[PATCH] m68knommu: common RAM based 68360 startup code
Create common start code for all 68360 based platforms that are loaded and run directly from RAM (as opposed to running from flash/ROM). This replaces the old specific startup code for each board. Signed-off-by: Greg Ungerer <gerg@uclinux.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Greg Ungerer
Linus Torvalds
parent
d871629b83
commit
81d4903d2d
|
|
@ -0,0 +1,408 @@
|
|||
/* arch/m68knommu/platform/68360/head-ram.S
|
||||
*
|
||||
* Startup code for Motorola 68360
|
||||
*
|
||||
* Copyright 2001 (C) SED Systems, a Division of Calian Ltd.
|
||||
* Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S
|
||||
* Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7
|
||||
* uClinux Kernel
|
||||
* Copyright (C) Michael Leslie <mleslie@lineo.com>
|
||||
* Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S
|
||||
* Copyright (C) 1998 D. Jeff Dionne <jeff@uclinux.org>,
|
||||
*
|
||||
*/
|
||||
#define ASSEMBLY
|
||||
#include <linux/config.h>
|
||||
|
||||
.global _stext
|
||||
.global _start
|
||||
|
||||
.global _rambase
|
||||
.global __ramvec
|
||||
.global _ramvec
|
||||
.global _ramstart
|
||||
.global _ramend
|
||||
|
||||
.global _quicc_base
|
||||
.global _periph_base
|
||||
|
||||
#define REGB 0x1000
|
||||
#define PEPAR (_dprbase + REGB + 0x0016)
|
||||
#define GMR (_dprbase + REGB + 0x0040)
|
||||
#define OR0 (_dprbase + REGB + 0x0054)
|
||||
#define BR0 (_dprbase + REGB + 0x0050)
|
||||
#define OR1 (_dprbase + REGB + 0x0064)
|
||||
#define BR1 (_dprbase + REGB + 0x0060)
|
||||
#define OR4 (_dprbase + REGB + 0x0094)
|
||||
#define BR4 (_dprbase + REGB + 0x0090)
|
||||
#define OR6 (_dprbase + REGB + 0x00b4)
|
||||
#define BR6 (_dprbase + REGB + 0x00b0)
|
||||
#define OR7 (_dprbase + REGB + 0x00c4)
|
||||
#define BR7 (_dprbase + REGB + 0x00c0)
|
||||
|
||||
#define MCR (_dprbase + REGB + 0x0000)
|
||||
#define AVR (_dprbase + REGB + 0x0008)
|
||||
|
||||
#define SYPCR (_dprbase + REGB + 0x0022)
|
||||
|
||||
#define PLLCR (_dprbase + REGB + 0x0010)
|
||||
#define CLKOCR (_dprbase + REGB + 0x000C)
|
||||
#define CDVCR (_dprbase + REGB + 0x0014)
|
||||
|
||||
#define BKAR (_dprbase + REGB + 0x0030)
|
||||
#define BKCR (_dprbase + REGB + 0x0034)
|
||||
#define SWIV (_dprbase + REGB + 0x0023)
|
||||
#define PICR (_dprbase + REGB + 0x0026)
|
||||
#define PITR (_dprbase + REGB + 0x002A)
|
||||
|
||||
/* Define for all memory configuration */
|
||||
#define MCU_SIM_GMR 0x00000000
|
||||
#define SIM_OR_MASK 0x0fffffff
|
||||
|
||||
/* Defines for chip select zero - the flash */
|
||||
#define SIM_OR0_MASK 0x20000002
|
||||
#define SIM_BR0_MASK 0x00000001
|
||||
|
||||
|
||||
/* Defines for chip select one - the RAM */
|
||||
#define SIM_OR1_MASK 0x10000000
|
||||
#define SIM_BR1_MASK 0x00000001
|
||||
|
||||
#define MCU_SIM_MBAR_ADRS 0x0003ff00
|
||||
#define MCU_SIM_MBAR_BA_MASK 0xfffff000
|
||||
#define MCU_SIM_MBAR_AS_MASK 0x00000001
|
||||
|
||||
#define MCU_SIM_PEPAR 0x00B4
|
||||
|
||||
#define MCU_DISABLE_INTRPTS 0x2700
|
||||
#define MCU_SIM_AVR 0x00
|
||||
|
||||
#define MCU_SIM_MCR 0x00005cff
|
||||
|
||||
#define MCU_SIM_CLKOCR 0x00
|
||||
#define MCU_SIM_PLLCR 0x8000
|
||||
#define MCU_SIM_CDVCR 0x0000
|
||||
|
||||
#define MCU_SIM_SYPCR 0x0000
|
||||
#define MCU_SIM_SWIV 0x00
|
||||
#define MCU_SIM_PICR 0x0000
|
||||
#define MCU_SIM_PITR 0x0000
|
||||
|
||||
|
||||
#include <asm/m68360_regs.h>
|
||||
|
||||
|
||||
/*
|
||||
* By the time this RAM specific code begins to execute, DPRAM
|
||||
* and DRAM should already be mapped and accessible.
|
||||
*/
|
||||
|
||||
.text
|
||||
_start:
|
||||
_stext:
|
||||
nop
|
||||
ori.w #MCU_DISABLE_INTRPTS, %sr /* disable interrupts: */
|
||||
/* We should not need to setup the boot stack the reset should do it. */
|
||||
movea.l #__ramend, %sp /*set up stack at the end of DRAM:*/
|
||||
|
||||
set_mbar_register:
|
||||
moveq.l #0x07, %d1 /* Setup MBAR */
|
||||
movec %d1, %dfc
|
||||
|
||||
lea.l MCU_SIM_MBAR_ADRS, %a0
|
||||
move.l #_dprbase, %d0
|
||||
andi.l #MCU_SIM_MBAR_BA_MASK, %d0
|
||||
ori.l #MCU_SIM_MBAR_AS_MASK, %d0
|
||||
moves.l %d0, %a0@
|
||||
|
||||
moveq.l #0x05, %d1
|
||||
movec.l %d1, %dfc
|
||||
|
||||
/* Now we can begin to access registers in DPRAM */
|
||||
|
||||
set_sim_mcr:
|
||||
/* Set Module Configuration Register */
|
||||
move.l #MCU_SIM_MCR, MCR
|
||||
|
||||
/* to do: Determine cause of reset */
|
||||
|
||||
/*
|
||||
* configure system clock MC68360 p. 6-40
|
||||
* (value +1)*osc/128 = system clock
|
||||
*/
|
||||
set_sim_clock:
|
||||
move.w #MCU_SIM_PLLCR, PLLCR
|
||||
move.b #MCU_SIM_CLKOCR, CLKOCR
|
||||
move.w #MCU_SIM_CDVCR, CDVCR
|
||||
|
||||
/* Wait for the PLL to settle */
|
||||
move.w #16384, %d0
|
||||
pll_settle_wait:
|
||||
subi.w #1, %d0
|
||||
bne pll_settle_wait
|
||||
|
||||
/* Setup the system protection register, and watchdog timer register */
|
||||
move.b #MCU_SIM_SWIV, SWIV
|
||||
move.w #MCU_SIM_PICR, PICR
|
||||
move.w #MCU_SIM_PITR, PITR
|
||||
move.w #MCU_SIM_SYPCR, SYPCR
|
||||
|
||||
/* Clear DPRAM - system + parameter */
|
||||
movea.l #_dprbase, %a0
|
||||
movea.l #_dprbase+0x2000, %a1
|
||||
|
||||
/* Copy 0 to %a0 until %a0 == %a1 */
|
||||
clear_dpram:
|
||||
movel #0, %a0@+
|
||||
cmpal %a0, %a1
|
||||
bhi clear_dpram
|
||||
|
||||
configure_memory_controller:
|
||||
/* Set up Global Memory Register (GMR) */
|
||||
move.l #MCU_SIM_GMR, %d0
|
||||
move.l %d0, GMR
|
||||
|
||||
configure_chip_select_0:
|
||||
move.l #__ramend, %d0
|
||||
subi.l #__ramstart, %d0
|
||||
subq.l #0x01, %d0
|
||||
eori.l #SIM_OR_MASK, %d0
|
||||
ori.l #SIM_OR0_MASK, %d0
|
||||
move.l %d0, OR0
|
||||
|
||||
move.l #__ramstart, %d0
|
||||
ori.l #SIM_BR0_MASK, %d0
|
||||
move.l %d0, BR0
|
||||
|
||||
configure_chip_select_1:
|
||||
move.l #__rom_end, %d0
|
||||
subi.l #__rom_start, %d0
|
||||
subq.l #0x01, %d0
