omap3: pandora: add NAND and wifi support
Add platform data for NAND and wifi, also setup all GPIOs needed to use the wifi chip. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Grazvydas Ignotas
Tony Lindgren
parent
ad74db6041
commit
79ccf549b3
|
|
@ -25,6 +25,9 @@
|
|||
#include <linux/spi/ads7846.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/i2c/twl.h>
|
||||
#include <linux/spi/wl12xx.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/mtd/nand.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/input/matrix_keypad.h>
|
||||
|
|
@ -41,13 +44,50 @@
|
|||
#include <plat/mcspi.h>
|
||||
#include <plat/usb.h>
|
||||
#include <plat/display.h>
|
||||
#include <plat/nand.h>
|
||||
|
||||
#include "mux.h"
|
||||
#include "sdram-micron-mt46h32m32lf-6.h"
|
||||
#include "hsmmc.h"
|
||||
|
||||
#define PANDORA_WIFI_IRQ_GPIO 21
|
||||
#define PANDORA_WIFI_NRESET_GPIO 23
|
||||
#define OMAP3_PANDORA_TS_GPIO 94
|
||||
|
||||
#define NAND_BLOCK_SIZE SZ_128K
|
||||
|
||||
static struct mtd_partition omap3pandora_nand_partitions[] = {
|
||||
{
|
||||
.name = "xloader",
|
||||
.offset = 0,
|
||||
.size = 4 * NAND_BLOCK_SIZE,
|
||||
.mask_flags = MTD_WRITEABLE
|
||||
}, {
|
||||
.name = "uboot",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = 15 * NAND_BLOCK_SIZE,
|
||||
}, {
|
||||
.name = "uboot-env",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = 1 * NAND_BLOCK_SIZE,
|
||||
}, {
|
||||
.name = "boot",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = 80 * NAND_BLOCK_SIZE,
|
||||
}, {
|
||||
.name = "rootfs",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
},
|
||||
};
|
||||
|
||||
static struct omap_nand_platform_data pandora_nand_data = {
|
||||
.cs = 0,
|
||||
.devsize = 1, /* '0' for 8-bit, '1' for 16-bit device */
|
||||
.parts = omap3pandora_nand_partitions,
|
||||
.nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions),
|
||||
};
|
||||
|
||||
static struct gpio_led pandora_gpio_leds[] = {
|
||||
{
|
||||
.name = "pandora::sd1",
|
||||
|
|
@ -246,12 +286,33 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
|
|||
static int omap3pandora_twl_gpio_setup(struct device *dev,
|
||||
unsigned gpio, unsigned ngpio)
|
||||
{
|
||||
int ret, gpio_32khz;
|
||||
|
||||
/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
|
||||
omap3pandora_mmc[0].gpio_cd = gpio + 0;
|
||||
omap3pandora_mmc[1].gpio_cd = gpio + 1;
|
||||
omap2_hsmmc_init(omap3pandora_mmc);
|
||||
|
||||
/* gpio + 13 drives 32kHz buffer for wifi module */
|
||||
gpio_32khz = gpio + 13;
|
||||
ret = gpio_request(gpio_32khz, "wifi 32kHz");
|
||||
if (ret < 0) {
|
||||
pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret);
|
||||
goto fail;
|
||||
}
|
||||
|
||||
ret = gpio_direction_output(gpio_32khz, 1);
|
||||
if (ret < 0) {
|
||||
pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret);
|
||||
goto fail_direction;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
fail_direction:
|
||||
gpio_free(gpio_32khz);
|
||||
fail:
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
|
||||
|
|
@ -530,10 +591,67 @@ static void __init omap3pandora_init_irq(void)
|
|||
omap_gpio_init();
|
||||
}
|
||||
|
||||
static void pandora_wl1251_set_power(bool enable)
|
||||
{
|
||||
/*
|
||||
* Keep power always on until wl1251_sdio driver learns to re-init
|
||||
* the chip after powering it down and back up.
|
||||
*/
|
||||
}
|
||||
|
||||
static struct wl12xx_platform_data pandora_wl1251_pdata = {
|
||||
.set_power = pandora_wl1251_set_power,
|
||||
.use_eeprom = true,
|
||||
};
|
||||
|
||||
static struct platform_device pandora_wl1251_data = {
|
||||
.name = "wl1251_data",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &pandora_wl1251_pdata,
|
||||
},
|
||||
};
|
||||
|
||||
static void pandora_wl1251_init(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq");
|
||||
if (ret < 0)
|
||||
goto fail;
|
||||
|
||||
ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO);
|
||||
if (ret < 0)
|
||||
goto fail_irq;
|
||||
|
||||
pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
|
||||
if (pandora_wl1251_pdata.irq < 0)
|
||||
goto fail_irq;
|
||||
|
||||
ret = gpio_request(PANDORA_WIFI_NRESET_GPIO, "wl1251 nreset");
|
||||
if (ret < 0)
|
||||
goto fail_irq;
|
||||
|
||||
/* start powered so that it probes with MMC subsystem */
|
||||
ret = gpio_direction_output(PANDORA_WIFI_NRESET_GPIO, 1);
|
||||
if (ret < 0)
|
||||
goto fail_nreset;
|
||||
|
||||
return;
|
||||
|
||||
fail_nreset:
|
||||
gpio_free(PANDORA_WIFI_NRESET_GPIO);
|
||||
fail_irq:
|
||||
gpio_free(PANDORA_WIFI_IRQ_GPIO);
|
||||
fail:
|
||||
printk(KERN_ERR "wl1251 board initialisation failed\n");
|
||||
}
|
||||
|
||||
static struct platform_device *omap3pandora_devices[] __initdata = {
|
||||
&pandora_leds_gpio,
|
||||
&pandora_keys_gpio,
|
||||
&pandora_dss_device,
|
||||
&pandora_wl1251_data,
|
||||
};
|
||||
|
||||
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
|
||||
|
|
@ -566,6 +684,7 @@ static void __init omap3pandora_init(void)
|
|||
{
|
||||
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
|
||||
omap3pandora_i2c_init();
|
||||
pandora_wl1251_init();
|
||||
platform_add_devices(omap3pandora_devices,
|
||||
ARRAY_SIZE(omap3pandora_devices));
|
||||
omap_serial_init();
|
||||
|
|
@ -574,6 +693,7 @@ static void __init omap3pandora_init(void)
|
|||
omap3pandora_ads7846_init();
|
||||
usb_ehci_init(&ehci_pdata);
|
||||
usb_musb_init(&musb_board_data);
|
||||
gpmc_nand_init(&pandora_nand_data);
|
||||
|
||||
/* Ensure SDRC pins are mux'd for self-refresh */
|
||||
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
|
||||
|
|
|
|||
Loading…
Reference in New Issue