ON(mpic == NULL); + mpic_init(mpic); +} + +/* + * Setup the architecture + */ +static void __init ppa8548_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("ppa8548_setup_arch()", 0); +} + +static void ppa8548_show_cpuinfo(struct seq_file *m) +{ + uint32_t svid, phid1; + + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Prodrive B.V.\n"); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); +} + +static struct of_device_id __initdata of_bus_ids[] = { + { .name = "soc", }, + { .type = "soc", }, + { .compatible = "simple-bus", }, + { .compatible = "gianfar", }, + { .compatible = "fsl,srio", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(ppa8548, declare_of_platform_devices); + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init ppa8548_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "ppa8548"); +} + +define_machine(ppa8548) { + .name = "ppa8548", + .probe = ppa8548_probe, + .setup_arch = ppa8548_setup_arch, + .init_IRQ = ppa8548_pic_init, + .show_cpuinfo = ppa8548_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/qemu_e500.c b/arch/powerpc/platforms/85xx/qemu_e500.c index f6ea5618c733..5cefc5a9a144 100644 --- a/arch/powerpc/platforms/85xx/qemu_e500.c +++ b/arch/powerpc/platforms/85xx/qemu_e500.c @@ -29,9 +29,10 @@ void __init qemu_e500_pic_init(void) { struct mpic *mpic; + unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU | + MPIC_ENABLE_COREINT; - mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, - 0, 256, " OpenPIC "); + mpic = mpic_alloc(NULL, 0, flags, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -66,7 +67,7 @@ define_machine(qemu_e500) { #ifdef CONFIG_PCI .pcibios_fixup_bus = fsl_pcibios_fixup_bus, #endif - .get_irq = mpic_get_irq, + .get_irq = mpic_get_coreint_irq, .restart = fsl_rstcr_restart, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, diff --git a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c index 8cf93f029e17..afc2dbf37011 100644 --- a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c +++ b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c @@ -203,6 +203,7 @@ static struct of_device_id mpc85xx_l2ctlr_of_match[] = { { .compatible = "fsl,p1024-l2-cache-controller",}, { .compatible = "fsl,p1015-l2-cache-controller",}, { .compatible = "fsl,p1010-l2-cache-controller",}, + { .compatible = "fsl,bsc9131-l2-cache-controller",}, {}, }; diff --git a/arch/powerpc/sysdev/fsl_ifc.c b/arch/powerpc/sysdev/fsl_ifc.c index 2a36fd6a9583..d7fc72239144 100644 --- a/arch/powerpc/sysdev/fsl_ifc.c +++ b/arch/powerpc/sysdev/fsl_ifc.c @@ -63,7 +63,7 @@ int fsl_ifc_find(phys_addr_t addr_base) return -ENODEV; for (i = 0; i < ARRAY_SIZE(fsl_ifc_ctrl_dev->regs->cspr_cs); i++) { - __be32 cspr = in_be32(&fsl_ifc_ctrl_dev->regs->cspr_cs[i].cspr); + u32 cspr = in_be32(&fsl_ifc_ctrl_dev->regs->cspr_cs[i].cspr); if (cspr & CSPR_V && (cspr & CSPR_BA) == convert_ifc_address(addr_base)) return i; diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index 300be2d06a26..6bc5a546d49f 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -74,8 +74,8 @@ int fsl_lbc_find(phys_addr_t addr_base) lbc = fsl_lbc_ctrl_dev->regs; for (i = 0; i < ARRAY_SIZE(lbc->bank); i++) { - __be32 br = in_be32(&lbc->bank[i].br); - __be32 or = in_be32(&lbc->bank[i].or); + u32 br = in_be32(&lbc->bank[i].br); + u32 or = in_be32(&lbc->bank[i].or); if (br & BR_V && (br & or & BR_BA) == fsl_lbc_addr(addr_base)) return i; @@ -97,7 +97,7 @@ EXPORT_SYMBOL(fsl_lbc_find); int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm) { int bank; - __be32 br; + u32 br; struct fsl_lbc_regs __iomem *lbc; bank = fsl_lbc_find(addr_base); diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index 6e53d97abd3f..178c99427b1c 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -28,7 +28,7 @@ #include "fsl_msi.h" #include "fsl_pci.h" -LIST_HEAD(msi_head); +static LIST_HEAD(msi_head); struct fsl_msi_feature { u32 fsl_pic_ip; @@ -130,7 +130,7 @@ static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq, struct pci_controller *hose = pci_bus_to_host(pdev->bus); u64 address; /* Physical address of the MSIIR */ int len; - const u64 *reg; + const __be64 *reg; /* If the msi-address-64 property exists, then use it */ reg = of_get_property(hose->dn, "msi-address-64", &len); diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 92a5915b1827..682084dba19b 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -421,13 +421,16 @@ void fsl_pcibios_fixup_bus(struct pci_bus *bus) } } -int __init fsl_add_bridge(struct device_node *dev, int is_primary) +int __init fsl_add_bridge(struct platform_device *pdev, int is_primary) { int len; struct pci_controller *hose; struct resource rsrc; const int *bus_range; u8 hdr_type, progif; + struct device_node *dev; + + dev = pdev->dev.of_node; if (!of_device_is_available(dev)) { pr_warning("%s: disabled\n", dev->full_name); @@ -453,6 +456,8 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary) if (!hose) return -ENOMEM; + /* set platform device as the parent */ + hose->parent = &pdev->dev; hose->first_busno = bus_range ? bus_range[0] : 0x0; hose->last_busno = bus_range ? bus_range[1] : 0xff; @@ -827,13 +832,18 @@ static const struct of_device_id pci_ids[] = { { .compatible = "fsl,mpc8548-pcie", }, { .compatible = "fsl,mpc8610-pci", }, { .compatible = "fsl,mpc8641-pcie", }, - { .compatible = "fsl,p1022-pcie", }, - { .compatible = "fsl,p1010-pcie", }, - { .compatible = "fsl,p1023-pcie", }, - { .compatible = "fsl,p4080-pcie", }, - { .compatible = "fsl,qoriq-pcie-v2.4", }, - { .compatible = "fsl,qoriq-pcie-v2.3", }, + { .compatible = "fsl,qoriq-pcie-v2.1", }, { .compatible = "fsl,qoriq-pcie-v2.2", }, + { .compatible = "fsl,qoriq-pcie-v2.3", }, + { .compatible = "fsl,qoriq-pcie-v2.4", }, + + /* + * The following entries are for compatibility with older device + * trees. + */ + { .compatible = "fsl,p1022-pcie", }, + { .compatible = "fsl,p4080-pcie", }, + {}, }; @@ -880,7 +890,7 @@ static int fsl_pci_probe(struct platform_device *pdev) #endif node = pdev->dev.of_node; - ret = fsl_add_bridge(node, fsl_pci_primary == node); + ret = fsl_add_bridge(pdev, fsl_pci_primary == node); #ifdef CONFIG_SWIOTLB if (ret == 0) { diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h index d078537adece..c495c00c8740 100644 --- a/arch/powerpc/sysdev/fsl_pci.h +++ b/arch/powerpc/sysdev/fsl_pci.h @@ -91,7 +91,7 @@ struct ccsr_pci { __be32 pex_err_cap_r3; /* 0x.e34 - PCIE error capture register 0 */ }; -extern int fsl_add_bridge(struct device_node *dev, int is_primary); +extern int fsl_add_bridge(struct platform_device *pdev, int is_primary); extern void fsl_pcibios_fixup_bus(struct pci_bus *bus); extern int mpc83xx_add_bridge(struct device_node *dev); u64 fsl_pci_immrbar_base(struct pci_controller *hose); diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 97118dc3d285..228cf91b91c1 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -58,10 +58,10 @@ phys_addr_t get_immrbase(void) if (soc) { int size; u32 naddr; - const u32 *prop = of_get_property(soc, "#address-cells", &size); + const __be32 *prop = of_get_property(soc, "#address-cells", &size); if (prop && size == 4) - naddr = *prop; + naddr = be32_to_cpup(prop); else naddr = 2; diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 66944255520d..d30e6a676c89 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1182,6 +1182,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, const char *vers; const u32 *psrc; u32 last_irq; + u32 fsl_version = 0; /* Default MPIC search parameters */ static const struct of_device_id __initconst mpic_device_id[] = { @@ -1314,7 +1315,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic_map(mpic, mpic->paddr, &mpic->tmregs, MPIC_INFO(TIMER_BASE), 0x1000); if (mpic->flags & MPIC_FSL) { - u32 brr1, version; + u32 brr1; int ret; /* @@ -1327,7 +1328,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, brr1 = _mpic_read(mpic->reg_type, &mpic->thiscpuregs, MPIC_FSL_BRR1); - version = brr1 & MPIC_FSL_BRR1_VER; + fsl_version = brr1 & MPIC_FSL_BRR1_VER; /* Error interrupt mask register (EIMR) is required for * handling individual device error interrupts. EIMR @@ -1342,11 +1343,30 @@ struct mpic * __init mpic_alloc(struct device_node *node, * is the number of vectors which have been consumed by * ipis and timer interrupts. */ - if (version >= 0x401) { + if (fsl_version >= 0x401) { ret = mpic_setup_error_int(mpic, intvec_top - 12); if (ret) return NULL; } + + } + + /* + * EPR is only available starting with v4.0. To support + * platforms that don't know the MPIC version at compile-time, + * such as qemu-e500, turn off coreint if this MPIC doesn't + * support it. Note that we never enable it if it wasn't + * requested in the first place. + * + * This is done outside the MPIC_FSL check, so that we + * also disable coreint if the MPIC node doesn't have + * an "fsl,mpic" compatible at all. This will be the case + * with device trees generated by older versions of QEMU. + * fsl_version will be zero if MPIC_FSL is not set. + */ + if (fsl_version < 0x400 && (flags & MPIC_ENABLE_COREINT)) { + WARN_ON(ppc_md.get_irq != mpic_get_coreint_irq); + ppc_md.get_irq = mpic_get_irq; } /* Reset */