diff --git a/Documentation/dontdiff b/Documentation/dontdiff index e1efc400bed6..bc01a5a9d663 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -68,7 +68,6 @@ autoconf.h* bbootsect bin2c binkernel.spec -binoffset bootsect bounds.h bsetup diff --git a/scripts/.gitignore b/scripts/.gitignore index 52cab46ae35a..c5d5db54c009 100644 --- a/scripts/.gitignore +++ b/scripts/.gitignore @@ -6,5 +6,4 @@ kallsyms pnmtologo bin2c unifdef -binoffset ihex2fw diff --git a/scripts/binoffset.c b/scripts/binoffset.c deleted file mode 100644 index 1a2e39b8e3e5..000000000000 --- a/scripts/binoffset.c +++ /dev/null @@ -1,163 +0,0 @@ -/*************************************************************************** - * binoffset.c - * (C) 2002 Randy Dunlap - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -# binoffset.c: -# - searches a (binary) file for a specified (binary) pattern -# - returns the offset of the located pattern or ~0 if not found -# - exits with exit status 0 normally or non-0 if pattern is not found -# or any other error occurs. - -****************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define VERSION "0.1" -#define BUF_SIZE (16 * 1024) -#define PAT_SIZE 100 - -char *progname; -char *inputname; -int inputfd; -unsigned int bix; /* buf index */ -unsigned char patterns [PAT_SIZE] = {0}; /* byte-sized pattern array */ -int pat_len; /* actual number of pattern bytes */ -unsigned char *madr; /* mmap address */ -size_t filesize; -int num_matches = 0; -off_t firstloc = 0; - -void usage (void) -{ - fprintf (stderr, "%s ver. %s\n", progname, VERSION); - fprintf (stderr, "usage: %s filename pattern_bytes\n", - progname); - fprintf (stderr, " [prints location of pattern_bytes in file]\n"); - exit (1); -} - -void get_pattern (int pat_count, char *pats []) -{ - int ix, err, tmp; - -#ifdef DEBUG - fprintf (stderr,"get_pattern: count = %d\n", pat_count); - for (ix = 0; ix < pat_count; ix++) - fprintf (stderr, " pat # %d: [%s]\n", ix, pats[ix]); -#endif - - for (ix = 0; ix < pat_count; ix++) { - tmp = 0; - err = sscanf (pats[ix], "%5i", &tmp); - if (err != 1 || tmp > 0xff) { - fprintf (stderr, "pattern or value error in pattern # %d [%s]\n", - ix, pats[ix]); - usage (); - } - patterns [ix] = tmp; - } - pat_len = pat_count; -} - -void search_pattern (void) -{ - for (bix = 0; bix < filesize; bix++) { - if (madr[bix] == patterns[0]) { - if (memcmp (&madr[bix], patterns, pat_len) == 0) { - if (num_matches == 0) - firstloc = bix; - num_matches++; - } - } - } -} - -#ifdef NOTDEF -size_t get_filesize (int fd) -{ - off_t end_off = lseek (fd, 0, SEEK_END); - lseek (fd, 0, SEEK_SET); - return (size_t) end_off; -} -#endif - -size_t get_filesize (int fd) -{ - int err; - struct stat stat; - - err = fstat (fd, &stat); - fprintf (stderr, "filesize: %ld\n", err < 0 ? (long)err : stat.st_size); - if (err < 0) - return err; - return (size_t) stat.st_size; -} - -int main (int argc, char *argv []) -{ - progname = argv[0]; - - if (argc < 3) - usage (); - - get_pattern (argc - 2, argv + 2); - - inputname = argv[1]; - - inputfd = open (inputname, O_RDONLY); - if (inputfd == -1) { - fprintf (stderr, "%s: cannot open '%s'\n", - progname, inputname); - exit (3); - } - - filesize = get_filesize (inputfd); - - madr = mmap (0, filesize, PROT_READ, MAP_PRIVATE, inputfd, 0); - if (madr == MAP_FAILED) { - fprintf (stderr, "mmap error = %d\n", errno); - close (inputfd); - exit (4); - } - - search_pattern (); - - if (munmap (madr, filesize)) - fprintf (stderr, "munmap error = %d\n", errno); - - if (close (inputfd)) - fprintf (stderr, "%s: error %d closing '%s'\n", - progname, errno, inputname); - - fprintf (stderr, "number of pattern matches = %d\n", num_matches); - if (num_matches == 0) - firstloc = ~0; - printf ("%ld\n", firstloc); - fprintf (stderr, "%ld\n", firstloc); - - exit (num_matches ? 0 : 2); -} - -/* end binoffset.c */ diff --git a/scripts/extract-ikconfig b/scripts/extract-ikconfig index de233ff43c1c..37f30d36c944 100755 --- a/scripts/extract-ikconfig +++ b/scripts/extract-ikconfig @@ -1,92 +1,53 @@ #!/bin/sh -# extracts .config info from a [b]zImage file -# uses: binoffset (new), dd, zcat, strings, grep -# $arg1 is [b]zImage filename +# ---------------------------------------------------------------------- +# extract-ikconfig - Extract the .config file from a kernel image +# +# This will only work when the kernel was compiled with CONFIG_IKCONFIG. +# +# The obscure use of the "tr" filter is to work around older versions of +# "grep" that report the byte offset of the line instead of the pattern. +# +# (c) 2009, Dick Streefland +# Licensed under the terms of the GNU General Public License. +# ---------------------------------------------------------------------- -binoffset="./scripts/binoffset" -test -e $binoffset || cc -o $binoffset ./scripts/binoffset.c || exit 1 +gz1='\037\213\010' +gz2='01' +cf1='IKCFG_ST\037\213\010' +cf2='0123456789' -IKCFG_ST="0x49 0x4b 0x43 0x46 0x47 0x5f 0x53 0x54" -IKCFG_ED="0x49 0x4b 0x43 0x46 0x47 0x5f 0x45 0x44" -dump_config() { - file="$1" - - start=`$binoffset $file $IKCFG_ST 2>/dev/null` - [ "$?" != "0" ] && start="-1" - if [ "$start" -eq "-1" ]; then - return - fi - end=`$binoffset $file $IKCFG_ED 2>/dev/null` - [ "$?" != "0" ] && end="-1" - if [ "$end" -eq "-1" ]; then - return - fi - - start=`expr $start + 8` - size=`expr $end - $start` - - dd if="$file" ibs=1 skip="$start" count="$size" 2>/dev/null | zcat - - clean_up - exit 0 -} - - -usage() +dump_config() { - echo " usage: extract-ikconfig [b]zImage_filename" -} - -clean_up() -{ - if [ "$TMPFILE" != "" ]; then - rm -f $TMPFILE + if pos=`tr "$cf1\n$cf2" "\n$cf2=" < "$1" | grep -abo "^$cf2"` + then + pos=${pos%%:*} + tail -c+$(($pos+8)) "$1" | zcat -q + exit 0 fi } -if [ $# -lt 1 ] +# Check invocation: +me=${0##*/} +img=$1 +if [ $# -ne 1 -o ! -s "$img" ] then - usage - exit 1 + echo "Usage: $me " >&2 + exit 2 fi -TMPFILE=`mktemp -t ikconfig-XXXXXX` || exit 1 -image="$1" +# Initial attempt for uncompressed images or objects: +dump_config "$img" -# vmlinux: Attempt to dump the configuration from the file directly -dump_config "$image" +# That didn't work, so decompress and try again: +tmp=/tmp/ikconfig$$ +trap "rm -f $tmp" 0 +for pos in `tr "$gz1\n$gz2" "\n$gz2=" < "$img" | grep -abo "^$gz2"` +do + pos=${pos%%:*} + tail -c+$pos "$img" | zcat 2> /dev/null > $tmp + dump_config $tmp +done -GZHDR1="0x1f 0x8b 0x08 0x00" -GZHDR2="0x1f 0x8b 0x08 0x08" - -ELFHDR="0x7f 0x45 0x4c 0x46" - -# vmlinux.gz: Check for a compressed images -off=`$binoffset "$image" $GZHDR1 2>/dev/null` -[ "$?" != "0" ] && off="-1" -if [ "$off" -eq "-1" ]; then - off=`$binoffset "$image" $GZHDR2 2>/dev/null` - [ "$?" != "0" ] && off="-1" -fi -if [ "$off" -eq "0" ]; then - zcat <"$image" >"$TMPFILE" - dump_config "$TMPFILE" -elif [ "$off" -ne "-1" ]; then - (dd ibs="$off" skip=1 count=0 && dd bs=512k) <"$image" 2>/dev/null | \ - zcat >"$TMPFILE" - dump_config "$TMPFILE" - -# check if this is simply an ELF file -else - off=`$binoffset "$image" $ELFHDR 2>/dev/null` - [ "$?" != "0" ] && off="-1" - if [ "$off" -eq "0" ]; then - dump_config "$image" - fi -fi - -echo "ERROR: Unable to extract kernel configuration information." -echo " This kernel image may not have the config info." - -clean_up +# Bail out: +echo "$me: Cannot find kernel config." >&2 exit 1