UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

ARM: ux500: move MCDE pin config to device tree 

This moves the MCDE pin control table out of the board file
and into the device tree. Some pins and configs have been
marked as used by sub-devices or slaves to the MCDE, such
as I2C device 0-070 which is the HDMI interface circuit
AV8100, but the pins rather belong to the MCDE SOC block
as they come out of the main ASIC. The touch screen GPIO
is not related to MCDE so this gets deleted and need to
be tied to the respective touch screen (I2C) device
once that device is added instead.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Linus Walleij 2013-11-14 15:23:20 +01:00
parent 6e9a88a0e5
commit 817a5b967d
4 changed files with 39 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
View File

@ -604,6 +604,33 @@
};
};
};
mcde {
lcd_default_mode: lcd_default {
default_mux {
/* Mux in VSI0 and all the data lines */
ste,function = "lcd";
ste,pins =
"lcdvsi0_a_1", /* VSI0 for LCD */
"lcd_d0_d7_a_1", /* Data lines */
"lcd_d8_d11_a_1", /* TV-out */
"lcdaclk_b_1", /* Clock line for TV-out */
"lcdvsi1_a_1"; /* VSI1 for HDMI */
};
default_cfg1 {
ste,pins =
"GPIO68_E1", /* VSI0 */
"GPIO69_E2"; /* VSI1 */
ste,config = <&in_pu>;
};
};
lcd_sleep_mode: lcd_sleep {
sleep_cfg1 {
ste,pins = "GPIO69_E2"; /* VSI1 */
ste,config = <&slpm_in_wkup_pdis>;
};
};
};
};
};
};

6
arch/arm/boot/dts/ste-href.dtsi
View File

@ -261,5 +261,11 @@
};
};
};
mcde@a0350000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&lcd_default_mode>;
pinctrl-1 = <&lcd_sleep_mode>;
};
};
};

6
arch/arm/boot/dts/ste-snowball.dts
View File

@ -362,5 +362,11 @@
};
};
};
mcde@a0350000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&lcd_default_mode>;
pinctrl-1 = <&lcd_sleep_mode>;
};
};
};

19
arch/arm/mach-ux500/board-mop500-pins.c
View File

@ -46,8 +46,6 @@ BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
/* Sleep modes */
BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|
@ -325,23 +323,6 @@ static struct pinctrl_map __initdata ab8505_pinmap[] = {
/* Pin control settings */
static struct pinctrl_map __initdata mop500_family_pinmap[] = {
/*
* LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to
* pull-up
* TODO: is this really correct? Snowball doesn't have a LCD.
*/
DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"),
DB8500_PIN_HOG("GPIO68_E1", in_pu),
DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu),
/* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
/* Mux in LCD VSI1 and pull it up for MCDE HDMI output */
DB8500_MUX("lcdvsi1_a_1", "lcd", "0-0070"),
DB8500_PIN("GPIO69_E2", in_pu, "0-0070"),
/* LCD VSI1 sleep state */
DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"),
/* ske default state */
DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */