UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

xilinx_spi: Switch to iomem functions and support little endian. 

This patch changes the out_(be)(8|16|32) and in_(be)(8|16|32) calls to 32 bits ioread/iowrite.

The read and write function are attached to the internal struct as callbacks, callback
is selected depending on endianess.

This will also build on platforms not supporting the in/out calls for instance x86.

Acked-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: John Linn <John.Linn@xilinx.com>
Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This commit is contained in:
Richard Röjfors 2009-11-13 12:28:49 +01:00 committed by Grant Likely
parent d5af91a1fa
commit 86fc593599
3 changed files with 57 additions and 43 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/spi/Kconfig
View File

@ -244,7 +244,7 @@ config SPI_TXX9
config SPI_XILINX
tristate "Xilinx SPI controller"
depends on EXPERIMENTAL
depends on HAS_IOMEM && EXPERIMENTAL
select SPI_BITBANG
select SPI_XILINX_OF if (XILINX_VIRTEX || MICROBLAZE)
help

96
drivers/spi/xilinx_spi.c
View File

@ -27,7 +27,7 @@
/* Register definitions as per "OPB Serial Peripheral Interface (SPI) (v1.00e)
* Product Specification", DS464
*/
#define XSPI_CR_OFFSET 0x62 /* 16-bit Control Register */
#define XSPI_CR_OFFSET 0x60 /* 16-bit Control Register */
#define XSPI_CR_ENABLE 0x02
#define XSPI_CR_MASTER_MODE 0x04
@ -39,7 +39,7 @@
#define XSPI_CR_MANUAL_SSELECT 0x80
#define XSPI_CR_TRANS_INHIBIT 0x100
#define XSPI_SR_OFFSET 0x67 /* 8-bit Status Register */
#define XSPI_SR_OFFSET 0x64 /* 8-bit Status Register */
#define XSPI_SR_RX_EMPTY_MASK 0x01 /* Receive FIFO is empty */
#define XSPI_SR_RX_FULL_MASK 0x02 /* Receive FIFO is full */
@ -47,8 +47,8 @@
#define XSPI_SR_TX_FULL_MASK 0x08 /* Transmit FIFO is full */
#define XSPI_SR_MODE_FAULT_MASK 0x10 /* Mode fault error */
#define XSPI_TXD_OFFSET 0x6b /* 8-bit Data Transmit Register */
#define XSPI_RXD_OFFSET 0x6f /* 8-bit Data Receive Register */
#define XSPI_TXD_OFFSET 0x68 /* 8-bit Data Transmit Register */
#define XSPI_RXD_OFFSET 0x6c /* 8-bit Data Receive Register */
#define XSPI_SSR_OFFSET 0x70 /* 32-bit Slave Select Register */
@ -86,25 +86,29 @@ struct xilinx_spi {
u8 *rx_ptr; /* pointer in the Tx buffer */
const u8 *tx_ptr; /* pointer in the Rx buffer */
int remaining_bytes; /* the number of bytes left to transfer */
unsigned int (*read_fn) (void __iomem *);
void (*write_fn) (u32, void __iomem *);
};
static void xspi_init_hw(void __iomem *regs_base)
static void xspi_init_hw(struct xilinx_spi *xspi)
{
void __iomem *regs_base = xspi->regs;
/* Reset the SPI device */
out_be32(regs_base + XIPIF_V123B_RESETR_OFFSET,
XIPIF_V123B_RESET_MASK);
xspi->write_fn(XIPIF_V123B_RESET_MASK,
regs_base + XIPIF_V123B_RESETR_OFFSET);
/* Disable all the interrupts just in case */
out_be32(regs_base + XIPIF_V123B_IIER_OFFSET, 0);
xspi->write_fn(0, regs_base + XIPIF_V123B_IIER_OFFSET);
/* Enable the global IPIF interrupt */
out_be32(regs_base + XIPIF_V123B_DGIER_OFFSET,
XIPIF_V123B_GINTR_ENABLE);
xspi->write_fn(XIPIF_V123B_GINTR_ENABLE,
regs_base + XIPIF_V123B_DGIER_OFFSET);
/* Deselect the slave on the SPI bus */
out_be32(regs_base + XSPI_SSR_OFFSET, 0xffff);
xspi->write_fn(0xffff, regs_base + XSPI_SSR_OFFSET);
/* Disable the transmitter, enable Manual Slave Select Assertion,
* put SPI controller into master mode, and enable it */
out_be16(regs_base + XSPI_CR_OFFSET,
XSPI_CR_TRANS_INHIBIT | XSPI_CR_MANUAL_SSELECT
| XSPI_CR_MASTER_MODE | XSPI_CR_ENABLE);
xspi->write_fn(XSPI_CR_TRANS_INHIBIT | XSPI_CR_MANUAL_SSELECT |
XSPI_CR_MASTER_MODE | XSPI_CR_ENABLE,
regs_base + XSPI_CR_OFFSET);
}
static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
@ -113,16 +117,16 @@ static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
if (is_on == BITBANG_CS_INACTIVE) {
/* Deselect the slave on the SPI bus */
out_be32(xspi->regs + XSPI_SSR_OFFSET, 0xffff);
xspi->write_fn(0xffff, xspi->regs + XSPI_SSR_OFFSET);
} else if (is_on == BITBANG_CS_ACTIVE) {
/* Set the SPI clock phase and polarity */
u16 cr = in_be16(xspi->regs + XSPI_CR_OFFSET)
u16 cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET)
& ~XSPI_CR_MODE_MASK;
if (spi->mode & SPI_CPHA)
cr |= XSPI_CR_CPHA;
if (spi->mode & SPI_CPOL)
cr |= XSPI_CR_CPOL;
out_be16(xspi->regs + XSPI_CR_OFFSET, cr);
xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
/* We do not check spi->max_speed_hz here as the SPI clock
* frequency is not software programmable (the IP block design
@ -130,8 +134,8 @@ static void xilinx_spi_chipselect(struct spi_device *spi, int is_on)
*/
/* Activate the chip select */
out_be32(xspi->regs + XSPI_SSR_OFFSET,
~(0x0001 << spi->chip_select));
xspi->write_fn(~(0x0001 << spi->chip_select),
xspi->regs + XSPI_SSR_OFFSET);
}
}
@ -178,15 +182,15 @@ static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi)
u8 sr;
/* Fill the Tx FIFO with as many bytes as possible */
sr = in_8(xspi->regs + XSPI_SR_OFFSET);
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
while ((sr & XSPI_SR_TX_FULL_MASK) == 0 && xspi->remaining_bytes > 0) {
if (xspi->tx_ptr) {
out_8(xspi->regs + XSPI_TXD_OFFSET, *xspi->tx_ptr++);
} else {
out_8(xspi->regs + XSPI_TXD_OFFSET, 0);
}
if (xspi->tx_ptr)
xspi->write_fn(*xspi->tx_ptr++,
xspi->regs + XSPI_TXD_OFFSET);
else
xspi->write_fn(0, xspi->regs + XSPI_TXD_OFFSET);
xspi->remaining_bytes--;
sr = in_8(xspi->regs + XSPI_SR_OFFSET);
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
}
}
@ -208,18 +212,19 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
/* Enable the transmit empty interrupt, which we use to determine
* progress on the transmission.
*/
ipif_ier = in_be32(xspi->regs + XIPIF_V123B_IIER_OFFSET);
out_be32(xspi->regs + XIPIF_V123B_IIER_OFFSET,
ipif_ier | XSPI_INTR_TX_EMPTY);
ipif_ier = xspi->read_fn(xspi->regs + XIPIF_V123B_IIER_OFFSET);
xspi->write_fn(ipif_ier | XSPI_INTR_TX_EMPTY,
xspi->regs + XIPIF_V123B_IIER_OFFSET);
/* Start the transfer by not inhibiting the transmitter any longer */
cr = in_be16(xspi->regs + XSPI_CR_OFFSET) & ~XSPI_CR_TRANS_INHIBIT;
out_be16(xspi->regs + XSPI_CR_OFFSET, cr);
cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET) &
~XSPI_CR_TRANS_INHIBIT;
xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
wait_for_completion(&xspi->done);
/* Disable the transmit empty interrupt */
out_be32(xspi->regs + XIPIF_V123B_IIER_OFFSET, ipif_ier);
xspi->write_fn(ipif_ier, xspi->regs + XIPIF_V123B_IIER_OFFSET);
return t->len - xspi->remaining_bytes;
}
@ -236,8 +241,8 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
u32 ipif_isr;
/* Get the IPIF interrupts, and clear them immediately */
ipif_isr = in_be32(xspi->regs + XIPIF_V123B_IISR_OFFSET);
out_be32(xspi->regs + XIPIF_V123B_IISR_OFFSET, ipif_isr);
ipif_isr = xspi->read_fn(xspi->regs + XIPIF_V123B_IISR_OFFSET);
xspi->write_fn(ipif_isr, xspi->regs + XIPIF_V123B_IISR_OFFSET);
if (ipif_isr & XSPI_INTR_TX_EMPTY) { /* Transmission completed */
u16 cr;
@ -248,20 +253,20 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
* transmitter while the Isr refills the transmit register/FIFO,
* or make sure it is stopped if we're done.
*/
cr = in_be16(xspi->regs + XSPI_CR_OFFSET);
out_be16(xspi->regs + XSPI_CR_OFFSET,
cr | XSPI_CR_TRANS_INHIBIT);
cr = xspi->read_fn(xspi->regs + XSPI_CR_OFFSET);
xspi->write_fn(cr | XSPI_CR_TRANS_INHIBIT,
xspi->regs + XSPI_CR_OFFSET);
/* Read out all the data from the Rx FIFO */
sr = in_8(xspi->regs + XSPI_SR_OFFSET);
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
while ((sr & XSPI_SR_RX_EMPTY_MASK) == 0) {
u8 data;
data = in_8(xspi->regs + XSPI_RXD_OFFSET);
data = xspi->read_fn(xspi->regs + XSPI_RXD_OFFSET);
if (xspi->rx_ptr) {
*xspi->rx_ptr++ = data;
}
sr = in_8(xspi->regs + XSPI_SR_OFFSET);
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
}
/* See if there is more data to send */
@ -270,7 +275,7 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
/* Start the transfer by not inhibiting the
* transmitter any longer
*/
out_be16(xspi->regs + XSPI_CR_OFFSET, cr);
xspi->write_fn(cr, xspi->regs + XSPI_CR_OFFSET);
} else {
/* No more data to send.
* Indicate the transfer is completed.
@ -325,9 +330,16 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
xspi->mem = *mem;
xspi->irq = irq;
if (pdata->little_endian) {
xspi->read_fn = ioread32;
xspi->write_fn = iowrite32;
} else {
xspi->read_fn = ioread32be;
xspi->write_fn = iowrite32be;
}
/* SPI controller initializations */
xspi_init_hw(xspi->regs);
xspi_init_hw(xspi);
/* Register for SPI Interrupt */
ret = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);

2
include/linux/spi/xilinx_spi.h
View File

@ -4,11 +4,13 @@
/**
* struct xspi_platform_data - Platform data of the Xilinx SPI driver
* @num_chipselect: Number of chip select by the IP
* @little_endian If registers should be accessed little endian or not
* @devices: Devices to add when the driver is probed.
* @num_devices: Number of devices in the devices array.
*/
struct xspi_platform_data {
u16 num_chipselect;
bool little_endian;
struct spi_board_info *devices;
u8 num_devices;
};