ALSA: snd-atmel-ac97c: do a proper reset of the external codec
This patch will enable the AC97C before resetting the external codec, leaving the AC97C disabled will result in floating I/O lines that can affect the reset procedure. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
parent
df163587ea
commit
81baf3a7f6
|
@ -730,17 +730,17 @@ static bool filter(struct dma_chan *chan, void *slave)
|
|||
|
||||
static void atmel_ac97c_reset(struct atmel_ac97c *chip)
|
||||
{
|
||||
ac97c_writel(chip, MR, AC97C_MR_WRST);
|
||||
ac97c_writel(chip, MR, 0);
|
||||
ac97c_writel(chip, MR, AC97C_MR_ENA);
|
||||
ac97c_writel(chip, CAMR, 0);
|
||||
ac97c_writel(chip, COMR, 0);
|
||||
|
||||
if (gpio_is_valid(chip->reset_pin)) {
|
||||
gpio_set_value(chip->reset_pin, 0);
|
||||
/* AC97 v2.2 specifications says minimum 1 us. */
|
||||
udelay(10);
|
||||
udelay(2);
|
||||
gpio_set_value(chip->reset_pin, 1);
|
||||
}
|
||||
|
||||
udelay(1);
|
||||
ac97c_writel(chip, MR, AC97C_MR_ENA);
|
||||
}
|
||||
|
||||
static int __devinit atmel_ac97c_probe(struct platform_device *pdev)
|
||||
|
@ -826,6 +826,8 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev)
|
|||
|
||||
snd_card_set_dev(card, &pdev->dev);
|
||||
|
||||
atmel_ac97c_reset(chip);
|
||||
|
||||
/* Enable overrun interrupt from codec channel */
|
||||
ac97c_writel(chip, COMR, AC97C_CSR_OVRUN);
|
||||
ac97c_writel(chip, IER, ac97c_readl(chip, IMR) | AC97C_SR_COEVT);
|
||||
|
@ -836,8 +838,6 @@ static int __devinit atmel_ac97c_probe(struct platform_device *pdev)
|
|||
goto err_ac97_bus;
|
||||
}
|
||||
|
||||
atmel_ac97c_reset(chip);
|
||||
|
||||
retval = atmel_ac97c_mixer_new(chip);
|
||||
if (retval) {
|
||||
dev_dbg(&pdev->dev, "could not register ac97 mixer\n");
|
||||
|
|
Loading…
Reference in New Issue