|
||||
eori.l #SIM_OR_MASK, %d0
|
||||
ori.l #SIM_OR1_MASK, %d0
|
||||
move.l %d0, OR1
|
||||
|
||||
move.l #__rom_start, %d0
|
||||
ori.l #SIM_BR1_MASK, %d0
|
||||
move.l %d0, BR1
|
||||
|
||||
move.w #MCU_SIM_PEPAR, PEPAR
|
||||
|
||||
/* point to vector table: */
|
||||
move.l #_romvec, %a0
|
||||
move.l #_ramvec, %a1
|
||||
copy_vectors:
|
||||
move.l %a0@, %d0
|
||||
move.l %d0, %a1@
|
||||
move.l %a0@, %a1@
|
||||
addq.l #0x04, %a0
|
||||
addq.l #0x04, %a1
|
||||
cmp.l #_start, %a0
|
||||
blt copy_vectors
|
||||
|
||||
move.l #_ramvec, %a1
|
||||
movec %a1, %vbr
|
||||
|
||||
|
||||
/* Copy data segment from ROM to RAM */
|
||||
moveal #_stext, %a0
|
||||
moveal #_sdata, %a1
|
||||
moveal #_edata, %a2
|
||||
|
||||
/* Copy %a0 to %a1 until %a1 == %a2 */
|
||||
LD1:
|
||||
move.l %a0@, %d0
|
||||
addq.l #0x04, %a0
|
||||
move.l %d0, %a1@
|
||||
addq.l #0x04, %a1
|
||||
cmp.l #_edata, %a1
|
||||
blt LD1
|
||||
|
||||
moveal #_sbss, %a0
|
||||
moveal #_ebss, %a1
|
||||
|
||||
/* Copy 0 to %a0 until %a0 == %a1 */
|
||||
L1:
|
||||
movel #0, %a0@+
|
||||
cmpal %a0, %a1
|
||||
bhi L1
|
||||
|
||||
load_quicc:
|
||||
move.l #_dprbase, _quicc_base
|
||||
|
||||
store_ram_size:
|
||||
/* Set ram size information */
|
||||
move.l #_sdata, _rambase
|
||||
move.l #_ebss, _ramstart
|
||||
move.l #__ramend, %d0
|
||||
sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/
|
||||
move.l %d0, _ramend /* Different from __ramend.*/
|
||||
|
||||
store_flash_size:
|
||||
/* Set rom size information */
|
||||
move.l #__rom_end, %d0
|
||||
sub.l #__rom_start, %d0
|
||||
move.l %d0, rom_length
|
||||
|
||||
pea 0
|
||||
pea env
|
||||
pea %sp@(4)
|
||||
pea 0
|
||||
|
||||
lea init_thread_union, %a2
|
||||
lea 0x2000(%a2), %sp
|
||||
|
||||
lp:
|
||||
jsr start_kernel
|
||||
|
||||
_exit:
|
||||
jmp _exit
|
||||
|
||||
|
||||
.data
|
||||
.align 4
|
||||
env:
|
||||
.long 0
|
||||
_quicc_base:
|
||||
.long 0
|
||||
_periph_base:
|
||||
.long 0
|
||||
_ramvec:
|
||||
.long 0
|
||||
_rambase:
|
||||
.long 0
|
||||
_ramstart:
|
||||
.long 0
|
||||
_ramend:
|
||||
.long 0
|
||||
_dprbase:
|
||||
.long 0xffffe000
|
||||
|
||||
.text
|
||||
|
||||
/*
|
||||
* These are the exception vectors at boot up, they are copied into RAM
|
||||
* and then overwritten as needed.
|
||||
*/
|
||||
|
||||
.section ".data.initvect","awx"
|
||||
.long __ramend /* Reset: Initial Stack Pointer - 0. */
|
||||
.long _start /* Reset: Initial Program Counter - 1. */
|
||||
.long buserr /* Bus Error - 2. */
|
||||
.long trap /* Address Error - 3. */
|
||||
.long trap /* Illegal Instruction - 4. */
|
||||
.long trap /* Divide by zero - 5. */
|
||||
.long trap /* CHK, CHK2 Instructions - 6. */
|
||||
.long trap /* TRAPcc, TRAPV Instructions - 7. */
|
||||
.long trap /* Privilege Violation - 8. */
|
||||
.long trap /* Trace - 9. */
|
||||
.long trap /* Line 1010 Emulator - 10. */
|
||||
.long trap /* Line 1111 Emualtor - 11. */
|
||||
.long trap /* Harware Breakpoint - 12. */
|
||||
.long trap /* (Reserved for Coprocessor Protocol Violation)- 13. */
|
||||
.long trap /* Format Error - 14. */
|
||||
.long trap /* Uninitialized Interrupt - 15. */
|
||||
.long trap /* (Unassigned, Reserver) - 16. */
|
||||
.long trap /* (Unassigned, Reserver) - 17. */
|
||||
.long trap /* (Unassigned, Reserver) - 18. */
|
||||
.long trap /* (Unassigned, Reserver) - 19. */
|
||||
.long trap /* (Unassigned, Reserver) - 20. */
|
||||
.long trap /* (Unassigned, Reserver) - 21. */
|
||||
.long trap /* (Unassigned, Reserver) - 22. */
|
||||
.long trap /* (Unassigned, Reserver) - 23. */
|
||||
.long trap /* Spurious Interrupt - 24. */
|
||||
.long trap /* Level 1 Interrupt Autovector - 25. */
|
||||
.long trap /* Level 2 Interrupt Autovector - 26. */
|
||||
.long trap /* Level 3 Interrupt Autovector - 27. */
|
||||
.long trap /* Level 4 Interrupt Autovector - 28. */
|
||||
.long trap /* Level 5 Interrupt Autovector - 29. */
|
||||
.long trap /* Level 6 Interrupt Autovector - 30. */
|
||||
.long trap /* Level 7 Interrupt Autovector - 31. */
|
||||
.long system_call /* Trap Instruction Vectors 0 - 32. */
|
||||
.long trap /* Trap Instruction Vectors 1 - 33. */
|
||||
.long trap /* Trap Instruction Vectors 2 - 34. */
|
||||
.long trap /* Trap Instruction Vectors 3 - 35. */
|
||||
.long trap /* Trap Instruction Vectors 4 - 36. */
|
||||
.long trap /* Trap Instruction Vectors 5 - 37. */
|
||||
.long trap /* Trap Instruction Vectors 6 - 38. */
|
||||
.long trap /* Trap Instruction Vectors 7 - 39. */
|
||||
.long trap /* Trap Instruction Vectors 8 - 40. */
|
||||
.long trap /* Trap Instruction Vectors 9 - 41. */
|
||||
.long trap /* Trap Instruction Vectors 10 - 42. */
|
||||
.long trap /* Trap Instruction Vectors 11 - 43. */
|
||||
.long trap /* Trap Instruction Vectors 12 - 44. */
|
||||
.long trap /* Trap Instruction Vectors 13 - 45. */
|
||||
.long trap /* Trap Instruction Vectors 14 - 46. */
|
||||
.long trap /* Trap Instruction Vectors 15 - 47. */
|
||||
.long 0 /* (Reserved for Coprocessor) - 48. */
|
||||
.long 0 /* (Reserved for Coprocessor) - 49. */
|
||||
.long 0 /* (Reserved for Coprocessor) - 50. */
|
||||
.long 0 /* (Reserved for Coprocessor) - 51. */
|
||||
.long 0 /* (Reserved for Coprocessor) - 52. */
|
||||
.long 0 /* (Reserved for Coprocessor) - 53. */
|
||||
.long 0 /* (Reserved for Coprocessor) - 54. */
|
||||
.long 0 /* (Reserved for Coprocessor) - 55. */
|
||||
.long 0 /* (Reserved for Coprocessor) - 56. */
|
||||
.long 0 /* (Reserved for Coprocessor) - 57. */
|
||||
.long 0 /* (Reserved for Coprocessor) - 58. */
|
||||
.long 0 /* (Unassigned, Reserved) - 59. */
|
||||
.long 0 /* (Unassigned, Reserved) - 60. */
|
||||
.long 0 /* (Unassigned, Reserved) - 61. */
|
||||
.long 0 /* (Unassigned, Reserved) - 62. */
|
||||
.long 0 /* (Unassigned, Reserved) - 63. */
|
||||
/* The assignment of these vectors to the CPM is */
|
||||
/* dependent on the configuration of the CPM vba */
|
||||
/* fields. */
|
||||
.long 0 /* (User-Defined Vectors 1) CPM Error - 64. */
|
||||
.long 0 /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */
|
||||
.long 0 /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */
|
||||
.long 0 /* (User-Defined Vectors 4) CPM SMC2 / PIP - 67. */
|
||||
.long 0 /* (User-Defined Vectors 5) CPM SMC1 - 68. */
|
||||
.long 0 /* (User-Defined Vectors 6) CPM SPI - 69. */
|
||||
.long 0 /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */
|
||||
.long 0 /* (User-Defined Vectors 8) CPM Timer 4 - 71. */
|
||||
.long 0 /* (User-Defined Vectors 9) CPM Reserved - 72. */
|
||||
.long 0 /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */
|
||||
.long 0 /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */
|
||||
.long 0 /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */
|
||||
.long 0 /* (User-Defined Vectors 13) CPM Timer 3 - 76. */
|
||||
.long 0 /* (User-Defined Vectors 14) CPM Reserved - 77. */
|
||||
.long 0 /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */
|
||||
.long 0 /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */
|
||||
.long 0 /* (User-Defined Vectors 17) CPM Reserved - 80. */
|
||||
.long 0 /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */
|
||||
.long 0 /* (User-Defined Vectors 19) CPM Timer 2 - 82. */
|
||||
.long 0 /* (User-Defined Vectors 21) CPM Reserved - 83. */
|
||||
.long 0 /* (User-Defined Vectors 22) CPM IDMA2 - 84. */
|
||||
.long 0 /* (User-Defined Vectors 23) CPM IDMA1 - 85. */
|
||||
.long 0 /* (User-Defined Vectors 24) CPM SDMA Bus Err - 86. */
|
||||
.long 0 /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */
|
||||
.long 0 /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */
|
||||
.long 0 /* (User-Defined Vectors 27) CPM Timer 1 - 89. */
|
||||
.long 0 /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */
|
||||
.long 0 /* (User-Defined Vectors 29) CPM SCC 4 - 91. */
|
||||
.long 0 /* (User-Defined Vectors 30) CPM SCC 3 - 92. */
|
||||
.long 0 /* (User-Defined Vectors 31) CPM SCC 2 - 93. */
|
||||
.long 0 /* (User-Defined Vectors 32) CPM SCC 1 - 94. */
|
||||
.long 0 /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */
|
||||
/* I don't think anything uses the vectors after here. */
|
||||
.long 0 /* (User-Defined Vectors 34) - 96. */
|
||||
.long 0,0,0,0,0 /* (User-Defined Vectors 35 - 39). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 40 - 49). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 50 - 59). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 60 - 69). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 70 - 79). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 80 - 89). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 90 - 99). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 100 - 109). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 110 - 119). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 120 - 129). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 130 - 139). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 140 - 149). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 150 - 159). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 160 - 169). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 170 - 179). */
|
||||
.long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 180 - 189). */
|
||||
.long 0,0,0 /* (User-Defined Vectors 190 - 192). */
|
||||
.text
|
||||
ignore: rte
|
||||
Loading…
Reference in New Issue