OMAP: omap4sdp: move display init from board file to dss-common.c
Device tree support for omapdss is still some way in the future. In an effort to get a minimal DSS support for DT enabled kernel on selected OMAP4 boards, we'll go for a temporary solution: We will call the same non-DT omapdss setup code for OMAP4 SDP and Pandaboards from board-generic.c, thus enabling DSS for those boards. This patch moves the display setup code from board-4430sdp.c to dss-common.c. dss-common.c will be called by the board-4430sdp.c when running on non-DT kernel, and by board-generic.c when running on DT enabled kernel. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Tomi Valkeinen
Tony Lindgren
parent
0191bf368f
commit
86cf29dc5a
|
|
@ -37,9 +37,6 @@
|
||||||
#include <plat/usb.h>
|
#include <plat/usb.h>
|
||||||
#include <plat/mmc.h>
|
#include <plat/mmc.h>
|
||||||
#include "omap4-keypad.h"
|
#include "omap4-keypad.h"
|
||||||
#include <video/omapdss.h>
|
|
||||||
#include <video/omap-panel-nokia-dsi.h>
|
|
||||||
#include <video/omap-panel-picodlp.h>
|
|
||||||
#include <linux/wl12xx.h>
|
#include <linux/wl12xx.h>
|
||||||
#include <linux/platform_data/omap-abe-twl6040.h>
|
#include <linux/platform_data/omap-abe-twl6040.h>
|
||||||
|
|
||||||
|
|
@ -48,17 +45,13 @@
|
||||||
#include "hsmmc.h"
|
#include "hsmmc.h"
|
||||||
#include "control.h"
|
#include "control.h"
|
||||||
#include "common-board-devices.h"
|
#include "common-board-devices.h"
|
||||||
|
#include "dss-common.h"
|
||||||
|
|
||||||
#define ETH_KS8851_IRQ 34
|
#define ETH_KS8851_IRQ 34
|
||||||
#define ETH_KS8851_POWER_ON 48
|
#define ETH_KS8851_POWER_ON 48
|
||||||
#define ETH_KS8851_QUART 138
|
#define ETH_KS8851_QUART 138
|
||||||
#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184
|
#define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184
|
||||||
#define OMAP4_SFH7741_ENABLE_GPIO 188
|
#define OMAP4_SFH7741_ENABLE_GPIO 188
|
||||||
#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */
|
|
||||||
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
|
|
||||||
#define HDMI_GPIO_HPD 63 /* Hotplug detect */
|
|
||||||
#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
|
|
||||||
#define DLP_POWER_ON_GPIO 40
|
|
||||||
|
|
||||||
#define GPIO_WIFI_PMENA 54
|
#define GPIO_WIFI_PMENA 54
|
||||||
#define GPIO_WIFI_IRQ 53
|
#define GPIO_WIFI_IRQ 53
|
||||||
|
|
@ -607,154 +600,6 @@ static void __init omap_sfh7741prox_init(void)
|
||||||
__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
|
__func__, OMAP4_SFH7741_ENABLE_GPIO, error);
|
||||||
}
|
}
|
||||||
|
|
||||||
static struct nokia_dsi_panel_data dsi1_panel = {
|
|
||||||
.name = "taal",
|
|
||||||
.reset_gpio = 102,
|
|
||||||
.use_ext_te = false,
|
|
||||||
.ext_te_gpio = 101,
|
|
||||||
.esd_interval = 0,
|
|
||||||
.pin_config = {
|
|
||||||
.num_pins = 6,
|
|
||||||
.pins = { 0, 1, 2, 3, 4, 5 },
|
|
||||||
},
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct omap_dss_device sdp4430_lcd_device = {
|
|
||||||
.name = "lcd",
|
|
||||||
.driver_name = "taal",
|
|
||||||
.type = OMAP_DISPLAY_TYPE_DSI,
|
|
||||||
.data = &dsi1_panel,
|
|
||||||
.phy.dsi = {
|
|
||||||
.module = 0,
|
|
||||||
},
|
|
||||||
.channel = OMAP_DSS_CHANNEL_LCD,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct nokia_dsi_panel_data dsi2_panel = {
|
|
||||||
.name = "taal",
|
|
||||||
.reset_gpio = 104,
|
|
||||||
.use_ext_te = false,
|
|
||||||
.ext_te_gpio = 103,
|
|
||||||
.esd_interval = 0,
|
|
||||||
.pin_config = {
|
|
||||||
.num_pins = 6,
|
|
||||||
.pins = { 0, 1, 2, 3, 4, 5 },
|
|
||||||
},
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct omap_dss_device sdp4430_lcd2_device = {
|
|
||||||
.name = "lcd2",
|
|
||||||
.driver_name = "taal",
|
|
||||||
.type = OMAP_DISPLAY_TYPE_DSI,
|
|
||||||
.data = &dsi2_panel,
|
|
||||||
.phy.dsi = {
|
|
||||||
|
|
||||||
.module = 1,
|
|
||||||
},
|
|
||||||
.channel = OMAP_DSS_CHANNEL_LCD2,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
|
|
||||||
.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
|
|
||||||
.ls_oe_gpio = HDMI_GPIO_LS_OE,
|
|
||||||
.hpd_gpio = HDMI_GPIO_HPD,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct omap_dss_device sdp4430_hdmi_device = {
|
|
||||||
.name = "hdmi",
|
|
||||||
.driver_name = "hdmi_panel",
|
|
||||||
.type = OMAP_DISPLAY_TYPE_HDMI,
|
|
||||||
.channel = OMAP_DSS_CHANNEL_DIGIT,
|
|
||||||
.data = &sdp4430_hdmi_data,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct picodlp_panel_data sdp4430_picodlp_pdata = {
|
|
||||||
.picodlp_adapter_id = 2,
|
|
||||||
.emu_done_gpio = 44,
|
|
||||||
.pwrgood_gpio = 45,
|
|
||||||
};
|
|
||||||
|
|
||||||
static void sdp4430_picodlp_init(void)
|
|
||||||
{
|
|
||||||
int r;
|
|
||||||
const struct gpio picodlp_gpios[] = {
|
|
||||||
{DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
|
|
||||||
"DLP POWER ON"},
|
|
||||||
{sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
|
|
||||||
"DLP EMU DONE"},
|
|
||||||
{sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
|
|
||||||
"DLP PWRGOOD"},
|
|
||||||
};
|
|
||||||
|
|
||||||
r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
|
|
||||||
if (r)
|
|
||||||
pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
|
|
||||||
}
|
|
||||||
|
|
||||||
static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
|
|
||||||
{
|
|
||||||
gpio_set_value(DISPLAY_SEL_GPIO, 0);
|
|
||||||
gpio_set_value(DLP_POWER_ON_GPIO, 1);
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
|
|
||||||
{
|
|
||||||
gpio_set_value(DLP_POWER_ON_GPIO, 0);
|
|
||||||
gpio_set_value(DISPLAY_SEL_GPIO, 1);
|
|
||||||
}
|
|
||||||
|
|
||||||
static struct omap_dss_device sdp4430_picodlp_device = {
|
|
||||||
.name = "picodlp",
|
|
||||||
.driver_name = "picodlp_panel",
|
|
||||||
.type = OMAP_DISPLAY_TYPE_DPI,
|
|
||||||
.phy.dpi.data_lines = 24,
|
|
||||||
.channel = OMAP_DSS_CHANNEL_LCD2,
|
|
||||||
.platform_enable = sdp4430_panel_enable_picodlp,
|
|
||||||
.platform_disable = sdp4430_panel_disable_picodlp,
|
|
||||||
.data = &sdp4430_picodlp_pdata,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct omap_dss_device *sdp4430_dss_devices[] = {
|
|
||||||
&sdp4430_lcd_device,
|
|
||||||
&sdp4430_lcd2_device,
|
|
||||||
&sdp4430_hdmi_device,
|
|
||||||
&sdp4430_picodlp_device,
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct omap_dss_board_info sdp4430_dss_data = {
|
|
||||||
.num_devices = ARRAY_SIZE(sdp4430_dss_devices),
|
|
||||||
.devices = sdp4430_dss_devices,
|
|
||||||
.default_device = &sdp4430_lcd_device,
|
|
||||||
};
|
|
||||||
|
|
||||||
static void __init omap_4430sdp_display_init(void)
|
|
||||||
{
|
|
||||||
int r;
|
|
||||||
|
|
||||||
/* Enable LCD2 by default (instead of Pico DLP) */
|
|
||||||
r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
|
|
||||||
"display_sel");
|
|
||||||
if (r)
|
|
||||||
pr_err("%s: Could not get display_sel GPIO\n", __func__);
|
|
||||||
|
|
||||||
sdp4430_picodlp_init();
|
|
||||||
omap_display_init(&sdp4430_dss_data);
|
|
||||||
/*
|
|
||||||
* OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
|
|
||||||
* later have external pull up on the HDMI I2C lines
|
|
||||||
*/
|
|
||||||
if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
|
|
||||||
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
|
|
||||||
else
|
|
||||||
omap_hdmi_init(0);
|
|
||||||
|
|
||||||
omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
|
|
||||||
omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
|
|
||||||
omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
|
|
||||||
}
|
|
||||||
|
|
||||||
#ifdef CONFIG_OMAP_MUX
|
#ifdef CONFIG_OMAP_MUX
|
||||||
static struct omap_board_mux board_mux[] __initdata = {
|
static struct omap_board_mux board_mux[] __initdata = {
|
||||||
OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
|
OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
|
||||||
|
|
|
||||||
|
|
@ -24,8 +24,12 @@
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <linux/kernel.h>
|
#include <linux/kernel.h>
|
||||||
|
#include <linux/gpio.h>
|
||||||
|
|
||||||
#include <video/omapdss.h>
|
#include <video/omapdss.h>
|
||||||
#include <video/omap-panel-tfp410.h>
|
#include <video/omap-panel-tfp410.h>
|
||||||
|
#include <video/omap-panel-nokia-dsi.h>
|
||||||
|
#include <video/omap-panel-picodlp.h>
|
||||||
|
|
||||||
#include <plat/cpu.h>
|
#include <plat/cpu.h>
|
||||||
|
|
||||||
|
|
@ -102,3 +106,171 @@ void __init omap4_panda_display_init_of(void)
|
||||||
{
|
{
|
||||||
omap_display_init(&omap4_panda_dss_data);
|
omap_display_init(&omap4_panda_dss_data);
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/* OMAP4 Blaze display data */
|
||||||
|
|
||||||
|
#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
|
||||||
|
#define DLP_POWER_ON_GPIO 40
|
||||||
|
|
||||||
|
static struct nokia_dsi_panel_data dsi1_panel = {
|
||||||
|
.name = "taal",
|
||||||
|
.reset_gpio = 102,
|
||||||
|
.use_ext_te = false,
|
||||||
|
.ext_te_gpio = 101,
|
||||||
|
.esd_interval = 0,
|
||||||
|
.pin_config = {
|
||||||
|
.num_pins = 6,
|
||||||
|
.pins = { 0, 1, 2, 3, 4, 5 },
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct omap_dss_device sdp4430_lcd_device = {
|
||||||
|
.name = "lcd",
|
||||||
|
.driver_name = "taal",
|
||||||
|
.type = OMAP_DISPLAY_TYPE_DSI,
|
||||||
|
.data = &dsi1_panel,
|
||||||
|
.phy.dsi = {
|
||||||
|
.module = 0,
|
||||||
|
},
|
||||||
|
.channel = OMAP_DSS_CHANNEL_LCD,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct nokia_dsi_panel_data dsi2_panel = {
|
||||||
|
.name = "taal",
|
||||||
|
.reset_gpio = 104,
|
||||||
|
.use_ext_te = false,
|
||||||
|
.ext_te_gpio = 103,
|
||||||
|
.esd_interval = 0,
|
||||||
|
.pin_config = {
|
||||||
|
.num_pins = 6,
|
||||||
|
.pins = { 0, 1, 2, 3, 4, 5 },
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct omap_dss_device sdp4430_lcd2_device = {
|
||||||
|
.name = "lcd2",
|
||||||
|
.driver_name = "taal",
|
||||||
|
.type = OMAP_DISPLAY_TYPE_DSI,
|
||||||
|
.data = &dsi2_panel,
|
||||||
|
.phy.dsi = {
|
||||||
|
|
||||||
|
.module = 1,
|
||||||
|
},
|
||||||
|
.channel = OMAP_DSS_CHANNEL_LCD2,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
|
||||||
|
.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
|
||||||
|
.ls_oe_gpio = HDMI_GPIO_LS_OE,
|
||||||
|
.hpd_gpio = HDMI_GPIO_HPD,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct omap_dss_device sdp4430_hdmi_device = {
|
||||||
|
.name = "hdmi",
|
||||||
|
.driver_name = "hdmi_panel",
|
||||||
|
.type = OMAP_DISPLAY_TYPE_HDMI,
|
||||||
|
.channel = OMAP_DSS_CHANNEL_DIGIT,
|
||||||
|
.data = &sdp4430_hdmi_data,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct picodlp_panel_data sdp4430_picodlp_pdata = {
|
||||||
|
.picodlp_adapter_id = 2,
|
||||||
|
.emu_done_gpio = 44,
|
||||||
|
.pwrgood_gpio = 45,
|
||||||
|
};
|
||||||
|
|
||||||
|
static void sdp4430_picodlp_init(void)
|
||||||
|
{
|
||||||
|
int r;
|
||||||
|
const struct gpio picodlp_gpios[] = {
|
||||||
|
{DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
|
||||||
|
"DLP POWER ON"},
|
||||||
|
{sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
|
||||||
|
"DLP EMU DONE"},
|
||||||
|
{sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
|
||||||
|
"DLP PWRGOOD"},
|
||||||
|
};
|
||||||
|
|
||||||
|
r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
|
||||||
|
if (r)
|
||||||
|
pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
|
||||||
|
{
|
||||||
|
gpio_set_value(DISPLAY_SEL_GPIO, 0);
|
||||||
|
gpio_set_value(DLP_POWER_ON_GPIO, 1);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
|
||||||
|
{
|
||||||
|
gpio_set_value(DLP_POWER_ON_GPIO, 0);
|
||||||
|
gpio_set_value(DISPLAY_SEL_GPIO, 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct omap_dss_device sdp4430_picodlp_device = {
|
||||||
|
.name = "picodlp",
|
||||||
|
.driver_name = "picodlp_panel",
|
||||||
|
.type = OMAP_DISPLAY_TYPE_DPI,
|
||||||
|
.phy.dpi.data_lines = 24,
|
||||||
|
.channel = OMAP_DSS_CHANNEL_LCD2,
|
||||||
|
.platform_enable = sdp4430_panel_enable_picodlp,
|
||||||
|
.platform_disable = sdp4430_panel_disable_picodlp,
|
||||||
|
.data = &sdp4430_picodlp_pdata,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct omap_dss_device *sdp4430_dss_devices[] = {
|
||||||
|
&sdp4430_lcd_device,
|
||||||
|
&sdp4430_lcd2_device,
|
||||||
|
&sdp4430_hdmi_device,
|
||||||
|
&sdp4430_picodlp_device,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct omap_dss_board_info sdp4430_dss_data = {
|
||||||
|
.num_devices = ARRAY_SIZE(sdp4430_dss_devices),
|
||||||
|
.devices = sdp4430_dss_devices,
|
||||||
|
.default_device = &sdp4430_lcd_device,
|
||||||
|
};
|
||||||
|
|
||||||
|
void __init omap_4430sdp_display_init(void)
|
||||||
|
{
|
||||||
|
int r;
|
||||||
|
|
||||||
|
/* Enable LCD2 by default (instead of Pico DLP) */
|
||||||
|
r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
|
||||||
|
"display_sel");
|
||||||
|
if (r)
|
||||||
|
pr_err("%s: Could not get display_sel GPIO\n", __func__);
|
||||||
|
|
||||||
|
sdp4430_picodlp_init();
|
||||||
|
omap_display_init(&sdp4430_dss_data);
|
||||||
|
/*
|
||||||
|
* OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
|
||||||
|
* later have external pull up on the HDMI I2C lines
|
||||||
|
*/
|
||||||
|
if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
|
||||||
|
omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
|
||||||
|
else
|
||||||
|
omap_hdmi_init(0);
|
||||||
|
|
||||||
|
omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
|
||||||
|
omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
|
||||||
|
omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
|
||||||
|
}
|
||||||
|
|
||||||
|
void __init omap_4430sdp_display_init_of(void)
|
||||||
|
{
|
||||||
|
int r;
|
||||||
|
|
||||||
|
/* Enable LCD2 by default (instead of Pico DLP) */
|
||||||
|
r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
|
||||||
|
"display_sel");
|
||||||
|
if (r)
|
||||||
|
pr_err("%s: Could not get display_sel GPIO\n", __func__);
|
||||||
|
|
||||||
|
sdp4430_picodlp_init();
|
||||||
|
omap_display_init(&sdp4430_dss_data);
|
||||||
|
}
|
||||||
|
|
|
||||||
|
|
@ -8,5 +8,7 @@
|
||||||
|
|
||||||
void __init omap4_panda_display_init(void);
|
void __init omap4_panda_display_init(void);
|
||||||
void __init omap4_panda_display_init_of(void);
|
void __init omap4_panda_display_init_of(void);
|
||||||
|
void __init omap_4430sdp_display_init(void);
|
||||||
|
void __init omap_4430sdp_display_init_of(void);
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue