MIPS: Put PGD in C0_CONTEXT for 64-bit R2 processors.

Processors that support the mips64r2 ISA can in four instructions
convert a shifted PGD pointer stored in the upper bits of c0_context
into a usable pointer.  By doing this we save a memory load and
associated potential cache miss in the TLB exception handlers.

Since the upper bits of c0_context were holding the CPU number, we
move this to the upper bits of c0_xcontext which doesn't have enough
bits to hold the PGD pointer, but has plenty for the CPU number.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
David Daney 2009-10-14 12:16:56 -07:00 committed by Ralf Baechle
parent 92078e0618
commit 82622284dd
5 changed files with 68 additions and 14 deletions

View File

@ -1427,6 +1427,9 @@ config CPU_SUPPORTS_64BIT_KERNEL
bool
config CPU_SUPPORTS_HUGEPAGES
bool
config MIPS_PGD_C0_CONTEXT
bool
default y if 64BIT && CPU_MIPSR2
#
# Set to y for ptrace access to watch registers.

View File

@ -24,6 +24,33 @@
#endif /* SMTC */
#include <asm-generic/mm_hooks.h>
#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
#define TLBMISS_HANDLER_SETUP_PGD(pgd) \
tlbmiss_handler_setup_pgd((unsigned long)(pgd))
static inline void tlbmiss_handler_setup_pgd(unsigned long pgd)
{
/* Check for swapper_pg_dir and convert to physical address. */
if ((pgd & CKSEG3) == CKSEG0)
pgd = CPHYSADDR(pgd);
write_c0_context(pgd << 11);
}
#define TLBMISS_HANDLER_SETUP() \
do { \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir); \
write_c0_xcontext((unsigned long) smp_processor_id() << 51); \
} while (0)
static inline unsigned long get_current_pgd(void)
{
return PHYS_TO_XKSEG_CACHED((read_c0_context() >> 11) & ~0xfffUL);
}
#else /* CONFIG_MIPS_PGD_C0_CONTEXT: using pgd_current*/
/*
* For the fast tlb miss handlers, we keep a per cpu array of pointers
* to the current pgd for each processor. Also, the proc. id is stuffed
@ -46,7 +73,7 @@ extern unsigned long pgd_current[];
back_to_back_c0_hazard(); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
#endif
#endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
#define ASID_INC 0x40

View File

@ -87,15 +87,19 @@
#ifdef CONFIG_SMP
#ifdef CONFIG_MIPS_MT_SMTC
#define PTEBASE_SHIFT 19 /* TCBIND */
#define CPU_ID_REG CP0_TCBIND
#define CPU_ID_MFC0 mfc0
#elif defined(CONFIG_MIPS_PGD_C0_CONTEXT)
#define PTEBASE_SHIFT 48 /* XCONTEXT */
#define CPU_ID_REG CP0_XCONTEXT
#define CPU_ID_MFC0 MFC0
#else
#define PTEBASE_SHIFT 23 /* CONTEXT */
#define CPU_ID_REG CP0_CONTEXT
#define CPU_ID_MFC0 MFC0
#endif
.macro get_saved_sp /* SMP variation */
#ifdef CONFIG_MIPS_MT_SMTC
mfc0 k0, CP0_TCBIND
#else
MFC0 k0, CP0_CONTEXT
#endif
CPU_ID_MFC0 k0, CPU_ID_REG
#if defined(CONFIG_32BIT) || defined(KBUILD_64BIT_SYM32)
lui k1, %hi(kernelsp)
#else
@ -111,11 +115,7 @@
.endm
.macro set_saved_sp stackp temp temp2
#ifdef CONFIG_MIPS_MT_SMTC
mfc0 \temp, CP0_TCBIND
#else
MFC0 \temp, CP0_CONTEXT
#endif
CPU_ID_MFC0 \temp, CPU_ID_REG
LONG_SRL \temp, PTEBASE_SHIFT
LONG_S \stackp, kernelsp(\temp)
.endm

View File

@ -462,7 +462,9 @@ void __init_refok free_initmem(void)
__pa_symbol(&__init_end));
}
#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
unsigned long pgd_current[NR_CPUS];
#endif
/*
* On 64-bit we've got three-level pagetables with a slightly
* different layout ...

View File

@ -160,6 +160,12 @@ static u32 tlb_handler[128] __cpuinitdata;
static struct uasm_label labels[128] __cpuinitdata;
static struct uasm_reloc relocs[128] __cpuinitdata;
#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
/*
* CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current,
* we cannot do r3000 under these circumstances.
*/
/*
* The R3000 TLB handler is simple.
*/
@ -199,6 +205,7 @@ static void __cpuinit build_r3000_tlb_refill_handler(void)
dump_handler((u32 *)ebase, 32);
}
#endif /* CONFIG_MIPS_PGD_C0_CONTEXT */
/*
* The R4000 TLB handler is much more complicated. We have two
@ -497,8 +504,9 @@ static void __cpuinit
build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
unsigned int tmp, unsigned int ptr)
{
#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
long pgdc = (long)pgd_current;
#endif
/*
* The vmalloc handling is not in the hotpath.
*/
@ -506,7 +514,15 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
uasm_il_bltz(p, r, tmp, label_vmalloc);
/* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */
#ifdef CONFIG_SMP
#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
/*
* &pgd << 11 stored in CONTEXT [23..63].
*/
UASM_i_MFC0(p, ptr, C0_CONTEXT);
uasm_i_dins(p, ptr, 0, 0, 23); /* Clear lower 23 bits of context. */
uasm_i_ori(p, ptr, ptr, 0x540); /* 1 0 1 0 1 << 6 xkphys cached */
uasm_i_drotr(p, ptr, ptr, 11);
#elif defined(CONFIG_SMP)
# ifdef CONFIG_MIPS_MT_SMTC
/*
* SMTC uses TCBind value as "CPU" index
@ -520,7 +536,7 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
*/
uasm_i_dmfc0(p, ptr, C0_CONTEXT);
uasm_i_dsrl(p, ptr, ptr, 23);
#endif
# endif
UASM_i_LA_mostly(p, tmp, pgdc);
uasm_i_daddu(p, ptr, ptr, tmp);
uasm_i_dmfc0(p, tmp, C0_BADVADDR);
@ -1033,6 +1049,7 @@ build_pte_modifiable(u32 **p, struct uasm_reloc **r,
iPTE_LW(p, pte, ptr);
}
#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
/*
* R3000 style TLB load/store/modify handlers.
*/
@ -1184,6 +1201,7 @@ static void __cpuinit build_r3000_tlb_modify_handler(void)
dump_handler(handle_tlbm, ARRAY_SIZE(handle_tlbm));
}
#endif /* CONFIG_MIPS_PGD_C0_CONTEXT */
/*
* R4000 style TLB load/store/modify handlers.
@ -1400,6 +1418,7 @@ void __cpuinit build_tlb_refill_handler(void)
case CPU_TX3912:
case CPU_TX3922:
case CPU_TX3927:
#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
build_r3000_tlb_refill_handler();
if (!run_once) {
build_r3000_tlb_load_handler();
@ -1407,6 +1426,9 @@ void __cpuinit build_tlb_refill_handler(void)
build_r3000_tlb_modify_handler();
run_once++;
}
#else
panic("No R3000 TLB refill handler");
#endif
break;
case CPU_R6000: