ARM: SoC updates for 3.16 (part 1)
A quite large set of SoC updates this cycle. In no particular order:
- Multi-cluster power management for Samsung Exynos, adding support for
big.LITTLE CPU switching on EXYNOS5
- SMP support for Marvell Armada 375 and 38x
- SMP rework on Allwinner A31
- Xilinx Zynq support for SOC_BUS, big endian
- Marvell orion5x platform cleanup, modernizing the implementation and
moving to DT.
- _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
that their platform can be enabled in the same kernel binary as most
of the other v7 platforms in the tree. \o/ The work isn't quite complete,
there's some driver fixes still needed, but the basics now work.
New SoC support added:
- Freescale i.MX6SX
- LSI Axxia AXM55xx SoCs
- Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800
- STi STIH407
Plus a large set of various smaller updates for different platforms. I'm
probably missing some important one here.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQIcBAABAgAGBQJTjOKWAAoJEIwa5zzehBx36aEP/2vTD7x9FC59FACNHJ8iO7aw
0ebTgBBjI1Np6X18O+M7URbxV5TaBgwpUm/NDN86p03MpQ2eOXr8r47qVxe/HhZs
AdlTvzgE6QwxcVL/HeCKKUEN3BPH74+TZgFl9I5aSzNjpR39xETeK1aWP/ZiAl/q
/lGRZAQ59+c7Ung00Hg0g2YDxH9WFpK50Nj90ROnyjKSFkhIYngXYVpZB3maOypq
Pgib/U8IraKZ52oGJw3yinSoORr7FdcUdAGWGTz/lQdNL/jYDfQ6GkRW2oblWXdt
3Xvj9UW6NmkbMICucMvFuuW1nXAgutZuTp9w7mBxsiUlYepxPv/DXM6yiI1WGlEb
BeVOmOreNeN2nT6avv/uUhk3Osq63Jn9x8cz5y+7/lgWQwllh3/c+G01RotvgJEQ
vpQq5ps9fMxIAMaNP6N/YqMJI1IOrBj0iXxaZEDw3VYM/k4lSvtb3VXP9c/rqApu
U4i6hpSIGzrraU4NrjndYPndcLeNOVZbByETQKosZXuCo6G1sb7FstNSkzI9vSo8
O/pujIVUfYyBW82GzZGDw+aa7DWA29FPeUQ3p+sj5MSCg051xXT8h6QwqMo2K/zY
5ATs/qo6w7zH/Ou9rtHTRynCIb0GQJThDSlWtuXFedUF9quEltS+TDz/2o+dWtGJ
yBFGKDRuBB20D36w9xqg
=6LYI
-----END PGP SIGNATURE-----
Merge tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into next
Pull part one of ARM SoC updates from Olof Johansson:
"A quite large set of SoC updates this cycle. In no particular order:
- Multi-cluster power management for Samsung Exynos, adding support
for big.LITTLE CPU switching on EXYNOS5
- SMP support for Marvell Armada 375 and 38x
- SMP rework on Allwinner A31
- Xilinx Zynq support for SOC_BUS, big endian
- Marvell orion5x platform cleanup, modernizing the implementation
and moving to DT.
- _Finally_ moving Samsung Exynos over to support MULTIPLATFORM, so
that their platform can be enabled in the same kernel binary as
most of the other v7 platforms in the tree. \o/
The work isn't quite complete, there's some driver fixes still
needed, but the basics now work.
New SoC support added:
- Freescale i.MX6SX
- LSI Axxia AXM55xx SoCs
- Samsung EXYNOS 3250, 5260, 5410, 5420 and 5800
- STi STIH407
plus a large set of various smaller updates for different platforms.
I'm probably missing some important one here"
* tag 'soc-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (281 commits)
ARM: exynos: don't run exynos4 l2x0 setup on other platforms
ARM: exynos: Fix "allmodconfig" build errors in mcpm and hotplug
ARM: EXYNOS: mcpm rename the power_down_finish
ARM: EXYNOS: Enable mcpm for dual-cluster exynos5800 SoC
ARM: EXYNOS: Enable multi-platform build support
ARM: EXYNOS: Consolidate Kconfig entries
ARM: EXYNOS: Add support for EXYNOS5410 SoC
ARM: EXYNOS: Support secondary CPU boot of Exynos3250
ARM: EXYNOS: Add Exynos3250 SoC ID
ARM: EXYNOS: Add 5800 SoC support
ARM: EXYNOS: initial board support for exynos5260 SoC
clk: exynos5410: register clocks using common clock framework
ARM: debug: qcom: add UART addresses to Kconfig help for APQ8084
ARM: sunxi: allow building without reset controller
Documentation: devicetree: arm: sort enable-method entries
ARM: rockchip: convert smp bringup to CPU_METHOD_OF_DECLARE
clk: exynos5250: Add missing sysmmu clocks for DISP and ISP blocks
ARM: dts: axxia: Add reset controller
power: reset: Add Axxia system reset driver
ARM: axxia: Adding defconfig for AXM55xx
...
This commit is contained in:
Linus Torvalds
commit
825f4e0271
|
|
@ -234,6 +234,11 @@ Berlin family (Digital Entertainment)
|
|||
Core: Marvell PJ4B (ARMv7), Tauros3 L2CC
|
||||
Homepage: http://www.marvell.com/digital-entertainment/armada-1500/
|
||||
Product Brief: http://www.marvell.com/digital-entertainment/armada-1500/assets/Marvell-ARMADA-1500-Product-Brief.pdf
|
||||
88DE3114, Armada 1500 Pro
|
||||
Design name: BG2-Q
|
||||
Core: Quad Core ARM Cortex-A9, PL310 L2CC
|
||||
Homepage: http://www.marvell.com/digital-entertainment/armada-1500-pro/
|
||||
Product Brief: http://www.marvell.com/digital-entertainment/armada-1500-pro/assets/Marvell_ARMADA_1500_PRO-01_product_brief.pdf
|
||||
88DE????
|
||||
Design name: BG3
|
||||
Core: ARM Cortex-A15, CA15 integrated L2CC
|
||||
|
|
|
|||
|
|
@ -0,0 +1,18 @@
|
|||
STiH407 Overview
|
||||
================
|
||||
|
||||
Introduction
|
||||
------------
|
||||
|
||||
The STiH407 is the new generation of SoC for Multi-HD, AVC set-top boxes
|
||||
and server/connected client application for satellite, cable, terrestrial
|
||||
and IP-STB markets.
|
||||
|
||||
Features
|
||||
- ARM Cortex-A9 1.5 GHz dual core CPU (28nm)
|
||||
- SATA2, USB 3.0, PCIe, Gbit Ethernet
|
||||
|
||||
Document Author
|
||||
---------------
|
||||
|
||||
Maxime Coquelin <maxime.coquelin@st.com>, (c) 2014 ST Microelectronics
|
||||
|
|
@ -1,20 +1,21 @@
|
|||
Power Management Service Unit(PMSU)
|
||||
-----------------------------------
|
||||
Available on Marvell SOCs: Armada 370 and Armada XP
|
||||
Available on Marvell SOCs: Armada 370, Armada 38x and Armada XP
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: "marvell,armada-370-xp-pmsu"
|
||||
- compatible: should be one of:
|
||||
- "marvell,armada-370-pmsu" for Armada 370 or Armada XP
|
||||
- "marvell,armada-380-pmsu" for Armada 38x
|
||||
- "marvell,armada-370-xp-pmsu" was used for Armada 370/XP but is now
|
||||
deprecated and will be removed
|
||||
|
||||
- reg: Should contain PMSU registers location and length. First pair
|
||||
for the per-CPU SW Reset Control registers, second pair for the
|
||||
Power Management Service Unit.
|
||||
- reg: Should contain PMSU registers location and length.
|
||||
|
||||
Example:
|
||||
|
||||
armada-370-xp-pmsu@d0022000 {
|
||||
compatible = "marvell,armada-370-xp-pmsu";
|
||||
reg = <0xd0022100 0x430>,
|
||||
<0xd0020800 0x20>;
|
||||
armada-370-xp-pmsu@22000 {
|
||||
compatible = "marvell,armada-370-pmsu";
|
||||
reg = <0x22000 0x1000>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,14 @@
|
|||
Marvell Armada CPU reset controller
|
||||
===================================
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: Should be "marvell,armada-370-cpu-reset".
|
||||
|
||||
- reg: should be register base and length as documented in the
|
||||
datasheet for the CPU reset registers
|
||||
|
||||
cpurst: cpurst@20800 {
|
||||
compatible = "marvell,armada-370-cpu-reset";
|
||||
reg = <0x20800 0x20>;
|
||||
};
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
Axxia AXM55xx device tree bindings
|
||||
|
||||
Boards using the AXM55xx SoC need to have the following properties:
|
||||
|
||||
Required root node property:
|
||||
|
||||
- compatible = "lsi,axm5516"
|
||||
|
||||
Boards:
|
||||
|
||||
LSI AXM5516 Validation board (Amarillo)
|
||||
compatible = "lsi,axm5516-amarillo", "lsi,axm5516"
|
||||
|
|
@ -1,16 +1,33 @@
|
|||
Coherency fabric
|
||||
----------------
|
||||
Available on Marvell SOCs: Armada 370 and Armada XP
|
||||
Available on Marvell SOCs: Armada 370, Armada 375, Armada 38x and Armada XP
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible: "marvell,coherency-fabric"
|
||||
- compatible: the possible values are:
|
||||
|
||||
* "marvell,coherency-fabric", to be used for the coherency fabric of
|
||||
the Armada 370 and Armada XP.
|
||||
|
||||
* "marvell,armada-375-coherency-fabric", for the Armada 375 coherency
|
||||
fabric.
|
||||
|
||||
* "marvell,armada-380-coherency-fabric", for the Armada 38x coherency
|
||||
fabric.
|
||||
|
||||
- reg: Should contain coherency fabric registers location and
|
||||
length. First pair for the coherency fabric registers, second pair
|
||||
for the per-CPU fabric registers registers.
|
||||
length.
|
||||
|
||||
Example:
|
||||
* For "marvell,coherency-fabric", the first pair for the coherency
|
||||
fabric registers, second pair for the per-CPU fabric registers.
|
||||
|
||||
* For "marvell,armada-375-coherency-fabric", only one pair is needed
|
||||
for the per-CPU fabric registers.
|
||||
|
||||
* For "marvell,armada-380-coherency-fabric", only one pair is needed
|
||||
for the per-CPU fabric registers.
|
||||
|
||||
Examples:
|
||||
|
||||
coherency-fabric@d0020200 {
|
||||
compatible = "marvell,coherency-fabric";
|
||||
|
|
@ -19,3 +36,8 @@ coherency-fabric@d0020200 {
|
|||
|
||||
};
|
||||
|
||||
coherency-fabric@21810 {
|
||||
compatible = "marvell,armada-375-coherency-fabric";
|
||||
reg = <0x21810 0x1c>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -178,13 +178,19 @@ nodes to be present and contain the properties described below.
|
|||
Usage and definition depend on ARM architecture version.
|
||||
# On ARM v8 64-bit this property is required and must
|
||||
be one of:
|
||||
"spin-table"
|
||||
"psci"
|
||||
"spin-table"
|
||||
# On ARM 32-bit systems this property is optional and
|
||||
can be one of:
|
||||
"allwinner,sun6i-a31"
|
||||
"arm,psci"
|
||||
"marvell,armada-375-smp"
|
||||
"marvell,armada-380-smp"
|
||||
"marvell,armada-xp-smp"
|
||||
"qcom,gcc-msm8660"
|
||||
"qcom,kpss-acc-v1"
|
||||
"qcom,kpss-acc-v2"
|
||||
"rockchip,rk3066-smp"
|
||||
|
||||
- cpu-release-addr
|
||||
Usage: required for systems that have an "enable-method"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,38 @@
|
|||
Samsung Exynos SYSRAM for SMP bringup:
|
||||
------------------------------------
|
||||
|
||||
Samsung SMP-capable Exynos SoCs use part of the SYSRAM for the bringup
|
||||
of the secondary cores. Once the core gets powered up it executes the
|
||||
code that is residing at some specific location of the SYSRAM.
|
||||
|
||||
Therefore reserved section sub-nodes have to be added to the mmio-sram
|
||||
declaration. These nodes are of two types depending upon secure or
|
||||
non-secure execution environment.
|
||||
|
||||
Required sub-node properties:
|
||||
- compatible : depending upon boot mode, should be
|
||||
"samsung,exynos4210-sysram" : for Secure SYSRAM
|
||||
"samsung,exynos4210-sysram-ns" : for Non-secure SYSRAM
|
||||
|
||||
The rest of the properties should follow the generic mmio-sram discription
|
||||
found in ../../misc/sysram.txt
|
||||
|
||||
Example:
|
||||
|
||||
sysram@02020000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x02020000 0x54000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x02020000 0x54000>;
|
||||
|
||||
smp-sysram@0 {
|
||||
compatible = "samsung,exynos4210-sysram";
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
smp-sysram@53000 {
|
||||
compatible = "samsung,exynos4210-sysram-ns";
|
||||
reg = <0x53000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
ST STi Platforms Device Tree Bindings
|
||||
---------------------------------------
|
||||
|
||||
Boards with the ST STiH415 SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible = "st,stih415";
|
||||
|
||||
Boards with the ST STiH416 SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible = "st,stih416";
|
||||
|
||||
Boards with the ST STiH407 SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible = "st,stih407";
|
||||
|
||||
|
|
@ -6,6 +6,16 @@ This binding uses the common clock binding[1].
|
|||
|
||||
Required properties:
|
||||
- compatible : shall be one of the following:
|
||||
"atmel,at91sam9x5-sckc":
|
||||
at91 SCKC (Slow Clock Controller)
|
||||
This node contains the slow clock definitions.
|
||||
|
||||
"atmel,at91sam9x5-clk-slow-osc":
|
||||
at91 slow oscillator
|
||||
|
||||
"atmel,at91sam9x5-clk-slow-rc-osc":
|
||||
at91 internal slow RC oscillator
|
||||
|
||||
"atmel,at91rm9200-pmc" or
|
||||
"atmel,at91sam9g45-pmc" or
|
||||
"atmel,at91sam9n12-pmc" or
|
||||
|
|
@ -15,8 +25,18 @@ Required properties:
|
|||
All at91 specific clocks (clocks defined below) must be child
|
||||
node of the PMC node.
|
||||
|
||||
"atmel,at91sam9x5-clk-slow" (under sckc node)
|
||||
or
|
||||
"atmel,at91sam9260-clk-slow" (under pmc node):
|
||||
at91 slow clk
|
||||
|
||||
"atmel,at91rm9200-clk-main-osc"
|
||||
"atmel,at91sam9x5-clk-main-rc-osc"
|
||||
at91 main clk sources
|
||||
|
||||
"atmel,at91sam9x5-clk-main"
|
||||
"atmel,at91rm9200-clk-main":
|
||||
at91 main oscillator
|
||||
at91 main clock
|
||||
|
||||
"atmel,at91rm9200-clk-master" or
|
||||
"atmel,at91sam9x5-clk-master":
|
||||
|
|
@ -54,6 +74,63 @@ Required properties:
|
|||
"atmel,at91sam9x5-clk-utmi":
|
||||
at91 utmi clock
|
||||
|
||||
Required properties for SCKC node:
|
||||
- reg : defines the IO memory reserved for the SCKC.
|
||||
- #size-cells : shall be 0 (reg is used to encode clk id).
|
||||
- #address-cells : shall be 1 (reg is used to encode clk id).
|
||||
|
||||
|
||||
For example:
|
||||
sckc: sckc@fffffe50 {
|
||||
compatible = "atmel,sama5d3-pmc";
|
||||
reg = <0xfffffe50 0x4>
|
||||
#size-cells = <0>;
|
||||
#address-cells = <1>;
|
||||
|
||||
/* put at91 slow clocks here */
|
||||
};
|
||||
|
||||
|
||||
Required properties for internal slow RC oscillator:
|
||||
- #clock-cells : from common clock binding; shall be set to 0.
|
||||
- clock-frequency : define the internal RC oscillator frequency.
|
||||
|
||||
Optional properties:
|
||||
- clock-accuracy : define the internal RC oscillator accuracy.
|
||||
|
||||
For example:
|
||||
slow_rc_osc: slow_rc_osc {
|
||||
compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
|
||||
clock-frequency = <32768>;
|
||||
clock-accuracy = <50000000>;
|
||||
};
|
||||
|
||||
Required properties for slow oscillator:
|
||||
- #clock-cells : from common clock binding; shall be set to 0.
|
||||
- clocks : shall encode the main osc source clk sources (see atmel datasheet).
|
||||
|
||||
Optional properties:
|
||||
- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
|
||||
provided on XIN.
|
||||
|
||||
For example:
|
||||
slow_osc: slow_osc {
|
||||
compatible = "atmel,at91rm9200-clk-slow-osc";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&slow_xtal>;
|
||||
};
|
||||
|
||||
Required properties for slow clock:
|
||||
- #clock-cells : from common clock binding; shall be set to 0.
|
||||
- clocks : shall encode the slow clk sources (see atmel datasheet).
|
||||
|
||||
For example:
|
||||
clk32k: slck {
|
||||
compatible = "atmel,at91sam9x5-clk-slow";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&slow_rc_osc &slow_osc>;
|
||||
};
|
||||
|
||||
Required properties for PMC node:
|
||||
- reg : defines the IO memory reserved for the PMC.
|
||||
- #size-cells : shall be 0 (reg is used to encode clk id).
|
||||
|
|
@ -85,24 +162,57 @@ For example:
|
|||
/* put at91 clocks here */
|
||||
};
|
||||
|
||||
Required properties for main clock internal RC oscillator:
|
||||
- interrupt-parent : must reference the PMC node.
|
||||
- interrupts : shall be set to "<0>".
|
||||
- clock-frequency : define the internal RC oscillator frequency.
|
||||
|
||||
Optional properties:
|
||||
- clock-accuracy : define the internal RC oscillator accuracy.
|
||||
|
||||
For example:
|
||||
main_rc_osc: main_rc_osc {
|
||||
compatible = "atmel,at91sam9x5-clk-main-rc-osc";
|
||||
interrupt-parent = <&pmc>;
|
||||
interrupts = <0>;
|
||||
clock-frequency = <12000000>;
|
||||
clock-accuracy = <50000000>;
|
||||
};
|
||||
|
||||
Required properties for main clock oscillator:
|
||||
- interrupt-parent : must reference the PMC node.
|
||||
- interrupts : shall be set to "<0>".
|
||||
- #clock-cells : from common clock binding; shall be set to 0.
|
||||
- clocks : shall encode the main osc source clk sources (see atmel datasheet).
|
||||
|
||||
Optional properties:
|
||||
- atmel,osc-bypass : boolean property. Specified if a clock signal is provided
|
||||
on XIN.
|
||||
|
||||
clock signal is directly provided on XIN pin.
|
||||
|
||||
For example:
|
||||
main_osc: main_osc {
|
||||
compatible = "atmel,at91rm9200-clk-main-osc";
|
||||
interrupt-parent = <&pmc>;
|
||||
interrupts = <0>;
|
||||
#clock-cells = <0>;
|
||||
clocks = <&main_xtal>;
|
||||
};
|
||||
|
||||
Required properties for main clock:
|
||||
- interrupt-parent : must reference the PMC node.
|
||||
- interrupts : shall be set to "<0>".
|
||||
- #clock-cells : from common clock binding; shall be set to 0.
|
||||
- clocks (optional if clock-frequency is provided) : shall be the slow clock
|
||||
phandle. This clock is used to calculate the main clock rate if
|
||||
"clock-frequency" is not provided.
|
||||
- clock-frequency : the main oscillator frequency.Prefer the use of
|
||||
"clock-frequency" over automatic clock rate calculation.
|
||||
- clocks : shall encode the main clk sources (see atmel datasheet).
|
||||
|
||||
For example:
|
||||
main: mainck {
|
||||
compatible = "atmel,at91rm9200-clk-main";
|
||||
compatible = "atmel,at91sam9x5-clk-main";
|
||||
interrupt-parent = <&pmc>;
|
||||
interrupts = <0>;
|
||||
#clock-cells = <0>;
|
||||
clocks = <&ck32k>;
|
||||
clock-frequency = <18432000>;
|
||||
clocks = <&main_rc_osc &main_osc>;
|
||||
};
|
||||
|
||||
Required properties for master clock:
|
||||
|
|
|
|||
|
|
@ -0,0 +1,41 @@
|
|||
* Samsung Exynos3250 Clock Controller
|
||||
|
||||
The Exynos3250 clock controller generates and supplies clock to various
|
||||
controllers within the Exynos3250 SoC.
|
||||
|
||||
Required Properties:
|
||||
|
||||
- compatible: should be one of the following.
|
||||
- "samsung,exynos3250-cmu" - controller compatible with Exynos3250 SoC.
|
||||
|
||||
- reg: physical base address of the controller and length of memory mapped
|
||||
region.
|
||||
|
||||
- #clock-cells: should be 1.
|
||||
|
||||
Each clock is assigned an identifier and client nodes can use this identifier
|
||||
to specify the clock which they consume.
|
||||
|
||||
All available clocks are defined as preprocessor macros in
|
||||
dt-bindings/clock/exynos3250.h header and can be used in device
|
||||
tree sources.
|
||||
|
||||
Example 1: An example of a clock controller node is listed below.
|
||||
|
||||
cmu: clock-controller@10030000 {
|
||||
compatible = "samsung,exynos3250-cmu";
|
||||
reg = <0x10030000 0x20000>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
Example 2: UART controller node that consumes the clock generated by the clock
|
||||
controller. Refer to the standard clock bindings for information
|
||||
about 'clocks' and 'clock-names' property.
|
||||
|
||||
serial@13800000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x13800000 0x100>;
|
||||
interrupts = <0 109 0>;
|
||||
clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
|
@ -0,0 +1,190 @@
|
|||
* Samsung Exynos5260 Clock Controller
|
||||
|
||||
Exynos5260 has 13 clock controllers which are instantiated
|
||||
independently from the device-tree. These clock controllers
|
||||
generate and supply clocks to various hardware blocks within
|
||||
the SoC.
|
||||
|
||||
Each clock is assigned an identifier and client nodes can use
|
||||
this identifier to specify the clock which they consume. All
|
||||
available clocks are defined as preprocessor macros in
|
||||
dt-bindings/clock/exynos5260-clk.h header and can be used in
|
||||
device tree sources.
|
||||
|
||||
External clocks:
|
||||
|
||||
There are several clocks that are generated outside the SoC. It
|
||||
is expected that they are defined using standard clock bindings
|
||||
with following clock-output-names:
|
||||
|
||||
- "fin_pll" - PLL input clock from XXTI
|
||||
- "xrtcxti" - input clock from XRTCXTI
|
||||
- "ioclk_pcm_extclk" - pcm external operation clock
|
||||
- "ioclk_spdif_extclk" - spdif external operation clock
|
||||
- "ioclk_i2s_cdclk" - i2s0 codec clock
|
||||
|
||||
Phy clocks:
|
||||
|
||||
There are several clocks which are generated by specific PHYs.
|
||||
These clocks are fed into the clock controller and then routed to
|
||||
the hardware blocks. These clocks are defined as fixed clocks in the
|
||||
driver with following names:
|
||||
|
||||
- "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
|
||||
- "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
|
||||
- "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
|
||||
- "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
|
||||
- "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
|
||||
- "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
|
||||
- "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
|
||||
- "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
|
||||
- "phyclk_dptx_phy_clk_div2"
|
||||
- "phyclk_mipi_dphy_4l_m_rxclkesc0"
|
||||
- "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
|
||||
- "phyclk_usbhost20_phy_freeclk"
|
||||
- "phyclk_usbhost20_phy_clk48mohci"
|
||||
- "phyclk_usbdrd30_udrd30_pipe_pclk"
|
||||
- "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
|
||||
|
||||
Required Properties for Clock Controller:
|
||||
|
||||
- compatible: should be one of the following.
|
||||
1) "samsung,exynos5260-clock-top"
|
||||
2) "samsung,exynos5260-clock-peri"
|
||||
3) "samsung,exynos5260-clock-egl"
|
||||
4) "samsung,exynos5260-clock-kfc"
|
||||
5) "samsung,exynos5260-clock-g2d"
|
||||
6) "samsung,exynos5260-clock-mif"
|
||||
7) "samsung,exynos5260-clock-mfc"
|
||||
8) "samsung,exynos5260-clock-g3d"
|
||||
9) "samsung,exynos5260-clock-fsys"
|
||||
10) "samsung,exynos5260-clock-aud"
|
||||
11) "samsung,exynos5260-clock-isp"
|
||||
12) "samsung,exynos5260-clock-gscl"
|
||||
13) "samsung,exynos5260-clock-disp"
|
||||
|
||||
- reg: physical base address of the controller and the length of
|
||||
memory mapped region.
|
||||
|
||||
- #clock-cells: should be 1.
|
||||
|
||||
- clocks: list of clock identifiers which are fed as the input to
|
||||
the given clock controller. Please refer the next section to find
|
||||
the input clocks for a given controller.
|
||||
|
||||
- clock-names: list of names of clocks which are fed as the input
|
||||
to the given clock controller.
|
||||
|
||||
Input clocks for top clock controller:
|
||||
- fin_pll
|
||||
- dout_mem_pll
|
||||
- dout_bus_pll
|
||||
- dout_media_pll
|
||||
|
||||
Input clocks for peri clock controller:
|
||||
- fin_pll
|
||||
- ioclk_pcm_extclk
|
||||
- ioclk_i2s_cdclk
|
||||
- ioclk_spdif_extclk
|
||||
- phyclk_hdmi_phy_ref_cko
|
||||
- dout_aclk_peri_66
|
||||
- dout_sclk_peri_uart0
|
||||
- dout_sclk_peri_uart1
|
||||
- dout_sclk_peri_uart2
|
||||
- dout_sclk_peri_spi0_b
|
||||
- dout_sclk_peri_spi1_b
|
||||
- dout_sclk_peri_spi2_b
|
||||
- dout_aclk_peri_aud
|
||||
- dout_sclk_peri_spi0_b
|
||||
|
||||
Input clocks for egl clock controller:
|
||||
- fin_pll
|
||||
- dout_bus_pll
|
||||
|
||||
Input clocks for kfc clock controller:
|
||||
- fin_pll
|
||||
- dout_media_pll
|
||||
|
||||
Input clocks for g2d clock controller:
|
||||
- fin_pll
|
||||
- dout_aclk_g2d_333
|
||||
|
||||
Input clocks for mif clock controller:
|
||||
- fin_pll
|
||||
|
||||
Input clocks for mfc clock controller:
|
||||
- fin_pll
|
||||
- dout_aclk_mfc_333
|
||||
|
||||
Input clocks for g3d clock controller:
|
||||
- fin_pll
|
||||
|
||||
Input clocks for fsys clock controller:
|
||||
- fin_pll
|
||||
- phyclk_usbhost20_phy_phyclock
|
||||
- phyclk_usbhost20_phy_freeclk
|
||||
- phyclk_usbhost20_phy_clk48mohci
|
||||
- phyclk_usbdrd30_udrd30_pipe_pclk
|
||||
- phyclk_usbdrd30_udrd30_phyclock
|
||||
- dout_aclk_fsys_200
|
||||
|
||||
Input clocks for aud clock controller:
|
||||
- fin_pll
|
||||
- fout_aud_pll
|
||||
- ioclk_i2s_cdclk
|
||||
- ioclk_pcm_extclk
|
||||
|
||||
Input clocks for isp clock controller:
|
||||
- fin_pll
|
||||
- dout_aclk_isp1_266
|
||||
- dout_aclk_isp1_400
|
||||
- mout_aclk_isp1_266
|
||||
|
||||
Input clocks for gscl clock controller:
|
||||
- fin_pll
|
||||
- dout_aclk_gscl_400
|
||||
- dout_aclk_gscl_333
|
||||
|
||||
Input clocks for disp clock controller:
|
||||
- fin_pll
|
||||
- phyclk_dptx_phy_ch3_txd_clk
|
||||
- phyclk_dptx_phy_ch2_txd_clk
|
||||
- phyclk_dptx_phy_ch1_txd_clk
|
||||
- phyclk_dptx_phy_ch0_txd_clk
|
||||
- phyclk_hdmi_phy_tmds_clko
|
||||
- phyclk_hdmi_phy_ref_clko
|
||||
- phyclk_hdmi_phy_pixel_clko
|
||||
- phyclk_hdmi_link_o_tmds_clkhi
|
||||
- phyclk_mipi_dphy_4l_m_txbyte_clkhs
|
||||
- phyclk_dptx_phy_o_ref_clk_24m
|
||||
- phyclk_dptx_phy_clk_div2
|
||||
- phyclk_mipi_dphy_4l_m_rxclkesc0
|
||||
- phyclk_hdmi_phy_ref_cko
|
||||
- ioclk_spdif_extclk
|
||||
- dout_aclk_peri_aud
|
||||
- dout_aclk_disp_222
|
||||
- dout_sclk_disp_pixel
|
||||
- dout_aclk_disp_333
|
||||
|
||||
Example 1: An example of a clock controller node is listed below.
|
||||
|
||||
clock_mfc: clock-controller@11090000 {
|
||||
compatible = "samsung,exynos5260-clock-mfc";
|
||||
clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
|
||||
clock-names = "fin_pll", "dout_aclk_mfc_333";
|
||||
reg = <0x11090000 0x10000>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
Example 2: UART controller node that consumes the clock generated by the
|
||||
peri clock controller. Refer to the standard clock bindings for
|
||||
information about 'clocks' and 'clock-names' property.
|
||||
|
||||
serial@12C00000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x12C00000 0x100>;
|
||||
interrupts = <0 146 0>;
|
||||
clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,45 @@
|
|||
* Samsung Exynos5410 Clock Controller
|
||||
|
||||
The Exynos5410 clock controller generates and supplies clock to various
|
||||
controllers within the Exynos5410 SoC.
|
||||
|
||||
Required Properties:
|
||||
|
||||
- compatible: should be "samsung,exynos5410-clock"
|
||||
|
||||
- reg: physical base address of the controller and length of memory mapped
|
||||
region.
|
||||
|
||||
- #clock-cells: should be 1.
|
||||
|
||||
All available clocks are defined as preprocessor macros in
|
||||
dt-bindings/clock/exynos5410.h header and can be used in device
|
||||
tree sources.
|
||||
|
||||
External clock:
|
||||
|
||||
There is clock that is generated outside the SoC. It
|
||||
is expected that it is defined using standard clock bindings
|
||||
with following clock-output-name:
|
||||
|
||||
- "fin_pll" - PLL input clock from XXTI
|
||||
|
||||
Example 1: An example of a clock controller node is listed below.
|
||||
|
||||
clock: clock-controller@0x10010000 {
|
||||
compatible = "samsung,exynos5410-clock";
|
||||
reg = <0x10010000 0x30000>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
Example 2: UART controller node that consumes the clock generated by the clock
|
||||
controller. Refer to the standard clock bindings for information
|
||||
about 'clocks' and 'clock-names' property.
|
||||
|
||||
serial@12C20000 {
|
||||
compatible = "samsung,exynos4210-uart";
|
||||
reg = <0x12C00000 0x100>;
|
||||
interrupts = <0 51 0>;
|
||||
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
|
@ -1,12 +1,13 @@
|
|||
* Samsung Exynos5420 Clock Controller
|
||||
|
||||
The Exynos5420 clock controller generates and supplies clock to various
|
||||
controllers within the Exynos5420 SoC.
|
||||
controllers within the Exynos5420 SoC and for the Exynos5800 SoC.
|
||||
|
||||
Required Properties:
|
||||
|
||||
- compatible: should be one of the following.
|
||||
- "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
|
||||
- "samsung,exynos5800-clock" - controller compatible with Exynos5800 SoC.
|
||||
|
||||
- reg: physical base address of the controller and length of memory mapped
|
||||
region.
|
||||
|
|
|
|||
|
|
@ -139,6 +139,9 @@ clocks and IDs.
|
|||
uart5_ipg 124
|
||||
reserved 125
|
||||
wdt_ipg 126
|
||||
cko_div 127
|
||||
cko_sel 128
|
||||
cko 129
|
||||
|
||||
Examples:
|
||||
|
||||
|
|
|
|||
|
|
@ -98,7 +98,12 @@ clocks and IDs.
|
|||
fpm 83
|
||||
mpll_osc_sel 84
|
||||
mpll_sel 85
|
||||
spll_gate 86
|
||||
spll_gate 86
|
||||
mshc_div 87
|
||||
rtic_ipg_gate 88
|
||||
mshc_ipg_gate 89
|
||||
rtic_ahb_gate 90
|
||||
mshc_baud_gate 91
|
||||
|
||||
Examples:
|
||||
|
||||
|
|
|
|||
|
|
@ -220,6 +220,7 @@ clocks and IDs.
|
|||
lvds2_sel 205
|
||||
lvds1_gate 206
|
||||
lvds2_gate 207
|
||||
esai_ahb 208
|
||||
|
||||
Examples:
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,13 @@
|
|||
* Clock bindings for Freescale i.MX6 SoloX
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "fsl,imx6sx-ccm"
|
||||
- reg: Address and length of the register set
|
||||
- #clock-cells: Should be <1>
|
||||
- clocks: list of clock specifiers, must contain an entry for each required
|
||||
entry in clock-names
|
||||
- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
|
||||
|
||||
The clock consumer should specify the desired clock by having the clock
|
||||
ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sx-clock.h
|
||||
for the full list of i.MX6 SoloX clock IDs.
|
||||
|
|
@ -19,7 +19,7 @@ to specify the clock which they consume. Some of the clocks are available only
|
|||
on a particular SoC.
|
||||
|
||||
All available clocks are defined as preprocessor macros in
|
||||
dt-bindings/clock/samsung,s3c2410-clock.h header and can be used in device
|
||||
dt-bindings/clock/s3c2410.h header and can be used in device
|
||||
tree sources.
|
||||
|
||||
External clocks:
|
||||
|
|
|
|||
|
|
@ -0,0 +1,20 @@
|
|||
Axxia Restart Driver
|
||||
|
||||
This driver can do reset of the Axxia SoC. It uses the registers in the syscon
|
||||
block to initiate a chip reset.
|
||||
|
||||
Required Properties:
|
||||
-compatible: "lsi,axm55xx-reset"
|
||||
-syscon: phandle to the syscon node.
|
||||
|
||||
Example:
|
||||
|
||||
syscon: syscon@2010030000 {
|
||||
compatible = "lsi,axxia-syscon", "syscon";
|
||||
reg = <0x20 0x10030000 0 0x2000>;
|
||||
};
|
||||
|
||||
reset: reset@2010031000 {
|
||||
compatible = "lsi,axm55xx-reset";
|
||||
syscon = <&syscon>;
|
||||
};
|
||||
|
|
@ -1617,12 +1617,6 @@ S: Supported
|
|||
F: drivers/misc/atmel_tclib.c
|
||||
F: drivers/clocksource/tcb_clksrc.c
|
||||
|
||||
ATMEL TSADCC DRIVER
|
||||
M: Josh Wu <josh.wu@atmel.com>
|
||||
L: linux-input@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/input/touchscreen/atmel_tsadcc.c
|
||||
|
||||
ATMEL USBA UDC DRIVER
|
||||
M: Nicolas Ferre <nicolas.ferre@atmel.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
|
|
|
|||
|
|
@ -377,7 +377,6 @@ config ARCH_AT91
|
|||
select ARCH_REQUIRE_GPIOLIB
|
||||
select CLKDEV_LOOKUP
|
||||
select IRQ_DOMAIN
|
||||
select NEED_MACH_GPIO_H
|
||||
select NEED_MACH_IO_H if PCCARD
|
||||
select PINCTRL
|
||||
select PINCTRL_AT91 if USE_OF
|
||||
|
|
@ -756,7 +755,7 @@ config ARCH_S3C64XX
|
|||
select ATAGS
|
||||
select CLKDEV_LOOKUP
|
||||
select CLKSRC_SAMSUNG_PWM
|
||||
select COMMON_CLK
|
||||
select COMMON_CLK_SAMSUNG
|
||||
select CPU_V6K
|
||||
select GENERIC_CLOCKEVENTS
|
||||
select GPIO_SAMSUNG
|
||||
|
|
@ -830,25 +829,6 @@ config ARCH_S5PV210
|
|||
help
|
||||
Samsung S5PV210/S5PC110 series based systems
|
||||
|
||||
config ARCH_EXYNOS
|
||||
bool "Samsung EXYNOS"
|
||||
select ARCH_HAS_CPUFREQ
|
||||
select ARCH_HAS_HOLES_MEMORYMODEL
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select ARCH_SPARSEMEM_ENABLE
|
||||
select ARM_GIC
|
||||
select COMMON_CLK
|
||||
select CPU_V7
|
||||
select GENERIC_CLOCKEVENTS
|
||||
select HAVE_S3C2410_I2C if I2C
|
||||
select HAVE_S3C2410_WATCHDOG if WATCHDOG
|
||||
select HAVE_S3C_RTC if RTC_CLASS
|
||||
select NEED_MACH_MEMORY_H
|
||||
select SPARSE_IRQ
|
||||
select USE_OF
|
||||
help
|
||||
Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
|
||||
|
||||
config ARCH_DAVINCI
|
||||
bool "TI DaVinci"
|
||||
select ARCH_HAS_HOLES_MEMORYMODEL
|
||||
|
|
@ -952,6 +932,8 @@ source "arch/arm/mach-mvebu/Kconfig"
|
|||
|
||||
source "arch/arm/mach-at91/Kconfig"
|
||||
|
||||
source "arch/arm/mach-axxia/Kconfig"
|
||||
|
||||
source "arch/arm/mach-bcm/Kconfig"
|
||||
|
||||
source "arch/arm/mach-berlin/Kconfig"
|
||||
|
|
|
|||
|
|
@ -317,6 +317,13 @@ choice
|
|||
Say Y here if you want kernel low-level debugging support
|
||||
on i.MX6SL.
|
||||
|
||||
config DEBUG_IMX6SX_UART
|
||||
bool "i.MX6SX Debug UART"
|
||||
depends on SOC_IMX6SX
|
||||
help
|
||||
Say Y here if you want kernel low-level debugging support
|
||||
on i.MX6SX.
|
||||
|
||||
config DEBUG_KEYSTONE_UART0
|
||||
bool "Kernel low-level debugging on KEYSTONE2 using UART0"
|
||||
depends on ARCH_KEYSTONE
|
||||
|
|
@ -349,56 +356,40 @@ choice
|
|||
Say Y here if you want kernel low-level debugging support
|
||||
on MMP UART3.
|
||||
|
||||
config DEBUG_MSM_UART1
|
||||
bool "Kernel low-level debugging messages via MSM UART1"
|
||||
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
|
||||
select DEBUG_MSM_UART
|
||||
config DEBUG_MSM_UART
|
||||
bool "Kernel low-level debugging messages via MSM UART"
|
||||
depends on ARCH_MSM
|
||||
help
|
||||
Say Y here if you want the debug print routines to direct
|
||||
their output to the first serial port on MSM devices.
|
||||
their output to the serial port on MSM devices.
|
||||
|
||||
config DEBUG_MSM_UART2
|
||||
bool "Kernel low-level debugging messages via MSM UART2"
|
||||
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
|
||||
select DEBUG_MSM_UART
|
||||
help
|
||||
Say Y here if you want the debug print routines to direct
|
||||
their output to the second serial port on MSM devices.
|
||||
ARCH DEBUG_UART_PHYS DEBUG_UART_BASE #
|
||||
MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1
|
||||
MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2
|
||||
MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3
|
||||
|
||||
config DEBUG_MSM_UART3
|
||||
bool "Kernel low-level debugging messages via MSM UART3"
|
||||
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
|
||||
select DEBUG_MSM_UART
|
||||
help
|
||||
Say Y here if you want the debug print routines to direct
|
||||
their output to the third serial port on MSM devices.
|
||||
MSM7X30 0xaca00000 0xe1000000 UART1
|
||||
MSM7X30 0xacb00000 0xe1000000 UART2
|
||||
MSM7X30 0xacc00000 0xe1000000 UART3
|
||||
|
||||
config DEBUG_MSM8660_UART
|
||||
bool "Kernel low-level debugging messages via MSM 8660 UART"
|
||||
depends on ARCH_MSM8X60
|
||||
select MSM_HAS_DEBUG_UART_HS
|
||||
select DEBUG_MSM_UART
|
||||
help
|
||||
Say Y here if you want the debug print routines to direct
|
||||
their output to the serial port on MSM 8660 devices.
|
||||
Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
|
||||
options based on your needs.
|
||||
|
||||
config DEBUG_MSM8960_UART
|
||||
bool "Kernel low-level debugging messages via MSM 8960 UART"
|
||||
depends on ARCH_MSM8960
|
||||
select MSM_HAS_DEBUG_UART_HS
|
||||
select DEBUG_MSM_UART
|
||||
config DEBUG_QCOM_UARTDM
|
||||
bool "Kernel low-level debugging messages via QCOM UARTDM"
|
||||
depends on ARCH_QCOM
|
||||
help
|
||||
Say Y here if you want the debug print routines to direct
|
||||
their output to the serial port on MSM 8960 devices.
|
||||
their output to the serial port on Qualcomm devices.
|
||||
|
||||
config DEBUG_MSM8974_UART
|
||||
bool "Kernel low-level debugging messages via MSM 8974 UART"
|
||||
depends on ARCH_MSM8974
|
||||
select MSM_HAS_DEBUG_UART_HS
|
||||
select DEBUG_MSM_UART
|
||||
help
|
||||
Say Y here if you want the debug print routines to direct
|
||||
their output to the serial port on MSM 8974 devices.
|
||||
ARCH DEBUG_UART_PHYS DEBUG_UART_BASE
|
||||
APQ8084 0xf995e000 0xfa75e000
|
||||
MSM8X60 0x19c40000 0xf0040000
|
||||
MSM8960 0x16440000 0xf0040000
|
||||
MSM8974 0xf991e000 0xfa71e000
|
||||
|
||||
Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
|
||||
options based on your needs.
|
||||
|
||||
config DEBUG_MVEBU_UART
|
||||
bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)"
|
||||
|
|
@ -972,13 +963,23 @@ config DEBUG_IMX_UART_PORT
|
|||
DEBUG_IMX51_UART || \
|
||||
DEBUG_IMX53_UART || \
|
||||
DEBUG_IMX6Q_UART || \
|
||||
DEBUG_IMX6SL_UART
|
||||
DEBUG_IMX6SL_UART || \
|
||||
DEBUG_IMX6SX_UART
|
||||
default 1
|
||||
depends on ARCH_MXC
|
||||
help
|
||||
Choose UART port on which kernel low-level debug messages
|
||||
should be output.
|
||||
|
||||
config DEBUG_VF_UART_PORT
|
||||
int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART
|
||||
default 1
|
||||
range 0 3
|
||||
depends on SOC_VF610
|
||||
help
|
||||
Choose UART port on which kernel low-level debug messages
|
||||
should be output.
|
||||
|
||||
config DEBUG_TEGRA_UART
|
||||
bool
|
||||
depends on ARCH_TEGRA
|
||||
|
|
@ -987,10 +988,6 @@ config DEBUG_STI_UART
|
|||
bool
|
||||
depends on ARCH_STI
|
||||
|
||||
config DEBUG_MSM_UART
|
||||
bool
|
||||
depends on ARCH_MSM || ARCH_QCOM
|
||||
|
||||
config DEBUG_LL_INCLUDE
|
||||
string
|
||||
default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
|
||||
|
|
@ -1007,8 +1004,9 @@ config DEBUG_LL_INCLUDE
|
|||
DEBUG_IMX51_UART || \
|
||||
DEBUG_IMX53_UART ||\
|
||||
DEBUG_IMX6Q_UART || \
|
||||
DEBUG_IMX6SL_UART
|
||||
default "debug/msm.S" if DEBUG_MSM_UART
|
||||
DEBUG_IMX6SL_UART || \
|
||||
DEBUG_IMX6SX_UART
|
||||
default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
|
||||
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
|
||||
default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
|
||||
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
|
||||
|
|
@ -1079,6 +1077,7 @@ config DEBUG_UART_PHYS
|
|||
default 0x80230000 if DEBUG_PICOXCELL_UART
|
||||
default 0x808c0000 if ARCH_EP93XX
|
||||
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
|
||||
default 0xa9a00000 if DEBUG_MSM_UART
|
||||
default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
|
||||
default 0xc0013000 if DEBUG_U300_UART
|
||||
default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
|
||||
|
|
@ -1094,6 +1093,7 @@ config DEBUG_UART_PHYS
|
|||
ARCH_ORION5X
|
||||
default 0xf7fc9000 if DEBUG_BERLIN_UART
|
||||
default 0xf8b00000 if DEBUG_HI3716_UART
|
||||
default 0xf991e000 if DEBUG_QCOM_UARTDM
|
||||
default 0xfcb00000 if DEBUG_HI3620_UART
|
||||
default 0xfe800000 if ARCH_IOP32X
|
||||
default 0xffc02000 if DEBUG_SOCFPGA_UART
|
||||
|
|
@ -1102,11 +1102,13 @@ config DEBUG_UART_PHYS
|
|||
default 0xfffff700 if ARCH_IOP33X
|
||||
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
|
||||
DEBUG_LL_UART_EFM32 || \
|
||||
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART
|
||||
DEBUG_UART_8250 || DEBUG_UART_PL01X || \
|
||||
DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
|
||||
|
||||
config DEBUG_UART_VIRT
|
||||
hex "Virtual base address of debug UART"
|
||||
default 0xe0010fe0 if ARCH_RPC
|
||||
default 0xe1000000 if DEBUG_MSM_UART
|
||||
default 0xf0000be0 if ARCH_EBSA110
|
||||
default 0xf0009000 if DEBUG_CNS3XXX
|
||||
default 0xf01fb000 if DEBUG_NOMADIK_UART
|
||||
|
|
@ -1128,6 +1130,7 @@ config DEBUG_UART_VIRT
|
|||
default 0xf7fc9000 if DEBUG_BERLIN_UART
|
||||
default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
|
||||
default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
|
||||
default 0xfa71e000 if DEBUG_QCOM_UARTDM
|
||||
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
|
||||
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
|
||||
default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
|
||||
|
|
@ -1166,7 +1169,8 @@ config DEBUG_UART_VIRT
|
|||
default 0xff003000 if DEBUG_U300_UART
|
||||
default DEBUG_UART_PHYS if !MMU
|
||||
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
|
||||
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART
|
||||
DEBUG_UART_8250 || DEBUG_UART_PL01X || \
|
||||
DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
|
||||
|
||||
config DEBUG_UART_8250_SHIFT
|
||||
int "Register offset shift for the 8250 debug UART"
|
||||
|
|
|
|||
|
|
@ -138,10 +138,12 @@ endif
|
|||
textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
|
||||
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
|
||||
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
|
||||
textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
|
||||
|
||||
# Machine directory name. This list is sorted alphanumerically
|
||||
# by CONFIG_* macro name.
|
||||
machine-$(CONFIG_ARCH_AT91) += at91
|
||||
machine-$(CONFIG_ARCH_AXXIA) += axxia
|
||||
machine-$(CONFIG_ARCH_BCM) += bcm
|
||||
machine-$(CONFIG_ARCH_BERLIN) += berlin
|
||||
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
|
||||
|
|
|
|||
|
|
@ -50,6 +50,7 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
|
|||
dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb
|
||||
|
||||
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
|
||||
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
|
||||
dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
|
||||
dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
|
||||
|
|
@ -73,6 +74,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
|
|||
exynos5250-smdk5250.dtb \
|
||||
exynos5250-snow.dtb \
|
||||
exynos5420-arndale-octa.dtb \
|
||||
exynos5420-peach-pit.dtb \
|
||||
exynos5420-smdk5420.dtb \
|
||||
exynos5440-sd5v1.dtb \
|
||||
exynos5440-ssdk5440.dtb
|
||||
|
|
@ -289,7 +291,10 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
|
|||
am43x-epos-evm.dtb \
|
||||
am437x-gp-evm.dtb \
|
||||
dra7-evm.dtb
|
||||
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
|
||||
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
|
||||
orion5x-lacie-ethernet-disk-mini-v2.dtb \
|
||||
orion5x-maxtor-shared-storage-2.dtb \
|
||||
orion5x-rd88f5182-nas.dtb
|
||||
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
|
||||
qcom-msm8960-cdp.dtb \
|
||||
|
|
@ -297,8 +302,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
|
|||
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
|
||||
dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
|
||||
s3c6410-smdk6410.dtb
|
||||
dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
|
||||
r7s72100-genmai.dtb \
|
||||
dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
|
||||
r7s72100-genmai-reference.dtb \
|
||||
r8a7740-armadillo800eva.dtb \
|
||||
r8a7778-bockw.dtb \
|
||||
|
|
|
|||
|
|
@ -32,11 +32,6 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
tsadcc: tsadcc@f804c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
rtc@fffffeb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -21,6 +21,14 @@
|
|||
reg = <0x20000000 0x10000000>;
|
||||
};
|
||||
|
||||
slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
mmc0: mmc@f0000000 {
|
||||
|
|
|
|||
|
|
@ -45,6 +45,18 @@
|
|||
reg = <0x20000000 0x08000000>;
|
||||
};
|
||||
|
||||
main_xtal: main_xtal {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
slow_xtal: slow_xtal {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
ahb {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
|
|
@ -524,17 +536,24 @@
|
|||
#size-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
clk32k: slck {
|
||||
slow_rc_osc: slow_rc_osc {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-accuracy = <50000000>;
|
||||
};
|
||||
|
||||
clk32k: slck {
|
||||
compatible = "atmel,at91sam9260-clk-slow";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&slow_rc_osc &slow_xtal>;
|
||||
};
|
||||
|
||||
main: mainck {
|
||||
compatible = "atmel,at91rm9200-clk-main";
|
||||
#clock-cells = <0>;
|
||||
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
|
||||
clocks = <&clk32k>;
|
||||
clocks = <&main_xtal>;
|
||||
};
|
||||
|
||||
plla: pllack {
|
||||
|
|
|
|||
|
|
@ -20,6 +20,10 @@
|
|||
reg = <0x20000000 0x4000000>;
|
||||
};
|
||||
|
||||
main_xtal {
|
||||
clock-frequency = <18432000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -48,6 +48,18 @@
|
|||
reg = <0x20000000 0x04000000>;
|
||||
};
|
||||
|
||||
slow_xtal: slow_xtal {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
main_xtal: main_xtal {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
ahb {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
|
|
@ -548,17 +560,11 @@
|
|||
#size-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
clk32k: slck {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
main: mainck {
|
||||
compatible = "atmel,at91rm9200-clk-main";
|
||||
#clock-cells = <0>;
|
||||
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
|
||||
clocks = <&clk32k>;
|
||||
clocks = <&main_xtal>;
|
||||
};
|
||||
|
||||
plla: pllack {
|
||||
|
|
@ -769,6 +775,32 @@
|
|||
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sckc@fffffd50 {
|
||||
compatible = "atmel,at91sam9x5-sckc";
|
||||
reg = <0xfffffd50 0x4>;
|
||||
|
||||
slow_osc: slow_osc {
|
||||
compatible = "atmel,at91sam9x5-clk-slow-osc";
|
||||
#clock-cells = <0>;
|
||||
atmel,startup-time-usec = <1200000>;
|
||||
clocks = <&slow_xtal>;
|
||||
};
|
||||
|
||||
slow_rc_osc: slow_rc_osc {
|
||||
compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
|
||||
#clock-cells = <0>;
|
||||
atmel,startup-time-usec = <75>;
|
||||
clock-frequency = <32768>;
|
||||
clock-accuracy = <50000000>;
|
||||
};
|
||||
|
||||
clk32k: slck {
|
||||
compatible = "atmel,at91sam9x5-clk-slow";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&slow_rc_osc &slow_osc>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -20,6 +20,15 @@
|
|||
reg = <0x20000000 0x4000000>;
|
||||
};
|
||||
|
||||
|
||||
slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,51 @@
|
|||
/*
|
||||
* arch/arm/boot/dts/axm5516-amarillo.dts
|
||||
*
|
||||
* Copyright (C) 2013 LSI
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/memreserve/ 0x00000000 0x00400000;
|
||||
|
||||
#include "axm55xx.dtsi"
|
||||
#include "axm5516-cpus.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Amarillo AXM5516";
|
||||
compatible = "lsi,axm5516-amarillo", "lsi,axm5516";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0 0x00000000 0x02 0x00000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&serial0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&serial1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&serial2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&serial3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,204 @@
|
|||
/*
|
||||
* arch/arm/boot/dts/axm5516-cpus.dtsi
|
||||
*
|
||||
* Copyright (C) 2013 LSI
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
/ {
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu-map {
|
||||
cluster0 {
|
||||
core0 {
|
||||
cpu = <&CPU0>;
|
||||
};
|
||||
core1 {
|
||||
cpu = <&CPU1>;
|
||||
};
|
||||
core2 {
|
||||
cpu = <&CPU2>;
|
||||
};
|
||||
core3 {
|
||||
cpu = <&CPU3>;
|
||||
};
|
||||
};
|
||||
cluster1 {
|
||||
core0 {
|
||||
cpu = <&CPU4>;
|
||||
};
|
||||
core1 {
|
||||
cpu = <&CPU5>;
|
||||
};
|
||||
core2 {
|
||||
cpu = <&CPU6>;
|
||||
};
|
||||
core3 {
|
||||
cpu = <&CPU7>;
|
||||
};
|
||||
};
|
||||
cluster2 {
|
||||
core0 {
|
||||
cpu = <&CPU8>;
|
||||
};
|
||||
core1 {
|
||||
cpu = <&CPU9>;
|
||||
};
|
||||
core2 {
|
||||
cpu = <&CPU10>;
|
||||
};
|
||||
core3 {
|
||||
cpu = <&CPU11>;
|
||||
};
|
||||
};
|
||||
cluster3 {
|
||||
core0 {
|
||||
cpu = <&CPU12>;
|
||||
};
|
||||
core1 {
|
||||
cpu = <&CPU13>;
|
||||
};
|
||||
core2 {
|
||||
cpu = <&CPU14>;
|
||||
};
|
||||
core3 {
|
||||
cpu = <&CPU15>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
CPU0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x00>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU1: cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x01>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU2: cpu@2 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x02>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU3: cpu@3 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x03>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU4: cpu@100 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x100>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU5: cpu@101 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x101>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU6: cpu@102 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x102>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU7: cpu@103 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x103>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU8: cpu@200 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x200>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU9: cpu@201 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x201>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU10: cpu@202 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x202>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU11: cpu@203 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x203>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU12: cpu@300 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x300>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU13: cpu@301 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x301>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU14: cpu@302 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x302>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
|
||||
CPU15: cpu@303 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0x303>;
|
||||
clock-frequency= <1400000000>;
|
||||
cpu-release-addr = <0>; // Fixed by the boot loader
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,204 @@
|
|||
/*
|
||||
* arch/arm/boot/dts/axm55xx.dtsi
|
||||
*
|
||||
* Copyright (C) 2013 LSI
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/lsi,axm5516-clks.h>
|
||||
|
||||
#include "skeleton64.dtsi"
|
||||
|
||||
/ {
|
||||
interrupt-parent = <&gic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
serial2 = &serial2;
|
||||
serial3 = &serial3;
|
||||
timer = &timer0;
|
||||
};
|
||||
|
||||
clocks {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
clk_ref0: clk_ref0 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <125000000>;
|
||||
};
|
||||
|
||||
clk_ref1: clk_ref1 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <125000000>;
|
||||
};
|
||||
|
||||
clk_ref2: clk_ref2 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <125000000>;
|
||||
};
|
||||
|
||||
clks: clock-controller@2010020000 {
|
||||
compatible = "lsi,axm5516-clks";
|
||||
#clock-cells = <1>;
|
||||
reg = <0x20 0x10020000 0 0x20000>;
|
||||
};
|
||||
};
|
||||
|
||||
gic: interrupt-controller@2001001000 {
|
||||
compatible = "arm,cortex-a15-gic";
|
||||
#interrupt-cells = <3>;
|
||||
#address-cells = <0>;
|
||||
interrupt-controller;
|
||||
reg = <0x20 0x01001000 0 0x1000>,
|
||||
<0x20 0x01002000 0 0x1000>,
|
||||
<0x20 0x01004000 0 0x2000>,
|
||||
<0x20 0x01006000 0 0x2000>;
|
||||
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
|
||||
IRQ_TYPE_LEVEL_HIGH)>;
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv7-timer";
|
||||
interrupts =
|
||||
<GIC_PPI 13
|
||||
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 14
|
||||
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 11
|
||||
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 10
|
||||
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
||||
};
|
||||
|
||||
|
||||
pmu {
|
||||
compatible = "arm,cortex-a15-pmu";
|
||||
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
soc {
|
||||
compatible = "simple-bus";
|
||||
device_type = "soc";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&gic>;
|
||||
ranges;
|
||||
|
||||
syscon: syscon@2010030000 {
|
||||
compatible = "lsi,axxia-syscon", "syscon";
|
||||
reg = <0x20 0x10030000 0 0x2000>;
|
||||
};
|
||||
|
||||
reset: reset@2010031000 {
|
||||
compatible = "lsi,axm55xx-reset";
|
||||
syscon = <&syscon>;
|
||||
};
|
||||
|
||||
amba {
|
||||
compatible = "arm,amba-bus";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
serial0: uart@2010080000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x20 0x10080000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks AXXIA_CLK_PER>;
|
||||
clock-names = "apb_pclk";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial1: uart@2010081000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x20 0x10081000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks AXXIA_CLK_PER>;
|
||||
clock-names = "apb_pclk";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial2: uart@2010082000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x20 0x10082000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks AXXIA_CLK_PER>;
|
||||
clock-names = "apb_pclk";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial3: uart@2010083000 {
|
||||
compatible = "arm,pl011", "arm,primecell";
|
||||
reg = <0x20 0x10083000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks AXXIA_CLK_PER>;
|
||||
clock-names = "apb_pclk";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer0: timer@2010091000 {
|
||||
compatible = "arm,sp804", "arm,primecell";
|
||||
reg = <0x20 0x10091000 0 0x1000>;
|
||||
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks AXXIA_CLK_PER>;
|
||||
clock-names = "apb_pclk";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
gpio0: gpio@2010092000 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "arm,pl061", "arm,primecell";
|
||||
gpio-controller;
|
||||
reg = <0x20 0x10092000 0x00 0x1000>;
|
||||
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks AXXIA_CLK_PER>;
|
||||
clock-names = "apb_pclk";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio1: gpio@2010093000 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "arm,pl061", "arm,primecell";
|
||||
gpio-controller;
|
||||
reg = <0x20 0x10093000 0x00 0x1000>;
|
||||
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&clks AXXIA_CLK_PER>;
|
||||
clock-names = "apb_pclk";
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
Local Variables:
|
||||
mode: C
|
||||
End:
|
||||
*/
|
||||
|
|
@ -129,12 +129,10 @@
|
|||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "cam_a_clkout", "cam_b_clkout";
|
||||
ranges;
|
||||
|
||||
clock_cam: clock-controller {
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
fimc_0: fimc@11800000 {
|
||||
compatible = "samsung,exynos4210-fimc";
|
||||
reg = <0x11800000 0x1000>;
|
||||
|
|
@ -371,6 +369,8 @@
|
|||
interrupts = <0 60 0>;
|
||||
clocks = <&clock CLK_I2C2>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -382,6 +382,8 @@
|
|||
interrupts = <0 61 0>;
|
||||
clocks = <&clock CLK_I2C3>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -393,6 +395,8 @@
|
|||
interrupts = <0 62 0>;
|
||||
clocks = <&clock CLK_I2C4>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -404,6 +408,8 @@
|
|||
interrupts = <0 63 0>;
|
||||
clocks = <&clock CLK_I2C5>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -415,6 +421,8 @@
|
|||
interrupts = <0 64 0>;
|
||||
clocks = <&clock CLK_I2C6>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c6_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -426,6 +434,8 @@
|
|||
interrupts = <0 65 0>;
|
||||
clocks = <&clock CLK_I2C7>;
|
||||
clock-names = "i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c7_bus>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -28,6 +28,21 @@
|
|||
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
|
||||
};
|
||||
|
||||
sysram@02020000 {
|
||||
smp-sysram@0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
smp-sysram@5000 {
|
||||
compatible = "samsung,exynos4210-sysram";
|
||||
reg = <0x5000 0x1000>;
|
||||
};
|
||||
|
||||
smp-sysram@1f000 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
mct@10050000 {
|
||||
compatible = "none";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -31,6 +31,24 @@
|
|||
pinctrl2 = &pinctrl_2;
|
||||
};
|
||||
|
||||
sysram@02020000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x02020000 0x20000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x02020000 0x20000>;
|
||||
|
||||
smp-sysram@0 {
|
||||
compatible = "samsung,exynos4210-sysram";
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
smp-sysram@1f000 {
|
||||
compatible = "samsung,exynos4210-sysram-ns";
|
||||
reg = <0x1f000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
pd_lcd1: lcd1-power-domain@10023CA0 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10023CA0 0x20>;
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@
|
|||
compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
|
||||
|
||||
aliases {
|
||||
i2c8 = &i2c_ak8975;
|
||||
i2c9 = &i2c_ak8975;
|
||||
};
|
||||
|
||||
memory {
|
||||
|
|
@ -80,7 +80,24 @@
|
|||
enable-active-high;
|
||||
};
|
||||
|
||||
/* More to come */
|
||||
cam_af_reg: voltage-regulator-3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "CAM_AF";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
gpio = <&gpm0 4 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
cam_isp_core_reg: voltage-regulator-4 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "CAM_ISP_CORE_1.2V_EN";
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
gpio = <&gpm0 3 0>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
|
|
@ -140,6 +157,38 @@
|
|||
};
|
||||
};
|
||||
|
||||
i2c_0: i2c@13860000 {
|
||||
samsung,i2c-sda-delay = <100>;
|
||||
samsung,i2c-slave-addr = <0x10>;
|
||||
samsung,i2c-max-bus-freq = <400000>;
|
||||
pinctrl-0 = <&i2c0_bus>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
s5c73m3@3c {
|
||||
compatible = "samsung,s5c73m3";
|
||||
reg = <0x3c>;
|
||||
standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */
|
||||
xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
|
||||
vdd-int-supply = <&buck9_reg>;
|
||||
vddio-cis-supply = <&ldo9_reg>;
|
||||
vdda-supply = <&ldo17_reg>;
|
||||
vddio-host-supply = <&ldo18_reg>;
|
||||
vdd-af-supply = <&cam_af_reg>;
|
||||
vdd-reg-supply = <&cam_io_reg>;
|
||||
clock-frequency = <24000000>;
|
||||
/* CAM_A_CLKOUT */
|
||||
clocks = <&camera 0>;
|
||||
clock-names = "cis_extclk";
|
||||
port {
|
||||
s5c73m3_ep: endpoint {
|
||||
remote-endpoint = <&csis0_ep>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c@138D0000 {
|
||||
samsung,i2c-sda-delay = <100>;
|
||||
samsung,i2c-slave-addr = <0x10>;
|
||||
|
|
@ -586,8 +635,8 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
camera {
|
||||
pinctrl-0 = <&cam_port_b_clk_active>;
|
||||
camera: camera {
|
||||
pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
|
|
@ -607,6 +656,23 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
csis_0: csis@11880000 {
|
||||
status = "okay";
|
||||
vddcore-supply = <&ldo8_reg>;
|
||||
vddio-supply = <&ldo10_reg>;
|
||||
clock-frequency = <176000000>;
|
||||
|
||||
/* Camera C (3) MIPI CSI-2 (CSIS0) */
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
csis0_ep: endpoint {
|
||||
remote-endpoint = <&s5c73m3_ep>;
|
||||
data-lanes = <1 2 3 4>;
|
||||
samsung,csis-hs-settle = <12>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
csis_1: csis@11890000 {
|
||||
vddcore-supply = <&ldo8_reg>;
|
||||
vddio-supply = <&ldo10_reg>;
|
||||
|
|
@ -647,10 +713,11 @@
|
|||
reg = <0x10>;
|
||||
svdda-supply = <&cam_io_reg>;
|
||||
svddio-supply = <&ldo19_reg>;
|
||||
afvdd-supply = <&ldo19_reg>;
|
||||
clock-frequency = <24000000>;
|
||||
/* CAM_B_CLKOUT */
|
||||
clocks = <&clock_cam 1>;
|
||||
clock-names = "mclk";
|
||||
clocks = <&camera 1>;
|
||||
clock-names = "extclk";
|
||||
samsung,camclk-out = <1>;
|
||||
gpios = <&gpm1 6 0>;
|
||||
|
||||
|
|
|
|||
|
|
@ -37,6 +37,24 @@
|
|||
interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
|
||||
};
|
||||
|
||||
sysram@02020000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x02020000 0x40000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x02020000 0x40000>;
|
||||
|
||||
smp-sysram@0 {
|
||||
compatible = "samsung,exynos4210-sysram";
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
smp-sysram@2f000 {
|
||||
compatible = "samsung,exynos4210-sysram-ns";
|
||||
reg = <0x2f000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
pd_isp: isp-power-domain@10023CA0 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10023CA0 0x20>;
|
||||
|
|
|
|||
|
|
@ -72,6 +72,24 @@
|
|||
};
|
||||
};
|
||||
|
||||
sysram@02020000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x02020000 0x30000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x02020000 0x30000>;
|
||||
|
||||
smp-sysram@0 {
|
||||
compatible = "samsung,exynos4210-sysram";
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
smp-sysram@2f000 {
|
||||
compatible = "samsung,exynos4210-sysram-ns";
|
||||
reg = <0x2f000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
pd_gsc: gsc-power-domain@10044000 {
|
||||
compatible = "samsung,exynos4210-pd";
|
||||
reg = <0x10044000 0x20>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,147 @@
|
|||
/*
|
||||
* Google Peach Pit Rev 6+ board device tree source
|
||||
*
|
||||
* Copyright (c) 2014 Google, Inc
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "exynos5420.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Google Peach Pit Rev 6+";
|
||||
|
||||
compatible = "google,pit-rev16",
|
||||
"google,pit-rev15", "google,pit-rev14",
|
||||
"google,pit-rev13", "google,pit-rev12",
|
||||
"google,pit-rev11", "google,pit-rev10",
|
||||
"google,pit-rev9", "google,pit-rev8",
|
||||
"google,pit-rev7", "google,pit-rev6",
|
||||
"google,pit", "google,peach","samsung,exynos5420",
|
||||
"samsung,exynos5";
|
||||
|
||||
memory {
|
||||
reg = <0x20000000 0x80000000>;
|
||||
};
|
||||
|
||||
fixed-rate-clocks {
|
||||
oscclk {
|
||||
compatible = "samsung,exynos5420-oscclk";
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&power_key_irq>;
|
||||
|
||||
power {
|
||||
label = "Power";
|
||||
gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_POWER>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 0 1000000 0>;
|
||||
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
|
||||
default-brightness-level = <7>;
|
||||
pinctrl-0 = <&pwm0_out>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_0 {
|
||||
tpm_irq: tpm-irq {
|
||||
samsung,pins = "gpx1-0";
|
||||
samsung,pin-function = <0>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
power_key_irq: power-key-irq {
|
||||
samsung,pins = "gpx1-2";
|
||||
samsung,pin-function = <0>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart_3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc_0 {
|
||||
status = "okay";
|
||||
num-slots = <1>;
|
||||
broken-cd;
|
||||
caps2-mmc-hs200-1_8v;
|
||||
supports-highspeed;
|
||||
non-removable;
|
||||
card-detect-delay = <200>;
|
||||
clock-frequency = <400000000>;
|
||||
samsung,dw-mshc-ciu-div = <3>;
|
||||
samsung,dw-mshc-sdr-timing = <0 4>;
|
||||
samsung,dw-mshc-ddr-timing = <0 2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
|
||||
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc_2 {
|
||||
status = "okay";
|
||||
num-slots = <1>;
|
||||
supports-highspeed;
|
||||
card-detect-delay = <200>;
|
||||
clock-frequency = <400000000>;
|
||||
samsung,dw-mshc-ciu-div = <3>;
|
||||
samsung,dw-mshc-sdr-timing = <2 3>;
|
||||
samsung,dw-mshc-ddr-timing = <1 2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
|
||||
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&hsi2c_9 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tpm@20 {
|
||||
compatible = "infineon,slb9645tt";
|
||||
reg = <0x20>;
|
||||
|
||||
/* Unused irq; but still need to configure the pins */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tpm_irq>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* Use longest HW watchdog in SoC (32 seconds) since the hardware
|
||||
* watchdog provides no debugging information (compared to soft/hard
|
||||
* lockup detectors) and so should be last resort.
|
||||
*/
|
||||
&watchdog {
|
||||
timeout-sec = <32>;
|
||||
};
|
||||
|
|
@ -624,6 +624,34 @@
|
|||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pwm0_out: pwm0-out {
|
||||
samsung,pins = "gpb2-0";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pwm1_out: pwm1-out {
|
||||
samsung,pins = "gpb2-1";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pwm2_out: pwm2-out {
|
||||
samsung,pins = "gpb2-2";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
pwm3_out: pwm3-out {
|
||||
samsung,pins = "gpb2-3";
|
||||
samsung,pin-function = <2>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
i2c7_hs_bus: i2c7-hs-bus {
|
||||
samsung,pins = "gpb2-2", "gpb2-3";
|
||||
samsung,pin-function = <3>;
|
||||
|
|
|
|||
|
|
@ -58,6 +58,7 @@
|
|||
compatible = "arm,cortex-a15";
|
||||
reg = <0x0>;
|
||||
clock-frequency = <1800000000>;
|
||||
cci-control-port = <&cci_control1>;
|
||||
};
|
||||
|
||||
cpu1: cpu@1 {
|
||||
|
|
@ -65,6 +66,7 @@
|
|||
compatible = "arm,cortex-a15";
|
||||
reg = <0x1>;
|
||||
clock-frequency = <1800000000>;
|
||||
cci-control-port = <&cci_control1>;
|
||||
};
|
||||
|
||||
cpu2: cpu@2 {
|
||||
|
|
@ -72,6 +74,7 @@
|
|||
compatible = "arm,cortex-a15";
|
||||
reg = <0x2>;
|
||||
clock-frequency = <1800000000>;
|
||||
cci-control-port = <&cci_control1>;
|
||||
};
|
||||
|
||||
cpu3: cpu@3 {
|
||||
|
|
@ -79,6 +82,7 @@
|
|||
compatible = "arm,cortex-a15";
|
||||
reg = <0x3>;
|
||||
clock-frequency = <1800000000>;
|
||||
cci-control-port = <&cci_control1>;
|
||||
};
|
||||
|
||||
cpu4: cpu@100 {
|
||||
|
|
@ -86,6 +90,7 @@
|
|||
compatible = "arm,cortex-a7";
|
||||
reg = <0x100>;
|
||||
clock-frequency = <1000000000>;
|
||||
cci-control-port = <&cci_control0>;
|
||||
};
|
||||
|
||||
cpu5: cpu@101 {
|
||||
|
|
@ -93,6 +98,7 @@
|
|||
compatible = "arm,cortex-a7";
|
||||
reg = <0x101>;
|
||||
clock-frequency = <1000000000>;
|
||||
cci-control-port = <&cci_control0>;
|
||||
};
|
||||
|
||||
cpu6: cpu@102 {
|
||||
|
|
@ -100,6 +106,7 @@
|
|||
compatible = "arm,cortex-a7";
|
||||
reg = <0x102>;
|
||||
clock-frequency = <1000000000>;
|
||||
cci-control-port = <&cci_control0>;
|
||||
};
|
||||
|
||||
cpu7: cpu@103 {
|
||||
|
|
@ -107,6 +114,44 @@
|
|||
compatible = "arm,cortex-a7";
|
||||
reg = <0x103>;
|
||||
clock-frequency = <1000000000>;
|
||||
cci-control-port = <&cci_control0>;
|
||||
};
|
||||
};
|
||||
|
||||
cci@10d20000 {
|
||||
compatible = "arm,cci-400";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x10d20000 0x1000>;
|
||||
ranges = <0x0 0x10d20000 0x6000>;
|
||||
|
||||
cci_control0: slave-if@4000 {
|
||||
compatible = "arm,cci-400-ctrl-if";
|
||||
interface-type = "ace";
|
||||
reg = <0x4000 0x1000>;
|
||||
};
|
||||
cci_control1: slave-if@5000 {
|
||||
compatible = "arm,cci-400-ctrl-if";
|
||||
interface-type = "ace";
|
||||
reg = <0x5000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
sysram@02020000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x02020000 0x54000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x02020000 0x54000>;
|
||||
|
||||
smp-sysram@0 {
|
||||
compatible = "samsung,exynos4210-sysram";
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
smp-sysram@53000 {
|
||||
compatible = "samsung,exynos4210-sysram-ns";
|
||||
reg = <0x53000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -125,7 +170,7 @@
|
|||
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
|
||||
};
|
||||
|
||||
codec@11000000 {
|
||||
mfc: codec@11000000 {
|
||||
compatible = "samsung,mfc-v7";
|
||||
reg = <0x11000000 0x10000>;
|
||||
interrupts = <0 96 0>;
|
||||
|
|
@ -169,7 +214,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
mct@101C0000 {
|
||||
mct: mct@101C0000 {
|
||||
compatible = "samsung,exynos4210-mct";
|
||||
reg = <0x101C0000 0x800>;
|
||||
interrupt-controller;
|
||||
|
|
@ -260,7 +305,7 @@
|
|||
interrupts = <0 47 0>;
|
||||
};
|
||||
|
||||
rtc@101E0000 {
|
||||
rtc: rtc@101E0000 {
|
||||
clocks = <&clock CLK_RTC>;
|
||||
clock-names = "rtc";
|
||||
status = "disabled";
|
||||
|
|
@ -427,22 +472,22 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@12C00000 {
|
||||
uart_0: serial@12C00000 {
|
||||
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
serial@12C10000 {
|
||||
uart_1: serial@12C10000 {
|
||||
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
serial@12C20000 {
|
||||
uart_2: serial@12C20000 {
|
||||
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
||||
serial@12C30000 {
|
||||
uart_3: serial@12C30000 {
|
||||
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
|
||||
clock-names = "uart", "clk_uart_baud0";
|
||||
};
|
||||
|
|
@ -462,14 +507,14 @@
|
|||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
dp-controller@145B0000 {
|
||||
dp: dp-controller@145B0000 {
|
||||
clocks = <&clock CLK_DP1>;
|
||||
clock-names = "dp";
|
||||
phys = <&dp_phy>;
|
||||
phy-names = "dp";
|
||||
};
|
||||
|
||||
fimd@14400000 {
|
||||
fimd: fimd@14400000 {
|
||||
samsung,power-domain = <&disp_pd>;
|
||||
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
|
||||
clock-names = "sclk_fimd", "fimd";
|
||||
|
|
@ -546,7 +591,7 @@
|
|||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c4_hs_bus>;
|
||||
clocks = <&clock CLK_I2C4>;
|
||||
clocks = <&clock CLK_USI0>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -559,7 +604,7 @@
|
|||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c5_hs_bus>;
|
||||
clocks = <&clock CLK_I2C5>;
|
||||
clocks = <&clock CLK_USI1>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -572,7 +617,7 @@
|
|||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c6_hs_bus>;
|
||||
clocks = <&clock CLK_I2C6>;
|
||||
clocks = <&clock CLK_USI2>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -585,7 +630,7 @@
|
|||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c7_hs_bus>;
|
||||
clocks = <&clock CLK_I2C7>;
|
||||
clocks = <&clock CLK_USI3>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -598,7 +643,7 @@
|
|||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c8_hs_bus>;
|
||||
clocks = <&clock CLK_I2C8>;
|
||||
clocks = <&clock CLK_USI4>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -611,7 +656,7 @@
|
|||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c9_hs_bus>;
|
||||
clocks = <&clock CLK_I2C9>;
|
||||
clocks = <&clock CLK_USI5>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -624,12 +669,12 @@
|
|||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c10_hs_bus>;
|
||||
clocks = <&clock CLK_I2C10>;
|
||||
clocks = <&clock CLK_USI6>;
|
||||
clock-names = "hsi2c";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
hdmi@14530000 {
|
||||
hdmi: hdmi@14530000 {
|
||||
compatible = "samsung,exynos4212-hdmi";
|
||||
reg = <0x14530000 0x70000>;
|
||||
interrupts = <0 95 0>;
|
||||
|
|
@ -641,7 +686,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
mixer@14450000 {
|
||||
mixer: mixer@14450000 {
|
||||
compatible = "samsung,exynos5420-mixer";
|
||||
reg = <0x14450000 0x10000>;
|
||||
interrupts = <0 94 0>;
|
||||
|
|
@ -712,7 +757,7 @@
|
|||
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
|
||||
};
|
||||
|
||||
watchdog@101D0000 {
|
||||
watchdog: watchdog@101D0000 {
|
||||
compatible = "samsung,exynos5420-wdt";
|
||||
reg = <0x101D0000 0x100>;
|
||||
interrupts = <0 42 0>;
|
||||
|
|
@ -721,7 +766,7 @@
|
|||
samsung,syscon-phandle = <&pmu_system_controller>;
|
||||
};
|
||||
|
||||
sss@10830000 {
|
||||
sss: sss@10830000 {
|
||||
compatible = "samsung,exynos4210-secss";
|
||||
reg = <0x10830000 0x10000>;
|
||||
interrupts = <0 112 0>;
|
||||
|
|
|
|||
|
|
@ -89,7 +89,16 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3_pins>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -234,6 +234,10 @@
|
|||
};
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
|
||||
};
|
||||
|
||||
&usb_otg_hs {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&musb_pins>;
|
||||
|
|
|
|||
|
|
@ -21,6 +21,17 @@
|
|||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
heartbeat {
|
||||
label = "debug::sleep";
|
||||
gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */
|
||||
linux,default-trigger = "default-on";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&debug_leds>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
|
|
@ -130,6 +141,12 @@
|
|||
>;
|
||||
};
|
||||
|
||||
debug_leds: pinmux_debug_led_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_pins: pinmux_mmc1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
|
||||
|
|
@ -618,11 +635,13 @@
|
|||
};
|
||||
|
||||
&uart2 {
|
||||
interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3_pins>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -267,7 +267,7 @@
|
|||
uart1: serial@4806a000 {
|
||||
compatible = "ti,omap3-uart";
|
||||
reg = <0x4806a000 0x2000>;
|
||||
interrupts = <72>;
|
||||
interrupts-extended = <&intc 72>;
|
||||
dmas = <&sdma 49 &sdma 50>;
|
||||
dma-names = "tx", "rx";
|
||||
ti,hwmods = "uart1";
|
||||
|
|
@ -277,7 +277,7 @@
|
|||
uart2: serial@4806c000 {
|
||||
compatible = "ti,omap3-uart";
|
||||
reg = <0x4806c000 0x400>;
|
||||
interrupts = <73>;
|
||||
interrupts-extended = <&intc 73>;
|
||||
dmas = <&sdma 51 &sdma 52>;
|
||||
dma-names = "tx", "rx";
|
||||
ti,hwmods = "uart2";
|
||||
|
|
@ -287,7 +287,7 @@
|
|||
uart3: serial@49020000 {
|
||||
compatible = "ti,omap3-uart";
|
||||
reg = <0x49020000 0x400>;
|
||||
interrupts = <74>;
|
||||
interrupts-extended = <&intc 74>;
|
||||
dmas = <&sdma 53 &sdma 54>;
|
||||
dma-names = "tx", "rx";
|
||||
ti,hwmods = "uart3";
|
||||
|
|
|
|||
|
|
@ -481,6 +481,21 @@
|
|||
usb-supply = <&vusb>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
|
||||
&omap4_pmx_core OMAP4_UART2_RX>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
|
||||
&omap4_pmx_core OMAP4_UART3_RX>;
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
|
||||
&omap4_pmx_core OMAP4_UART4_RX>;
|
||||
};
|
||||
|
||||
&usb_otg_hs {
|
||||
interface-type = <1>;
|
||||
mode = <3>;
|
||||
|
|
|
|||
|
|
@ -570,16 +570,22 @@
|
|||
};
|
||||
|
||||
&uart2 {
|
||||
interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
|
||||
&omap4_pmx_core OMAP4_UART2_RX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
|
||||
&omap4_pmx_core OMAP4_UART3_RX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3_pins>;
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
|
||||
&omap4_pmx_core OMAP4_UART4_RX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart4_pins>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -311,7 +311,7 @@
|
|||
uart2: serial@4806c000 {
|
||||
compatible = "ti,omap4-uart";
|
||||
reg = <0x4806c000 0x100>;
|
||||
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "uart2";
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
|
|
@ -319,7 +319,7 @@
|
|||
uart3: serial@48020000 {
|
||||
compatible = "ti,omap4-uart";
|
||||
reg = <0x48020000 0x100>;
|
||||
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "uart3";
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
|
|
@ -327,7 +327,7 @@
|
|||
uart4: serial@4806e000 {
|
||||
compatible = "ti,omap4-uart";
|
||||
reg = <0x4806e000 0x100>;
|
||||
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
||||
ti,hwmods = "uart4";
|
||||
clock-frequency = <48000000>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,236 @@
|
|||
/*
|
||||
* Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
||||
* Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include "orion5x-mv88f5182.dtsi"
|
||||
|
||||
/ {
|
||||
model = "LaCie d2 Network";
|
||||
compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x";
|
||||
|
||||
memory {
|
||||
reg = <0x00000000 0x4000000>; /* 64 MB */
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
linux,stdout-path = &uart0;
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
|
||||
<MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
|
||||
<MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&pmx_buttons>;
|
||||
pinctrl-names = "default";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
front_button {
|
||||
label = "Front Push Button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_rocker_sw_on {
|
||||
label = "Power rocker switch (on|auto)";
|
||||
linux,input-type = <5>; /* EV_SW */
|
||||
linux,code = <1>; /* D2NET_SWITCH_POWER_ON */
|
||||
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
power_rocker_sw_off {
|
||||
label = "Power rocker switch (auto|off)";
|
||||
linux,input-type = <5>; /* EV_SW */
|
||||
linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */
|
||||
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
sata0_power: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <0>;
|
||||
regulator-name = "SATA0 Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
sata1_power: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "SATA1 Power";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&devbus_bootcs {
|
||||
status = "okay";
|
||||
|
||||
devbus,keep-config;
|
||||
|
||||
/*
|
||||
* Currently the MTD code does not recognize the MX29LV400CBCT
|
||||
* as a bottom-type device. This could cause risks of
|
||||
* accidentally erasing critical flash sectors. We thus define
|
||||
* a single, write-protected partition covering the whole
|
||||
* flash. TODO: once the flash part TOP/BOTTOM detection
|
||||
* issue is sorted out in the MTD code, break this into at
|
||||
* least three partitions: 'u-boot code', 'u-boot environment'
|
||||
* and 'whatever is left'.
|
||||
*/
|
||||
flash@0 {
|
||||
compatible = "cfi-flash";
|
||||
reg = <0 0x80000>;
|
||||
bank-width = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Full512Kb";
|
||||
reg = <0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
ethphy: ethernet-phy {
|
||||
reg = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
ethernet-port@0 {
|
||||
phy-handle = <ðphy>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
#address-cells = <1>;
|
||||
|
||||
rtc@32 {
|
||||
compatible = "ricoh,rs5c372b";
|
||||
reg = <0x32>;
|
||||
};
|
||||
|
||||
fan@3e {
|
||||
compatible = "gmt,g762";
|
||||
reg = <0x3e>;
|
||||
|
||||
/* Not enough HW info */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c08";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
pmx_board_id: pmx-board-id {
|
||||
marvell,pins = "mpp0", "mpp1", "mpp2";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_buttons: pmx-buttons {
|
||||
marvell,pins = "mpp8", "mpp9", "mpp18";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_fan_fail: pmx-fan-fail {
|
||||
marvell,pins = "mpp5";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
/*
|
||||
* MPP6: Red front LED
|
||||
* MPP16: Blue front LED blink control
|
||||
*/
|
||||
pmx_leds: pmx-leds {
|
||||
marvell,pins = "mpp6", "mpp16";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_sata0_led_active: pmx-sata0-led-active {
|
||||
marvell,pins = "mpp14";
|
||||
marvell,function = "sata0";
|
||||
};
|
||||
|
||||
pmx_sata0_power: pmx-sata0-power {
|
||||
marvell,pins = "mpp3";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_sata1_led_active: pmx-sata1-led-active {
|
||||
marvell,pins = "mpp15";
|
||||
marvell,function = "sata1";
|
||||
};
|
||||
|
||||
pmx_sata1_power: pmx-sata1-power {
|
||||
marvell,pins = "mpp12";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
/*
|
||||
* Non MPP GPIOs:
|
||||
* GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
|
||||
* GPIO 23: Blue front LED off
|
||||
* GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
|
||||
*/
|
||||
};
|
||||
|
||||
&sata {
|
||||
pinctrl-0 = <&pmx_sata0_led_active
|
||||
&pmx_sata1_led_active>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
nr-ports = <2>;
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -6,8 +6,19 @@
|
|||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/*
|
||||
* TODO: add Orion USB device port init when kernel.org support is added.
|
||||
* TODO: add flash write support: see below.
|
||||
* TODO: add power-off support.
|
||||
* TODO: add I2C EEPROM support.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/include/ "orion5x.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include "orion5x-mv88f5182.dtsi"
|
||||
|
||||
/ {
|
||||
model = "LaCie Ethernet Disk mini V2";
|
||||
|
|
@ -19,41 +30,105 @@
|
|||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
linux,stdout-path = &uart0;
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
serial@12000 {
|
||||
clock-frequency = <166666667>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sata@80000 {
|
||||
status = "okay";
|
||||
nr-ports = <2>;
|
||||
};
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
|
||||
<MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
|
||||
<MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>;
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&pmx_power_button>;
|
||||
pinctrl-names = "default";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
button@1 {
|
||||
label = "Power-on Switch";
|
||||
linux,code = <116>; /* KEY_POWER */
|
||||
gpios = <&gpio0 18 0>;
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio_leds {
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&pmx_power_led>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led@1 {
|
||||
label = "power:blue";
|
||||
gpios = <&gpio0 16 1>;
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&devbus_bootcs {
|
||||
status = "okay";
|
||||
|
||||
/* Read parameters */
|
||||
devbus,bus-width = <8>;
|
||||
devbus,turn-off-ps = <90000>;
|
||||
devbus,badr-skew-ps = <0>;
|
||||
devbus,acc-first-ps = <186000>;
|
||||
devbus,acc-next-ps = <186000>;
|
||||
|
||||
/* Write parameters */
|
||||
devbus,wr-high-ps = <90000>;
|
||||
devbus,wr-low-ps = <90000>;
|
||||
devbus,ale-wr-ps = <90000>;
|
||||
|
||||
/*
|
||||
* Currently the MTD code does not recognize the MX29LV400CBCT
|
||||
* as a bottom-type device. This could cause risks of
|
||||
* accidentally erasing critical flash sectors. We thus define
|
||||
* a single, write-protected partition covering the whole
|
||||
* flash. TODO: once the flash part TOP/BOTTOM detection
|
||||
* issue is sorted out in the MTD code, break this into at
|
||||
* least three partitions: 'u-boot code', 'u-boot environment'
|
||||
* and 'whatever is left'.
|
||||
*/
|
||||
flash@0 {
|
||||
compatible = "cfi-flash";
|
||||
reg = <0 0x80000>;
|
||||
bank-width = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "Full512Kb";
|
||||
reg = <0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
ethernet-port@0 {
|
||||
phy-handle = <ðphy>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
#address-cells = <1>;
|
||||
|
||||
rtc@32 {
|
||||
compatible = "ricoh,rs5c372a";
|
||||
reg = <0x32>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
|
|
@ -62,10 +137,38 @@
|
|||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
&pinctrl {
|
||||
pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
ethernet-port@0 {
|
||||
phy-handle = <ðphy>;
|
||||
pmx_power_button: pmx-power-button {
|
||||
marvell,pins = "mpp18";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_power_led: pmx-power-led {
|
||||
marvell,pins = "mpp16";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_power_led_ctrl: pmx-power-led-ctrl {
|
||||
marvell,pins = "mpp17";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_rtc: pmx-rtc {
|
||||
marvell,pins = "mpp3";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&sata {
|
||||
pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
nr-ports = <2>;
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,178 @@
|
|||
/*
|
||||
* Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
||||
* Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include "orion5x-mv88f5182.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Maxtor Shared Storage II";
|
||||
compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x";
|
||||
|
||||
memory {
|
||||
reg = <0x00000000 0x4000000>; /* 64 MB */
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
linux,stdout-path = &uart0;
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
|
||||
<MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
|
||||
<MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&pmx_buttons>;
|
||||
pinctrl-names = "default";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
power {
|
||||
label = "Power";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&devbus_bootcs {
|
||||
status = "okay";
|
||||
|
||||
devbus,keep-config;
|
||||
|
||||
/*
|
||||
* Currently the MTD code does not recognize the MX29LV400CBCT
|
||||
* as a bottom-type device. This could cause risks of
|
||||
* accidentally erasing critical flash sectors. We thus define
|
||||
* a single, write-protected partition covering the whole
|
||||
* flash. TODO: once the flash part TOP/BOTTOM detection
|
||||
* issue is sorted out in the MTD code, break this into at
|
||||
* least three partitions: 'u-boot code', 'u-boot environment'
|
||||
* and 'whatever is left'.
|
||||
*/
|
||||
flash@0 {
|
||||
compatible = "cfi-flash";
|
||||
reg = <0 0x40000>;
|
||||
bank-width = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
ethphy: ethernet-phy {
|
||||
reg = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
ethernet-port@0 {
|
||||
phy-handle = <ðphy>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
#address-cells = <1>;
|
||||
|
||||
rtc@68 {
|
||||
compatible = "st,m41t81";
|
||||
reg = <0x68>;
|
||||
pinctrl-0 = <&pmx_rtc>;
|
||||
pinctrl-names = "default";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-0 = <&pmx_leds &pmx_misc>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
pmx_buttons: pmx-buttons {
|
||||
marvell,pins = "mpp11", "mpp12";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
/*
|
||||
* MPP0: Power LED
|
||||
* MPP1: Error LED
|
||||
*/
|
||||
pmx_leds: pmx-leds {
|
||||
marvell,pins = "mpp0", "mpp1";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
/*
|
||||
* MPP4: HDD ind. (Single/Dual)
|
||||
* MPP5: HD0 5V control
|
||||
* MPP6: HD0 12V control
|
||||
* MPP7: HD1 5V control
|
||||
* MPP8: HD1 12V control
|
||||
*/
|
||||
pmx_misc: pmx-misc {
|
||||
marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_rtc: pmx-rtc {
|
||||
marvell,pins = "mpp3";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_sata0_led_active: pmx-sata0-led-active {
|
||||
marvell,pins = "mpp14";
|
||||
marvell,function = "sata0";
|
||||
};
|
||||
|
||||
pmx_sata1_led_active: pmx-sata1-led-active {
|
||||
marvell,pins = "mpp15";
|
||||
marvell,function = "sata1";
|
||||
};
|
||||
|
||||
/*
|
||||
* Non MPP GPIOs:
|
||||
* GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok)
|
||||
* GPIO 23: Blue front LED off
|
||||
* GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled)
|
||||
*/
|
||||
};
|
||||
|
||||
&sata {
|
||||
pinctrl-0 = <&pmx_sata0_led_active
|
||||
&pmx_sata1_led_active>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
nr-ports = <2>;
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,45 @@
|
|||
/*
|
||||
* Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include "orion5x.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "marvell,orion5x-88f5182", "marvell,orion5x";
|
||||
|
||||
soc {
|
||||
compatible = "marvell,orion5x-88f5182-mbus", "simple-bus";
|
||||
|
||||
internal-regs {
|
||||
pinctrl: pinctrl@10000 {
|
||||
compatible = "marvell,88f5182-pinctrl";
|
||||
reg = <0x10000 0x8>, <0x10050 0x4>;
|
||||
|
||||
pmx_sata0: pmx-sata0 {
|
||||
marvell,pins = "mpp12", "mpp14";
|
||||
marvell,function = "sata0";
|
||||
};
|
||||
|
||||
pmx_sata1: pmx-sata1 {
|
||||
marvell,pins = "mpp13", "mpp15";
|
||||
marvell,function = "sata1";
|
||||
};
|
||||
};
|
||||
|
||||
core_clk: core-clocks@10030 {
|
||||
compatible = "marvell,mv88f5182-core-clock";
|
||||
reg = <0x10010 0x4>;
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
mbusc: mbus-controller@20000 {
|
||||
compatible = "marvell,mbus-controller";
|
||||
reg = <0x20000 0x100>, <0x1500 0x20>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,177 @@
|
|||
/*
|
||||
* Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "orion5x-mv88f5182.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Marvell Reference Design 88F5182 NAS";
|
||||
compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
|
||||
|
||||
memory {
|
||||
reg = <0x00000000 0x4000000>; /* 64 MB */
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
linux,stdout-path = &uart0;
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
|
||||
<MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
|
||||
<MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
|
||||
<MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&pmx_debug_led>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led@0 {
|
||||
label = "rd88f5182:cpu";
|
||||
linux,default-trigger = "heartbeat";
|
||||
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&devbus_bootcs {
|
||||
status = "okay";
|
||||
|
||||
/* Read parameters */
|
||||
devbus,bus-width = <8>;
|
||||
devbus,turn-off-ps = <90000>;
|
||||
devbus,badr-skew-ps = <0>;
|
||||
devbus,acc-first-ps = <186000>;
|
||||
devbus,acc-next-ps = <186000>;
|
||||
|
||||
/* Write parameters */
|
||||
devbus,wr-high-ps = <90000>;
|
||||
devbus,wr-low-ps = <90000>;
|
||||
devbus,ale-wr-ps = <90000>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "cfi-flash";
|
||||
reg = <0 0x80000>;
|
||||
bank-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&devbus_cs1 {
|
||||
status = "okay";
|
||||
|
||||
/* Read parameters */
|
||||
devbus,bus-width = <8>;
|
||||
devbus,turn-off-ps = <90000>;
|
||||
devbus,badr-skew-ps = <0>;
|
||||
devbus,acc-first-ps = <186000>;
|
||||
devbus,acc-next-ps = <186000>;
|
||||
|
||||
/* Write parameters */
|
||||
devbus,wr-high-ps = <90000>;
|
||||
devbus,wr-low-ps = <90000>;
|
||||
devbus,ale-wr-ps = <90000>;
|
||||
|
||||
flash@0 {
|
||||
compatible = "cfi-flash";
|
||||
reg = <0 0x1000000>;
|
||||
bank-width = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
ethernet-port@0 {
|
||||
phy-handle = <ðphy>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
#address-cells = <1>;
|
||||
|
||||
rtc@68 {
|
||||
pinctrl-0 = <&pmx_rtc>;
|
||||
pinctrl-names = "default";
|
||||
compatible = "dallas,ds1338";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
ethphy: ethernet-phy {
|
||||
reg = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
|
||||
&pmx_pci_gpios>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
/*
|
||||
* MPP[20] PCI Clock to MV88F5182
|
||||
* MPP[21] PCI Clock to mini PCI CON11
|
||||
* MPP[22] USB 0 over current indication
|
||||
* MPP[23] USB 1 over current indication
|
||||
* MPP[24] USB 1 over current enable
|
||||
* MPP[25] USB 0 over current enable
|
||||
*/
|
||||
|
||||
pmx_debug_led: pmx-debug_led {
|
||||
marvell,pins = "mpp0";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_reset_switch: pmx-reset-switch {
|
||||
marvell,pins = "mpp1";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_rtc: pmx-rtc {
|
||||
marvell,pins = "mpp3";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_misc_gpios: pmx-misc-gpios {
|
||||
marvell,pins = "mpp4", "mpp5";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_pci_gpios: pmx-pci-gpios {
|
||||
marvell,pins = "mpp6", "mpp7";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&sata {
|
||||
pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
nr-ports = <2>;
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -6,7 +6,9 @@
|
|||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/include/ "skeleton.dtsi"
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
|
||||
|
||||
/ {
|
||||
model = "Marvell Orion5x SoC";
|
||||
|
|
@ -17,149 +19,214 @@
|
|||
gpio0 = &gpio0;
|
||||
};
|
||||
|
||||
intc: interrupt-controller {
|
||||
compatible = "marvell,orion-intc";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0xf1020200 0x08>;
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
compatible = "simple-bus";
|
||||
ranges = <0x00000000 0xf1000000 0x4000000
|
||||
0xf2200000 0xf2200000 0x0000800>;
|
||||
#address-cells = <1>;
|
||||
soc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
controller = <&mbusc>;
|
||||
|
||||
gpio0: gpio@10100 {
|
||||
compatible = "marvell,orion-gpio";
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
reg = <0x10100 0x40>;
|
||||
ngpios = <32>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <6>, <7>, <8>, <9>;
|
||||
};
|
||||
|
||||
spi@10600 {
|
||||
compatible = "marvell,orion-spi";
|
||||
devbus_bootcs: devbus-bootcs {
|
||||
compatible = "marvell,orion-devbus";
|
||||
reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>;
|
||||
ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
reg = <0x10600 0x28>;
|
||||
#size-cells = <1>;
|
||||
clocks = <&core_clk 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c@11000 {
|
||||
compatible = "marvell,mv64xxx-i2c";
|
||||
reg = <0x11000 0x20>;
|
||||
devbus_cs0: devbus-cs0 {
|
||||
compatible = "marvell,orion-devbus";
|
||||
reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>;
|
||||
ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <5>;
|
||||
clock-frequency = <100000>;
|
||||
#size-cells = <1>;
|
||||
clocks = <&core_clk 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@12000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x12000 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <3>;
|
||||
/* set clock-frequency in board dts */
|
||||
devbus_cs1: devbus-cs1 {
|
||||
compatible = "marvell,orion-devbus";
|
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>;
|
||||
ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
clocks = <&core_clk 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@12100 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x12100 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <4>;
|
||||
/* set clock-frequency in board dts */
|
||||
devbus_cs2: devbus-cs2 {
|
||||
compatible = "marvell,orion-devbus";
|
||||
reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>;
|
||||
ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
clocks = <&core_clk 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
wdt@20300 {
|
||||
compatible = "marvell,orion-wdt";
|
||||
reg = <0x20300 0x28>;
|
||||
status = "okay";
|
||||
};
|
||||
internal-regs {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
|
||||
|
||||
ehci@50000 {
|
||||
compatible = "marvell,orion-ehci";
|
||||
reg = <0x50000 0x1000>;
|
||||
interrupts = <17>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
xor@60900 {
|
||||
compatible = "marvell,orion-xor";
|
||||
reg = <0x60900 0x100
|
||||
0x60b00 0x100>;
|
||||
status = "okay";
|
||||
|
||||
xor00 {
|
||||
interrupts = <30>;
|
||||
dmacap,memcpy;
|
||||
dmacap,xor;
|
||||
gpio0: gpio@10100 {
|
||||
compatible = "marvell,orion-gpio";
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
reg = <0x10100 0x40>;
|
||||
ngpios = <32>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <6>, <7>, <8>, <9>;
|
||||
};
|
||||
xor01 {
|
||||
interrupts = <31>;
|
||||
dmacap,memcpy;
|
||||
dmacap,xor;
|
||||
dmacap,memset;
|
||||
|
||||
spi: spi@10600 {
|
||||
compatible = "marvell,orion-spi";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
reg = <0x10600 0x28>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c: i2c@11000 {
|
||||
compatible = "marvell,mv64xxx-i2c";
|
||||
reg = <0x11000 0x20>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <5>;
|
||||
clocks = <&core_clk 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart0: serial@12000 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x12000 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <3>;
|
||||
clocks = <&core_clk 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart1: serial@12100 {
|
||||
compatible = "ns16550a";
|
||||
reg = <0x12100 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <4>;
|
||||
clocks = <&core_clk 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
bridge_intc: bridge-interrupt-ctrl@20110 {
|
||||
compatible = "marvell,orion-bridge-intc";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0x20110 0x8>;
|
||||
interrupts = <0>;
|
||||
marvell,#interrupts = <4>;
|
||||
};
|
||||
|
||||
intc: interrupt-controller@20200 {
|
||||
compatible = "marvell,orion-intc";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0x20200 0x08>;
|
||||
};
|
||||
|
||||
timer: timer@20300 {
|
||||
compatible = "marvell,orion-timer";
|
||||
reg = <0x20300 0x20>;
|
||||
interrupt-parent = <&bridge_intc>;
|
||||
interrupts = <1>, <2>;
|
||||
clocks = <&core_clk 0>;
|
||||
};
|
||||
|
||||
wdt: wdt@20300 {
|
||||
compatible = "marvell,orion-wdt";
|
||||
reg = <0x20300 0x28>;
|
||||
interrupt-parent = <&bridge_intc>;
|
||||
interrupts = <3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ehci0: ehci@50000 {
|
||||
compatible = "marvell,orion-ehci";
|
||||
reg = <0x50000 0x1000>;
|
||||
interrupts = <17>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
xor: dma-controller@60900 {
|
||||
compatible = "marvell,orion-xor";
|
||||
reg = <0x60900 0x100
|
||||
0x60b00 0x100>;
|
||||
status = "okay";
|
||||
|
||||
xor00 {
|
||||
interrupts = <30>;
|
||||
dmacap,memcpy;
|
||||
dmacap,xor;
|
||||
};
|
||||
xor01 {
|
||||
interrupts = <31>;
|
||||
dmacap,memcpy;
|
||||
dmacap,xor;
|
||||
dmacap,memset;
|
||||
};
|
||||
};
|
||||
|
||||
eth: ethernet-controller@72000 {
|
||||
compatible = "marvell,orion-eth";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x72000 0x4000>;
|
||||
marvell,tx-checksum-limit = <1600>;
|
||||
status = "disabled";
|
||||
|
||||
ethport: ethernet-port@0 {
|
||||
compatible = "marvell,orion-eth-port";
|
||||
reg = <0>;
|
||||
interrupts = <21>;
|
||||
/* overwrite MAC address in bootloader */
|
||||
local-mac-address = [00 00 00 00 00 00];
|
||||
/* set phy-handle property in board file */
|
||||
};
|
||||
};
|
||||
|
||||
mdio: mdio-bus@72004 {
|
||||
compatible = "marvell,orion-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x72004 0x84>;
|
||||
interrupts = <22>;
|
||||
status = "disabled";
|
||||
|
||||
/* add phy nodes in board file */
|
||||
};
|
||||
|
||||
sata: sata@80000 {
|
||||
compatible = "marvell,orion-sata";
|
||||
reg = <0x80000 0x5000>;
|
||||
interrupts = <29>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehci1: ehci@a0000 {
|
||||
compatible = "marvell,orion-ehci";
|
||||
reg = <0xa0000 0x1000>;
|
||||
interrupts = <12>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
eth: ethernet-controller@72000 {
|
||||
compatible = "marvell,orion-eth";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x72000 0x4000>;
|
||||
marvell,tx-checksum-limit = <1600>;
|
||||
status = "disabled";
|
||||
|
||||
ethernet-port@0 {
|
||||
compatible = "marvell,orion-eth-port";
|
||||
reg = <0>;
|
||||
/* overwrite MAC address in bootloader */
|
||||
local-mac-address = [00 00 00 00 00 00];
|
||||
/* set phy-handle property in board file */
|
||||
};
|
||||
};
|
||||
|
||||
mdio: mdio-bus@72004 {
|
||||
compatible = "marvell,orion-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x72004 0x84>;
|
||||
interrupts = <22>;
|
||||
status = "disabled";
|
||||
|
||||
/* add phy nodes in board file */
|
||||
};
|
||||
|
||||
sata@80000 {
|
||||
compatible = "marvell,orion-sata";
|
||||
reg = <0x80000 0x5000>;
|
||||
interrupts = <29>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
crypto@90000 {
|
||||
cesa: crypto@90000 {
|
||||
compatible = "marvell,orion-crypto";
|
||||
reg = <0x90000 0x10000>,
|
||||
<0xf2200000 0x800>;
|
||||
reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>,
|
||||
<MBUS_ID(0x09, 0x00) 0x0 0x800>;
|
||||
reg-names = "regs", "sram";
|
||||
interrupts = <28>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ehci@a0000 {
|
||||
compatible = "marvell,orion-ehci";
|
||||
reg = <0xa0000 0x1000>;
|
||||
interrupts = <12>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@
|
|||
compatible = "arm,cortex-a9";
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
clock-frequency = <800000000>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -673,7 +673,7 @@
|
|||
renesas,clock-indices = <
|
||||
R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
|
||||
R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1
|
||||
R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY
|
||||
R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
|
||||
>;
|
||||
clock-output-names =
|
||||
"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
|
||||
|
|
|
|||
|
|
@ -688,7 +688,7 @@
|
|||
renesas,clock-indices = <
|
||||
R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
|
||||
R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1
|
||||
R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY
|
||||
R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S
|
||||
>;
|
||||
clock-output-names =
|
||||
"tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
|
||||
|
|
|
|||
|
|
@ -24,6 +24,7 @@
|
|||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
enable-method = "rockchip,rk3066-smp";
|
||||
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
|
|
|
|||
|
|
@ -24,6 +24,7 @@
|
|||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
enable-method = "rockchip,rk3066-smp";
|
||||
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
|
|
|
|||
|
|
@ -58,6 +58,18 @@
|
|||
reg = <0x20000000 0x8000000>;
|
||||
};
|
||||
|
||||
slow_xtal: slow_xtal {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
main_xtal: main_xtal {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
adc_op_clk: adc_op_clk{
|
||||
compatible = "fixed-clock";
|
||||
|
|
@ -749,18 +761,29 @@
|
|||
#size-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
|
||||
clk32k: slck {
|
||||
compatible = "fixed-clock";
|
||||
main_rc_osc: main_rc_osc {
|
||||
compatible = "atmel,at91sam9x5-clk-main-rc-osc";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
interrupt-parent = <&pmc>;
|
||||
interrupts = <AT91_PMC_MOSCRCS>;
|
||||
clock-frequency = <12000000>;
|
||||
clock-accuracy = <50000000>;
|
||||
};
|
||||
|
||||
main: mainck {
|
||||
compatible = "atmel,at91rm9200-clk-main";
|
||||
main_osc: main_osc {
|
||||
compatible = "atmel,at91rm9200-clk-main-osc";
|
||||
#clock-cells = <0>;
|
||||
interrupt-parent = <&pmc>;
|
||||
interrupts = <AT91_PMC_MOSCS>;
|
||||
clocks = <&clk32k>;
|
||||
clocks = <&main_xtal>;
|
||||
};
|
||||
|
||||
main: mainck {
|
||||
compatible = "atmel,at91sam9x5-clk-main";
|
||||
#clock-cells = <0>;
|
||||
interrupt-parent = <&pmc>;
|
||||
interrupts = <AT91_PMC_MOSCSELS>;
|
||||
clocks = <&main_rc_osc &main_osc>;
|
||||
};
|
||||
|
||||
plla: pllack {
|
||||
|
|
@ -1089,6 +1112,32 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
sckc@fffffe50 {
|
||||
compatible = "atmel,at91sam9x5-sckc";
|
||||
reg = <0xfffffe50 0x4>;
|
||||
|
||||
slow_rc_osc: slow_rc_osc {
|
||||
compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
clock-accuracy = <50000000>;
|
||||
atmel,startup-time-usec = <75>;
|
||||
};
|
||||
|
||||
slow_osc: slow_osc {
|
||||
compatible = "atmel,at91sam9x5-clk-slow-osc";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&slow_xtal>;
|
||||
atmel,startup-time-usec = <1200000>;
|
||||
};
|
||||
|
||||
clk32k: slowck {
|
||||
compatible = "atmel,at91sam9x5-clk-slow";
|
||||
#clock-cells = <0>;
|
||||
clocks = <&slow_rc_osc &slow_osc>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc@fffffeb0 {
|
||||
compatible = "atmel,at91rm9200-rtc";
|
||||
reg = <0xfffffeb0 0x30>;
|
||||
|
|
|
|||
|
|
@ -18,6 +18,14 @@
|
|||
reg = <0x20000000 0x20000000>;
|
||||
};
|
||||
|
||||
slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
spi0: spi@f0004000 {
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@
|
|||
|
||||
&twl {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&twl4030_pins>;
|
||||
pinctrl-0 = <&twl4030_pins &twl4030_vpins>;
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
|
|
@ -23,3 +23,20 @@
|
|||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* If your board is not using the I2C4 pins with twl4030, then don't include
|
||||
* this file. For proper idle mode signaling with sys_clkreq and sys_off_mode
|
||||
* pins we need to configure I2C4, or else use the legacy sys_nvmode1 and
|
||||
* sys_nvmode2 signaling.
|
||||
*/
|
||||
&omap3_pmx_wkup {
|
||||
twl4030_vpins: pinmux_twl4030_vpins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0) /* i2c4_scl.i2c4_scl */
|
||||
OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0) /* i2c4_sda.i2c4_sda */
|
||||
OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0) /* sys_clkreq.sys_clkreq */
|
||||
OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0) /* sys_off_mode.sys_off_mode */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -177,6 +177,11 @@
|
|||
};
|
||||
};
|
||||
|
||||
devcfg: devcfg@f8007000 {
|
||||
compatible = "xlnx,zynq-devcfg-1.0";
|
||||
reg = <0xf8007000 0x100>;
|
||||
} ;
|
||||
|
||||
global_timer: timer@f8f00200 {
|
||||
compatible = "arm,cortex-a9-global-timer";
|
||||
reg = <0xf8f00200 0x20>;
|
||||
|
|
|
|||
|
|
@ -83,7 +83,6 @@ CONFIG_KEYBOARD_GPIO=y
|
|||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
|
||||
CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
|
||||
# CONFIG_SERIO is not set
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
|
|
@ -146,6 +145,8 @@ CONFIG_DMADEVICES=y
|
|||
CONFIG_AT_HDMAC=y
|
||||
CONFIG_DMATEST=m
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_IIO=y
|
||||
CONFIG_AT91_ADC=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_FANOTIFY=y
|
||||
CONFIG_VFAT_FS=y
|
||||
|
|
|
|||
|
|
@ -45,7 +45,6 @@ CONFIG_INPUT_EVDEV=y
|
|||
# CONFIG_INPUT_KEYBOARD is not set
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
|
|
@ -65,6 +64,8 @@ CONFIG_MMC=y
|
|||
CONFIG_MMC_ATMELMCI=m
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91SAM9=y
|
||||
CONFIG_IIO=y
|
||||
CONFIG_AT91_ADC=y
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
|
|
|
|||
|
|
@ -0,0 +1,248 @@
|
|||
CONFIG_SYSVIPC=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_FHANDLE=y
|
||||
CONFIG_AUDIT=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
CONFIG_BSD_PROCESS_ACCT=y
|
||||
CONFIG_BSD_PROCESS_ACCT_V3=y
|
||||
CONFIG_TASKSTATS=y
|
||||
CONFIG_TASK_DELAY_ACCT=y
|
||||
CONFIG_TASK_XACCT=y
|
||||
CONFIG_TASK_IO_ACCOUNTING=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=16
|
||||
CONFIG_NAMESPACES=y
|
||||
# CONFIG_UTS_NS is not set
|
||||
# CONFIG_IPC_NS is not set
|
||||
# CONFIG_PID_NS is not set
|
||||
# CONFIG_NET_NS is not set
|
||||
CONFIG_SCHED_AUTOGROUP=y
|
||||
CONFIG_RELAY=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_SYSCTL_SYSCALL=y
|
||||
CONFIG_EMBEDDED=y
|
||||
# CONFIG_COMPAT_BRK is not set
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
CONFIG_ARCH_AXXIA=y
|
||||
CONFIG_GPIO_PCA953X=y
|
||||
CONFIG_ARM_LPAE=y
|
||||
CONFIG_ARM_THUMBEE=y
|
||||
CONFIG_ARM_ERRATA_430973=y
|
||||
CONFIG_ARM_ERRATA_643719=y
|
||||
CONFIG_ARM_ERRATA_720789=y
|
||||
CONFIG_ARM_ERRATA_754322=y
|
||||
CONFIG_ARM_ERRATA_754327=y
|
||||
CONFIG_ARM_ERRATA_764369=y
|
||||
CONFIG_ARM_ERRATA_775420=y
|
||||
CONFIG_ARM_ERRATA_798181=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PCIE_AXXIA=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_NR_CPUS=16
|
||||
CONFIG_HOTPLUG_CPU=y
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_OABI_COMPAT=y
|
||||
CONFIG_HIGHMEM=y
|
||||
CONFIG_KSM=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_ARM_APPENDED_DTB=y
|
||||
CONFIG_ARM_ATAG_DTB_COMPAT=y
|
||||
CONFIG_VFP=y
|
||||
CONFIG_NEON=y
|
||||
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
|
||||
CONFIG_BINFMT_MISC=y
|
||||
# CONFIG_SUSPEND is not set
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_XFRM_USER=y
|
||||
CONFIG_XFRM_SUB_POLICY=y
|
||||
CONFIG_XFRM_MIGRATE=y
|
||||
CONFIG_XFRM_STATISTICS=y
|
||||
CONFIG_NET_KEY=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_INET_AH=y
|
||||
CONFIG_INET_ESP=y
|
||||
CONFIG_INET_IPCOMP=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_NETWORK_PHY_TIMESTAMPING=y
|
||||
CONFIG_BRIDGE=y
|
||||
# CONFIG_WIRELESS is not set
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_AFS_PARTS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_CFI=y
|
||||
CONFIG_MTD_CFI_INTELEXT=y
|
||||
CONFIG_MTD_CFI_AMDSTD=y
|
||||
CONFIG_MTD_CFI_STAA=y
|
||||
CONFIG_MTD_PHYSMAP=y
|
||||
CONFIG_MTD_PHYSMAP_OF=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_EEPROM_AT25=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_CHR_DEV_SG=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_PATA_PLATFORM=y
|
||||
CONFIG_PATA_OF_PLATFORM=y
|
||||
CONFIG_MD=y
|
||||
CONFIG_BLK_DEV_DM=y
|
||||
CONFIG_DM_UEVENT=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_TUN=y
|
||||
CONFIG_VETH=y
|
||||
CONFIG_VIRTIO_NET=y
|
||||
# CONFIG_NET_CADENCE is not set
|
||||
# CONFIG_NET_VENDOR_BROADCOM is not set
|
||||
# CONFIG_NET_VENDOR_CIRRUS is not set
|
||||
# CONFIG_NET_VENDOR_FARADAY is not set
|
||||
# CONFIG_NET_VENDOR_INTEL is not set
|
||||
# CONFIG_NET_VENDOR_MARVELL is not set
|
||||
# CONFIG_NET_VENDOR_MICREL is not set
|
||||
# CONFIG_NET_VENDOR_NATSEMI is not set
|
||||
# CONFIG_NET_VENDOR_SEEQ is not set
|
||||
# CONFIG_NET_VENDOR_SMSC is not set
|
||||
# CONFIG_NET_VENDOR_STMICRO is not set
|
||||
# CONFIG_NET_VENDOR_VIA is not set
|
||||
# CONFIG_NET_VENDOR_WIZNET is not set
|
||||
CONFIG_BROADCOM_PHY=y
|
||||
# CONFIG_WLAN is not set
|
||||
# CONFIG_MOUSE_PS2_ALPS is not set
|
||||
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
|
||||
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
|
||||
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
|
||||
# CONFIG_SERIO_SERPORT is not set
|
||||
CONFIG_SERIO_AMBAKMI=y
|
||||
CONFIG_LEGACY_PTY_COUNT=16
|
||||
CONFIG_SERIAL_AMBA_PL011=y
|
||||
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
|
||||
CONFIG_VIRTIO_CONSOLE=y
|
||||
# CONFIG_HW_RANDOM is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_MUX=y
|
||||
CONFIG_I2C_AXXIA=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_PL022=y
|
||||
CONFIG_DP83640_PHY=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
CONFIG_GPIO_PL061=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_POWER_RESET=y
|
||||
CONFIG_POWER_RESET_AXXIA=y
|
||||
CONFIG_SENSORS_ADT7475=y
|
||||
CONFIG_SENSORS_JC42=y
|
||||
CONFIG_SENSORS_LM75=y
|
||||
CONFIG_PMBUS=y
|
||||
CONFIG_SENSORS_LTC2978=y
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_ARM_SP805_WATCHDOG=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_ARMCLCD=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_LOGO=y
|
||||
# CONFIG_LOGO_LINUX_MONO is not set
|
||||
# CONFIG_LOGO_LINUX_VGA16 is not set
|
||||
CONFIG_HID_A4TECH=y
|
||||
CONFIG_HID_APPLE=y
|
||||
CONFIG_HID_BELKIN=y
|
||||
CONFIG_HID_CHERRY=y
|
||||
CONFIG_HID_CHICONY=y
|
||||
CONFIG_HID_CYPRESS=y
|
||||
CONFIG_HID_DRAGONRISE=y
|
||||
CONFIG_HID_EZKEY=y
|
||||
CONFIG_HID_KYE=y
|
||||
CONFIG_HID_GYRATION=y
|
||||
CONFIG_HID_TWINHAN=y
|
||||
CONFIG_HID_KENSINGTON=y
|
||||
CONFIG_HID_LOGITECH=y
|
||||
CONFIG_HID_MICROSOFT=y
|
||||
CONFIG_HID_MONTEREY=y
|
||||
CONFIG_HID_NTRIG=y
|
||||
CONFIG_HID_ORTEK=y
|
||||
CONFIG_HID_PANTHERLORD=y
|
||||
CONFIG_HID_PETALYNX=y
|
||||
CONFIG_HID_SAMSUNG=y
|
||||
CONFIG_HID_SUNPLUS=y
|
||||
CONFIG_HID_GREENASIA=y
|
||||
CONFIG_HID_SMARTJOYPLUS=y
|
||||
CONFIG_HID_TOPSEED=y
|
||||
CONFIG_HID_THRUSTMASTER=y
|
||||
CONFIG_HID_ZEROPLUS=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
|
||||
CONFIG_USB_EHCI_HCD_AXXIA=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_ARMMMCI=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_PL330_DMA=y
|
||||
CONFIG_VIRT_DRIVERS=y
|
||||
CONFIG_VIRTIO_MMIO=y
|
||||
CONFIG_MAILBOX=y
|
||||
CONFIG_PL320_MBOX=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_AUTOFS4_FS=y
|
||||
CONFIG_FUSE_FS=y
|
||||
CONFIG_CUSE=y
|
||||
CONFIG_FSCACHE=y
|
||||
CONFIG_FSCACHE_STATS=y
|
||||
CONFIG_FSCACHE_HISTOGRAM=y
|
||||
CONFIG_FSCACHE_DEBUG=y
|
||||
CONFIG_FSCACHE_OBJECT_LIST=y
|
||||
CONFIG_CACHEFILES=y
|
||||
CONFIG_CACHEFILES_HISTOGRAM=y
|
||||
CONFIG_ISO9660_FS=y
|
||||
CONFIG_UDF_FS=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_NTFS_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_JFFS2_FS=y
|
||||
CONFIG_CRAMFS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NFS_FSCACHE=y
|
||||
CONFIG_SUNRPC_DEBUG=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEBUG_FS=y
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
# CONFIG_SCHED_DEBUG is not set
|
||||
CONFIG_RCU_CPU_STALL_TIMEOUT=60
|
||||
# CONFIG_FTRACE is not set
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_CRYPTO_GCM=y
|
||||
CONFIG_CRYPTO_XCBC=y
|
||||
CONFIG_CRYPTO_SHA256=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
CONFIG_VIRTUALIZATION=y
|
||||
CONFIG_KVM=y
|
||||
|
|
@ -91,6 +91,7 @@ CONFIG_FB=y
|
|||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_PWM=y
|
||||
# CONFIG_USB_SUPPORT is not set
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_UNSAFE_RESUME=y
|
||||
|
|
@ -104,6 +105,8 @@ CONFIG_LEDS_TRIGGERS=y
|
|||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
CONFIG_PWM=y
|
||||
CONFIG_PWM_BCM_KONA=y
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_EXT4_FS_POSIX_ACL=y
|
||||
CONFIG_EXT4_FS_SECURITY=y
|
||||
|
|
|
|||
|
|
@ -80,6 +80,7 @@ CONFIG_MTD_UBI=y
|
|||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_EEPROM_AT25=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_PATA_IMX=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_CS89x0=y
|
||||
|
|
@ -153,8 +154,12 @@ CONFIG_USB_HID=m
|
|||
CONFIG_USB=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_EHCI_MXC=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_CHIPIDEA=y
|
||||
CONFIG_USB_CHIPIDEA_UDC=y
|
||||
CONFIG_USB_CHIPIDEA_HOST=y
|
||||
CONFIG_NOP_USB_XCEIV=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_UNSAFE_RESUME=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMC_SDHCI_ESDHC_IMX=y
|
||||
|
|
@ -177,7 +182,6 @@ CONFIG_RTC_DRV_MXC=y
|
|||
CONFIG_DMADEVICES=y
|
||||
CONFIG_IMX_SDMA=y
|
||||
CONFIG_IMX_DMA=y
|
||||
CONFIG_COMMON_CLK_DEBUG=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_EXT2_FS=y
|
||||
CONFIG_EXT3_FS=y
|
||||
|
|
|
|||
|
|
@ -1,4 +1,3 @@
|
|||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
CONFIG_KERNEL_LZO=y
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_NO_HZ=y
|
||||
|
|
@ -33,7 +32,6 @@ CONFIG_MACH_PCM043=y
|
|||
CONFIG_MACH_MX35_3DS=y
|
||||
CONFIG_MACH_VPR200=y
|
||||
CONFIG_MACH_IMX51_DT=y
|
||||
CONFIG_MACH_EUKREA_CPUIMX51SD=y
|
||||
CONFIG_SOC_IMX50=y
|
||||
CONFIG_SOC_IMX53=y
|
||||
CONFIG_SOC_IMX6Q=y
|
||||
|
|
@ -46,7 +44,11 @@ CONFIG_VMSPLIT_2G=y
|
|||
CONFIG_PREEMPT_VOLUNTARY=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_HIGHMEM=y
|
||||
CONFIG_CMA=y
|
||||
CONFIG_CMDLINE="noinitrd console=ttymxc0,115200"
|
||||
CONFIG_CPU_FREQ=y
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
||||
CONFIG_ARM_IMX6Q_CPUFREQ=y
|
||||
CONFIG_VFP=y
|
||||
CONFIG_NEON=y
|
||||
CONFIG_BINFMT_MISC=m
|
||||
|
|
@ -72,6 +74,7 @@ CONFIG_RFKILL_INPUT=y
|
|||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
# CONFIG_STANDALONE is not set
|
||||
CONFIG_DMA_CMA=y
|
||||
CONFIG_IMX_WEIM=y
|
||||
CONFIG_CONNECTOR=y
|
||||
CONFIG_MTD=y
|
||||
|
|
@ -89,6 +92,7 @@ CONFIG_MTD_SST25L=y
|
|||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_GPMI_NAND=y
|
||||
CONFIG_MTD_NAND_MXC=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
|
|
@ -183,6 +187,7 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y
|
|||
CONFIG_VIDEO_CODA=y
|
||||
CONFIG_SOC_CAMERA_OV2640=y
|
||||
CONFIG_DRM=y
|
||||
CONFIG_DRM_PANEL_SIMPLE=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=y
|
||||
CONFIG_LCD_L4F00242T03=y
|
||||
|
|
@ -215,7 +220,6 @@ CONFIG_USB_GADGET=y
|
|||
CONFIG_USB_ETH=m
|
||||
CONFIG_USB_MASS_STORAGE=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_UNSAFE_RESUME=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMC_SDHCI_ESDHC_IMX=y
|
||||
|
|
@ -245,7 +249,7 @@ CONFIG_DRM_IMX_TVE=y
|
|||
CONFIG_DRM_IMX_LDB=y
|
||||
CONFIG_DRM_IMX_IPUV3_CORE=y
|
||||
CONFIG_DRM_IMX_IPUV3=y
|
||||
CONFIG_COMMON_CLK_DEBUG=y
|
||||
CONFIG_DRM_IMX_HDMI=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_PWM=y
|
||||
CONFIG_PWM_IMX=y
|
||||
|
|
|
|||
|
|
@ -26,7 +26,6 @@ CONFIG_ARCH_MXS=y
|
|||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_PREEMPT_VOLUNTARY=y
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
|
|
@ -51,10 +50,10 @@ CONFIG_MTD_CMDLINE_PARTS=y
|
|||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_DATAFLASH=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
# CONFIG_M25PXX_USE_FAST_READ is not set
|
||||
CONFIG_MTD_SST25L=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_GPMI_NAND=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
CONFIG_MTD_UBI=y
|
||||
# CONFIG_BLK_DEV is not set
|
||||
CONFIG_EEPROM_AT24=y
|
||||
|
|
@ -120,7 +119,6 @@ CONFIG_USB_GADGET=y
|
|||
CONFIG_USB_ETH=m
|
||||
CONFIG_USB_MASS_STORAGE=m
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_UNSAFE_RESUME=y
|
||||
CONFIG_MMC_MXS=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
|
|
@ -138,7 +136,6 @@ CONFIG_DMADEVICES=y
|
|||
CONFIG_MXS_DMA=y
|
||||
CONFIG_STAGING=y
|
||||
CONFIG_MXS_LRADC=y
|
||||
CONFIG_COMMON_CLK_DEBUG=y
|
||||
CONFIG_IIO=y
|
||||
CONFIG_IIO_SYSFS_TRIGGER=y
|
||||
CONFIG_PWM=y
|
||||
|
|
@ -180,7 +177,7 @@ CONFIG_BLK_DEV_IO_TRACE=y
|
|||
CONFIG_STRICT_DEVMEM=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
# CONFIG_CRYPTO_HW is not set
|
||||
CONFIG_CRYPTO_DEV_MXS_DCP=y
|
||||
CONFIG_CRC_ITU_T=m
|
||||
CONFIG_CRC7=m
|
||||
CONFIG_FONTS=y
|
||||
|
|
|
|||
|
|
@ -21,6 +21,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y
|
|||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_ARCH_MULTI_V6=y
|
||||
CONFIG_POWER_AVS_OMAP=y
|
||||
CONFIG_POWER_AVS_OMAP_CLASS3=y
|
||||
CONFIG_OMAP_RESET_CLOCKS=y
|
||||
CONFIG_OMAP_MUX_DEBUG=y
|
||||
CONFIG_ARCH_OMAP2=y
|
||||
|
|
@ -42,6 +44,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y
|
|||
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
CONFIG_PM_DEBUG=y
|
||||
CONFIG_NET=y
|
||||
|
|
@ -159,11 +162,14 @@ CONFIG_GPIO_SYSFS=y
|
|||
CONFIG_GPIO_TWL4030=y
|
||||
CONFIG_W1=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_POWER_AVS=y
|
||||
CONFIG_SENSORS_LM75=m
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_THERMAL_GOV_FAIR_SHARE=y
|
||||
CONFIG_THERMAL_GOV_USER_SPACE=y
|
||||
CONFIG_CPU_THERMAL=y
|
||||
CONFIG_TI_SOC_THERMAL=y
|
||||
CONFIG_TI_THERMAL=y
|
||||
CONFIG_OMAP4_THERMAL=y
|
||||
CONFIG_OMAP5_THERMAL=y
|
||||
CONFIG_DRA752_THERMAL=y
|
||||
|
|
@ -177,6 +183,7 @@ CONFIG_MFD_TPS65910=y
|
|||
CONFIG_TWL6040_CORE=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_REGULATOR_PALMAS=y
|
||||
CONFIG_REGULATOR_TI_ABB=y
|
||||
CONFIG_REGULATOR_TPS65023=y
|
||||
CONFIG_REGULATOR_TPS6507X=y
|
||||
CONFIG_REGULATOR_TPS65217=y
|
||||
|
|
@ -239,6 +246,7 @@ CONFIG_SDIO_UART=y
|
|||
CONFIG_MMC_OMAP=y
|
||||
CONFIG_MMC_OMAP_HS=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
|
|
|
|||
|
|
@ -122,7 +122,6 @@ CONFIG_KEYBOARD_GPIO=y
|
|||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_TOUCHSCREEN_ATMEL_MXT=y
|
||||
CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
|
||||
# CONFIG_SERIO is not set
|
||||
CONFIG_LEGACY_PTY_COUNT=4
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
|
|
|
|||
|
|
@ -81,6 +81,15 @@
|
|||
#define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR
|
||||
#define IMX6SL_UART_BASE(n) IMX6SL_UART_BASE_ADDR(n)
|
||||
|
||||
#define IMX6SX_UART1_BASE_ADDR 0x02020000
|
||||
#define IMX6SX_UART2_BASE_ADDR 0x021e8000
|
||||
#define IMX6SX_UART3_BASE_ADDR 0x021ec000
|
||||
#define IMX6SX_UART4_BASE_ADDR 0x021f0000
|
||||
#define IMX6SX_UART5_BASE_ADDR 0x021f4000
|
||||
#define IMX6SX_UART6_BASE_ADDR 0x022a0000
|
||||
#define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR
|
||||
#define IMX6SX_UART_BASE(n) IMX6SX_UART_BASE_ADDR(n)
|
||||
|
||||
#define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT)
|
||||
|
||||
#ifdef CONFIG_DEBUG_IMX1_UART
|
||||
|
|
@ -103,6 +112,8 @@
|
|||
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q)
|
||||
#elif defined(CONFIG_DEBUG_IMX6SL_UART)
|
||||
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL)
|
||||
#elif defined(CONFIG_DEBUG_IMX6SX_UART)
|
||||
#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX)
|
||||
#endif
|
||||
|
||||
#endif /* __DEBUG_IMX_UART_H */
|
||||
|
|
|
|||
|
|
@ -15,51 +15,15 @@
|
|||
*
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_QSD8X50)
|
||||
#define MSM_UART1_PHYS 0xA9A00000
|
||||
#define MSM_UART2_PHYS 0xA9B00000
|
||||
#define MSM_UART3_PHYS 0xA9C00000
|
||||
#elif defined(CONFIG_ARCH_MSM7X30)
|
||||
#define MSM_UART1_PHYS 0xACA00000
|
||||
#define MSM_UART2_PHYS 0xACB00000
|
||||
#define MSM_UART3_PHYS 0xACC00000
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_DEBUG_MSM_UART1)
|
||||
#define MSM_DEBUG_UART_BASE 0xE1000000
|
||||
#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS
|
||||
#elif defined(CONFIG_DEBUG_MSM_UART2)
|
||||
#define MSM_DEBUG_UART_BASE 0xE1000000
|
||||
#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS
|
||||
#elif defined(CONFIG_DEBUG_MSM_UART3)
|
||||
#define MSM_DEBUG_UART_BASE 0xE1000000
|
||||
#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_DEBUG_MSM8660_UART
|
||||
#define MSM_DEBUG_UART_BASE 0xF0040000
|
||||
#define MSM_DEBUG_UART_PHYS 0x19C40000
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_DEBUG_MSM8960_UART
|
||||
#define MSM_DEBUG_UART_BASE 0xF0040000
|
||||
#define MSM_DEBUG_UART_PHYS 0x16440000
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_DEBUG_MSM8974_UART
|
||||
#define MSM_DEBUG_UART_BASE 0xFA71E000
|
||||
#define MSM_DEBUG_UART_PHYS 0xF991E000
|
||||
#endif
|
||||
|
||||
.macro addruart, rp, rv, tmp
|
||||
#ifdef MSM_DEBUG_UART_PHYS
|
||||
ldr \rp, =MSM_DEBUG_UART_PHYS
|
||||
ldr \rv, =MSM_DEBUG_UART_BASE
|
||||
#ifdef CONFIG_DEBUG_UART_PHYS
|
||||
ldr \rp, =CONFIG_DEBUG_UART_PHYS
|
||||
ldr \rv, =CONFIG_DEBUG_UART_VIRT
|
||||
#endif
|
||||
.endm
|
||||
|
||||
.macro senduart, rd, rx
|
||||
#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
|
||||
#ifdef CONFIG_DEBUG_QCOM_UARTDM
|
||||
@ Write the 1 character to UARTDM_TF
|
||||
str \rd, [\rx, #0x70]
|
||||
#else
|
||||
|
|
@ -68,7 +32,7 @@
|
|||
.endm
|
||||
|
||||
.macro waituart, rd, rx
|
||||
#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
|
||||
#ifdef CONFIG_DEBUG_QCOM_UARTDM
|
||||
@ check for TX_EMT in UARTDM_SR
|
||||
ldr \rd, [\rx, #0x08]
|
||||
tst \rd, #0x08
|
||||
|
|
|
|||
|
|
@ -7,9 +7,20 @@
|
|||
*
|
||||
*/
|
||||
|
||||
#define VF_UART0_BASE_ADDR 0x40027000
|
||||
#define VF_UART1_BASE_ADDR 0x40028000
|
||||
#define VF_UART2_BASE_ADDR 0x40029000
|
||||
#define VF_UART3_BASE_ADDR 0x4002a000
|
||||
#define VF_UART_BASE_ADDR(n) VF_UART##n##_BASE_ADDR
|
||||
#define VF_UART_BASE(n) VF_UART_BASE_ADDR(n)
|
||||
#define VF_UART_PHYSICAL_BASE VF_UART_BASE(CONFIG_DEBUG_VF_UART_PORT)
|
||||
|
||||
#define VF_UART_VIRTUAL_BASE 0xfe000000
|
||||
|
||||
.macro addruart, rp, rv, tmp
|
||||
ldr \rp, =0x40028000 @ physical
|
||||
ldr \rv, =0xfe028000 @ virtual
|
||||
ldr \rp, =VF_UART_PHYSICAL_BASE @ physical
|
||||
and \rv, \rp, #0xffffff @ offset within 16MB section
|
||||
add \rv, \rv, #VF_UART_VIRTUAL_BASE
|
||||
.endm
|
||||
|
||||
.macro senduart, rd, rx
|
||||
|
|
|
|||
|
|
@ -20,18 +20,18 @@
|
|||
#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
|
||||
|
||||
#define UART0_PHYS 0xE0000000
|
||||
#define UART0_VIRT 0xF0000000
|
||||
#define UART1_PHYS 0xE0001000
|
||||
#define UART_SIZE SZ_4K
|
||||
#define UART_VIRT 0xF0001000
|
||||
#define UART1_VIRT 0xF0001000
|
||||
|
||||
#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
|
||||
# define LL_UART_PADDR UART1_PHYS
|
||||
# define LL_UART_VADDR UART1_VIRT
|
||||
#else
|
||||
# define LL_UART_PADDR UART0_PHYS
|
||||
# define LL_UART_VADDR UART0_VIRT
|
||||
#endif
|
||||
|
||||
#define LL_UART_VADDR UART_VIRT
|
||||
|
||||
.macro addruart, rp, rv, tmp
|
||||
ldr \rp, =LL_UART_PADDR @ physical
|
||||
ldr \rv, =LL_UART_VADDR @ virtual
|
||||
|
|
@ -43,12 +43,14 @@
|
|||
|
||||
.macro waituart,rd,rx
|
||||
1001: ldr \rd, [\rx, #UART_SR_OFFSET]
|
||||
ARM_BE8( rev \rd, \rd )
|
||||
tst \rd, #UART_SR_TXEMPTY
|
||||
beq 1001b
|
||||
.endm
|
||||
|
||||
.macro busyuart,rd,rx
|
||||
1002: ldr \rd, [\rx, #UART_SR_OFFSET] @ get status register
|
||||
ARM_BE8( rev \rd, \rd )
|
||||
tst \rd, #UART_SR_TXFULL @
|
||||
bne 1002b @ wait if FIFO is full
|
||||
.endm
|
||||
|
|
|
|||
|
|
@ -25,6 +25,7 @@
|
|||
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -24,12 +24,11 @@
|
|||
#include <mach/at91sam9260_matrix.h>
|
||||
#include <mach/at91_matrix.h>
|
||||
#include <mach/at91sam9_smc.h>
|
||||
#include <mach/at91_adc.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
|
||||
#include "gpio.h"
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* USB Host
|
||||
|
|
@ -1325,13 +1324,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct at91_adc_reg_desc at91_adc_register_g20 = {
|
||||
.channel_base = AT91_ADC_CHR(0),
|
||||
.drdy_mask = AT91_ADC_DRDY,
|
||||
.status_register = AT91_ADC_SR,
|
||||
.trigger_register = AT91_ADC_MR,
|
||||
};
|
||||
|
||||
void __init at91_add_device_adc(struct at91_adc_data *data)
|
||||
{
|
||||
if (!data)
|
||||
|
|
@ -1349,9 +1341,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data)
|
|||
if (data->use_external_triggers)
|
||||
at91_set_A_periph(AT91_PIN_PA22, 0);
|
||||
|
||||
data->num_channels = 4;
|
||||
data->startup_time = 10;
|
||||
data->registers = &at91_adc_register_g20;
|
||||
data->trigger_number = 4;
|
||||
data->trigger_list = at91_adc_triggers;
|
||||
|
||||
|
|
|
|||
|
|
@ -29,7 +29,7 @@
|
|||
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
|
||||
#include "gpio.h"
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* USB Host
|
||||
|
|
|
|||
|
|
@ -28,6 +28,7 @@
|
|||
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
|
|
|
|||
|
|
@ -182,7 +182,7 @@ static struct clk vdec_clk = {
|
|||
static struct clk adc_op_clk = {
|
||||
.name = "adc_op_clk",
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
.rate_hz = 13200000,
|
||||
.rate_hz = 300000,
|
||||
};
|
||||
|
||||
/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */
|
||||
|
|
|
|||
|
|
@ -25,7 +25,6 @@
|
|||
#include <linux/fb.h>
|
||||
#include <video/atmel_lcdc.h>
|
||||
|
||||
#include <mach/at91_adc.h>
|
||||
#include <mach/at91sam9g45.h>
|
||||
#include <mach/at91sam9g45_matrix.h>
|
||||
#include <mach/at91_matrix.h>
|
||||
|
|
@ -39,6 +38,7 @@
|
|||
#include "board.h"
|
||||
#include "generic.h"
|
||||
#include "clock.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
|
|
@ -1133,58 +1133,7 @@ static void __init at91_add_device_rtc(void) {}
|
|||
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* Touchscreen
|
||||
* -------------------------------------------------------------------- */
|
||||
|
||||
#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
|
||||
static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
|
||||
static struct at91_tsadcc_data tsadcc_data;
|
||||
|
||||
static struct resource tsadcc_resources[] = {
|
||||
[0] = {
|
||||
.start = AT91SAM9G45_BASE_TSC,
|
||||
.end = AT91SAM9G45_BASE_TSC + SZ_16K - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
|
||||
.end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
}
|
||||
};
|
||||
|
||||
static struct platform_device at91sam9g45_tsadcc_device = {
|
||||
.name = "atmel_tsadcc",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.dma_mask = &tsadcc_dmamask,
|
||||
.coherent_dma_mask = DMA_BIT_MASK(32),
|
||||
.platform_data = &tsadcc_data,
|
||||
},
|
||||
.resource = tsadcc_resources,
|
||||
.num_resources = ARRAY_SIZE(tsadcc_resources),
|
||||
};
|
||||
|
||||
void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
|
||||
{
|
||||
if (!data)
|
||||
return;
|
||||
|
||||
at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */
|
||||
at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */
|
||||
at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */
|
||||
at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */
|
||||
|
||||
tsadcc_data = *data;
|
||||
platform_device_register(&at91sam9g45_tsadcc_device);
|
||||
}
|
||||
#else
|
||||
void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
|
||||
#endif
|
||||
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* ADC
|
||||
* ADC and touchscreen
|
||||
* -------------------------------------------------------------------- */
|
||||
|
||||
#if IS_ENABLED(CONFIG_AT91_ADC)
|
||||
|
|
@ -1236,13 +1185,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct at91_adc_reg_desc at91_adc_register_g45 = {
|
||||
.channel_base = AT91_ADC_CHR(0),
|
||||
.drdy_mask = AT91_ADC_DRDY,
|
||||
.status_register = AT91_ADC_SR,
|
||||
.trigger_register = 0x08,
|
||||
};
|
||||
|
||||
void __init at91_add_device_adc(struct at91_adc_data *data)
|
||||
{
|
||||
if (!data)
|
||||
|
|
@ -1268,9 +1210,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data)
|
|||
if (data->use_external_triggers)
|
||||
at91_set_A_periph(AT91_PIN_PD28, 0);
|
||||
|
||||
data->num_channels = 8;
|
||||
data->startup_time = 40;
|
||||
data->registers = &at91_adc_register_g45;
|
||||
data->trigger_number = 4;
|
||||
data->trigger_list = at91_adc_triggers;
|
||||
|
||||
|
|
|
|||
|
|
@ -153,6 +153,11 @@ static struct clk ac97_clk = {
|
|||
.pmc_mask = 1 << AT91SAM9RL_ID_AC97C,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk adc_op_clk = {
|
||||
.name = "adc_op_clk",
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
.rate_hz = 1000000,
|
||||
};
|
||||
|
||||
static struct clk *periph_clocks[] __initdata = {
|
||||
&pioA_clk,
|
||||
|
|
@ -178,6 +183,7 @@ static struct clk *periph_clocks[] __initdata = {
|
|||
&udphs_clk,
|
||||
&lcdc_clk,
|
||||
&ac97_clk,
|
||||
&adc_op_clk,
|
||||
// irq0
|
||||
};
|
||||
|
||||
|
|
@ -216,6 +222,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
|
|||
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
|
||||
CLKDEV_CON_ID("adc_clk", &tsc_clk),
|
||||
};
|
||||
|
||||
static struct clk_lookup usart_clocks_lookups[] = {
|
||||
|
|
|
|||
|
|
@ -23,9 +23,11 @@
|
|||
#include <mach/at91sam9_smc.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <linux/platform_data/dma-atmel.h>
|
||||
#include <linux/platform_data/at91_adc.h>
|
||||
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
|
|
@ -608,14 +610,13 @@ static void __init at91_add_device_tc(void) { }
|
|||
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* Touchscreen
|
||||
* ADC and Touchscreen
|
||||
* -------------------------------------------------------------------- */
|
||||
|
||||
#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
|
||||
static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
|
||||
static struct at91_tsadcc_data tsadcc_data;
|
||||
#if IS_ENABLED(CONFIG_AT91_ADC)
|
||||
static struct at91_adc_data adc_data;
|
||||
|
||||
static struct resource tsadcc_resources[] = {
|
||||
static struct resource adc_resources[] = {
|
||||
[0] = {
|
||||
.start = AT91SAM9RL_BASE_TSC,
|
||||
.end = AT91SAM9RL_BASE_TSC + SZ_16K - 1,
|
||||
|
|
@ -628,36 +629,71 @@ static struct resource tsadcc_resources[] = {
|
|||
}
|
||||
};
|
||||
|
||||
static struct platform_device at91sam9rl_tsadcc_device = {
|
||||
.name = "atmel_tsadcc",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.dma_mask = &tsadcc_dmamask,
|
||||
.coherent_dma_mask = DMA_BIT_MASK(32),
|
||||
.platform_data = &tsadcc_data,
|
||||
static struct platform_device at91_adc_device = {
|
||||
.name = "at91sam9rl-adc",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &adc_data,
|
||||
},
|
||||
.resource = tsadcc_resources,
|
||||
.num_resources = ARRAY_SIZE(tsadcc_resources),
|
||||
.resource = adc_resources,
|
||||
.num_resources = ARRAY_SIZE(adc_resources),
|
||||
};
|
||||
|
||||
void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
|
||||
static struct at91_adc_trigger at91_adc_triggers[] = {
|
||||
[0] = {
|
||||
.name = "external-rising",
|
||||
.value = 1,
|
||||
.is_external = true,
|
||||
},
|
||||
[1] = {
|
||||
.name = "external-falling",
|
||||
.value = 2,
|
||||
.is_external = true,
|
||||
},
|
||||
[2] = {
|
||||
.name = "external-any",
|
||||
.value = 3,
|
||||
.is_external = true,
|
||||
},
|
||||
[3] = {
|
||||
.name = "continuous",
|
||||
.value = 6,
|
||||
.is_external = false,
|
||||
},
|
||||
};
|
||||
|
||||
void __init at91_add_device_adc(struct at91_adc_data *data)
|
||||
{
|
||||
if (!data)
|
||||
return;
|
||||
|
||||
at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */
|
||||
at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */
|
||||
at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */
|
||||
at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */
|
||||
if (test_bit(0, &data->channels_used))
|
||||
at91_set_A_periph(AT91_PIN_PA17, 0);
|
||||
if (test_bit(1, &data->channels_used))
|
||||
at91_set_A_periph(AT91_PIN_PA18, 0);
|
||||
if (test_bit(2, &data->channels_used))
|
||||
at91_set_A_periph(AT91_PIN_PA19, 0);
|
||||
if (test_bit(3, &data->channels_used))
|
||||
at91_set_A_periph(AT91_PIN_PA20, 0);
|
||||
if (test_bit(4, &data->channels_used))
|
||||
at91_set_A_periph(AT91_PIN_PD6, 0);
|
||||
if (test_bit(5, &data->channels_used))
|
||||
at91_set_A_periph(AT91_PIN_PD7, 0);
|
||||
|
||||
tsadcc_data = *data;
|
||||
platform_device_register(&at91sam9rl_tsadcc_device);
|
||||
if (data->use_external_triggers)
|
||||
at91_set_A_periph(AT91_PIN_PB15, 0);
|
||||
|
||||
data->startup_time = 40;
|
||||
data->trigger_number = 4;
|
||||
data->trigger_list = at91_adc_triggers;
|
||||
|
||||
adc_data = *data;
|
||||
platform_device_register(&at91_adc_device);
|
||||
}
|
||||
#else
|
||||
void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
|
||||
void __init at91_add_device_adc(struct at91_adc_data *data) {}
|
||||
#endif
|
||||
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* RTC
|
||||
* -------------------------------------------------------------------- */
|
||||
|
|
|
|||
|
|
@ -39,7 +39,7 @@
|
|||
#include "at91_aic.h"
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
|
||||
#include "gpio.h"
|
||||
|
||||
static void __init onearm_init_early(void)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -46,6 +46,7 @@
|
|||
#include "at91_aic.h"
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
static void __init afeb9260_init_early(void)
|
||||
|
|
|
|||
|
|
@ -44,6 +44,7 @@
|
|||
#include "board.h"
|
||||
#include "sam9_smc.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
static void __init cam60_init_early(void)
|
||||
|
|
|
|||
|
|
@ -39,6 +39,7 @@
|
|||
#include "at91_aic.h"
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
static void __init carmeva_init_early(void)
|
||||
|
|
|
|||
|
|
@ -48,6 +48,7 @@
|
|||
#include "board.h"
|
||||
#include "sam9_smc.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
static void __init cpu9krea_init_early(void)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -43,6 +43,8 @@
|
|||
#include "at91_aic.h"
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
static struct gpio_led cpuat91_leds[] = {
|
||||
{
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@
|
|||
#include "at91_aic.h"
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
|
||||
#include "gpio.h"
|
||||
|
||||
static void __init csb337_init_early(void)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -39,6 +39,7 @@
|
|||
#include "at91_aic.h"
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
static void __init csb637_init_early(void)
|
||||
|
|
|
|||
|
|
@ -38,6 +38,7 @@
|
|||
#include "at91_aic.h"
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
static void __init eb9200_init_early(void)
|
||||
|
|
|
|||
|
|
@ -42,6 +42,7 @@
|
|||
#include "at91_aic.h"
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
static void __init ecb_at91init_early(void)
|
||||
|
|
|
|||
|
|
@ -31,6 +31,8 @@
|
|||
#include "at91_aic.h"
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
static void __init eco920_init_early(void)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -37,6 +37,7 @@
|
|||
#include "at91_aic.h"
|
||||
#include "board.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
static void __init flexibity_init_early(void)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -47,6 +47,7 @@
|
|||
#include "board.h"
|
||||
#include "sam9_smc.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
/*
|
||||
* The FOX Board G20 hardware comes as the "Netus G20" board with
|
||||
|
|
|
|||
|
|
@ -39,6 +39,7 @@
|
|||
#include "generic.h"
|
||||
#include "gsia18s.h"
|
||||
#include "stamp9g20.h"
|
||||
#include "gpio.h"
|
||||
|
||||
static void __init gsia18s_init_early(void)
|
||||
{
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue