ASoC: Dynamically manage DBVDD2 and DBVDD3 on WM5100
Allow the DBVDD2 and DBVDD3 rails to be powered down when idle, helping fully power down connected devices when idle. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
parent
ab6cf13943
commit
7aefb086c1
|
@ -54,6 +54,8 @@ struct wm5100_priv {
|
|||
|
||||
struct regulator_bulk_data core_supplies[WM5100_NUM_CORE_SUPPLIES];
|
||||
struct regulator *cpvdd;
|
||||
struct regulator *dbvdd2;
|
||||
struct regulator *dbvdd3;
|
||||
|
||||
int rev;
|
||||
|
||||
|
@ -803,6 +805,52 @@ static int wm5100_cp_ev(struct snd_soc_dapm_widget *w,
|
|||
}
|
||||
}
|
||||
|
||||
static int wm5100_dbvdd_ev(struct snd_soc_dapm_widget *w,
|
||||
struct snd_kcontrol *kcontrol,
|
||||
int event)
|
||||
{
|
||||
struct snd_soc_codec *codec = w->codec;
|
||||
struct wm5100_priv *wm5100 = snd_soc_codec_get_drvdata(codec);
|
||||
struct regulator *regulator;
|
||||
int ret;
|
||||
|
||||
switch (w->shift) {
|
||||
case 2:
|
||||
regulator = wm5100->dbvdd2;
|
||||
break;
|
||||
case 3:
|
||||
regulator = wm5100->dbvdd3;
|
||||
break;
|
||||
default:
|
||||
BUG();
|
||||
return 0;
|
||||
}
|
||||
|
||||
switch (event) {
|
||||
case SND_SOC_DAPM_PRE_PMU:
|
||||
ret = regulator_enable(regulator);
|
||||
if (ret != 0) {
|
||||
dev_err(codec->dev, "Failed to enable DBVDD%d: %d\n",
|
||||
w->shift, ret);
|
||||
return ret;
|
||||
}
|
||||
return ret;
|
||||
|
||||
case SND_SOC_DAPM_POST_PMD:
|
||||
ret = regulator_disable(regulator);
|
||||
if (ret != 0) {
|
||||
dev_err(codec->dev, "Failed to enable DBVDD%d: %d\n",
|
||||
w->shift, ret);
|
||||
return ret;
|
||||
}
|
||||
return ret;
|
||||
|
||||
default:
|
||||
BUG();
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
static void wm5100_log_status3(struct snd_soc_codec *codec, int val)
|
||||
{
|
||||
if (val & WM5100_SPK_SHUTDOWN_WARN_EINT)
|
||||
|
@ -880,6 +928,10 @@ SND_SOC_DAPM_SUPPLY("CP2", WM5100_MIC_CHARGE_PUMP_1, WM5100_CP2_ENA_SHIFT, 0,
|
|||
SND_SOC_DAPM_SUPPLY("CP2 Active", WM5100_MIC_CHARGE_PUMP_1,
|
||||
WM5100_CP2_BYPASS_SHIFT, 1, wm5100_cp_ev,
|
||||
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
||||
SND_SOC_DAPM_SUPPLY("DBVDD2", SND_SOC_NOPM, 2, 0, wm5100_dbvdd_ev,
|
||||
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
||||
SND_SOC_DAPM_SUPPLY("DBVDD3", SND_SOC_NOPM, 3, 0, wm5100_dbvdd_ev,
|
||||
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
|
||||
|
||||
SND_SOC_DAPM_SUPPLY("MICBIAS1", WM5100_MIC_BIAS_CTRL_1, WM5100_MICB1_ENA_SHIFT,
|
||||
0, NULL, 0),
|
||||
|
@ -1122,10 +1174,14 @@ static const struct snd_soc_dapm_route wm5100_dapm_routes[] = {
|
|||
{ "AIF1RX8", NULL, "SYSCLK" },
|
||||
|
||||
{ "AIF2RX1", NULL, "SYSCLK" },
|
||||
{ "AIF2RX1", NULL, "DBVDD2" },
|
||||
{ "AIF2RX2", NULL, "SYSCLK" },
|
||||
{ "AIF2RX2", NULL, "DBVDD2" },
|
||||
|
||||
{ "AIF3RX1", NULL, "SYSCLK" },
|
||||
{ "AIF3RX1", NULL, "DBVDD3" },
|
||||
{ "AIF3RX2", NULL, "SYSCLK" },
|
||||
{ "AIF3RX2", NULL, "DBVDD3" },
|
||||
|
||||
{ "AIF1TX1", NULL, "SYSCLK" },
|
||||
{ "AIF1TX2", NULL, "SYSCLK" },
|
||||
|
@ -1137,10 +1193,14 @@ static const struct snd_soc_dapm_route wm5100_dapm_routes[] = {
|
|||
{ "AIF1TX8", NULL, "SYSCLK" },
|
||||
|
||||
{ "AIF2TX1", NULL, "SYSCLK" },
|
||||
{ "AIF2TX1", NULL, "DBVDD2" },
|
||||
{ "AIF2TX2", NULL, "SYSCLK" },
|
||||
{ "AIF2TX2", NULL, "DBVDD2" },
|
||||
|
||||
{ "AIF3TX1", NULL, "SYSCLK" },
|
||||
{ "AIF3TX1", NULL, "DBVDD3" },
|
||||
{ "AIF3TX2", NULL, "SYSCLK" },
|
||||
{ "AIF3TX2", NULL, "DBVDD3" },
|
||||
|
||||
{ "MICBIAS1", NULL, "CP2" },
|
||||
{ "MICBIAS2", NULL, "CP2" },
|
||||
|
@ -2250,12 +2310,26 @@ static int wm5100_probe(struct snd_soc_codec *codec)
|
|||
goto err_core;
|
||||
}
|
||||
|
||||
wm5100->dbvdd2 = regulator_get(&i2c->dev, "DBVDD2");
|
||||
if (IS_ERR(wm5100->dbvdd2)) {
|
||||
ret = PTR_ERR(wm5100->dbvdd2);
|
||||
dev_err(&i2c->dev, "Failed to get DBVDD2: %d\n", ret);
|
||||
goto err_cpvdd;
|
||||
}
|
||||
|
||||
wm5100->dbvdd3 = regulator_get(&i2c->dev, "DBVDD3");
|
||||
if (IS_ERR(wm5100->dbvdd3)) {
|
||||
ret = PTR_ERR(wm5100->dbvdd3);
|
||||
dev_err(&i2c->dev, "Failed to get DBVDD2: %d\n", ret);
|
||||
goto err_dbvdd2;
|
||||
}
|
||||
|
||||
ret = regulator_bulk_enable(ARRAY_SIZE(wm5100->core_supplies),
|
||||
wm5100->core_supplies);
|
||||
if (ret != 0) {
|
||||
dev_err(codec->dev, "Failed to enable core supplies: %d\n",
|
||||
ret);
|
||||
goto err_cpvdd;
|
||||
goto err_dbvdd3;
|
||||
}
|
||||
|
||||
if (wm5100->pdata.ldo_ena) {
|
||||
|
@ -2432,6 +2506,10 @@ err_ldo:
|
|||
err_enable:
|
||||
regulator_bulk_disable(ARRAY_SIZE(wm5100->core_supplies),
|
||||
wm5100->core_supplies);
|
||||
err_dbvdd3:
|
||||
regulator_put(wm5100->dbvdd3);
|
||||
err_dbvdd2:
|
||||
regulator_put(wm5100->dbvdd2);
|
||||
err_cpvdd:
|
||||
regulator_put(wm5100->cpvdd);
|
||||
err_core:
|
||||
|
@ -2458,6 +2536,8 @@ static int wm5100_remove(struct snd_soc_codec *codec)
|
|||
gpio_set_value_cansleep(wm5100->pdata.ldo_ena, 0);
|
||||
gpio_free(wm5100->pdata.ldo_ena);
|
||||
}
|
||||
regulator_put(wm5100->dbvdd3);
|
||||
regulator_put(wm5100->dbvdd2);
|
||||
regulator_put(wm5100->cpvdd);
|
||||
regulator_bulk_free(ARRAY_SIZE(wm5100->core_supplies),
|
||||
wm5100->core_supplies);
|
||||
|
|
Loading…
Reference in New Issue