From 7e5d0bf6afcc7bd72f78e7f33570e2e0945624f0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 9 Oct 2019 17:43:43 -0300 Subject: [PATCH] ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts Since commit a211b8c55f3c ("ARM: dts: imx6qdl-sabreauto: Add sensors") a storm of accelerometer interrupts is seen: [ 114.211283] irq 260: nobody cared (try booting with the "irqpoll" option) [ 114.218108] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.4 #1 [ 114.223960] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 114.230531] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 114.238301] [] (show_stack) from [] (dump_stack+0xd8/0x110) [ 114.245644] [] (dump_stack) from [] (__report_bad_irq+0x30/0xc0) [ 114.253417] [] (__report_bad_irq) from [] (note_interrupt+0x108/0x298) [ 114.261707] [] (note_interrupt) from [] (handle_irq_event_percpu+0x70/0x80) [ 114.270433] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x38/0x5c) [ 114.279326] [] (handle_irq_event) from [] (handle_level_irq+0xc8/0x154) [ 114.287701] [] (handle_level_irq) from [] (generic_handle_irq+0x20/0x34) [ 114.296166] [] (generic_handle_irq) from [] (mxc_gpio_irq_handler+0x30/0xf0) [ 114.304975] [] (mxc_gpio_irq_handler) from [] (mx3_gpio_irq_handler+0x60/0xb0) [ 114.313955] [] (mx3_gpio_irq_handler) from [] (generic_handle_irq+0x20/0x34) [ 114.322762] [] (generic_handle_irq) from [] (__handle_domain_irq+0x64/0xe0) [ 114.331485] [] (__handle_domain_irq) from [] (gic_handle_irq+0x4c/0xa8) [ 114.339862] [] (gic_handle_irq) from [] (__irq_svc+0x70/0x98) [ 114.347361] Exception stack(0xc1301ec0 to 0xc1301f08) [ 114.352435] 1ec0: 00000001 00000006 00000000 c130c340 00000001 c130f688 9785636d c13ea2e8 [ 114.360635] 1ee0: 9784907d 0000001a eaf99d78 0000001a 00000000 c1301f10 c0182b00 c0878de4 [ 114.368830] 1f00: 20000013 ffffffff [ 114.372349] [] (__irq_svc) from [] (cpuidle_enter_state+0x168/0x5f4) [ 114.380464] [] (cpuidle_enter_state) from [] (cpuidle_enter+0x28/0x38) [ 114.388751] [] (cpuidle_enter) from [] (do_idle+0x224/0x2a8) [ 114.396168] [] (do_idle) from [] (cpu_startup_entry+0x18/0x20) [ 114.403765] [] (cpu_startup_entry) from [] (start_kernel+0x43c/0x500) [ 114.411958] handlers: [ 114.414302] [] irq_default_primary_handler threaded [] mma8452_interrupt [ 114.422974] Disabling IRQ #260 CPU0 CPU1 .... 260: 100001 0 gpio-mxc 31 Level mma8451 The MMA8451 interrupt triggers as low level, so the GPIO6_IO31 pin needs to activate its pull up, otherwise it will stay always at low level generating multiple interrupts. The current device tree does not configure the IOMUX for this pin, so it uses whathever comes configured from the bootloader. The IOMUXC_SW_PAD_CTL_PAD_EIM_BCLK register value comes as 0x8000 from the bootloader, which has PKE bit cleared, hence disabling the pull-up. Instead of relying on a previous configuration from the bootloader, configure the GPIO6_IO31 pin with pull-up enabled in order to fix this problem. Fixes: a211b8c55f3c ("ARM: dts: imx6qdl-sabreauto: Add sensors") Signed-off-by: Fabio Estevam Reviewed-By: Leonard Crestez Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index f3404dd10537..cf628465cd0a 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -230,6 +230,8 @@ accelerometer@1c { compatible = "fsl,mma8451"; reg = <0x1c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mma8451_int>; interrupt-parent = <&gpio6>; interrupts = <31 IRQ_TYPE_LEVEL_LOW>; }; @@ -628,6 +630,12 @@ >; }; + pinctrl_mma8451_int: mma8451intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb0b1 + >; + }; + pinctrl_pwm3: pwm1grp { fsl,pins = < MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1