Merge branch 'net-selftests'

Petr Machata says:

====================
selftests: Use busywait() in a couple places

Two helper function for active waiting for an event were recently
introduced: busywait() as the active-waiting tool, and until_counter_is()
as a configurable predicate that can be plugged into busywait(). Use these
in tc_common and mlxsw's qos_defprio instead of hand-coding equivalents.

Patches #1 and #2 extend lib.sh facilities to make the transition possible.
Patch #3 converts tc_common, and patch #4 qos_defprio.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tools/testing/selftests/drivers/net/mlxsw/qos_defprio.sh

@@ -114,23 +114,12 @@ ping_ipv4()
 	ping_test $h1 192.0.2.2
 }
 
-wait_for_packets()
-{
-	local t0=$1; shift
-	local prio_observe=$1; shift
-
-	local t1=$(ethtool_stats_get $swp1 rx_frames_prio_$prio_observe)
-	local delta=$((t1 - t0))
-	echo $delta
-	((delta >= 10))
-}
-
 __test_defprio()
 {
 	local prio_install=$1; shift
 	local prio_observe=$1; shift
-	local delta
 	local key
+	local t1
 	local i
 
 	RET=0
@@ -139,9 +128,10 @@ __test_defprio()
 
 	local t0=$(ethtool_stats_get $swp1 rx_frames_prio_$prio_observe)
 	mausezahn -q $h1 -d 100m -c 10 -t arp reply
-	delta=$(busywait "$HIT_TIMEOUT" wait_for_packets $t0 $prio_observe)
+	t1=$(busywait "$HIT_TIMEOUT" until_counter_is ">= $((t0 + 10))" \
+		ethtool_stats_get $swp1 rx_frames_prio_$prio_observe)
 
-	check_err $? "Default priority $prio_install/$prio_observe: Expected to capture 10 packets, got $delta."
+	check_err $? "Default priority $prio_install/$prio_observe: Expected to capture 10 packets, got $((t1 - t0))."
 	log_test "Default priority $prio_install/$prio_observe"
 
 	defprio_uninstall $swp1 $prio_install

tools/testing/selftests/drivers/net/mlxsw/sch_red_core.sh

@@ -351,7 +351,7 @@ build_backlog()
 	local i=0
 
 	while :; do
-		local cur=$(busywait 1100 until_counter_is $((cur + 1)) \
+		local cur=$(busywait 1100 until_counter_is "> $cur" \
 					    get_qdisc_backlog $vlan)
 		local diff=$((size - cur))
 		local pkts=$(((diff + 7999) / 8000))
@@ -481,14 +481,14 @@ do_mc_backlog_test()
 	start_tcp_traffic $h1.$vlan $(ipaddr 1 $vlan) $(ipaddr 3 $vlan) bc
 	start_tcp_traffic $h2.$vlan $(ipaddr 2 $vlan) $(ipaddr 3 $vlan) bc
 
-	qbl=$(busywait 5000 until_counter_is 500000 \
+	qbl=$(busywait 5000 until_counter_is ">= 500000" \
 		       get_qdisc_backlog $vlan)
 	check_err $? "Could not build MC backlog"
 
 	# Verify that we actually see the backlog on BUM TC. Do a busywait as
 	# well, performance blips might cause false fail.
 	local ebl
-	ebl=$(busywait 5000 until_counter_is 500000 \
+	ebl=$(busywait 5000 until_counter_is ">= 500000" \
 		       get_mc_transmit_queue $vlan)
 	check_err $? "MC backlog reported by qdisc not visible in ethtool"
 

tools/testing/selftests/net/forwarding/lib.sh

@@ -277,11 +277,11 @@ wait_for_offload()
 
 until_counter_is()
 {
-	local value=$1; shift
+	local expr=$1; shift
 	local current=$("$@")
 
 	echo $((current))
-	((current >= value))
+	((current $expr))
 }
 
 busywait_for_counter()
@@ -290,7 +290,7 @@ busywait_for_counter()
 	local delta=$1; shift
 
 	local base=$("$@")
-	busywait "$timeout" until_counter_is $((base + delta)) "$@"
+	busywait "$timeout" until_counter_is ">= $((base + delta))" "$@"
 }
 
 setup_wait_dev()
@@ -626,6 +626,17 @@ tc_rule_stats_get()
 	    | jq ".[1].options.actions[].stats$selector"
 }
 
+tc_rule_handle_stats_get()
+{
+	local id=$1; shift
+	local handle=$1; shift
+	local selector=${1:-.packets}; shift
+
+	tc -j -s filter show $id \
+	    | jq ".[] | select(.options.handle == $handle) | \
+		  .options.actions[0].stats$selector"
+}
+
 ethtool_stats_get()
 {
 	local dev=$1; shift

tools/testing/selftests/net/forwarding/tc_common.sh

@@ -6,39 +6,14 @@ CHECK_TC="yes"
 # Can be overridden by the configuration file. See lib.sh
 TC_HIT_TIMEOUT=${TC_HIT_TIMEOUT:=1000} # ms
 
-__tc_check_packets()
-{
-	local id=$1
-	local handle=$2
-	local count=$3
-	local operator=$4
-
-	start_time="$(date -u +%s%3N)"
-	while true
-	do
-		cmd_jq "tc -j -s filter show $id" \
-		       ".[] | select(.options.handle == $handle) | \
-			    select(.options.actions[0].stats.packets $operator $count)" \
-		    &> /dev/null
-		ret=$?
-		if [[ $ret -eq 0 ]]; then
-			return $ret
-		fi
-		current_time="$(date -u +%s%3N)"
-		diff=$(expr $current_time - $start_time)
-		if [ "$diff" -gt "$TC_HIT_TIMEOUT" ]; then
-			return 1
-		fi
-	done
-}
-
 tc_check_packets()
 {
 	local id=$1
 	local handle=$2
 	local count=$3
 
-	__tc_check_packets "$id" "$handle" "$count" "=="
+	busywait "$TC_HIT_TIMEOUT" until_counter_is "== $count" \
+		 tc_rule_handle_stats_get "$id" "$handle" > /dev/null
 }
 
 tc_check_packets_hitting()
@@ -46,5 +21,6 @@ tc_check_packets_hitting()
 	local id=$1
 	local handle=$2
 
-	__tc_check_packets "$id" "$handle" 0 ">"
+	busywait "$TC_HIT_TIMEOUT" until_counter_is "> 0" \
+		 tc_rule_handle_stats_get "$id" "$handle" > /dev/null
 }