i2c: uniphier-f: add suspend / resume support
When resuming, set up registers that have been lost in the sleep state. Also, add clock handling in the resume / suspend hooks. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
parent
9f9d6a4010
commit
822c8d45a1
|
@ -97,6 +97,7 @@ struct uniphier_fi2c_priv {
|
|||
int error;
|
||||
unsigned int flags;
|
||||
unsigned int busy_cnt;
|
||||
unsigned int clk_cycle;
|
||||
};
|
||||
|
||||
static void uniphier_fi2c_fill_txfifo(struct uniphier_fi2c_priv *priv,
|
||||
|
@ -461,9 +462,9 @@ static struct i2c_bus_recovery_info uniphier_fi2c_bus_recovery_info = {
|
|||
.unprepare_recovery = uniphier_fi2c_unprepare_recovery,
|
||||
};
|
||||
|
||||
static void uniphier_fi2c_hw_init(struct uniphier_fi2c_priv *priv,
|
||||
u32 bus_speed, unsigned long clk_rate)
|
||||
static void uniphier_fi2c_hw_init(struct uniphier_fi2c_priv *priv)
|
||||
{
|
||||
unsigned int cyc = priv->clk_cycle;
|
||||
u32 tmp;
|
||||
|
||||
tmp = readl(priv->membase + UNIPHIER_FI2C_CR);
|
||||
|
@ -472,12 +473,10 @@ static void uniphier_fi2c_hw_init(struct uniphier_fi2c_priv *priv,
|
|||
|
||||
uniphier_fi2c_reset(priv);
|
||||
|
||||
tmp = clk_rate / bus_speed;
|
||||
|
||||
writel(tmp, priv->membase + UNIPHIER_FI2C_CYC);
|
||||
writel(tmp / 2, priv->membase + UNIPHIER_FI2C_LCTL);
|
||||
writel(tmp / 2, priv->membase + UNIPHIER_FI2C_SSUT);
|
||||
writel(tmp / 16, priv->membase + UNIPHIER_FI2C_DSUT);
|
||||
writel(cyc, priv->membase + UNIPHIER_FI2C_CYC);
|
||||
writel(cyc / 2, priv->membase + UNIPHIER_FI2C_LCTL);
|
||||
writel(cyc / 2, priv->membase + UNIPHIER_FI2C_SSUT);
|
||||
writel(cyc / 16, priv->membase + UNIPHIER_FI2C_DSUT);
|
||||
|
||||
uniphier_fi2c_prepare_operation(priv);
|
||||
}
|
||||
|
@ -531,6 +530,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
|
|||
goto disable_clk;
|
||||
}
|
||||
|
||||
priv->clk_cycle = clk_rate / bus_speed;
|
||||
init_completion(&priv->comp);
|
||||
priv->adap.owner = THIS_MODULE;
|
||||
priv->adap.algo = &uniphier_fi2c_algo;
|
||||
|
@ -541,7 +541,7 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
|
|||
i2c_set_adapdata(&priv->adap, priv);
|
||||
platform_set_drvdata(pdev, priv);
|
||||
|
||||
uniphier_fi2c_hw_init(priv, bus_speed, clk_rate);
|
||||
uniphier_fi2c_hw_init(priv);
|
||||
|
||||
ret = devm_request_irq(dev, irq, uniphier_fi2c_interrupt, 0,
|
||||
pdev->name, priv);
|
||||
|
@ -568,6 +568,33 @@ static int uniphier_fi2c_remove(struct platform_device *pdev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused uniphier_fi2c_suspend(struct device *dev)
|
||||
{
|
||||
struct uniphier_fi2c_priv *priv = dev_get_drvdata(dev);
|
||||
|
||||
clk_disable_unprepare(priv->clk);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused uniphier_fi2c_resume(struct device *dev)
|
||||
{
|
||||
struct uniphier_fi2c_priv *priv = dev_get_drvdata(dev);
|
||||
int ret;
|
||||
|
||||
ret = clk_prepare_enable(priv->clk);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
uniphier_fi2c_hw_init(priv);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct dev_pm_ops uniphier_fi2c_pm_ops = {
|
||||
SET_SYSTEM_SLEEP_PM_OPS(uniphier_fi2c_suspend, uniphier_fi2c_resume)
|
||||
};
|
||||
|
||||
static const struct of_device_id uniphier_fi2c_match[] = {
|
||||
{ .compatible = "socionext,uniphier-fi2c" },
|
||||
{ /* sentinel */ }
|
||||
|
@ -580,6 +607,7 @@ static struct platform_driver uniphier_fi2c_drv = {
|
|||
.driver = {
|
||||
.name = "uniphier-fi2c",
|
||||
.of_match_table = uniphier_fi2c_match,
|
||||
.pm = &uniphier_fi2c_pm_ops,
|
||||
},
|
||||
};
|
||||
module_platform_driver(uniphier_fi2c_drv);
|
||||
|
|
Loading…
Reference in New Issue