More Qualcomm ARM64 DT updates for 6.3

The new Qualcomm QDU1000 and QRU1000 platforms, and the IDP device on
 these are introduced. New support for a couple of USB modem sticks from
 THWC are introduced, so is support for Xiaomi Mi Pad 5 Pro and the Pro
 SKU of the Herobrine device.
 
 The Core Bus Fabric (CBF) is introduced on MSM8996. Interconnect paths
 for UFS are also described.
 
 A few fixes related to the power-grid of herobrine, on SC7280, are
 introduced.
 
 QFPROM is introduced on IPQ8074 and Interconnect providers are added for
 SDM670.
 
 On SDM845 the duplicated wcd9340 audio coded description is moved from
 devices to a common file, audio devices are added to the OnePlus 6 and
 6T.
 
 On SM6115 debug UART, SMP2P, watchdog nodes are introduced, and the
 platform is switched to use #address/size-cells of 2, in line with most
 other platforms.
 
 Camera control interface and clock controllers are added for SM6350, and
 the CCI interface is enabled on the Fairphone FP4.
 
 On SM8350 the interconnect reference of SDHCI controller is corrected,
 DSI1 PHY clocks are properly described as sources for the Display clock
 controller and DSI1 is wired up to the display controller.
 
 The firmware paths are corrected for the Sony Xperia Nagara platform.
 
 The GPR bus, audio servic3es and LPASS pinctrl nodes are added for the
 SM8550 platform. Additionally a few small typos/errors are corrected.
 
 gpio-ranges are corrected across MSM8953, SM6115 and SC8280XP and a
 range of DT validation issues are corrected.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmPmmt0VHGFuZGVyc3Nv
 bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FuXsP/0/VRqYf9SxY5iVEWAuUnsf+sVAT
 fGzZ0YvE3NQoYA0xoExVYZWrDDzkdSp2RoMbLh8kWyku1BCmEeV/X8RnbLoQAM8D
 txUJjpazAVxRiMoDgxxyGpn55KVxb6gAO8fXi9mbc6X+0wsPoWsghZVx5AicEiIY
 3f3m63yFjLGO7aOKs7wfBx5odgUuXoBBzzHYw+VKnp9NAhfMLudM7JCa8kTrOnOZ
 JaPMnvbaQg7i1WEW6jJt4Gbp4+f+IqfYhm1RkzzJbVmf1bYWEEhHltM1p50gwkAK
 fFG6mV+j6WqhJd9myhswvuP9YrBQ0cxZjKErBTNSxzegzgOFfxnG4LsRZRh5oJjq
 qZC+edkPXe6DDIidcGcGvkGekc3c1Xidnwoui7xwIFQ/KN+zZDDg+psnAH3L1On+
 /vWKNetiwXZ5uN3yv8WmTm/5YDLBltjh7RlQVo448RMKSfyt6VEJaJHcJN3G3Nof
 J5F8EJI/EanDU9XjpUEEYGZ2e3yagtc9x6ThVMX+k8tqxhZLxhVDRi7SnY0XKfjQ
 5FVE45sX+J5jlnRu6lx4xF2sgO5jUvTEs1vVY/1IloAfCHipsbhQfU8f4KUN0bNO
 XmTDzsDYK/QXGTYQ27P/xCqu8fRTDbRD8cBF5PWEBbw8uDWtK5bZk1mZFjdkNCge
 E3pIAn6Gs8MANubJ
 =wSbI
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPqTZgACgkQmmx57+YA
 GNlv9g//f6Ya0tDtXwr7GTU3HZc/lEEhibifep5aohWuTsMqoUiic1lLdV2/aXsW
 FZxgQ5TaH7UluqZ1Acrxt9+saYaMu15SBgBXM///pYcY7r5p/sKlRSrNU1sKZv29
 psTGrhotU03TM5XFmavu9su7l34sAO1NAiXTF9h/bSdaX4KYUSQCucBlSFQ7Q2c4
 XlqI9uy79NHIC+O6x4RXdYvmAUb6rQ9rZ4WQOzy+gkFbF19gpz9X+XP5nDMPnfnw
 C31+4SrvMI2/sej+3CZjwg/Vfz5Ahq1WKrOd8jPcdpGiXmfP3iDZlMV9dMbwQbzS
 cF7Jx8S7/p6KaAn8OtnCaD4rar17YJnIjpzlP6gZKj82WCheaK2hwDYT1FcR80bj
 tmjH2hvV8X48njgUga18ZM489xdPkw3rWH/jmH8lnntTqOdR0lsbqlnpsztrO/4H
 W0FVXiKanvwOSYE3Z6I7QrL1ajB+33/nnqPiaevkajtoeGShap5v32FieIjrwa8x
 fYMNjxAegzDUUxQNm7omc+oL7PYTwo26qqJcWiMqa8l6LVx/+o6WPmLIZkzGkEAC
 qqzPU/m55c+E+tEkBf9aW1QMgjBfjdysfnu158mgfVH2ouc2l7p92FqMgWCEz2qo
 XSA0dU2enNus2qJM9oAXPzahPzvM8pHN+EPUFnzVupPqlgawnP8=
 =nzqV
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

More Qualcomm ARM64 DT updates for 6.3

The new Qualcomm QDU1000 and QRU1000 platforms, and the IDP device on
these are introduced. New support for a couple of USB modem sticks from
THWC are introduced, so is support for Xiaomi Mi Pad 5 Pro and the Pro
SKU of the Herobrine device.

The Core Bus Fabric (CBF) is introduced on MSM8996. Interconnect paths
for UFS are also described.

A few fixes related to the power-grid of herobrine, on SC7280, are
introduced.

QFPROM is introduced on IPQ8074 and Interconnect providers are added for
SDM670.

On SDM845 the duplicated wcd9340 audio coded description is moved from
devices to a common file, audio devices are added to the OnePlus 6 and
6T.

On SM6115 debug UART, SMP2P, watchdog nodes are introduced, and the
platform is switched to use #address/size-cells of 2, in line with most
other platforms.

Camera control interface and clock controllers are added for SM6350, and
the CCI interface is enabled on the Fairphone FP4.

On SM8350 the interconnect reference of SDHCI controller is corrected,
DSI1 PHY clocks are properly described as sources for the Display clock
controller and DSI1 is wired up to the display controller.

The firmware paths are corrected for the Sony Xperia Nagara platform.

The GPR bus, audio servic3es and LPASS pinctrl nodes are added for the
SM8550 platform. Additionally a few small typos/errors are corrected.

gpio-ranges are corrected across MSM8953, SM6115 and SC8280XP and a
range of DT validation issues are corrected.

* tag 'qcom-arm64-for-6.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (81 commits)
  arm64: dts: qcom: sc7280: Power herobrine's 3.3 eDP/TS rail more properly
  arm64: dts: qcom: pmk8550: fix PON compatible
  arm64: dts: qcom: sm8550: fix DSI controller compatible
  arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on evoker
  arm64: dts: qcom: sc7280: Hook up the touchscreen IO rail on villager
  arm64: dts: qcom: sc7280: Add 3ms ramp to herobrine's pp3300_left_in_mlb
  arm64: dts: qcom: sc7280: On QCard, regulator L3C should be 1.8V
  arm64: dts: qcom: sc8280xp: correct LPASS GPIO gpio-ranges
  arm64: dts: qcom: msm8992-lg-bullhead: Enable regulators
  arm64: dts: qcom: sm6115: correct TLMM gpio-ranges
  arm64: dts: qcom: msm8953: correct TLMM gpio-ranges
  arm64: dts: qcom: msm8992-lg-bullhead: Correct memory overlaps with the SMEM and MPSS memory regions
  arm64: dts: qcom: sm8350-hdk: correct LT9611 pin function
  arm64: dts: qcom: sm8350-hdk: align pin config node names with bindings
  arm64: dts: qcom: sm6350: Use specific qmpphy compatible
  arm64: dts: qcom: sm6115: Add smp2p nodes
  arm64: dts: qcom: sm7225-fairphone-fp4: Enable CCI busses
  arm64: dts: qcom: sm6350: Add CCI nodes
  arm64: dts: qcom: sm6350: Add camera clock controller
  dt-bindings: clock: add QCOM SM6350 camera clock bindings
  ...

Link: https://lore.kernel.org/r/20230210192908.2039976-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/devicetree/bindings/clock/qcom,qdu1000-gcc.yaml

@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,qdu1000-gcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller for QDU1000 and QRU1000
+
+maintainers:
+  - Melody Olvera <quic_molvera@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on QDU1000 and QRU1000
+
+  See also:: include/dt-bindings/clock/qcom,qdu1000-gcc.h
+
+properties:
+  compatible:
+    const: qcom,qdu1000-gcc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: Sleep clock source
+      - description: PCIE 0 Pipe clock source
+      - description: PCIE 0 Phy Auxiliary clock source
+      - description: USB3 Phy wrapper pipe clock source
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,qdu1000-gcc";
+      reg = <0x00100000 0x001f4200>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>,
+               <&pcie_0_pipe_clk>, <&pcie_0_phy_aux_clk>,
+               <&usb3_phy_wrapper_pipe_clk>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };

Documentation/devicetree/bindings/clock/qcom,sm6350-camcc.yaml

@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sm6350-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller on SM6350
+
+maintainers:
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  Qualcomm camera clock control module provides the clocks, resets and  power
+  domains on SM6350.
+
+  See also:: include/dt-bindings/clock/qcom,sm6350-camcc.h
+
+properties:
+  compatible:
+    const: qcom,sm6350-camcc
+
+  clocks:
+    items:
+      - description: Board XO source
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - clocks
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@ad00000 {
+      compatible = "qcom,sm6350-camcc";
+      reg = <0x0ad00000 0x16000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...

Documentation/devicetree/bindings/interconnect/qcom,qdu1000-rpmh.yaml

@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,qdu1000-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on QDU1000
+
+maintainers:
+  - Georgi Djakov <djakov@kernel.org>
+  - Odelu Kukatla <quic_okukatla@quicinc.com>
+
+description: |
+   RPMh interconnect providers support system bandwidth requirements through
+   RPMh hardware accelerators known as Bus Clock Manager (BCM). The provider is
+   able to communicate with the BCM through the Resource State Coordinator (RSC)
+   associated with each execution environment. Provider nodes must point to at
+   least one RPMh device child node pertaining to their RSC and each provider
+   can map to multiple RPMh resources.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qdu1000-clk-virt
+      - qcom,qdu1000-gem-noc
+      - qcom,qdu1000-mc-virt
+      - qcom,qdu1000-system-noc
+
+  '#interconnect-cells': true
+
+  reg:
+    maxItems: 1
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qdu1000-clk-virt
+              - qcom,qdu1000-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
+
+    system_noc: interconnect@1640000 {
+        compatible = "qcom,qdu1000-system-noc";
+        reg = <0x1640000 0x45080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    clk_virt: interconnect-0 {
+        compatible = "qcom,qdu1000-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };

arch/arm64/boot/dts/qcom/Makefile

@@ -25,6 +25,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-gt58.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5x.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-uf896.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-thwc-ufi001c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
@@ -66,8 +68,10 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5-vision-mezzanine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qru1000-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-ride.dtb
@@ -123,6 +127,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-crd-pro.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-evoker.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-evoker-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-herobrine-r1.dtb
@@ -184,6 +189,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx203.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx206.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-microsoft-surface-duo2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-mtp.dtb

arch/arm64/boot/dts/qcom/ipq8074.dtsi

@@ -266,6 +266,13 @@
 			status = "disabled";
 		};
 
+		qfprom: efuse@a4000 {
+			compatible = "qcom,ipq8074-qfprom", "qcom,qfprom";
+			reg = <0x000a4000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		prng: rng@e3000 {
 			compatible = "qcom,prng-ee";
 			reg = <0x000e3000 0x1000>;

arch/arm64/boot/dts/qcom/msm8916-thwc-uf896.dts

@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-ufi.dtsi"
+
+/ {
+	model = "uf896 4G Modem Stick";
+	compatible = "thwc,uf896", "qcom,msm8916";
+};
+
+&button_restart {
+	gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+};
+
+&led_r {
+	gpios = <&msmgpio 82 GPIO_ACTIVE_HIGH>;
+};
+
+&led_g {
+	gpios = <&msmgpio 83 GPIO_ACTIVE_HIGH>;
+};
+
+&led_b {
+	gpios = <&msmgpio 81 GPIO_ACTIVE_HIGH>;
+};
+
+&button_default {
+	pins = "gpio35";
+	bias-pull-up;
+};
+
+&gpio_leds_default {
+	pins = "gpio81", "gpio82", "gpio83";
+};
+
+&sim_ctrl_default {
+	pins = "gpio1", "gpio2";
+};

arch/arm64/boot/dts/qcom/msm8916-thwc-ufi001c.dts

@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-ufi.dtsi"
+
+/ {
+	model = "ufi-001c/ufi-001b 4G Modem Stick";
+	compatible = "thwc,ufi001c", "qcom,msm8916";
+};
+
+&button_restart {
+	gpios = <&msmgpio 37 GPIO_ACTIVE_HIGH>;
+};
+
+&led_r {
+	gpios = <&msmgpio 22 GPIO_ACTIVE_HIGH>;
+};
+
+&led_g {
+	gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
+};
+
+&led_b {
+	gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
+};
+
+&button_default {
+	pins = "gpio37";
+	bias-pull-down;
+};
+
+&gpio_leds_default {
+	pins = "gpio20", "gpio21", "gpio22";
+};
+
+&sim_ctrl_default {
+	pins = "gpio1", "gpio2";
+};

arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi

@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "msm8916-pm8916.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &blsp1_uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	reserved-memory {
+		mpss_mem: mpss@86800000 {
+			reg = <0x0 0x86800000 0x0 0x5500000>;
+			no-map;
+		};
+
+		gps_mem: gps@8bd00000 {
+			reg = <0x0 0x8bd00000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&button_default>;
+		pinctrl-names = "default";
+
+		label = "GPIO Buttons";
+
+		/* GPIO is board-specific */
+		button_restart: button-restart {
+			label = "Restart";
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&gpio_leds_default>;
+		pinctrl-names = "default";
+
+		/*
+		 * GPIOs are board-specific.
+		 * Functions and default-states defined here are fallbacks.
+		 * Feel free to override them if your board is different.
+		 */
+		led_r: led-r {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+		};
+
+		led_g: led-g {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_WLAN;
+		};
+
+		led_b: led-b {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_WAN;
+		};
+	};
+};
+
+&bam_dmux {
+	status = "okay";
+};
+
+&bam_dmux_dma {
+	status = "okay";
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+/* Remove &dsi_phy0 from clocks to make sure that gcc probes with display disabled */
+&gcc {
+	clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>;
+};
+
+&mpss {
+	pinctrl-0 = <&sim_ctrl_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pm8916_usbin {
+	status = "okay";
+};
+
+&pronto {
+	status = "okay";
+};
+
+&sdhc_1 {
+	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
+	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&usb {
+	extcon = <&pm8916_usbin>;
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_hs_phy {
+	extcon = <&pm8916_usbin>;
+};
+
+&smd_rpm_regulators {
+	vdd_l1_l2_l3-supply = <&pm8916_s3>;
+	vdd_l4_l5_l6-supply = <&pm8916_s4>;
+	vdd_l7-supply = <&pm8916_s4>;
+
+	s3 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1300000>;
+	};
+
+	s4 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2100000>;
+	};
+
+	l1 {
+		regulator-min-microvolt = <1225000>;
+		regulator-max-microvolt = <1225000>;
+	};
+
+	l2 {
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	l4 {
+		regulator-min-microvolt = <2050000>;
+		regulator-max-microvolt = <2050000>;
+	};
+
+	l5 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l6 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l7 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	l8 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2900000>;
+	};
+
+	l9 {
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l10 {
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	l11 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+		regulator-system-load = <200000>;
+		regulator-allow-set-load;
+	};
+
+	l12 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+	};
+
+	l13 {
+		regulator-min-microvolt = <3075000>;
+		regulator-max-microvolt = <3075000>;
+	};
+
+	l14 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l15 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l16 {
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	l17 {
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+	};
+
+	l18 {
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+	};
+};
+
+&msmgpio {
+	/* pins are board-specific */
+	button_default: button-default-state {
+		function = "gpio";
+		drive-strength = <2>;
+	};
+
+	gpio_leds_default: gpio-leds-default-state {
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sim_ctrl_default: sim-ctrl-default-state {
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+};

arch/arm64/boot/dts/qcom/msm8953.dtsi

@@ -399,7 +399,7 @@
 			reg = <0x1000000 0x300000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 155>;
+			gpio-ranges = <&tlmm 0 0 142>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;

arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi

@@ -56,8 +56,13 @@
 			no-map;
 		};
 
-		removed_region: reserved@5000000 {
+		reserved@5000000 {
-			reg = <0 0x05000000 0 0x2200000>;
+			reg = <0x0 0x05000000 0x0 0x1a00000>;
+			no-map;
+		};
+
+		reserved@6c00000 {
+			reg = <0x0 0x06c00000 0x0 0x400000>;
 			no-map;
 		};
 	};
@@ -89,8 +94,8 @@
 		/* S1, S2, S6 and S12 are managed by RPMPD */
 
 		pm8994_s1: s1 {
-			regulator-min-microvolt = <800000>;
+			regulator-min-microvolt = <1025000>;
-			regulator-max-microvolt = <800000>;
+			regulator-max-microvolt = <1025000>;
 		};
 
 		pm8994_s2: s2 {
@@ -246,11 +251,8 @@
 		};
 
 		pm8994_l26: l26 {
-			/*
+			regulator-min-microvolt = <987500>;
-			 * TODO: value from downstream
+			regulator-max-microvolt = <987500>;
-			 * regulator-min-microvolt = <987500>;
-			 * fails to apply
-			 */
 		};
 
 		pm8994_l27: l27 {
@@ -264,19 +266,13 @@
 		};
 
 		pm8994_l29: l29 {
-			/*
+			regulator-min-microvolt = <2800000>;
-			 * TODO: Unsupported voltage range.
+			regulator-max-microvolt = <2800000>;
-			 * regulator-min-microvolt = <2800000>;
-			 * regulator-max-microvolt = <2800000>;
-			 */
 		};
 
 		pm8994_l30: l30 {
-			/*
+			regulator-min-microvolt = <1800000>;
-			 * TODO: get this verified
+			regulator-max-microvolt = <1800000>;
-			 * regulator-min-microvolt = <1800000>;
-			 * regulator-max-microvolt = <1800000>;
-			 */
 		};
 
 		pm8994_l31: l31 {
@@ -285,11 +281,8 @@
 		};
 
 		pm8994_l32: l32 {
-			/*
+			regulator-min-microvolt = <1800000>;
-			 * TODO: get this verified
+			regulator-max-microvolt = <1800000>;
-			 * regulator-min-microvolt = <1800000>;
-			 * regulator-max-microvolt = <1800000>;
-			 */
 		};
 	};
 

arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi

@@ -229,7 +229,7 @@
 	status = "okay";
 	label = "QCA_UART";
 
-	bluetooth: qca6174a {
+	bluetooth: bluetooth {
 		compatible = "qcom,qca6174-bt";
 
 		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;

arch/arm64/boot/dts/qcom/msm8996.dtsi

@@ -719,7 +719,7 @@
 			#power-domain-cells = <1>;
 			reg = <0x00300000 0x90000>;
 
-			clocks = <&rpmcc RPM_SMD_BB_CLK1>,
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&rpmcc RPM_SMD_LN_BB_CLK>,
 				 <&sleep_clk>,
 				 <&pciephy_0>,
@@ -1061,7 +1061,7 @@
 				#clock-cells = <1>;
 				#phy-cells = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
+				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
 				clock-names = "iface", "ref";
 				status = "disabled";
 			};
@@ -1129,7 +1129,7 @@
 				#clock-cells = <1>;
 				#phy-cells = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
+				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
 				clock-names = "iface", "ref";
 				status = "disabled";
 			};
@@ -2037,6 +2037,10 @@
 				<0 0>,
 				<0 0>;
 
+			interconnects = <&a2noc MASTER_UFS &bimc SLAVE_EBI_CH0>,
+					<&bimc MASTER_AMPSS_M0 &cnoc SLAVE_UFS_CFG>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
+
 			lanes-per-direction = <1>;
 			#reset-cells = <1>;
 			status = "disabled";
@@ -2958,7 +2962,7 @@
 			reg = <0x06400000 0x90000>;
 
 			clock-names = "xo", "sys_apcs_aux";
-			clocks = <&rpmcc RPM_SMD_BB_CLK1>, <&apcs_glb>;
+			clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
 
 			#clock-cells = <1>;
 		};
@@ -3077,7 +3081,7 @@
 			clock-names = "iface", "core", "xo";
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				<&gcc GCC_SDCC1_APPS_CLK>,
-				<&rpmcc RPM_SMD_BB_CLK1>;
+				<&rpmcc RPM_SMD_XO_CLK_SRC>;
 			resets = <&gcc GCC_SDCC1_BCR>;
 
 			pinctrl-names = "default", "sleep";
@@ -3101,7 +3105,7 @@
 			clock-names = "iface", "core", "xo";
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				<&gcc GCC_SDCC2_APPS_CLK>,
-				<&rpmcc RPM_SMD_BB_CLK1>;
+				<&rpmcc RPM_SMD_XO_CLK_SRC>;
 			resets = <&gcc GCC_SDCC2_BCR>;
 
 			pinctrl-names = "default", "sleep";
@@ -3423,7 +3427,7 @@
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
 
-			clocks = <&rpmcc RPM_SMD_BB_CLK1>;
+			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "xo";
 
 			memory-region = <&adsp_mem>;
@@ -3568,6 +3572,13 @@
 			reg = <0x09a10000 0x1000>;
 		};
 
+		cbf: clock-controller@9a11000 {
+			compatible = "qcom,msm8996-cbf";
+			reg = <0x09a11000 0x10000>;
+			clocks = <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&apcs_glb>;
+			#clock-cells = <0>;
+		};
+
 		intc: interrupt-controller@9bc0000 {
 			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
 			#interrupt-cells = <3>;

arch/arm64/boot/dts/qcom/pmk8550.dtsi

@@ -16,7 +16,7 @@
 		#size-cells = <0>;
 
 		pmk8550_pon: pon@1300 {
-			compatible = "qcom,pm8998-pon";
+			compatible = "qcom,pmk8350-pon";
 			reg = <0x1300>, <0x800>;
 			reg-names = "hlos", "pbs";
 

arch/arm64/boot/dts/qcom/qdu1000-idp.dts

@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qdu1000.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QDU1000 IDP";
+	compatible = "qcom,qdu1000-idp", "qcom,qdu1000";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		xo_board: xo-board-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+};
+
+&apps_rsc {
+	regulators {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vph_pwr>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
+		vdd-l6-l9-supply = <&vreg_s6a_0p9>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
+		vdd-l13-l16-l17-supply = <&vph_pwr>;
+
+		vreg_s2a_0p5: smps2 {
+			regulator-name = "vreg_s2a_0p5";
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <570000>;
+		};
+
+		vreg_s3a_1p05: smps3 {
+			regulator-name = "vreg_s3a_1p05";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-name = "vreg_s5a_2p0";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-name = "vreg_s6a_0p9";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s7a_1p2: smps7 {
+			regulator-name = "vreg_s7a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_s8a_1p3: smps8 {
+			regulator-name = "vreg_s8a_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1a_0p91: ldo1 {
+			regulator-name = "vreg_l1a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2a_2p3: ldo2 {
+			regulator-name = "vreg_l2a_2p3";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3a_1p2: ldo3 {
+			regulator-name = "vreg_l3a_1p2";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-name = "vreg_l5a_0p8";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6a_0p91: ldo6 {
+			regulator-name = "vreg_l6a_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+
+		};
+
+		vreg_l8a_0p91: ldo8 {
+			regulator-name = "vreg_l8a_0p91";
+			regulator-min-microvolt = <888000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9a_0p91: ldo9 {
+			regulator-name = "vreg_l9a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10a_2p95: ldo10 {
+			regulator-name = "vreg_l10a_2p95";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11a_0p91: ldo11 {
+			regulator-name = "vreg_l11a_0p91";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l16a_1p8: ldo16 {
+			regulator-name = "vreg_l16a_1p8";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l17a_3p3: ldo17 {
+			regulator-name = "vreg_l17a_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l18a_1p2: ldo18 {
+			regulator-name = "vreg_l18a_1p2";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+};
+
+&qup_i2c1_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c2_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c3_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c4_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c5_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c6_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c9_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c10_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c11_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c12_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c13_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c14_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c15_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_spi1_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi1_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi2_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi2_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi3_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi3_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi4_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi4_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi5_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi5_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi6_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi6_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi9_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi9_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi10_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi10_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi11_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi11_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi12_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi12_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi14_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi14_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi15_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi15_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_uart7_rx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+};

arch/arm64/boot/dts/qcom/qrb5165-rb5.dts

@@ -238,7 +238,7 @@
 };
 
 &apps_rsc {
-	pm8009-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8009-1-rpmh-regulators";
 		qcom,pmic-id = "f";
 
@@ -284,7 +284,7 @@
 		};
 	};
 
-	pm8150-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8150-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -417,7 +417,7 @@
 		};
 	};
 
-	pm8150l-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8150l-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -1007,6 +1007,8 @@
 };
 
 &swr0 {
+	status = "okay";
+
 	left_spkr: speaker@0,3 {
 		compatible = "sdw10217211000";
 		reg = <0 3>;
@@ -1322,6 +1324,10 @@
 	status = "okay";
 };
 
+&wsamacro {
+	status = "okay";
+};
+
 /* PINCTRL - additions to nodes defined in sm8250.dtsi */
 &qup_spi0_cs_gpio {
 	drive-strength = <6>;

arch/arm64/boot/dts/qcom/qru1000-idp.dts

@@ -0,0 +1,453 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qru1000.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QRU1000 IDP";
+	compatible = "qcom,qru1000-idp", "qcom,qru1000";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		xo_board: xo-board-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <19200000>;
+			#clock-cells = <0>;
+		};
+
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <32000>;
+			#clock-cells = <0>;
+		};
+	};
+
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+};
+
+&apps_rsc {
+	regulators {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+		vdd-l2-l10-supply = <&vph_pwr>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
+		vdd-l6-l9-supply = <&vreg_s6a_0p9>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
+		vdd-l13-l16-l17-supply = <&vph_pwr>;
+
+		vreg_s2a_0p5: smps2 {
+			regulator-name = "vreg_s2a_0p5";
+			regulator-min-microvolt = <320000>;
+			regulator-max-microvolt = <570000>;
+		};
+
+		vreg_s3a_1p05: smps3 {
+			regulator-name = "vreg_s3a_1p05";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s5a_2p0: smps5 {
+			regulator-name = "vreg_s5a_2p0";
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2000000>;
+		};
+
+		vreg_s6a_0p9: smps6 {
+			regulator-name = "vreg_s6a_0p9";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1128000>;
+		};
+
+		vreg_s7a_1p2: smps7 {
+			regulator-name = "vreg_s7a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_s8a_1p3: smps8 {
+			regulator-name = "vreg_s8a_1p3";
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_l1a_0p91: ldo1 {
+			regulator-name = "vreg_l1a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l2a_2p3: ldo2 {
+			regulator-name = "vreg_l2a_2p3";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l3a_1p2: ldo3 {
+			regulator-name = "vreg_l3a_1p2";
+			regulator-min-microvolt = <920000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l5a_0p8: ldo5 {
+			regulator-name = "vreg_l5a_0p8";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l6a_0p91: ldo6 {
+			regulator-name = "vreg_l6a_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-name = "vreg_l7a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+
+		};
+
+		vreg_l8a_0p91: ldo8 {
+			regulator-name = "vreg_l8a_0p91";
+			regulator-min-microvolt = <888000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l9a_0p91: ldo9 {
+			regulator-name = "vreg_l9a_0p91";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l10a_2p95: ldo10 {
+			regulator-name = "vreg_l10a_2p95";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l11a_0p91: ldo11 {
+			regulator-name = "vreg_l11a_0p91";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <1504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l14a_1p8: ldo14 {
+			regulator-name = "vreg_l14a_1p8";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-name = "vreg_l15a_1p8";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l16a_1p8: ldo16 {
+			regulator-name = "vreg_l16a_1p8";
+			regulator-min-microvolt = <1710000>;
+			regulator-max-microvolt = <1890000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l17a_3p3: ldo17 {
+			regulator-name = "vreg_l17a_3p3";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+
+		vreg_l18a_1p2: ldo18 {
+			regulator-name = "vreg_l18a_1p2";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
+		};
+	};
+};
+
+&qup_i2c1_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c2_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c3_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c4_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c5_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c6_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c9_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c10_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c11_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c12_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c13_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c14_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_i2c15_data_clk {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_spi1_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi1_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi2_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi2_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi3_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi3_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi4_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi4_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi5_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi5_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi6_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi6_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi9_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi9_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi10_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi10_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi11_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi11_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi12_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi12_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi13_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi14_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi14_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi15_cs {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_spi15_data_clk {
+	drive-strength = <6>;
+	bias-disable;
+};
+
+&qup_uart7_rx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+};

arch/arm64/boot/dts/qcom/qru1000.dtsi

@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "qdu1000.dtsi"
+/delete-node/ &tenx_mem;
+/delete-node/ &oem_tenx_mem;
+/delete-node/ &tenx_q6_buffer_mem;
+
+&reserved_memory {
+	oem_tenx_mem: oem-tenx@a0000000 {
+		reg = <0x0 0xa0000000 0x0 0x6400000>;
+		no-map;
+	};
+
+	mpss_diag_buffer_mem: mpss-diag-buffer@aea00000 {
+		reg = <0x0 0xaea00000 0x0 0x6400000>;
+		no-map;
+	};
+
+	tenx_q6_buffer_mem: tenx-q6-buffer@b4e00000 {
+		reg = <0x0 0xb4e00000 0x0 0x3200000>;
+		no-map;
+	};
+};

arch/arm64/boot/dts/qcom/sa8155p-adp.dts

@@ -72,7 +72,7 @@
 };
 
 &apps_rsc {
-	pmm8155au-1-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pmm8155au-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -201,7 +201,7 @@
 		};
 	};
 
-	pmm8155au-2-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pmm8155au-rpmh-regulators";
 		qcom,pmic-id = "c";
 

arch/arm64/boot/dts/qcom/sa8295p-adp.dts

@@ -111,7 +111,7 @@
 };
 
 &apps_rsc {
-	pmm8540-a-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8150-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -151,7 +151,7 @@
 		};
 	};
 
-	pmm8540-c-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8150-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -224,7 +224,7 @@
 		};
 	};
 
-	pmm8540-g-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8150-rpmh-regulators";
 		qcom,pmic-id = "g";
 

arch/arm64/boot/dts/qcom/sa8540p-ride.dts

@@ -317,27 +317,31 @@
 
 &tlmm {
 	i2c0_default: i2c0-default-state {
+		/* To USB7002T-I/KDXVA0 USB hub (SIP1 only) */
 		pins = "gpio135", "gpio136";
-		function = "qup15";
+		function = "qup0";
 		drive-strength = <2>;
 		bias-pull-up;
 	};
 
 	i2c1_default: i2c1-default-state {
+		/* To PM40028B-F3EI PCIe switch */
 		pins = "gpio158", "gpio159";
-		function = "qup15";
+		function = "qup1";
 		drive-strength = <2>;
 		bias-pull-up;
 	};
 
 	i2c12_default: i2c12-default-state {
+		/* To Maxim max20411 */
 		pins = "gpio0", "gpio1";
-		function = "qup15";
+		function = "qup12";
 		drive-strength = <2>;
 		bias-pull-up;
 	};
 
 	i2c15_default: i2c15-default-state {
+		/* To display connector (SIP1 only) */
 		pins = "gpio36", "gpio37";
 		function = "qup15";
 		drive-strength = <2>;
@@ -345,6 +349,7 @@
 	};
 
 	i2c18_default: i2c18-default-state {
+		/* To ASM330LHH IMU (SIP1 only) */
 		pins = "gpio66", "gpio67";
 		function = "qup18";
 		drive-strength = <2>;

arch/arm64/boot/dts/qcom/sc7180-idp.dts

@@ -90,7 +90,7 @@
 };
 
 &apps_rsc {
-	pm6150-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm6150-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -212,7 +212,7 @@
 		};
 	};
 
-	pm6150l-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm6150l-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -430,7 +430,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-1 = <&qup_uart3_sleep>;
 
-	bluetooth: wcn3990-bt {
+	bluetooth: bluetooth {
 		compatible = "qcom,wcn3990-bt";
 		vddio-supply = <&vreg_l10a_1p8>;
 		vddxo-supply = <&vreg_l1c_1p8>;

arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi

@@ -438,7 +438,7 @@
 };
 
 &apps_rsc {
-	pm6150-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm6150-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -551,7 +551,7 @@
 		};
 	};
 
-	pm6150l-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm6150l-rpmh-regulators";
 		qcom,pmic-id = "c";
 

arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-wcd9385.dtsi

@@ -32,12 +32,8 @@
 			"TX SWR_DMIC6", "DMIC7_OUTPUT",
 			"TX SWR_DMIC7", "DMIC8_OUTPUT";
 
-		qcom,msm-mbhc-hphl-swh = <1>;
-		qcom,msm-mbhc-gnd-swh = <1>;
-
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#sound-dai-cells = <0>;
 
 		dai-link@0 {
 			link-name = "MAX98360A";

arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts

@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 CRD 3+ Pro board device tree source
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "sc7280-herobrine-crd.dts"
+#include "sc7280-herobrine-pro-sku.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. sc7280 CRD Pro platform (rev5+)";
+	compatible = "google,zoglin-sku1536", "google,hoglin-sku1536", "qcom,sc7280";
+};

arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi

@@ -55,6 +55,7 @@ ts_i2c: &i2c13 {
 		reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 		vdd-supply = <&ts_avdd>;
+		mainboard-vddio-supply = <&ts_avccio>;
 	};
 };
 

arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi

@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Google Herobrine dts fragment for PRO SKUs
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/delete-node/ &vreg_s9c_0p676;

arch/arm64/boot/dts/qcom/sc7280-herobrine-villager.dtsi

@@ -55,6 +55,7 @@ ts_i2c: &i2c13 {
 		reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
 		vcc33-supply = <&ts_avdd>;
+		vccio-supply = <&ts_avccio>;
 	};
 };
 

arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi

@@ -108,6 +108,24 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&en_pp3300_dx_edp>;
 
+		regulator-enable-ramp-delay = <3000>;
+
+		/*
+		 * eDP panel specs nearly always have a spec that says you
+		 * shouldn't turn them off an on again without waiting 500ms.
+		 * Add this as a board constraint since this rail is shared
+		 * between the panel and touchscreen.
+		 */
+		off-on-delay-us = <500000>;
+
+		/*
+		 * Stat the regulator on. This has the advantage of starting
+		 * the slow process of powering the panel on as soon as we
+		 * probe the regulator. It also avoids tripping the
+		 * off-on-delay immediately on every bootup.
+		 */
+		regulator-boot-on;
+
 		vin-supply = <&pp3300_z1>;
 	};
 

arch/arm64/boot/dts/qcom/sc7280-idp.dtsi

@@ -113,12 +113,8 @@
 			"TX SWR_DMIC6", "DMIC7_OUTPUT",
 			"TX SWR_DMIC7", "DMIC8_OUTPUT";
 
-		qcom,msm-mbhc-hphl-swh = <1>;
-		qcom,msm-mbhc-gnd-swh = <1>;
-
 		#address-cells = <1>;
 		#size-cells = <0>;
-		#sound-dai-cells = <0>;
 
 		dai-link@0 {
 			link-name = "MAX98360A";

arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi

@@ -230,9 +230,15 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		/*
+		 * The initial design of this regulator was to use it as 3.3V,
+		 * but due to later changes in design it was changed to 1.8V.
+		 * The original name is kept due to same schematic.
+		 */
+		ts_avccio:
 		vreg_l3c_3p0: ldo3 {
-			regulator-min-microvolt = <2800000>;
+			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3540000>;
+			regulator-max-microvolt = <1800000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 

arch/arm64/boot/dts/qcom/sc8280xp-crd.dts

@@ -142,7 +142,7 @@
 };
 
 &apps_rsc {
-	pmc8280-1-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8350-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -179,7 +179,7 @@
 		};
 	};
 
-	pmc8280c-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8350c-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -208,7 +208,7 @@
 		};
 	};
 
-	pmc8280-2-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8350-rpmh-regulators";
 		qcom,pmic-id = "d";
 
@@ -264,6 +264,7 @@
 
 &mdss0_dp3 {
 	compatible = "qcom,sc8280xp-edp";
+	/delete-property/ #sound-dai-cells;
 
 	data-lanes = <0 1 2 3>;
 

arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts

@@ -241,7 +241,7 @@
 };
 
 &apps_rsc {
-	pmc8280-1-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8350-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -292,7 +292,7 @@
 		};
 	};
 
-	pmc8280c-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8350c-rpmh-regulators";
 		qcom,pmic-id = "c";
 		vdd-bob-supply = <&vreg_vph_pwr>;
@@ -326,7 +326,7 @@
 		};
 	};
 
-	pmc8280-2-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8350-rpmh-regulators";
 		qcom,pmic-id = "d";
 

arch/arm64/boot/dts/qcom/sc8280xp.dtsi

@@ -2646,7 +2646,7 @@
 			      <0 0x3550000 0x0 0x10000>;
 			gpio-controller;
 			#gpio-cells = <2>;
-			gpio-ranges = <&lpass_tlmm 0 0 18>;
+			gpio-ranges = <&lpass_tlmm 0 0 19>;
 
 			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
@@ -3204,7 +3204,8 @@
 				reg = <0 0xae9a000 0 0x200>,
 				      <0 0xae9a200 0 0x200>,
 				      <0 0xae9a400 0 0x600>,
-				      <0 0xae9b000 0 0x400>;
+				      <0 0xae9b000 0 0x400>,
+				      <0 0xae9b400 0 0x400>;
 
 				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
@@ -3275,7 +3276,8 @@
 				reg = <0 0xaea0000 0 0x200>,
 				      <0 0xaea0200 0 0x200>,
 				      <0 0xaea0400 0 0x600>,
-				      <0 0xaea1000 0 0x400>;
+				      <0 0xaea1000 0 0x400>,
+				      <0 0xaea1400 0 0x400>;
 
 				clocks = <&dispcc0 DISP_CC_MDSS_AHB_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX3_AUX_CLK>,
@@ -4150,7 +4152,8 @@
 				reg = <0 0x22090000 0 0x200>,
 				      <0 0x22090200 0 0x200>,
 				      <0 0x22090400 0 0x600>,
-				      <0 0x22091000 0 0x400>;
+				      <0 0x22091000 0 0x400>,
+				      <0 0x22091400 0 0x400>;
 
 				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
@@ -4222,7 +4225,8 @@
 				reg = <0 0x22098000 0 0x200>,
 				      <0 0x22098200 0 0x200>,
 				      <0 0x22098400 0 0x600>,
-				      <0 0x22099000 0 0x400>;
+				      <0 0x22099000 0 0x400>,
+				      <0 0x22099400 0 0x400>;
 
 				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
@@ -4293,7 +4297,8 @@
 				reg = <0 0x2209a000 0 0x200>,
 				      <0 0x2209a200 0 0x200>,
 				      <0 0x2209a400 0 0x600>,
-				      <0 0x2209b000 0 0x400>;
+				      <0 0x2209b000 0 0x400>,
+				      <0 0x2209b400 0 0x400>;
 
 				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
@@ -4364,7 +4369,8 @@
 				reg = <0 0x220a0000 0 0x200>,
 				      <0 0x220a0200 0 0x200>,
 				      <0 0x220a0400 0 0x600>,
-				      <0 0x220a1000 0 0x400>;
+				      <0 0x220a1000 0 0x400>,
+				      <0 0x220a1400 0 0x400>;
 
 				clocks = <&dispcc1 DISP_CC_MDSS_AHB_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX3_AUX_CLK>,

arch/arm64/boot/dts/qcom/sdm670.dtsi

@@ -788,6 +788,55 @@
 			};
 		};
 
+		mem_noc: interconnect@1380000 {
+			compatible = "qcom,sdm670-mem-noc";
+			reg = <0 0x01380000 0 0x27200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		dc_noc: interconnect@14e0000 {
+			compatible = "qcom,sdm670-dc-noc";
+			reg = <0 0x014e0000 0 0x400>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sdm670-config-noc";
+			reg = <0 0x01500000 0 0x5080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sdm670-system-noc";
+			reg = <0 0x01620000 0 0x18080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sdm670-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sdm670-aggre2-noc";
+			reg = <0 0x01700000 0 0x1f300>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sdm670-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		tlmm: pinctrl@3400000 {
 			compatible = "qcom,sdm670-tlmm";
 			reg = <0 0x03400000 0 0xc00000>;
@@ -1083,6 +1132,13 @@
 				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		gladiator_noc: interconnect@17900000 {
+			compatible = "qcom,sdm670-gladiator-noc";
+			reg = <0 0x17900000 0 0xd080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		apps_rsc: rsc@179c0000 {
 			compatible = "qcom,rpmh-rsc";
 			reg = <0 0x179c0000 0 0x10000>,

arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi

@@ -339,7 +339,7 @@
 
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -621,7 +621,7 @@
 		};
 	};
 
-	pm8005-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8005-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -862,7 +862,7 @@ ap_ts_i2c: &i2c14 {
 
 	pinctrl-0 = <&qup_uart6_4pin>;
 
-	bluetooth: wcn3990-bt {
+	bluetooth: bluetooth {
 		compatible = "qcom,wcn3990-bt";
 		vddio-supply = <&src_pp1800_s4a>;
 		vddxo-supply = <&pp1800_l7a_wcn3990>;

arch/arm64/boot/dts/qcom/sdm845-db845c.dts

@@ -11,6 +11,7 @@
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
 #include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
 #include "pm8998.dtsi"
 #include "pmi8998.dtsi"
 
@@ -269,7 +270,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 		vdd-s1-supply = <&vph_pwr>;
@@ -394,7 +395,7 @@
 		};
 	};
 
-	pmi8998-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pmi8998-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -702,7 +703,7 @@
 };
 
 &sound {
-	compatible = "qcom,db845c-sndcard";
+	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
 	pinctrl-0 = <&quat_mi2s_active
 			 &quat_mi2s_sd0_active
 			 &quat_mi2s_sd1_active
@@ -970,15 +971,6 @@
 		function = "gpio";
 		bias-pull-up;
 	};
-
-	wcd_intr_default: wcd-intr-default-state {
-		pins = "gpio54";
-		function = "gpio";
-
-		input-enable;
-		bias-pull-down;
-		drive-strength = <2>;
-	};
 };
 
 &uart3 {
@@ -1084,10 +1076,6 @@
 };
 
 &wcd9340 {
-	pinctrl-0 = <&wcd_intr_default>;
-	pinctrl-names = "default";
-	clock-names = "extclk";
-	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 	vdd-buck-supply = <&vreg_s4a_1p8>;
 	vdd-buck-sido-supply = <&vreg_s4a_1p8>;

arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi

@@ -166,7 +166,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -419,7 +419,7 @@
 		};
 	};
 
-	pmi8998-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pmi8998-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -433,7 +433,7 @@
 		};
 	};
 
-	pm8005-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8005-rpmh-regulators";
 		qcom,pmic-id = "c";
 

arch/arm64/boot/dts/qcom/sdm845-mtp.dts

@@ -117,7 +117,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -382,7 +382,7 @@
 		};
 	};
 
-	pmi8998-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pmi8998-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -396,7 +396,7 @@
 		};
 	};
 
-	pm8005-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8005-rpmh-regulators";
 		qcom,pmic-id = "c";
 

arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi

@@ -9,8 +9,11 @@
 
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 
 #include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
 #include "pm8998.dtsi"
 #include "pmi8998.dtsi"
 
@@ -145,7 +148,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -281,7 +284,7 @@
 		};
 	};
 
-	pmi8998-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pmi8998-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -295,7 +298,7 @@
 		};
 	};
 
-	pm8005-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8005-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -466,6 +469,44 @@
 	status = "okay";
 };
 
+&q6afedai {
+	qi2s@22 {
+		reg = <22>;
+		qcom,sd-lines = <1>;
+	};
+
+	qi2s@23 {
+		reg = <23>;
+		qcom,sd-lines = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+
+	dai@3 {
+		reg = <3>;
+	};
+
+	dai@4 {
+		reg = <4>;
+	};
+
+	dai@5 {
+		reg = <5>;
+	};
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
@@ -494,6 +535,141 @@
 	bias-disable;
 };
 
+&sound {
+	compatible = "qcom,sdm845-sndcard";
+	pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	mm4-dai-link {
+		link-name = "MultiMedia4";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+		};
+	};
+
+	mm5-dai-link {
+		link-name = "MultiMedia5";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+		};
+	};
+
+	mm6-dai-link {
+		link-name = "MultiMedia6";
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+		};
+	};
+
+	speaker_playback_dai: speaker-dai-link {
+		link-name = "Speaker Playback";
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback 1";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture 1";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+
+	slim2-dai-link {
+		link-name = "SLIM Playback 2";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 2>; /* AIF2_PB */
+		};
+	};
+
+	slimcap2-dai-link {
+		link-name = "SLIM Capture 2";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 3>; /* AIF2_CAP */
+		};
+	};
+
+	slimcap3-dai-link {
+		link-name = "SLIM Capture 3";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_2_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 5>; /* AIF3_CAP */
+		};
+	};
+};
+
 &uart6 {
 	status = "okay";
 
@@ -613,6 +789,16 @@
 		bias-pull-down;
 		input-enable;
 	};
+
+	speaker_default: speaker-default-state {
+		mux {
+			pins = "gpio69";
+			function = "gpio";
+			drive-strength = <16>;
+			bias-pull-up;
+			output-high;
+		};
+	};
 };
 
 &venus {
@@ -620,6 +806,17 @@
 	firmware-name = "qcom/sdm845/oneplus6/venus.mbn";
 };
 
+&wcd9340 {
+	pinctrl-0 = <&wcd_intr_default>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+};
+
 &wifi {
 	status = "okay";
 	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;

arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts

@@ -32,3 +32,43 @@
 &bq27441_fg {
 	monitored-battery = <&battery>;
 };
+
+&i2c4 {
+	status = "okay";
+
+	max98927_codec: max98927@3a {
+		compatible = "maxim,max98927";
+		reg = <0x3a>;
+		#sound-dai-cells = <1>;
+
+		pinctrl-0 = <&speaker_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>;
+
+		vmon-slot-no = <1>;
+		imon-slot-no = <0>;
+	};
+};
+
+&sound {
+	model = "OnePlus 6";
+	audio-routing =	"RX_BIAS", "MCLK",
+			"AMIC2", "MIC BIAS2",
+			"AMIC3", "MIC BIAS4",
+			"AMIC4", "MIC BIAS1",
+			"AMIC5", "MIC BIAS4";
+};
+
+&speaker_playback_dai {
+	codec {
+		sound-dai = <&max98927_codec 0>;
+	};
+};
+
+&wcd9340 {
+	qcom,micbias1-microvolt = <1800000>;
+	qcom,micbias2-microvolt = <2700000>;
+	qcom,micbias3-microvolt = <1800000>;
+	qcom,micbias4-microvolt = <1800000>;
+};

arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts

@@ -29,10 +29,39 @@
 	compatible = "samsung,s6e3fc2x01";
 };
 
+&i2c4 {
+	/* nxp,tfa9894 @ 0x34 */
+};
+
 &bq27441_fg {
 	monitored-battery = <&battery>;
 };
 
+&sound {
+	model = "OnePlus 6T";
+	audio-routing = "RX_BIAS", "MCLK",
+			"AMIC1", "MIC BIAS3",
+			"AMIC2", "MIC BIAS2",
+			"AMIC3", "MIC BIAS4",
+			"AMIC4", "MIC BIAS1",
+			"AMIC5", "MIC BIAS3";
+
+};
+
+/*
+ * The TFA9894 codec is currently unsupported.
+ * We need to delete the node to allow the soundcard
+ * to probe for headphones/earpiece.
+ */
+/delete-node/ &speaker_playback_dai;
+
 &rmi4_f12 {
 	touchscreen-y-mm = <148>;
 };
+
+&wcd9340 {
+	qcom,micbias1-microvolt = <2700000>;
+	qcom,micbias2-microvolt = <2700000>;
+	qcom,micbias3-microvolt = <2700000>;
+	qcom,micbias4-microvolt = <2700000>;
+};

arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts

@@ -73,7 +73,7 @@
 
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -332,7 +332,7 @@
 		};
 	};
 
-	pm8005-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8005-rpmh-regulators";
 		qcom,pmic-id = "c";
 

arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts

@@ -111,7 +111,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -376,7 +376,7 @@
 		};
 	};
 
-	pmi8998-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pmi8998-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -390,7 +390,7 @@
 		};
 	};
 
-	pm8005-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8005-rpmh-regulators";
 		qcom,pmic-id = "c";
 

arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi

@@ -99,7 +99,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -329,7 +329,7 @@
 		};
 	};
 
-	pmi8998-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pmi8998-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -340,7 +340,7 @@
 		};
 	};
 
-	pm8005-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8005-rpmh-regulators";
 		qcom,pmic-id = "c";
 

arch/arm64/boot/dts/qcom/sdm845-wcd9340.dtsi

@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 SoC device tree source
+ *
+ * Copyright (c) 2018, The Linux Foundation. All rights reserved.
+ */
+
+&slim {
+	status = "okay";
+
+	slim@1 {
+		reg = <1>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		wcd9340_ifd: ifd@0,0 {
+			compatible = "slim217,250";
+			reg = <0 0>;
+		};
+
+		wcd9340: codec@1,0 {
+			compatible = "slim217,250";
+			reg = <1 0>;
+			slim-ifc-dev = <&wcd9340_ifd>;
+
+			#sound-dai-cells = <1>;
+
+			interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			clock-names = "extclk";
+			clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+
+			#clock-cells = <0>;
+			clock-frequency = <9600000>;
+			clock-output-names = "mclk";
+
+			pinctrl-0 = <&wcd_intr_default>;
+			pinctrl-names = "default";
+
+			qcom,micbias1-microvolt = <1800000>;
+			qcom,micbias2-microvolt = <1800000>;
+			qcom,micbias3-microvolt = <1800000>;
+			qcom,micbias4-microvolt = <1800000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			wcdgpio: gpio-controller@42 {
+				compatible = "qcom,wcd9340-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x42 0x2>;
+			};
+
+			swm: swm@c85 {
+				compatible = "qcom,soundwire-v1.3.0";
+				reg = <0xc85 0x40>;
+				interrupts-extended = <&wcd9340 20>;
+
+				qcom,dout-ports = <6>;
+				qcom,din-ports = <2>;
+				qcom,ports-sinterval-low = /bits/ 8  <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>;
+				qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>;
+				qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>;
+
+				#sound-dai-cells = <1>;
+				clocks = <&wcd9340>;
+				clock-names = "iface";
+				#address-cells = <2>;
+				#size-cells = <0>;
+			};
+		};
+	};
+};
+
+&tlmm {
+	wcd_intr_default: wcd-intr-default-state {
+		pins = "gpio54";
+		function = "gpio";
+
+		input-enable;
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+};

arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi

@@ -7,6 +7,7 @@
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
 #include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
 #include "pm8998.dtsi"
 #include "pmi8998.dtsi"
 
@@ -97,6 +98,12 @@
 			no-map;
 		};
 
+		/* Cont splash region set up by the bootloader */
+		cont_splash_mem: framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 0x2400000>;
+			no-map;
+		};
+
 		rmtfs_mem: memory@f6301000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0 0xf6301000 0 0x200000>;
@@ -123,7 +130,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -375,7 +382,7 @@
 };
 
 &sound {
-	compatible = "qcom,db845c-sndcard";
+	compatible = "qcom,db845c-sndcard", "qcom,sdm845-sndcard";
 	pinctrl-0 = <&quat_mi2s_active
 			&quat_mi2s_sd0_active>;
 	pinctrl-names = "default";
@@ -466,15 +473,6 @@
 		function = "gpio";
 		bias-pull-up;
 	};
-
-	wcd_intr_default: wcd-intr-default-state {
-		pins = "gpio54";
-		function = "gpio";
-
-		input-enable;
-		bias-pull-down;
-		drive-strength = <2>;
-	};
 };
 
 &uart6 {
@@ -543,10 +541,6 @@
 };
 
 &wcd9340 {
-	pinctrl-0 = <&wcd_intr_default>;
-	pinctrl-names = "default";
-	clock-names = "extclk";
-	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 	vdd-buck-supply = <&vreg_s4a_1p8>;
 	vdd-buck-sido-supply = <&vreg_s4a_1p8>;

arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts

@@ -13,6 +13,7 @@
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
 #include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
 #include "pm8998.dtsi"
 #include "pmi8998.dtsi"
 #include "pm8005.dtsi"
@@ -143,7 +144,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -343,7 +344,7 @@
 		};
 	};
 
-	pmi8998-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pmi8998-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -355,7 +356,7 @@
 		};
 	};
 
-	pm8005-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8005-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -616,14 +617,6 @@
 		drive-strength = <2>;
 		bias-pull-down;
 	};
-
-	wcd_intr_default: wcd-intr-default-state {
-		pins = "gpio54";
-		function = "gpio";
-		input-enable;
-		bias-pull-down;
-		drive-strength = <2>;
-	};
 };
 
 &uart6 {
@@ -700,10 +693,6 @@
 };
 
 &wcd9340 {
-	pinctrl-0 = <&wcd_intr_default>;
-	pinctrl-names = "default";
-	clock-names = "extclk";
-	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
 	vdd-buck-supply = <&vreg_s4a_1p8>;

arch/arm64/boot/dts/qcom/sdm845.dtsi

@@ -3841,65 +3841,7 @@
 			iommus = <&apps_smmu 0x1806 0x0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-
+			status = "disabled";
-			slim@1 {
-				reg = <1>;
-				#address-cells = <2>;
-				#size-cells = <0>;
-
-				wcd9340_ifd: ifd@0,0 {
-					compatible = "slim217,250";
-					reg = <0 0>;
-				};
-
-				wcd9340: codec@1,0 {
-					compatible = "slim217,250";
-					reg = <1 0>;
-					slim-ifc-dev = <&wcd9340_ifd>;
-
-					#sound-dai-cells = <1>;
-
-					interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>;
-					interrupt-controller;
-					#interrupt-cells = <1>;
-
-					#clock-cells = <0>;
-					clock-frequency = <9600000>;
-					clock-output-names = "mclk";
-					qcom,micbias1-microvolt = <1800000>;
-					qcom,micbias2-microvolt = <1800000>;
-					qcom,micbias3-microvolt = <1800000>;
-					qcom,micbias4-microvolt = <1800000>;
-
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					wcdgpio: gpio-controller@42 {
-						compatible = "qcom,wcd9340-gpio";
-						gpio-controller;
-						#gpio-cells = <2>;
-						reg = <0x42 0x2>;
-					};
-
-					swm: swm@c85 {
-						compatible = "qcom,soundwire-v1.3.0";
-						reg = <0xc85 0x40>;
-						interrupts-extended = <&wcd9340 20>;
-
-						qcom,dout-ports = <6>;
-						qcom,din-ports = <2>;
-						qcom,ports-sinterval-low = /bits/ 8  <0x07 0x1f 0x3f 0x7 0x1f 0x3f 0x0f 0x0f>;
-						qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x6 0x12 0x0d 0x07 0x0a>;
-						qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1f 0x00 0x00 0x1f 0x00 0x00>;
-
-						#sound-dai-cells = <1>;
-						clocks = <&wcd9340>;
-						clock-names = "iface";
-						#address-cells = <2>;
-						#size-cells = <0>;
-					};
-				};
-			};
 		};
 
 		lmh_cluster1: lmh@17d70800 {

arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts

@@ -13,6 +13,7 @@
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
 #include "sdm850.dtsi"
+#include "sdm845-wcd9340.dtsi"
 #include "pm8998.dtsi"
 
 /*
@@ -99,7 +100,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -512,7 +513,7 @@
 };
 
 &sound {
-	compatible = "qcom,db845c-sndcard";
+	compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard";
 	model = "Lenovo-YOGA-C630-13Q50";
 
 	audio-routing =
@@ -628,15 +629,6 @@
 		drive-strength = <2>;
 	};
 
-	wcd_intr_default: wcd-intr-default-state {
-		pins = "gpio54";
-		function = "gpio";
-
-		input-enable;
-		bias-pull-down;
-		drive-strength = <2>;
-	};
-
 	lid_pin_active: lid-pin-state {
 		pins = "gpio124";
 		function = "gpio";
@@ -747,10 +739,6 @@
 };
 
 &wcd9340 {
-	pinctrl-0 = <&wcd_intr_default>;
-	pinctrl-names = "default";
-	clock-names = "extclk";
-	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 	vdd-buck-supply = <&vreg_s4a_1p8>;
 	vdd-buck-sido-supply = <&vreg_s4a_1p8>;

arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts

@@ -14,6 +14,7 @@
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
 #include "sdm850.dtsi"
+#include "sdm845-wcd9340.dtsi"
 #include "pm8998.dtsi"
 
 /*
@@ -129,7 +130,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -552,15 +553,6 @@
 		 */
 		output-high;
 	};
-
-	wcd_intr_default: wcd-intr-default-state {
-		pins = "gpio54";
-		function = "gpio";
-
-		input-enable;
-		bias-pull-down;
-		drive-strength = <2>;
-	};
 };
 
 &uart6 {
@@ -656,10 +648,6 @@
 };
 
 &wcd9340 {
-	pinctrl-0 = <&wcd_intr_default>;
-	pinctrl-names = "default";
-	clock-names = "extclk";
-	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
 	reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 	vdd-buck-supply = <&vreg_s4a_1p8>;
 	vdd-buck-sido-supply = <&vreg_s4a_1p8>;

arch/arm64/boot/dts/qcom/sm6115.dtsi

@@ -345,25 +345,100 @@
 		};
 	};
 
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+
+		interrupts = <GIC_SPI 279 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 10>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		adsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		adsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+
+		interrupts = <GIC_SPI 263 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 30>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		cdsp_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		cdsp_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-mpss {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+
+		interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
+
+		mboxes = <&apcs_glb 14>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		modem_smp2p_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		modem_smp2p_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		compatible = "simple-bus";
-		#address-cells = <1>;
+		#address-cells = <2>;
-		#size-cells = <1>;
+		#size-cells = <2>;
-		ranges = <0 0 0 0xffffffff>;
+		ranges = <0 0 0 0 0x10 0>;
+		dma-ranges = <0 0 0 0 0x10 0>;
 
 		tcsr_mutex: hwlock@340000 {
 			compatible = "qcom,tcsr-mutex";
-			reg = <0x00340000 0x20000>;
+			reg = <0x0 0x00340000 0x0 0x20000>;
 			#hwlock-cells = <1>;
 		};
 
 		tlmm: pinctrl@500000 {
 			compatible = "qcom,sm6115-tlmm";
-			reg = <0x00500000 0x400000>, <0x00900000 0x400000>, <0x00d00000 0x400000>;
+			reg = <0x0 0x00500000 0x0 0x400000>,
+			      <0x0 0x00900000 0x0 0x400000>,
+			      <0x0 0x00d00000 0x0 0x400000>;
 			reg-names = "west", "south", "east";
 			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
-			gpio-ranges = <&tlmm 0 0 121>;
+			gpio-ranges = <&tlmm 0 0 114>; /* GPIOs + ufs_reset */
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -559,7 +634,7 @@
 
 		gcc: clock-controller@1400000 {
 			compatible = "qcom,gcc-sm6115";
-			reg = <0x01400000 0x1f0000>;
+			reg = <0x0 0x01400000 0x0 0x1f0000>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&sleep_clk>;
 			clock-names = "bi_tcxo", "sleep_clk";
 			#clock-cells = <1>;
@@ -569,7 +644,7 @@
 
 		usb_1_hsphy: phy@1613000 {
 			compatible = "qcom,sm6115-qusb2-phy";
-			reg = <0x01613000 0x180>;
+			reg = <0x0 0x01613000 0x0 0x180>;
 			#phy-cells = <0>;
 
 			clocks = <&gcc GCC_AHB2PHY_USB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>;
@@ -583,7 +658,7 @@
 
 		qfprom@1b40000 {
 			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
-			reg = <0x01b40000 0x7000>;
+			reg = <0x0 0x01b40000 0x0 0x7000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
@@ -595,18 +670,18 @@
 
 		rng: rng@1b53000 {
 			compatible = "qcom,prng-ee";
-			reg = <0x01b53000 0x1000>;
+			reg = <0x0 0x01b53000 0x0 0x1000>;
 			clocks = <&gcc GCC_PRNG_AHB_CLK>;
 			clock-names = "core";
 		};
 
 		spmi_bus: spmi@1c40000 {
 			compatible = "qcom,spmi-pmic-arb";
-			reg = <0x01c40000 0x1100>,
+			reg = <0x0 0x01c40000 0x0 0x1100>,
-			      <0x01e00000 0x2000000>,
+			      <0x0 0x01e00000 0x0 0x2000000>,
-			      <0x03e00000 0x100000>,
+			      <0x0 0x03e00000 0x0 0x100000>,
-			      <0x03f00000 0xa0000>,
+			      <0x0 0x03f00000 0x0 0xa0000>,
-			      <0x01c0a000 0x26000>;
+			      <0x0 0x01c0a000 0x0 0x26000>;
 			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 			interrupt-names = "periph_irq";
 			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
@@ -620,8 +695,8 @@
 
 		tsens0: thermal-sensor@4410000 {
 			compatible = "qcom,sm6115-tsens", "qcom,tsens-v2";
-			reg = <0x04411000 0x1ff>, /* TM */
+			reg = <0x0 0x04411000 0x0 0x1ff>, /* TM */
-			      <0x04410000 0x8>; /* SROT */
+			      <0x0 0x04410000 0x0 0x8>; /* SROT */
 			#qcom,sensors = <16>;
 			interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
@@ -631,17 +706,19 @@
 
 		rpm_msg_ram: sram@45f0000 {
 			compatible = "qcom,rpm-msg-ram";
-			reg = <0x045f0000 0x7000>;
+			reg = <0x0 0x045f0000 0x0 0x7000>;
 		};
 
 		sram@4690000 {
 			compatible = "qcom,rpm-stats";
-			reg = <0x04690000 0x10000>;
+			reg = <0x0 0x04690000 0x0 0x10000>;
 		};
 
 		sdhc_1: mmc@4744000 {
 			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0x04744000 0x1000>, <0x04745000 0x1000>, <0x04748000 0x8000>;
+			reg = <0x0 0x04744000 0x0 0x1000>,
+			      <0x0 0x04745000 0x0 0x1000>,
+			      <0x0 0x04748000 0x0 0x8000>;
 			reg-names = "hc", "cqhci", "ice";
 
 			interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
@@ -664,7 +741,7 @@
 
 		sdhc_2: mmc@4784000 {
 			compatible = "qcom,sm6115-sdhci", "qcom,sdhci-msm-v5";
-			reg = <0x04784000 0x1000>;
+			reg = <0x0 0x04784000 0x0 0x1000>;
 			reg-names = "hc";
 
 			interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
@@ -707,7 +784,7 @@
 
 		ufs_mem_hc: ufs@4804000 {
 			compatible = "qcom,sm6115-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
-			reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
+			reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&ufs_mem_phy_lanes>;
@@ -751,9 +828,9 @@
 
 		ufs_mem_phy: phy@4807000 {
 			compatible = "qcom,sm6115-qmp-ufs-phy";
-			reg = <0x04807000 0x1c4>;
+			reg = <0x0 0x04807000 0x0 0x1c4>;
-			#address-cells = <1>;
+			#address-cells = <2>;
-			#size-cells = <1>;
+			#size-cells = <2>;
 			ranges;
 
 			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
@@ -764,16 +841,16 @@
 			status = "disabled";
 
 			ufs_mem_phy_lanes: phy@4807400 {
-				reg = <0x04807400 0x098>,
+				reg = <0x0 0x04807400 0x0 0x098>,
-				      <0x04807600 0x130>,
+				      <0x0 0x04807600 0x0 0x130>,
-				      <0x04807c00 0x16c>;
+				      <0x0 0x04807c00 0x0 0x16c>;
 				#phy-cells = <0>;
 			};
 		};
 
 		gpi_dma0: dma-controller@4a00000 {
 			compatible = "qcom,sm6115-gpi-dma", "qcom,sm6350-gpi-dma";
-			reg = <0x04a00000 0x60000>;
+			reg = <0x0 0x04a00000 0x0 0x60000>;
 			interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
@@ -793,19 +870,19 @@
 
 		qupv3_id_0: geniqup@4ac0000 {
 			compatible = "qcom,geni-se-qup";
-			reg = <0x04ac0000 0x2000>;
+			reg = <0x0 0x04ac0000 0x0 0x2000>;
 			clock-names = "m-ahb", "s-ahb";
 			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
 				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
-			#address-cells = <1>;
+			#address-cells = <2>;
-			#size-cells = <1>;
+			#size-cells = <2>;
 			iommus = <&apps_smmu 0xe3 0x0>;
 			ranges;
 			status = "disabled";
 
 			i2c0: i2c@4a80000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0x04a80000 0x4000>;
+				reg = <0x0 0x04a80000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				pinctrl-names = "default";
@@ -821,7 +898,7 @@
 
 			spi0: spi@4a80000 {
 				compatible = "qcom,geni-spi";
-				reg = <0x04a80000 0x4000>;
+				reg = <0x0 0x04a80000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
 				pinctrl-names = "default";
@@ -837,7 +914,7 @@
 
 			i2c1: i2c@4a84000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0x04a84000 0x4000>;
+				reg = <0x0 0x04a84000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				pinctrl-names = "default";
@@ -853,7 +930,7 @@
 
 			spi1: spi@4a84000 {
 				compatible = "qcom,geni-spi";
-				reg = <0x04a84000 0x4000>;
+				reg = <0x0 0x04a84000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
 				pinctrl-names = "default";
@@ -869,7 +946,7 @@
 
 			i2c2: i2c@4a88000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0x04a88000 0x4000>;
+				reg = <0x0 0x04a88000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				pinctrl-names = "default";
@@ -885,7 +962,7 @@
 
 			spi2: spi@4a88000 {
 				compatible = "qcom,geni-spi";
-				reg = <0x04a88000 0x4000>;
+				reg = <0x0 0x04a88000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
 				pinctrl-names = "default";
@@ -901,7 +978,7 @@
 
 			i2c3: i2c@4a8c000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0x04a8c000 0x4000>;
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				pinctrl-names = "default";
@@ -917,7 +994,7 @@
 
 			spi3: spi@4a8c000 {
 				compatible = "qcom,geni-spi";
-				reg = <0x04a8c000 0x4000>;
+				reg = <0x0 0x04a8c000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
 				pinctrl-names = "default";
@@ -933,7 +1010,7 @@
 
 			i2c4: i2c@4a90000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0x04a90000 0x4000>;
+				reg = <0x0 0x04a90000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				pinctrl-names = "default";
@@ -949,7 +1026,7 @@
 
 			spi4: spi@4a90000 {
 				compatible = "qcom,geni-spi";
-				reg = <0x04a90000 0x4000>;
+				reg = <0x0 0x04a90000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
 				pinctrl-names = "default";
@@ -963,9 +1040,18 @@
 				status = "disabled";
 			};
 
+			uart4: serial@4a90000 {
+				compatible = "qcom,geni-debug-uart";
+				reg = <0x0 0x04a90000 0x0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			i2c5: i2c@4a94000 {
 				compatible = "qcom,geni-i2c";
-				reg = <0x04a94000 0x4000>;
+				reg = <0x0 0x04a94000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				pinctrl-names = "default";
@@ -981,7 +1067,7 @@
 
 			spi5: spi@4a94000 {
 				compatible = "qcom,geni-spi";
-				reg = <0x04a94000 0x4000>;
+				reg = <0x0 0x04a94000 0x0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
 				pinctrl-names = "default";
@@ -992,15 +1078,14 @@
 				dma-names = "tx", "rx";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				status = "disabled";
 			};
 		};
 
 		usb_1: usb@4ef8800 {
 			compatible = "qcom,sm6115-dwc3", "qcom,dwc3";
-			reg = <0x04ef8800 0x400>;
+			reg = <0x0 0x04ef8800 0x0 0x400>;
-			#address-cells = <1>;
+			#address-cells = <2>;
-			#size-cells = <1>;
+			#size-cells = <2>;
 			ranges;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
@@ -1026,7 +1111,7 @@
 
 			usb_1_dwc3: usb@4e00000 {
 				compatible = "snps,dwc3";
-				reg = <0x04e00000 0xcd00>;
+				reg = <0x0 0x04e00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb_1_hsphy>;
 				phy-names = "usb2-phy";
@@ -1043,7 +1128,7 @@
 
 		mdss: display-subsystem@5e00000 {
 			compatible = "qcom,sm6115-mdss";
-			reg = <0x05e00000 0x1000>;
+			reg = <0x0 0x05e00000 0x0 0x1000>;
 			reg-names = "mdss";
 
 			power-domains = <&dispcc MDSS_GDSC>;
@@ -1059,16 +1144,16 @@
 			iommus = <&apps_smmu 0x420 0x2>,
 				 <&apps_smmu 0x421 0x0>;
 
-			#address-cells = <1>;
+			#address-cells = <2>;
-			#size-cells = <1>;
+			#size-cells = <2>;
 			ranges;
 
 			status = "disabled";
 
 			mdp: display-controller@5e01000 {
 				compatible = "qcom,sm6115-dpu";
-				reg = <0x05e01000 0x8f000>,
+				reg = <0x0 0x05e01000 0x0 0x8f000>,
-				      <0x05eb0000 0x2008>;
+				      <0x0 0x05eb0000 0x0 0x2008>;
 				reg-names = "mdp", "vbif";
 
 				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
@@ -1097,7 +1182,7 @@
 					port@0 {
 						reg = <0>;
 						dpu_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+							remote-endpoint = <&mdss_dsi0_in>;
 						};
 					};
 				};
@@ -1132,9 +1217,9 @@
 				};
 			};
 
-			dsi0: dsi@5e94000 {
+			mdss_dsi0: dsi@5e94000 {
 				compatible = "qcom,dsi-ctrl-6g-qcm2290";
-				reg = <0x05e94000 0x400>;
+				reg = <0x0 0x05e94000 0x0 0x400>;
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
@@ -1155,11 +1240,11 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
 
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmpd SM6115_VDDCX>;
-				phys = <&dsi0_phy>;
+				phys = <&mdss_dsi0_phy>;
 
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1172,14 +1257,14 @@
 
 					port@0 {
 						reg = <0>;
-						dsi0_in: endpoint {
+						mdss_dsi0_in: endpoint {
 							remote-endpoint = <&dpu_intf1_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi0_out: endpoint {
+						mdss_dsi0_out: endpoint {
 						};
 					};
 				};
@@ -1204,11 +1289,11 @@
 				};
 			};
 
-			dsi0_phy: phy@5e94400 {
+			mdss_dsi0_phy: phy@5e94400 {
 				compatible = "qcom,dsi-phy-14nm-2290";
-				reg = <0x05e94400 0x100>,
+				reg = <0x0 0x05e94400 0x0 0x100>,
-				      <0x05e94500 0x300>,
+				      <0x0 0x05e94500 0x0 0x300>,
-				      <0x05e94800 0x188>;
+				      <0x0 0x05e94800 0x0 0x188>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
@@ -1226,11 +1311,11 @@
 
 		dispcc: clock-controller@5f00000 {
 			compatible = "qcom,sm6115-dispcc";
-			reg = <0x05f00000 0x20000>;
+			reg = <0x0 0x05f00000 0 0x20000>;
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 				 <&sleep_clk>,
-				 <&dsi0_phy 0>,
+				 <&mdss_dsi0_phy 0>,
-				 <&dsi0_phy 1>,
+				 <&mdss_dsi0_phy 1>,
 				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -1239,8 +1324,8 @@
 
 		stm@8002000 {
 			compatible = "arm,coresight-stm", "arm,primecell";
-			reg = <0x08002000 0x1000>,
+			reg = <0x0 0x08002000 0x0 0x1000>,
-			      <0x0e280000 0x180000>;
+			      <0x0 0x0e280000 0x0 0x180000>;
 			reg-names = "stm-base", "stm-stimulus-base";
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
@@ -1259,7 +1344,7 @@
 
 		cti0: cti@8010000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x08010000 0x1000>;
+			reg = <0x0 0x08010000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1269,7 +1354,7 @@
 
 		cti1: cti@8011000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x08011000 0x1000>;
+			reg = <0x0 0x08011000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1279,7 +1364,7 @@
 
 		cti2: cti@8012000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x08012000 0x1000>;
+			reg = <0x0 0x08012000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1289,7 +1374,7 @@
 
 		cti3: cti@8013000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x08013000 0x1000>;
+			reg = <0x0 0x08013000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1299,7 +1384,7 @@
 
 		cti4: cti@8014000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x08014000 0x1000>;
+			reg = <0x0 0x08014000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1309,7 +1394,7 @@
 
 		cti5: cti@8015000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x08015000 0x1000>;
+			reg = <0x0 0x08015000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1319,7 +1404,7 @@
 
 		cti6: cti@8016000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x08016000 0x1000>;
+			reg = <0x0 0x08016000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1329,7 +1414,7 @@
 
 		cti7: cti@8017000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x08017000 0x1000>;
+			reg = <0x0 0x08017000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1339,7 +1424,7 @@
 
 		cti8: cti@8018000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x08018000 0x1000>;
+			reg = <0x0 0x08018000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1349,7 +1434,7 @@
 
 		cti9: cti@8019000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x08019000 0x1000>;
+			reg = <0x0 0x08019000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1359,7 +1444,7 @@
 
 		cti10: cti@801a000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x0801a000 0x1000>;
+			reg = <0x0 0x0801a000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1369,7 +1454,7 @@
 
 		cti11: cti@801b000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x0801b000 0x1000>;
+			reg = <0x0 0x0801b000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1379,7 +1464,7 @@
 
 		cti12: cti@801c000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x0801c000 0x1000>;
+			reg = <0x0 0x0801c000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1389,7 +1474,7 @@
 
 		cti13: cti@801d000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x0801d000 0x1000>;
+			reg = <0x0 0x0801d000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1399,7 +1484,7 @@
 
 		cti14: cti@801e000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x0801e000 0x1000>;
+			reg = <0x0 0x0801e000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1409,7 +1494,7 @@
 
 		cti15: cti@801f000 {
 			compatible = "arm,coresight-cti", "arm,primecell";
-			reg = <0x0801f000 0x1000>;
+			reg = <0x0 0x0801f000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1419,7 +1504,7 @@
 
 		replicator@8046000 {
 			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
-			reg = <0x08046000 0x1000>;
+			reg = <0x0 0x08046000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1445,7 +1530,7 @@
 
 		etf@8047000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x08047000 0x1000>;
+			reg = <0x0 0x08047000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1471,7 +1556,7 @@
 
 		etr@8048000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
-			reg = <0x08048000 0x1000>;
+			reg = <0x0 0x08048000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1489,7 +1574,7 @@
 
 		funnel@8041000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x08041000 0x1000>;
+			reg = <0x0 0x08041000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1515,7 +1600,7 @@
 
 		funnel@8042000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x08042000 0x1000>;
+			reg = <0x0 0x08042000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1541,7 +1626,7 @@
 
 		funnel@8045000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x08045000 0x1000>;
+			reg = <0x0 0x08045000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1578,7 +1663,7 @@
 
 		etm@9040000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x09040000 0x1000>;
+			reg = <0x0 0x09040000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1599,7 +1684,7 @@
 
 		etm@9140000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x09140000 0x1000>;
+			reg = <0x0 0x09140000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1620,7 +1705,7 @@
 
 		etm@9240000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x09240000 0x1000>;
+			reg = <0x0 0x09240000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1641,7 +1726,7 @@
 
 		etm@9340000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x09340000 0x1000>;
+			reg = <0x0 0x09340000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1662,7 +1747,7 @@
 
 		etm@9440000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x09440000 0x1000>;
+			reg = <0x0 0x09440000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1683,7 +1768,7 @@
 
 		etm@9540000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x09540000 0x1000>;
+			reg = <0x0 0x09540000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1704,7 +1789,7 @@
 
 		etm@9640000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x09640000 0x1000>;
+			reg = <0x0 0x09640000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1725,7 +1810,7 @@
 
 		etm@9740000 {
 			compatible = "arm,coresight-etm4x", "arm,primecell";
-			reg = <0x09740000 0x1000>;
+			reg = <0x0 0x09740000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1746,7 +1831,7 @@
 
 		funnel@9800000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x09800000 0x1000>;
+			reg = <0x0 0x09800000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1825,7 +1910,7 @@
 
 		funnel@9810000 {
 			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
-			reg = <0x09810000 0x1000>;
+			reg = <0x0 0x09810000 0x0 0x1000>;
 
 			clocks = <&rpmcc RPM_SMD_QDSS_CLK>;
 			clock-names = "apb_pclk";
@@ -1851,7 +1936,7 @@
 
 		apps_smmu: iommu@c600000 {
 			compatible = "qcom,sm6115-smmu-500", "qcom,smmu-500", "arm,mmu-500";
-			reg = <0x0c600000 0x80000>;
+			reg = <0x0 0x0c600000 0x0 0x80000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
 
@@ -1924,7 +2009,7 @@
 
 		wifi: wifi@c800000 {
 			compatible = "qcom,wcn3990-wifi";
-			reg = <0x0c800000 0x800000>;
+			reg = <0x0 0x0c800000 0x0 0x800000>;
 			reg-names = "membase";
 			memory-region = <&wlan_msa_mem>;
 			interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
@@ -1944,65 +2029,72 @@
 			status = "disabled";
 		};
 
+		watchdog@f017000 {
+			compatible = "qcom,apss-wdt-sm6115", "qcom,kpss-wdt";
+			reg = <0x0 0x0f017000 0x0 0x1000>;
+			clocks = <&sleep_clk>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		apcs_glb: mailbox@f111000 {
 			compatible = "qcom,sm6115-apcs-hmss-global";
-			reg = <0x0f111000 0x1000>;
+			reg = <0x0 0x0f111000 0x0 0x1000>;
 
 			#mbox-cells = <1>;
 		};
 
 		timer@f120000 {
 			compatible = "arm,armv7-timer-mem";
-			reg = <0x0f120000 0x1000>;
+			reg = <0x0 0x0f120000 0x0 0x1000>;
-			#address-cells = <1>;
+			#address-cells = <2>;
-			#size-cells = <1>;
+			#size-cells = <2>;
 			ranges;
 			clock-frequency = <19200000>;
 
 			frame@f121000 {
-				reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>;
+				reg = <0x0 0x0f121000 0x0 0x1000>, <0x0 0x0f122000 0x0 0x1000>;
 				frame-number = <0>;
 				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			frame@f123000 {
-				reg = <0x0f123000 0x1000>;
+				reg = <0x0 0x0f123000 0x0 0x1000>;
 				frame-number = <1>;
 				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f124000 {
-				reg = <0x0f124000 0x1000>;
+				reg = <0x0 0x0f124000 0x0 0x1000>;
 				frame-number = <2>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f125000 {
-				reg = <0x0f125000 0x1000>;
+				reg = <0x0 0x0f125000 0x0 0x1000>;
 				frame-number = <3>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f126000 {
-				reg = <0x0f126000 0x1000>;
+				reg = <0x0 0x0f126000 0x0 0x1000>;
 				frame-number = <4>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f127000 {
-				reg = <0x0f127000 0x1000>;
+				reg = <0x0 0x0f127000 0x0 0x1000>;
 				frame-number = <5>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 
 			frame@f128000 {
-				reg = <0x0f128000 0x1000>;
+				reg = <0x0 0x0f128000 0x0 0x1000>;
 				frame-number = <6>;
 				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -2011,7 +2103,8 @@
 
 		intc: interrupt-controller@f200000 {
 			compatible = "arm,gic-v3";
-			reg = <0x0f200000 0x10000>, <0x0f300000 0x100000>;
+			reg = <0x0 0x0f200000 0x0 0x10000>,
+			      <0x0 0x0f300000 0x0 0x100000>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupt-parent = <&intc>;
@@ -2022,7 +2115,8 @@
 
 		cpufreq_hw: cpufreq@f521000 {
 			compatible = "qcom,cpufreq-hw";
-			reg = <0x0f521000 0x1000>, <0x0f523000 0x1000>;
+			reg = <0x0 0x0f521000 0x0 0x1000>,
+			      <0x0 0x0f523000 0x0 0x1000>;
 
 			reg-names = "freq-domain0", "freq-domain1";
 			clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;

arch/arm64/boot/dts/qcom/sm6350.dtsi

@@ -6,6 +6,7 @@
 
 #include <dt-bindings/clock/qcom,gcc-sm6350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,sm6350-camcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
@@ -13,6 +14,7 @@
 #include <dt-bindings/interconnect/qcom,sm6350.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
@@ -1314,49 +1316,26 @@
 			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
 		};
 
-		usb_1_qmpphy: phy@88e9000 {
+		usb_1_qmpphy: phy@88e8000 {
-			compatible = "qcom,sc7180-qmp-usb3-dp-phy";
+			compatible = "qcom,sm6350-qmp-usb3-dp-phy";
-			reg = <0 0x088e9000 0 0x200>,
+			reg = <0 0x088e8000 0 0x3000>;
-			      <0 0x088e8000 0 0x40>,
-			      <0 0x088ea000 0 0x200>;
-			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&xo_board>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-				 <&rpmhcc RPMH_QLINK_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
+			clock-names = "aux", "ref", "com_aux", "usb3_pipe";
 
-			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+			power-domains = <&gcc USB30_PRIM_GDSC>;
-				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
-			usb_1_ssphy: usb3-phy@88e9200 {
+			#clock-cells = <1>;
-				reg = <0 0x088e9200 0 0x200>,
+			#phy-cells = <1>;
-				      <0 0x088e9400 0 0x200>,
-				      <0 0x088e9c00 0 0x400>,
-				      <0 0x088e9600 0 0x200>,
-				      <0 0x088e9800 0 0x200>,
-				      <0 0x088e9a00 0 0x100>;
-				#clock-cells = <0>;
-				#phy-cells = <0>;
-				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
 
-			dp_phy: dp-phy@88ea200 {
+			status = "disabled";
-				reg = <0 0x088ea200 0 0x200>,
-				      <0 0x088ea400 0 0x200>,
-				      <0 0x088eaa00 0 0x200>,
-				      <0 0x088ea600 0 0x200>,
-				      <0 0x088ea800 0 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <1>;
-			};
 		};
 
 		dc_noc: interconnect@9160000 {
@@ -1430,11 +1409,109 @@
 				snps,dis_enblslpm_quirk;
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
-				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
 
+		cci0: cci@ac4a000 {
+			compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4a000 0 0x1000>;
+			interrupts = <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SOC_AHB_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_0_CLK>,
+				 <&camcc CAMCC_CCI_0_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "soc_ahb",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+
+			assigned-clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+					  <&camcc CAMCC_CCI_0_CLK>;
+			assigned-clock-rates = <80000000>, <37500000>;
+
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-1 = <&cci0_sleep &cci1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac4b000 {
+			compatible = "qcom,sm6350-cci", "qcom,msm8996-cci";
+			reg = <0 0x0ac4b000 0 0x1000>;
+			interrupts = <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+				 <&camcc CAMCC_SOC_AHB_CLK>,
+				 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAMCC_CPAS_AHB_CLK>,
+				 <&camcc CAMCC_CCI_1_CLK>,
+				 <&camcc CAMCC_CCI_1_CLK_SRC>;
+			clock-names = "camnoc_axi",
+				      "soc_ahb",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "cci",
+				      "cci_src";
+
+			assigned-clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
+					  <&camcc CAMCC_CCI_1_CLK>;
+			assigned-clock-rates = <80000000>, <37500000>;
+
+			pinctrl-0 = <&cci2_default>;
+			pinctrl-1 = <&cci2_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			/* SM6350 seems to have cci1_i2c1 on gpio2 & gpio3 but unused downstream */
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sm6350-camcc";
+			reg = <0 0x0ad00000 0 0x16000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm6350-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>;
@@ -1513,6 +1590,48 @@
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 157>;
 
+			cci0_default: cci0-default-state {
+				pins = "gpio39", "gpio40";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci0_sleep: cci0-sleep-state {
+				pins = "gpio39", "gpio40";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio41", "gpio42";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci1_sleep: cci1-sleep-state {
+				pins = "gpio41", "gpio42";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_default: cci2-default-state {
+				pins = "gpio43", "gpio44";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			cci2_sleep: cci2-sleep-state {
+				pins = "gpio43", "gpio44";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			sdc2_off_state: sdc2-off-state {
 				clk-pins {
 					pins = "sdc2_clk";

arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts

@@ -115,7 +115,7 @@
 };
 
 &apps_rsc {
-	pm6350-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm6350-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -244,7 +244,7 @@
 		};
 	};
 
-	pm6150l-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm6150l-rpmh-regulators";
 		qcom,pmic-id = "e";
 
@@ -334,6 +334,26 @@
 	};
 };
 
+&cci0 {
+	status = "okay";
+};
+
+&cci0_i2c0 {
+	/* IMX582 @ 0x1a */
+};
+
+&cci0_i2c1 {
+	/* IMX582 @ 0x1a */
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	/* IMX576 @ 0x10 */
+};
+
 &cdsp {
 	status = "okay";
 	firmware-name = "qcom/sm7225/fairphone4/cdsp.mdt";

arch/arm64/boot/dts/qcom/sm8150-hdk.dts

@@ -56,7 +56,7 @@
 };
 
 &apps_rsc {
-	pm8150-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8150-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -211,7 +211,7 @@
 		};
 	};
 
-	pm8150l-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8150l-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -324,7 +324,7 @@
 		};
 	};
 
-	pm8009-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8009-rpmh-regulators";
 		qcom,pmic-id = "f";
 

arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts

@@ -61,7 +61,7 @@
 };
 
 &apps_rsc {
-	pm8150-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8150-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -216,7 +216,7 @@
 		};
 	};
 
-	pm8150l-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8150l-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -329,7 +329,7 @@
 		};
 	};
 
-	pm8009-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8009-rpmh-regulators";
 		qcom,pmic-id = "f";
 

arch/arm64/boot/dts/qcom/sm8150-mtp.dts

@@ -51,7 +51,7 @@
 };
 
 &apps_rsc {
-	pm8150-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8150-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -206,7 +206,7 @@
 		};
 	};
 
-	pm8150l-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8150l-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -319,7 +319,7 @@
 		};
 	};
 
-	pm8009-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8009-rpmh-regulators";
 		qcom,pmic-id = "f";
 

arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano.dtsi

@@ -173,7 +173,7 @@
 };
 
 &apps_rsc {
-	pm8150-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8150-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -306,7 +306,7 @@
 		};
 	};
 
-	pm8150l-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8150l-rpmh-regulators";
 		qcom,pmic-id = "c";
 

arch/arm64/boot/dts/qcom/sm8250-hdk.dts

@@ -65,7 +65,7 @@
 };
 
 &apps_rsc {
-	pm8150-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8150-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -199,7 +199,7 @@
 		};
 	};
 
-	pm8150l-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8150l-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -310,7 +310,7 @@
 		};
 	};
 
-	pm8009-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8009-rpmh-regulators";
 		qcom,pmic-id = "f";
 

arch/arm64/boot/dts/qcom/sm8250-mtp.dts

@@ -187,7 +187,7 @@
 };
 
 &apps_rsc {
-	pm8150-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8150-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -321,7 +321,7 @@
 		};
 	};
 
-	pm8150l-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8150l-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -432,7 +432,7 @@
 		};
 	};
 
-	pm8009-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8009-rpmh-regulators";
 		qcom,pmic-id = "f";
 
@@ -759,6 +759,8 @@
 };
 
 &swr0 {
+	status = "okay";
+
 	left_spkr: speaker@0,3 {
 		compatible = "sdw10217211000";
 		reg = <0 3>;
@@ -892,3 +894,7 @@
 &venus {
 	status = "okay";
 };
+
+&wsamacro {
+	status = "okay";
+};

arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi

@@ -123,7 +123,7 @@
 };
 
 &apps_rsc {
-	pm8150-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8150-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -247,7 +247,7 @@
 	 * ab: 4600000-6100000
 	 * ibb: 800000-5400000
 	 */
-	pm8150l-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8150l-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -360,7 +360,7 @@
 		};
 	};
 
-	pm8009-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8009-rpmh-regulators";
 		qcom,pmic-id = "f";
 

arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish.dts

@@ -0,0 +1,630 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
+
+/*
+ * Delete following upstream (sm8250.dtsi) reserved
+ * memory mappings which are different on this device.
+ */
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_secure_heap;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &xbl_aop_mem;
+
+/ {
+	model = "Xiaomi Mi Pad 5 Pro";
+	compatible = "xiaomi,elish", "qcom,sm8250";
+	classis-type = "tablet";
+
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
+	qcom,board-id = <0x10008 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			width = <1600>;
+			height = <2560>;
+			stride = <(1600 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	battery_l: battery-l {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16600000>;
+		charge-full-design-microamp-hours = <4300000>;
+	};
+
+	battery_r: battery-r {
+		compatible = "simple-battery";
+		voltage-min-design-microvolt = <3870000>;
+		energy-full-design-microwatt-hours = <16600000>;
+		charge-full-design-microamp-hours = <4300000>;
+	};
+
+	bl_vddpos_5p5: bl-vddpos-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddpos_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	bl_vddneg_5p5: bl-vddneg-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_vddneg_5p5";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+		regulator-enable-ramp-delay = <233>;
+		gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_n>;
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			gpio-key,wakeup;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	/* S6c is really ebi.lvl but it's there for supply map completeness sake. */
+	vreg_s6c_0p88: smpc6-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s6c_0p88";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		regulator-always-on;
+		vin-supply = <&vph_pwr>;
+	};
+
+	reserved-memory {
+		xbl_aop_mem: xbl-aop@80700000 {
+			reg = <0x0 0x80600000 0x0 0x260000>;
+			no-map;
+		};
+
+		slpi_mem: slpi@88c00000 {
+			reg = <0x0 0x88c00000 0x0 0x2f00000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@8bb00000 {
+			reg = <0x0 0x8bb00000 0x0 0x2500000>;
+			no-map;
+		};
+
+		spss_mem: spss@8e000000 {
+			reg = <0x0 0x8e000000 0x0 0x100000>;
+			no-map;
+		};
+
+		cdsp_secure_heap: cdsp-secure-heap@8e100000 {
+			reg = <0x0 0x8e100000 0x0 0x4600000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@b0000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xb0000000 0x0 0x400000>;
+			record-size = <0x1000>;
+			console-size = <0x200000>;
+			ecc-size = <16>;
+			no-map;
+		};
+	};
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/xiaomi/elish/adsp.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
+		vdd-l2-l10-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
+		vdd-l6-l9-supply = <&vreg_s8c_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
+		vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+		/* (S1+S2+S3) - cx.lvl (ARC) */
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_1p9: smps5 {
+			regulator-name = "vreg_s5a_1p9";
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s6a_0p95: smps6 {
+			regulator-name = "vreg_s6a_0p95";
+			regulator-min-microvolt = <950000>;
+			regulator-max-microvolt = <1128000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3a_0p9: ldo3 {
+			regulator-name = "vreg_l3a_0p9";
+			regulator-min-microvolt = <928000>;
+			regulator-max-microvolt = <932000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L4 - lmx.lvl (ARC) */
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L7 is unused. */
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L10 is unused, L11 - lcx.lvl (ARC) */
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L13 is unused. */
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-name = "vreg_l14a_1p88";
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L15 & L16 are unused. */
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_0p9: ldo18 {
+			regulator-name = "vreg_l18a_0p9";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/*
+	 * Remaining regulators that are not yet supported:
+	 * OLEDB: 4925000-8100000
+	 * ab: 4600000-6100000
+	 * ibb: 800000-5400000
+	 */
+	regulators-1 {
+		compatible = "qcom,pm8150l-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+		vdd-l2-l3-supply = <&vreg_s8c_1p35>;
+		vdd-l4-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-l11-supply = <&vreg_bob>;
+		vdd-l9-l10-supply = <&vreg_bob>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3350000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		/*
+		 * S1-S6 are ARCs:
+		 * (S1+S2) - gfx.lvl,
+		 * S3 - mx.lvl,
+		 * (S4+S5) - mmcx.lvl,
+		 * S6 - ebi.lvl
+		 */
+
+		vreg_s7c_0p35: smps7 {
+			regulator-name = "vreg_s7c_0p35";
+			regulator-min-microvolt = <348000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s8c_1p35: smps8 {
+			regulator-name = "vreg_s8c_1p35";
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L2-4 are unused. */
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p9: ldo6 {
+			regulator-name = "vreg_l6c_2p9";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_2p85: ldo7 {
+			regulator-name = "vreg_l7c_2p85";
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p9: ldo9 {
+			regulator-name = "vreg_l9c_2p9";
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_3p3: ldo10 {
+			regulator-name = "vreg_l10c_3p3";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3296000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_3p0: ldo11 {
+			regulator-name = "vreg_l11c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pm8009-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vreg_bob>;
+		vdd-l2-supply = <&vreg_s8c_1p35>;
+		vdd-l5-l6-supply = <&vreg_bob>;
+		vdd-l7-supply = <&vreg_s4a_1p8>;
+
+		vreg_s1f_1p2: smps1 {
+			regulator-name = "vreg_s1f_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2f_0p5: smps2 {
+			regulator-name = "vreg_s2f_0p5";
+			regulator-min-microvolt = <512000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L1 is unused. */
+
+		vreg_l2f_1p3: ldo2 {
+			regulator-name = "vreg_l2f_1p3";
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/* L3 & L4 are unused. */
+
+		vreg_l5f_2p8: ldo5 {
+			regulator-name = "vreg_l5f_2p85";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6f_2p8: ldo6 {
+			regulator-name = "vreg_l6f_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7f_1p8: ldo7 {
+			regulator-name = "vreg_l7f_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/xiaomi/elish/cdsp.mbn";
+	status = "okay";
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sm8250/xiaomi/elish/a650_zap.mbn";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_r>;
+	};
+};
+
+&i2c11 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	backlight: backlight@11 {
+		compatible = "kinetic,ktz8866";
+		reg = <0x11>;
+		vddpos-supply = <&bl_vddpos_5p5>;
+		vddneg-supply = <&bl_vddneg_5p5>;
+		enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+		current-num-sinks = <5>;
+		kinetic,current-ramp-delay-ms = <128>;
+		kinetic,led-enable-ramp-delay-ms = <1>;
+		kinetic,enable-lcd-bias;
+	};
+};
+
+&i2c13 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27z561";
+		reg = <0x55>;
+		monitored-battery = <&battery_l>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&pm8150_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/xiaomi/elish/slpi.mbn";
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <40 4>;
+};
+
+&usb_1 {
+	/* USB 2.0 only */
+	qcom,select-utmi-as-pipe-clk;
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+	maximum-spped = "high-speed";
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+	status = "okay";
+};
+
+&venus {
+	firmware-name = "qcom/sm8250/elish/venus.mbn";
+	status = "okay";
+};

arch/arm64/boot/dts/qcom/sm8250.dtsi

@@ -2239,6 +2239,8 @@
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&wsa_swr_active>;
+
+			status = "disabled";
 		};
 
 		swr0: soundwire-controller@3250000 {
@@ -2259,6 +2261,8 @@
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <0>;
+
+			status = "disabled";
 		};
 
 		audiocc: clock-controller@3300000 {

arch/arm64/boot/dts/qcom/sm8350-hdk.dts

@@ -73,7 +73,7 @@
 };
 
 &apps_rsc {
-	pm8350-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8350-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -178,7 +178,7 @@
 		};
 	};
 
-	pm8350c-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8350c-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -309,7 +309,7 @@
 				reg = <0>;
 
 				lt9611_a: endpoint {
-					remote-endpoint = <&dsi0_out>;
+					remote-endpoint = <&mdss_dsi0_out>;
 				};
 			};
 
@@ -723,15 +723,15 @@
 	};
 
 	lt9611_state: lt9611-state {
-		rst {
+		rst-pins {
 			pins = "gpio48";
-			function = "normal";
+			function = "gpio";
 
 			output-high;
 			input-disable;
 		};
 
-		irq {
+		irq-pins {
 			pins = "gpio50";
 			function = "gpio";
 			bias-disable;

arch/arm64/boot/dts/qcom/sm8350-microsoft-surface-duo2.dts

@@ -44,7 +44,7 @@
 };
 
 &apps_rsc {
-	pm8350-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8350-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -135,7 +135,7 @@
 		};
 	};
 
-	pm8350c-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8350c-rpmh-regulators";
 		qcom,pmic-id = "c";
 

arch/arm64/boot/dts/qcom/sm8350-mtp.dts

@@ -43,7 +43,7 @@
 };
 
 &apps_rsc {
-	pm8350-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8350-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -134,7 +134,7 @@
 		};
 	};
 
-	pm8350c-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8350c-rpmh-regulators";
 		qcom,pmic-id = "c";
 

arch/arm64/boot/dts/qcom/sm8350.dtsi

@@ -1031,8 +1031,6 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SM8350_CX>;
 				operating-points-v2 = <&qup_opp_table_100mhz>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -2549,8 +2547,8 @@
 				 <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "iface", "core", "xo";
 			resets = <&gcc GCC_SDCC2_BCR>;
-			interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
+			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
-					<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
+					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
 			interconnect-names = "sdhc-ddr","cpu-sdhc";
 			iommus = <&apps_smmu 0x4a0 0x0>;
 			power-domains = <&rpmhpd SM8350_CX>;
@@ -2876,14 +2874,21 @@
 					port@0 {
 						reg = <0>;
 						dpu_intf1_out: endpoint {
-							remote-endpoint = <&dsi0_in>;
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf2_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
 						};
 					};
 				};
 			};
 
 			mdss_dsi0: dsi@ae94000 {
-				compatible = "qcom,mdss-dsi-ctrl";
+				compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
 				reg-names = "dsi_ctrl";
 
@@ -2913,6 +2918,9 @@
 
 				phys = <&mdss_dsi0_phy>;
 
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				status = "disabled";
 
 				dsi0_opp_table: opp-table {
@@ -2945,24 +2953,24 @@
 
 					port@0 {
 						reg = <0>;
-						dsi0_in: endpoint {
+						mdss_dsi0_in: endpoint {
 							remote-endpoint = <&dpu_intf1_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi0_out: endpoint {
+						mdss_dsi0_out: endpoint {
 						};
 					};
 				};
 			};
 
 			mdss_dsi0_phy: phy@ae94400 {
-				compatible = "qcom,dsi-phy-5nm-8350";
+				compatible = "qcom,sm8350-dsi-phy-5nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
-				      <0 0x0ae94900 0 0x260>;
+				      <0 0x0ae94900 0 0x27c>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
@@ -2978,12 +2986,12 @@
 			};
 
 			mdss_dsi1: dsi@ae96000 {
-				compatible = "qcom,mdss-dsi-ctrl";
+				compatible = "qcom,sm8350-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae96000 0 0x400>;
 				reg-names = "dsi_ctrl";
 
 				interrupt-parent = <&mdss>;
-				interrupts = <4>;
+				interrupts = <5>;
 
 				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
 					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
@@ -3008,6 +3016,9 @@
 
 				phys = <&mdss_dsi1_phy>;
 
+				#address-cells = <1>;
+				#size-cells = <0>;
+
 				status = "disabled";
 
 				dsi1_opp_table: opp-table {
@@ -3040,23 +3051,24 @@
 
 					port@0 {
 						reg = <0>;
-						dsi1_in: endpoint {
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf2_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dsi1_out: endpoint {
+						mdss_dsi1_out: endpoint {
 						};
 					};
 				};
 			};
 
 			mdss_dsi1_phy: phy@ae96400 {
-				compatible = "qcom,dsi-phy-5nm-8350";
+				compatible = "qcom,sm8350-dsi-phy-5nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
-				      <0 0x0ae96900 0 0x260>;
+				      <0 0x0ae96900 0 0x27c>;
 				reg-names = "dsi_phy",
 					    "dsi_phy_lane",
 					    "dsi_pll";
@@ -3077,7 +3089,7 @@
 			reg = <0 0x0af00000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
-				 <0>, <0>,
+				 <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
 				 <0>,
 				 <0>;
 			clock-names = "bi_tcxo",

arch/arm64/boot/dts/qcom/sm8450-hdk.dts

@@ -99,7 +99,7 @@
 };
 
 &apps_rsc {
-	pm8350-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8350-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -190,7 +190,7 @@
 		};
 	};
 
-	pm8350c-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8350c-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -303,7 +303,7 @@
 		};
 	};
 
-	pm8450-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8450-rpmh-regulators";
 		qcom,pmic-id = "h";
 
@@ -346,7 +346,7 @@
 
 	};
 
-	pmr735a-rpmh-regulators {
+	regulators-3 {
 		compatible = "qcom,pmr735a-rpmh-regulators";
 		qcom,pmic-id = "e";
 

arch/arm64/boot/dts/qcom/sm8450-qrd.dts

@@ -39,7 +39,7 @@
 };
 
 &apps_rsc {
-	pm8350-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8350-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -130,7 +130,7 @@
 		};
 	};
 
-	pm8350c-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8350c-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -242,7 +242,7 @@
 		};
 	};
 
-	pm8450-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8450-rpmh-regulators";
 		qcom,pmic-id = "h";
 
@@ -285,7 +285,7 @@
 
 	};
 
-	pmr735a-rpmh-regulators {
+	regulators-3 {
 		compatible = "qcom,pmr735a-rpmh-regulators";
 		qcom,pmic-id = "e";
 

arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi

@@ -116,7 +116,7 @@
 };
 
 &apps_rsc {
-	pm8350-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8350-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -212,7 +212,7 @@
 		};
 	};
 
-	pm8350c-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pm8350c-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -348,7 +348,7 @@
 		};
 	};
 
-	pm8450-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8450-rpmh-regulators";
 		qcom,pmic-id = "h";
 
@@ -392,7 +392,7 @@
 		};
 	};
 
-	pmr735a-rpmh-regulators {
+	regulators-3 {
 		compatible = "qcom,pmr735a-rpmh-regulators";
 		qcom,pmic-id = "e";
 
@@ -694,17 +694,17 @@
 };
 
 &remoteproc_adsp {
-	firmware-name = "qcom/sm8350/Sony/nagara/adsp.mbn";
+	firmware-name = "qcom/sm8450/Sony/nagara/adsp.mbn";
 	status = "okay";
 };
 
 &remoteproc_cdsp {
-	firmware-name = "qcom/sm8350/Sony/nagara/cdsp.mbn";
+	firmware-name = "qcom/sm8450/Sony/nagara/cdsp.mbn";
 	status = "okay";
 };
 
 &remoteproc_slpi {
-	firmware-name = "qcom/sm8350/Sony/nagara/slpi.mbn";
+	firmware-name = "qcom/sm8450/Sony/nagara/slpi.mbn";
 	status = "okay";
 };
 

arch/arm64/boot/dts/qcom/sm8450.dtsi

@@ -1017,8 +1017,6 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart20_default>;
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 
@@ -1411,8 +1409,6 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 		};
@@ -2873,7 +2869,7 @@
 			};
 
 			mdss_dsi0_phy: phy@ae94400 {
-				compatible = "qcom,dsi-phy-5nm-8450";
+				compatible = "qcom,sm8450-dsi-phy-5nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
 				      <0 0x0ae94900 0 0x260>;
@@ -2946,7 +2942,7 @@
 			};
 
 			mdss_dsi1_phy: phy@ae96400 {
-				compatible = "qcom,dsi-phy-5nm-8450";
+				compatible = "qcom,sm8450-dsi-phy-5nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
 				      <0 0x0ae96900 0 0x260>;

arch/arm64/boot/dts/qcom/sm8550-mtp.dts

@@ -47,7 +47,7 @@
 		vdd-bob2-supply = <&vph_pwr>;
 		vdd-l2-l13-l14-supply = <&vreg_bob1>;
 		vdd-l3-supply = <&vreg_s4g_1p3>;
-		vdd-l6-l16-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
 		vdd-l6-l7-supply = <&vreg_bob1>;
 		vdd-l8-l9-supply = <&vreg_bob1>;
 		vdd-l11-supply = <&vreg_s4g_1p3>;

arch/arm64/boot/dts/qcom/sm8550.dtsi

@@ -13,7 +13,9 @@
 #include <dt-bindings/interconnect/qcom,sm8550-rpmh.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
 #include <dt-bindings/phy/phy-qcom-qmp.h>
 #include <dt-bindings/thermal/thermal.h>
 
@@ -1582,8 +1584,6 @@
 				interconnect-names = "qup-core", "qup-config";
 				interconnects =	<&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 				status = "disabled";
 			};
 		};
@@ -1996,6 +1996,19 @@
 			};
 		};
 
+		lpass_tlmm: pinctrl@6e80000 {
+			compatible = "qcom,sm8550-lpass-lpi-pinctrl";
+			reg = <0 0x06e80000 0 0x20000>,
+			      <0 0x0725a000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 23>;
+
+			clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+			clock-names = "core", "audio";
+		};
+
 		lpass_lpiaon_noc: interconnect@7400000 {
 			compatible = "qcom,sm8550-lpass-lpiaon-noc";
 			reg = <0 0x07400000 0 0x19080>;
@@ -2175,7 +2188,7 @@
 			};
 
 			mdss_dsi0: dsi@ae94000 {
-				compatible = "qcom,mdss-dsi-ctrl";
+				compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
 				reg-names = "dsi_ctrl";
 
@@ -2269,7 +2282,7 @@
 			};
 
 			mdss_dsi1: dsi@ae96000 {
-				compatible = "qcom,mdss-dsi-ctrl";
+				compatible = "qcom,sm8550-dsi-ctrl", "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae96000 0 0x400>;
 				reg-names = "dsi_ctrl";
 
@@ -2395,8 +2408,8 @@
 
 			power-domains = <&gcc USB3_PHY_GDSC>;
 
-			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
 			#clock-cells = <1>;
@@ -2503,7 +2516,7 @@
 			#thermal-sensor-cells = <1>;
 		};
 
-		aoss_qmp: power-controller@c300000 {
+		aoss_qmp: power-management@c300000 {
 			compatible = "qcom,sm8550-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x400>;
 			interrupt-parent = <&ipcc>;
@@ -3055,7 +3068,7 @@
 		};
 
 		apps_smmu: iommu@15000000 {
-			compatible = "qcom,smmu-500", "arm,mmu-500";
+			compatible = "qcom,sm8550-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x100000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
@@ -3513,6 +3526,46 @@
 							 <&apps_smmu 0x1067 0x0>;
 					};
 				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x1001 0x80>,
+								 <&apps_smmu 0x1061 0x0>;
+						};
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
 			};
 		};
 

drivers/interconnect/qcom/Kconfig

@@ -69,6 +69,15 @@ config INTERCONNECT_QCOM_QCS404
 	  This is a driver for the Qualcomm Network-on-Chip on qcs404-based
 	  platforms.
 
+config INTERCONNECT_QCOM_QDU1000
+	tristate "Qualcomm QDU1000/QRU1000 interconnect driver"
+	depends on INTERCONNECT_QCOM_RPMH_POSSIBLE
+	select INTERCONNECT_QCOM_RPMH
+	select INTERCONNECT_QCOM_BCM_VOTER
+	help
+	  This is a driver for the Qualcomm Network-on-Chip on QDU1000-based
+	  and QRU1000-based platforms.
+
 config INTERCONNECT_QCOM_RPMH_POSSIBLE
 	tristate
 	default INTERCONNECT_QCOM

drivers/interconnect/qcom/Makefile

@@ -11,6 +11,7 @@ qnoc-msm8996-objs			:= msm8996.o
 icc-osm-l3-objs				:= osm-l3.o
 qnoc-qcm2290-objs			:= qcm2290.o
 qnoc-qcs404-objs			:= qcs404.o
+qnoc-qdu1000-objs			:= qdu1000.o
 icc-rpmh-obj				:= icc-rpmh.o
 qnoc-sc7180-objs			:= sc7180.o
 qnoc-sc7280-objs                        := sc7280.o
@@ -36,6 +37,7 @@ obj-$(CONFIG_INTERCONNECT_QCOM_MSM8996) += qnoc-msm8996.o
 obj-$(CONFIG_INTERCONNECT_QCOM_OSM_L3) += icc-osm-l3.o
 obj-$(CONFIG_INTERCONNECT_QCOM_QCM2290) += qnoc-qcm2290.o
 obj-$(CONFIG_INTERCONNECT_QCOM_QCS404) += qnoc-qcs404.o
+obj-$(CONFIG_INTERCONNECT_QCOM_QDU1000) += qnoc-qdu1000.o
 obj-$(CONFIG_INTERCONNECT_QCOM_RPMH) += icc-rpmh.o
 obj-$(CONFIG_INTERCONNECT_QCOM_SC7180) += qnoc-sc7180.o
 obj-$(CONFIG_INTERCONNECT_QCOM_SC7280) += qnoc-sc7280.o

drivers/interconnect/qcom/qdu1000.h

@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_QDU1000_H
+#define __DRIVERS_INTERCONNECT_QCOM_QDU1000_H
+
+#define QDU1000_MASTER_SYS_TCU				0
+#define QDU1000_MASTER_APPSS_PROC			1
+#define QDU1000_MASTER_LLCC				2
+#define QDU1000_MASTER_GIC_AHB				3
+#define QDU1000_MASTER_QDSS_BAM				4
+#define QDU1000_MASTER_QPIC				5
+#define QDU1000_MASTER_QSPI_0				6
+#define QDU1000_MASTER_QUP_0				7
+#define QDU1000_MASTER_QUP_1				8
+#define QDU1000_MASTER_SNOC_CFG				9
+#define QDU1000_MASTER_ANOC_SNOC			10
+#define QDU1000_MASTER_ANOC_GSI				11
+#define QDU1000_MASTER_GEMNOC_ECPRI_DMA			12
+#define QDU1000_MASTER_FEC_2_GEMNOC			13
+#define QDU1000_MASTER_GEM_NOC_CNOC			14
+#define QDU1000_MASTER_GEMNOC_MODEM_CNOC		15
+#define QDU1000_MASTER_GEM_NOC_PCIE_SNOC		16
+#define QDU1000_MASTER_ANOC_PCIE_GEM_NOC		17
+#define QDU1000_MASTER_SNOC_GC_MEM_NOC			18
+#define QDU1000_MASTER_SNOC_SF_MEM_NOC			19
+#define QDU1000_MASTER_QUP_CORE_0			20
+#define QDU1000_MASTER_QUP_CORE_1			21
+#define QDU1000_MASTER_CRYPTO				22
+#define QDU1000_MASTER_ECPRI_GSI			23
+#define QDU1000_MASTER_MSS_PROC				24
+#define QDU1000_MASTER_PIMEM				25
+#define QDU1000_MASTER_SNOC_ECPRI_DMA			26
+#define QDU1000_MASTER_GIC				27
+#define QDU1000_MASTER_PCIE				28
+#define QDU1000_MASTER_QDSS_ETR				29
+#define QDU1000_MASTER_QDSS_ETR_1			30
+#define QDU1000_MASTER_SDCC_1				31
+#define QDU1000_MASTER_USB3				32
+#define QDU1000_SLAVE_EBI1				512
+#define QDU1000_SLAVE_AHB2PHY_SOUTH			513
+#define QDU1000_SLAVE_AHB2PHY_NORTH			514
+#define QDU1000_SLAVE_AHB2PHY_EAST			515
+#define QDU1000_SLAVE_AOSS				516
+#define QDU1000_SLAVE_CLK_CTL				517
+#define QDU1000_SLAVE_RBCPR_CX_CFG			518
+#define QDU1000_SLAVE_RBCPR_MX_CFG			519
+#define QDU1000_SLAVE_CRYPTO_0_CFG			520
+#define QDU1000_SLAVE_ECPRI_CFG				521
+#define QDU1000_SLAVE_IMEM_CFG				522
+#define QDU1000_SLAVE_IPC_ROUTER_CFG			523
+#define QDU1000_SLAVE_CNOC_MSS				524
+#define QDU1000_SLAVE_PCIE_CFG				525
+#define QDU1000_SLAVE_PDM				526
+#define QDU1000_SLAVE_PIMEM_CFG				527
+#define QDU1000_SLAVE_PRNG				528
+#define QDU1000_SLAVE_QDSS_CFG				529
+#define QDU1000_SLAVE_QPIC				530
+#define QDU1000_SLAVE_QSPI_0				531
+#define QDU1000_SLAVE_QUP_0				532
+#define QDU1000_SLAVE_QUP_1				533
+#define QDU1000_SLAVE_SDCC_2				534
+#define QDU1000_SLAVE_SMBUS_CFG				535
+#define QDU1000_SLAVE_SNOC_CFG				536
+#define QDU1000_SLAVE_TCSR				537
+#define QDU1000_SLAVE_TLMM				538
+#define QDU1000_SLAVE_TME_CFG				539
+#define QDU1000_SLAVE_TSC_CFG				540
+#define QDU1000_SLAVE_USB3_0				541
+#define QDU1000_SLAVE_VSENSE_CTRL_CFG			542
+#define QDU1000_SLAVE_A1NOC_SNOC			543
+#define QDU1000_SLAVE_ANOC_SNOC_GSI			544
+#define QDU1000_SLAVE_DDRSS_CFG				545
+#define QDU1000_SLAVE_ECPRI_GEMNOC			546
+#define QDU1000_SLAVE_GEM_NOC_CNOC			547
+#define QDU1000_SLAVE_SNOC_GEM_NOC_GC			548
+#define QDU1000_SLAVE_SNOC_GEM_NOC_SF			549
+#define QDU1000_SLAVE_LLCC				550
+#define QDU1000_SLAVE_MODEM_OFFLINE			551
+#define QDU1000_SLAVE_GEMNOC_MODEM_CNOC			552
+#define QDU1000_SLAVE_MEM_NOC_PCIE_SNOC			553
+#define QDU1000_SLAVE_ANOC_PCIE_GEM_NOC			554
+#define QDU1000_SLAVE_QUP_CORE_0			555
+#define QDU1000_SLAVE_QUP_CORE_1			556
+#define QDU1000_SLAVE_IMEM				557
+#define QDU1000_SLAVE_PIMEM				558
+#define QDU1000_SLAVE_SERVICE_SNOC			559
+#define QDU1000_SLAVE_ETHERNET_SS			560
+#define QDU1000_SLAVE_PCIE_0				561
+#define QDU1000_SLAVE_QDSS_STM				562
+#define QDU1000_SLAVE_TCU				563
+
+#endif

include/dt-bindings/clock/qcom,qdu1000-gcc.h

@@ -0,0 +1,175 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (c) 2021-2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GCC_QDU1000_H
+#define _DT_BINDINGS_CLK_QCOM_GCC_QDU1000_H
+
+/* GCC clocks */
+#define GCC_GPLL0					0
+#define GCC_GPLL0_OUT_EVEN				1
+#define GCC_GPLL1					2
+#define GCC_GPLL2					3
+#define GCC_GPLL2_OUT_EVEN				4
+#define GCC_GPLL3					5
+#define GCC_GPLL4					6
+#define GCC_GPLL5					7
+#define GCC_GPLL5_OUT_EVEN				8
+#define GCC_GPLL6					9
+#define GCC_GPLL7					10
+#define GCC_GPLL8					11
+#define GCC_AGGRE_NOC_ECPRI_DMA_CLK			12
+#define GCC_AGGRE_NOC_ECPRI_DMA_CLK_SRC			13
+#define GCC_AGGRE_NOC_ECPRI_GSI_CLK_SRC			14
+#define GCC_BOOT_ROM_AHB_CLK				15
+#define GCC_CFG_NOC_ECPRI_CC_AHB_CLK			16
+#define GCC_CFG_NOC_USB3_PRIM_AXI_CLK			17
+#define GCC_DDRSS_ECPRI_DMA_CLK				18
+#define GCC_ECPRI_AHB_CLK				19
+#define GCC_ECPRI_CC_GPLL0_CLK_SRC			20
+#define GCC_ECPRI_CC_GPLL1_EVEN_CLK_SRC			21
+#define GCC_ECPRI_CC_GPLL2_EVEN_CLK_SRC			22
+#define GCC_ECPRI_CC_GPLL3_CLK_SRC			23
+#define GCC_ECPRI_CC_GPLL4_CLK_SRC			24
+#define GCC_ECPRI_CC_GPLL5_EVEN_CLK_SRC			25
+#define GCC_ECPRI_XO_CLK				26
+#define GCC_ETH_DBG_SNOC_AXI_CLK			27
+#define GCC_GEMNOC_PCIE_QX_CLK				28
+#define GCC_GP1_CLK					29
+#define GCC_GP1_CLK_SRC					30
+#define GCC_GP2_CLK					31
+#define GCC_GP2_CLK_SRC					32
+#define GCC_GP3_CLK					33
+#define GCC_GP3_CLK_SRC					34
+#define GCC_PCIE_0_AUX_CLK				35
+#define GCC_PCIE_0_AUX_CLK_SRC				36
+#define GCC_PCIE_0_CFG_AHB_CLK				37
+#define GCC_PCIE_0_CLKREF_EN				38
+#define GCC_PCIE_0_MSTR_AXI_CLK				39
+#define GCC_PCIE_0_PHY_AUX_CLK				40
+#define GCC_PCIE_0_PHY_RCHNG_CLK			41
+#define GCC_PCIE_0_PHY_RCHNG_CLK_SRC			42
+#define GCC_PCIE_0_PIPE_CLK				43
+#define GCC_PCIE_0_SLV_AXI_CLK				44
+#define GCC_PCIE_0_SLV_Q2A_AXI_CLK			45
+#define GCC_PDM2_CLK					46
+#define GCC_PDM2_CLK_SRC				47
+#define GCC_PDM_AHB_CLK					48
+#define GCC_PDM_XO4_CLK					49
+#define GCC_QMIP_ANOC_PCIE_CLK				50
+#define GCC_QMIP_ECPRI_DMA0_CLK				51
+#define GCC_QMIP_ECPRI_DMA1_CLK				52
+#define GCC_QMIP_ECPRI_GSI_CLK				53
+#define GCC_QUPV3_WRAP0_CORE_2X_CLK			54
+#define GCC_QUPV3_WRAP0_CORE_CLK			55
+#define GCC_QUPV3_WRAP0_S0_CLK				56
+#define GCC_QUPV3_WRAP0_S0_CLK_SRC			57
+#define GCC_QUPV3_WRAP0_S1_CLK				58
+#define GCC_QUPV3_WRAP0_S1_CLK_SRC			59
+#define GCC_QUPV3_WRAP0_S2_CLK				60
+#define GCC_QUPV3_WRAP0_S2_CLK_SRC			61
+#define GCC_QUPV3_WRAP0_S3_CLK				62
+#define GCC_QUPV3_WRAP0_S3_CLK_SRC			63
+#define GCC_QUPV3_WRAP0_S4_CLK				64
+#define GCC_QUPV3_WRAP0_S4_CLK_SRC			65
+#define GCC_QUPV3_WRAP0_S5_CLK				66
+#define GCC_QUPV3_WRAP0_S5_CLK_SRC			67
+#define GCC_QUPV3_WRAP0_S6_CLK				68
+#define GCC_QUPV3_WRAP0_S6_CLK_SRC			69
+#define GCC_QUPV3_WRAP0_S7_CLK				70
+#define GCC_QUPV3_WRAP0_S7_CLK_SRC			71
+#define GCC_QUPV3_WRAP1_CORE_2X_CLK			72
+#define GCC_QUPV3_WRAP1_CORE_CLK			73
+#define GCC_QUPV3_WRAP1_S0_CLK				74
+#define GCC_QUPV3_WRAP1_S0_CLK_SRC			75
+#define GCC_QUPV3_WRAP1_S1_CLK				76
+#define GCC_QUPV3_WRAP1_S1_CLK_SRC			77
+#define GCC_QUPV3_WRAP1_S2_CLK				78
+#define GCC_QUPV3_WRAP1_S2_CLK_SRC			79
+#define GCC_QUPV3_WRAP1_S3_CLK				80
+#define GCC_QUPV3_WRAP1_S3_CLK_SRC			81
+#define GCC_QUPV3_WRAP1_S4_CLK				82
+#define GCC_QUPV3_WRAP1_S4_CLK_SRC			83
+#define GCC_QUPV3_WRAP1_S5_CLK				84
+#define GCC_QUPV3_WRAP1_S5_CLK_SRC			85
+#define GCC_QUPV3_WRAP1_S6_CLK				86
+#define GCC_QUPV3_WRAP1_S6_CLK_SRC			87
+#define GCC_QUPV3_WRAP1_S7_CLK				88
+#define GCC_QUPV3_WRAP1_S7_CLK_SRC			89
+#define GCC_QUPV3_WRAP_0_M_AHB_CLK			90
+#define GCC_QUPV3_WRAP_0_S_AHB_CLK			91
+#define GCC_QUPV3_WRAP_1_M_AHB_CLK			92
+#define GCC_QUPV3_WRAP_1_S_AHB_CLK			93
+#define GCC_SDCC5_AHB_CLK				94
+#define GCC_SDCC5_APPS_CLK				95
+#define GCC_SDCC5_APPS_CLK_SRC				96
+#define GCC_SDCC5_ICE_CORE_CLK				97
+#define GCC_SDCC5_ICE_CORE_CLK_SRC			98
+#define GCC_SNOC_CNOC_GEMNOC_PCIE_QX_CLK		99
+#define GCC_SNOC_CNOC_GEMNOC_PCIE_SOUTH_QX_CLK		100
+#define GCC_SNOC_CNOC_PCIE_QX_CLK			101
+#define GCC_SNOC_PCIE_SF_CENTER_QX_CLK			102
+#define GCC_SNOC_PCIE_SF_SOUTH_QX_CLK			103
+#define GCC_TSC_CFG_AHB_CLK				104
+#define GCC_TSC_CLK_SRC					105
+#define GCC_TSC_CNTR_CLK				106
+#define GCC_TSC_ETU_CLK					107
+#define GCC_USB2_CLKREF_EN				108
+#define GCC_USB30_PRIM_MASTER_CLK			109
+#define GCC_USB30_PRIM_MASTER_CLK_SRC			110
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK			111
+#define GCC_USB30_PRIM_MOCK_UTMI_CLK_SRC		112
+#define GCC_USB30_PRIM_MOCK_UTMI_POSTDIV_CLK_SRC	113
+#define GCC_USB30_PRIM_SLEEP_CLK			114
+#define GCC_USB3_PRIM_PHY_AUX_CLK			115
+#define GCC_USB3_PRIM_PHY_AUX_CLK_SRC			116
+#define GCC_USB3_PRIM_PHY_COM_AUX_CLK			117
+#define GCC_USB3_PRIM_PHY_PIPE_CLK			118
+#define GCC_SM_BUS_AHB_CLK				119
+#define GCC_SM_BUS_XO_CLK				120
+#define GCC_SM_BUS_XO_CLK_SRC				121
+#define GCC_USB3_PRIM_PHY_PIPE_CLK_SRC			122
+#define GCC_ETH_100G_C2C_HM_APB_CLK			123
+#define GCC_ETH_100G_FH_HM_APB_0_CLK			124
+#define GCC_ETH_100G_FH_HM_APB_1_CLK			125
+#define GCC_ETH_100G_FH_HM_APB_2_CLK			126
+#define GCC_ETH_DBG_C2C_HM_APB_CLK			127
+#define GCC_AGGRE_NOC_ECPRI_GSI_CLK			128
+#define GCC_PCIE_0_PIPE_CLK_SRC				129
+#define GCC_PCIE_0_PHY_AUX_CLK_SRC			130
+
+/* GCC resets */
+#define GCC_ECPRI_CC_BCR				0
+#define GCC_ECPRI_SS_BCR				1
+#define GCC_ETH_WRAPPER_BCR				2
+#define GCC_PCIE_0_BCR					3
+#define GCC_PCIE_0_LINK_DOWN_BCR			4
+#define GCC_PCIE_0_NOCSR_COM_PHY_BCR			5
+#define GCC_PCIE_0_PHY_BCR				6
+#define GCC_PCIE_0_PHY_NOCSR_COM_PHY_BCR		7
+#define GCC_PCIE_PHY_CFG_AHB_BCR			8
+#define GCC_PCIE_PHY_COM_BCR				9
+#define GCC_PDM_BCR					10
+#define GCC_QUPV3_WRAPPER_0_BCR				11
+#define GCC_QUPV3_WRAPPER_1_BCR				12
+#define GCC_QUSB2PHY_PRIM_BCR				13
+#define GCC_QUSB2PHY_SEC_BCR				14
+#define GCC_SDCC5_BCR					15
+#define GCC_TCSR_PCIE_BCR				16
+#define GCC_TSC_BCR					17
+#define GCC_USB30_PRIM_BCR				18
+#define GCC_USB3_DP_PHY_PRIM_BCR			19
+#define GCC_USB3_DP_PHY_SEC_BCR				20
+#define GCC_USB3_PHY_PRIM_BCR				21
+#define GCC_USB3_PHY_SEC_BCR				22
+#define GCC_USB3PHY_PHY_PRIM_BCR			23
+#define GCC_USB3PHY_PHY_SEC_BCR				24
+#define GCC_USB_PHY_CFG_AHB2PHY_BCR			25
+
+/* GCC power domains */
+#define PCIE_0_GDSC					0
+#define PCIE_0_PHY_GDSC					1
+#define USB30_PRIM_GDSC					2
+
+#endif

include/dt-bindings/clock/qcom,sm6350-camcc.h

@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_CAMCC_SM6350_H
+#define _DT_BINDINGS_CLK_QCOM_CAMCC_SM6350_H
+
+/* CAMCC clocks */
+#define CAMCC_PLL2_OUT_EARLY		0
+#define CAMCC_PLL0			1
+#define CAMCC_PLL0_OUT_EVEN		2
+#define CAMCC_PLL1			3
+#define CAMCC_PLL1_OUT_EVEN		4
+#define CAMCC_PLL2			5
+#define CAMCC_PLL2_OUT_MAIN		6
+#define CAMCC_PLL3			7
+#define CAMCC_BPS_AHB_CLK		8
+#define CAMCC_BPS_AREG_CLK		9
+#define CAMCC_BPS_AXI_CLK		10
+#define CAMCC_BPS_CLK			11
+#define CAMCC_BPS_CLK_SRC		12
+#define CAMCC_CAMNOC_ATB_CLK		13
+#define CAMCC_CAMNOC_AXI_CLK		14
+#define CAMCC_CCI_0_CLK		15
+#define CAMCC_CCI_0_CLK_SRC		16
+#define CAMCC_CCI_1_CLK		17
+#define CAMCC_CCI_1_CLK_SRC		18
+#define CAMCC_CORE_AHB_CLK		19
+#define CAMCC_CPAS_AHB_CLK		20
+#define CAMCC_CPHY_RX_CLK_SRC		21
+#define CAMCC_CSI0PHYTIMER_CLK		22
+#define CAMCC_CSI0PHYTIMER_CLK_SRC	23
+#define CAMCC_CSI1PHYTIMER_CLK		24
+#define CAMCC_CSI1PHYTIMER_CLK_SRC	25
+#define CAMCC_CSI2PHYTIMER_CLK		26
+#define CAMCC_CSI2PHYTIMER_CLK_SRC	27
+#define CAMCC_CSI3PHYTIMER_CLK		28
+#define CAMCC_CSI3PHYTIMER_CLK_SRC	29
+#define CAMCC_CSIPHY0_CLK		30
+#define CAMCC_CSIPHY1_CLK		31
+#define CAMCC_CSIPHY2_CLK		32
+#define CAMCC_CSIPHY3_CLK		33
+#define CAMCC_FAST_AHB_CLK_SRC		34
+#define CAMCC_ICP_APB_CLK		35
+#define CAMCC_ICP_ATB_CLK		36
+#define CAMCC_ICP_CLK			37
+#define CAMCC_ICP_CLK_SRC		38
+#define CAMCC_ICP_CTI_CLK		39
+#define CAMCC_ICP_TS_CLK		40
+#define CAMCC_IFE_0_AXI_CLK		41
+#define CAMCC_IFE_0_CLK		42
+#define CAMCC_IFE_0_CLK_SRC		43
+#define CAMCC_IFE_0_CPHY_RX_CLK	44
+#define CAMCC_IFE_0_CSID_CLK		45
+#define CAMCC_IFE_0_CSID_CLK_SRC	46
+#define CAMCC_IFE_0_DSP_CLK		47
+#define CAMCC_IFE_1_AXI_CLK		48
+#define CAMCC_IFE_1_CLK		49
+#define CAMCC_IFE_1_CLK_SRC		50
+#define CAMCC_IFE_1_CPHY_RX_CLK	51
+#define CAMCC_IFE_1_CSID_CLK		52
+#define CAMCC_IFE_1_CSID_CLK_SRC	53
+#define CAMCC_IFE_1_DSP_CLK		54
+#define CAMCC_IFE_2_AXI_CLK		55
+#define CAMCC_IFE_2_CLK		56
+#define CAMCC_IFE_2_CLK_SRC		57
+#define CAMCC_IFE_2_CPHY_RX_CLK	58
+#define CAMCC_IFE_2_CSID_CLK		59
+#define CAMCC_IFE_2_CSID_CLK_SRC	60
+#define CAMCC_IFE_2_DSP_CLK		61
+#define CAMCC_IFE_LITE_CLK		62
+#define CAMCC_IFE_LITE_CLK_SRC		63
+#define CAMCC_IFE_LITE_CPHY_RX_CLK	64
+#define CAMCC_IFE_LITE_CSID_CLK	65
+#define CAMCC_IFE_LITE_CSID_CLK_SRC	66
+#define CAMCC_IPE_0_AHB_CLK		67
+#define CAMCC_IPE_0_AREG_CLK		68
+#define CAMCC_IPE_0_AXI_CLK		69
+#define CAMCC_IPE_0_CLK		70
+#define CAMCC_IPE_0_CLK_SRC		71
+#define CAMCC_JPEG_CLK			72
+#define CAMCC_JPEG_CLK_SRC		73
+#define CAMCC_LRME_CLK			74
+#define CAMCC_LRME_CLK_SRC		75
+#define CAMCC_MCLK0_CLK		76
+#define CAMCC_MCLK0_CLK_SRC		77
+#define CAMCC_MCLK1_CLK		78
+#define CAMCC_MCLK1_CLK_SRC		79
+#define CAMCC_MCLK2_CLK		80
+#define CAMCC_MCLK2_CLK_SRC		81
+#define CAMCC_MCLK3_CLK		82
+#define CAMCC_MCLK3_CLK_SRC		83
+#define CAMCC_MCLK4_CLK		84
+#define CAMCC_MCLK4_CLK_SRC		85
+#define CAMCC_SLOW_AHB_CLK_SRC		86
+#define CAMCC_SOC_AHB_CLK		87
+#define CAMCC_SYS_TMR_CLK		88
+
+/* GDSCs */
+#define BPS_GDSC			0
+#define IPE_0_GDSC			1
+#define IFE_0_GDSC			2
+#define IFE_1_GDSC			3
+#define IFE_2_GDSC			4
+#define TITAN_TOP_GDSC			5
+
+#endif

include/dt-bindings/interconnect/qcom,qdu1000-rpmh.h

@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+/*
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_QDU1000_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_QDU1000_H
+
+#define MASTER_QUP_CORE_0			0
+#define MASTER_QUP_CORE_1			1
+#define SLAVE_QUP_CORE_0			2
+#define SLAVE_QUP_CORE_1			3
+
+#define MASTER_SYS_TCU				0
+#define MASTER_APPSS_PROC			1
+#define MASTER_GEMNOC_ECPRI_DMA			2
+#define MASTER_FEC_2_GEMNOC			3
+#define MASTER_ANOC_PCIE_GEM_NOC		4
+#define MASTER_SNOC_GC_MEM_NOC			5
+#define MASTER_SNOC_SF_MEM_NOC			6
+#define MASTER_MSS_PROC				7
+#define SLAVE_GEM_NOC_CNOC			8
+#define SLAVE_LLCC				9
+#define SLAVE_GEMNOC_MODEM_CNOC			10
+#define SLAVE_MEM_NOC_PCIE_SNOC			11
+
+#define MASTER_LLCC				0
+#define SLAVE_EBI1				1
+
+#define MASTER_GIC_AHB				0
+#define MASTER_QDSS_BAM				1
+#define MASTER_QPIC				2
+#define MASTER_QSPI_0				3
+#define MASTER_QUP_0				4
+#define MASTER_QUP_1				5
+#define MASTER_SNOC_CFG				6
+#define MASTER_ANOC_SNOC			7
+#define MASTER_ANOC_GSI				8
+#define MASTER_GEM_NOC_CNOC			9
+#define MASTER_GEMNOC_MODEM_CNOC		10
+#define MASTER_GEM_NOC_PCIE_SNOC		11
+#define MASTER_CRYPTO				12
+#define MASTER_ECPRI_GSI			13
+#define MASTER_PIMEM				14
+#define MASTER_SNOC_ECPRI_DMA			15
+#define MASTER_GIC				16
+#define MASTER_PCIE				17
+#define MASTER_QDSS_ETR				18
+#define MASTER_QDSS_ETR_1			19
+#define MASTER_SDCC_1				20
+#define MASTER_USB3				21
+#define SLAVE_AHB2PHY_SOUTH			22
+#define SLAVE_AHB2PHY_NORTH			23
+#define SLAVE_AHB2PHY_EAST			24
+#define SLAVE_AOSS				25
+#define SLAVE_CLK_CTL				26
+#define SLAVE_RBCPR_CX_CFG			27
+#define SLAVE_RBCPR_MX_CFG			28
+#define SLAVE_CRYPTO_0_CFG			29
+#define SLAVE_ECPRI_CFG				30
+#define SLAVE_IMEM_CFG				31
+#define SLAVE_IPC_ROUTER_CFG			32
+#define SLAVE_CNOC_MSS				33
+#define SLAVE_PCIE_CFG				34
+#define SLAVE_PDM				35
+#define SLAVE_PIMEM_CFG				36
+#define SLAVE_PRNG				37
+#define SLAVE_QDSS_CFG				38
+#define SLAVE_QPIC				40
+#define SLAVE_QSPI_0				41
+#define SLAVE_QUP_0				42
+#define SLAVE_QUP_1				43
+#define SLAVE_SDCC_2				44
+#define SLAVE_SMBUS_CFG				45
+#define SLAVE_SNOC_CFG				46
+#define SLAVE_TCSR				47
+#define SLAVE_TLMM				48
+#define SLAVE_TME_CFG				49
+#define SLAVE_TSC_CFG				50
+#define SLAVE_USB3_0				51
+#define SLAVE_VSENSE_CTRL_CFG			52
+#define SLAVE_A1NOC_SNOC			53
+#define SLAVE_ANOC_SNOC_GSI			54
+#define SLAVE_DDRSS_CFG				55
+#define SLAVE_ECPRI_GEMNOC			56
+#define SLAVE_SNOC_GEM_NOC_GC			57
+#define SLAVE_SNOC_GEM_NOC_SF			58
+#define SLAVE_MODEM_OFFLINE			59
+#define SLAVE_ANOC_PCIE_GEM_NOC			60
+#define SLAVE_IMEM				61
+#define SLAVE_PIMEM				62
+#define SLAVE_SERVICE_SNOC			63
+#define SLAVE_ETHERNET_SS			64
+#define SLAVE_PCIE_0				65
+#define SLAVE_QDSS_STM				66
+#define SLAVE_TCU				67
+
+#endif