regulator: add device tree support for max8997
Add device tree based discovery support for max8997. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Thomas Abraham
Mark Brown
parent
068a8c8239
commit
77b71b370e
|
|
@ -0,0 +1,146 @@
|
|||
* Maxim MAX8997 Voltage and Current Regulator
|
||||
|
||||
The Maxim MAX8997 is a multi-function device which includes volatage and
|
||||
current regulators, rtc, charger controller and other sub-blocks. It is
|
||||
interfaced to the host controller using a i2c interface. Each sub-block is
|
||||
addressed by the host system using different i2c slave address. This document
|
||||
describes the bindings for 'pmic' sub-block of max8997.
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "maxim,max8997-pmic".
|
||||
- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
|
||||
|
||||
- max8997,pmic-buck1-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
||||
units for buck1 when changing voltage using gpio dvs. Refer to [1] below
|
||||
for additional information.
|
||||
|
||||
- max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
||||
units for buck2 when changing voltage using gpio dvs. Refer to [1] below
|
||||
for additional information.
|
||||
|
||||
- max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
||||
units for buck5 when changing voltage using gpio dvs. Refer to [1] below
|
||||
for additional information.
|
||||
|
||||
[1] If none of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
|
||||
property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage'
|
||||
property should specify atleast one voltage level (which would be a
|
||||
safe operating voltage).
|
||||
|
||||
If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
|
||||
property is specified, then all the eigth voltage values for the
|
||||
'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
|
||||
|
||||
Optional properties:
|
||||
- interrupt-parent: Specifies the phandle of the interrupt controller to which
|
||||
the interrupts from max8997 are delivered to.
|
||||
- interrupts: Interrupt specifiers for two interrupt sources.
|
||||
- First interrupt specifier is for 'irq1' interrupt.
|
||||
- Second interrupt specifier is for 'alert' interrupt.
|
||||
- max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs.
|
||||
- max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
|
||||
- max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs.
|
||||
|
||||
Additional properties required if either of the optional properties are used:
|
||||
- max8997,pmic-ignore-gpiodvs-side-effect: When GPIO-DVS mode is used for
|
||||
multiple bucks, changing the voltage value of one of the bucks may affect
|
||||
that of another buck, which is the side effect of the change (set_voltage).
|
||||
Use this property to ignore such side effects and change the voltage.
|
||||
|
||||
- max8997,pmic-buck125-default-dvs-idx: Default voltage setting selected from
|
||||
the possible 8 options selectable by the dvs gpios. The value of this
|
||||
property should be between 0 and 7. If not specified or if out of range, the
|
||||
default value of this property is set to 0.
|
||||
|
||||
- max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used
|
||||
for dvs. The format of the gpio specifier depends in the gpio controller.
|
||||
|
||||
Regulators: The regulators of max8997 that have to be instantiated should be
|
||||
included in a sub-node named 'regulators'. Regulator nodes included in this
|
||||
sub-node should be of the format as listed below.
|
||||
|
||||
regulator_name {
|
||||
standard regulator bindings here
|
||||
};
|
||||
|
||||
The following are the names of the regulators that the max8997 pmic block
|
||||
supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
|
||||
as per the datasheet of max8997.
|
||||
|
||||
- LDOn
|
||||
- valid values for n are 1 to 18 and 21
|
||||
- Example: LDO0, LD01, LDO2, LDO21
|
||||
- BUCKn
|
||||
- valid values for n are 1 to 7.
|
||||
- Example: BUCK1, BUCK2, BUCK3, BUCK7
|
||||
|
||||
- ENVICHG: Battery Charging Current Monitor Output. This is a fixed
|
||||
voltage type regulator
|
||||
|
||||
- ESAFEOUT1: (ldo19)
|
||||
- ESAFEOUT2: (ld020)
|
||||
|
||||
- CHARGER_CV: main battery charger voltage control
|
||||
- CHARGER: main battery charger current control
|
||||
- CHARGER_TOPOFF: end of charge current threshold level
|
||||
|
||||
The bindings inside the regulator nodes use the standard regulator bindings
|
||||
which are documented elsewhere.
|
||||
|
||||
Example:
|
||||
|
||||
max8997_pmic@66 {
|
||||
compatible = "maxim,max8997-pmic";
|
||||
interrupt-parent = <&wakeup_eint>;
|
||||
reg = <0x66>;
|
||||
interrupts = <4 0>, <3 0>;
|
||||
|
||||
max8997,pmic-buck1-uses-gpio-dvs;
|
||||
max8997,pmic-buck2-uses-gpio-dvs;
|
||||
max8997,pmic-buck5-uses-gpio-dvs;
|
||||
|
||||
max8997,pmic-ignore-gpiodvs-side-effect;
|
||||
max8997,pmic-buck125-default-dvs-idx = <0>;
|
||||
|
||||
max8997,pmic-buck125-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
|
||||
<&gpx0 1 1 0 0>, /* SET2 */
|
||||
<&gpx0 2 1 0 0>; /* SET3 */
|
||||
|
||||
max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
|
||||
<1250000>, <1200000>,
|
||||
<1150000>, <1100000>,
|
||||
<1000000>, <950000>;
|
||||
|
||||
max8997,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
|
||||
<1100000>, <1100000>,
|
||||
<1000000>, <1000000>,
|
||||
<1000000>, <1000000>;
|
||||
|
||||
max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
|
||||
<1200000>, <1200000>,
|
||||
<1200000>, <1200000>,
|
||||
<1200000>, <1200000>;
|
||||
|
||||
regulators {
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "VDD_ABB_3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ldo2_reg: LDO2 {
|
||||
regulator-name = "VDD_ALIVE_1.1V";
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck1_reg: BUCK1 {
|
||||
regulator-name = "VDD_ARM_1.2V";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -21,8 +21,10 @@
|
|||
* This driver is based on max8998.c
|
||||
*/
|
||||
|
||||
#include <linux/err.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/of_irq.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/pm_runtime.h>
|
||||
#include <linux/module.h>
|
||||
|
|
@ -47,6 +49,13 @@ static struct mfd_cell max8997_devs[] = {
|
|||
{ .name = "max8997-led", .id = 2 },
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static struct of_device_id __devinitdata max8997_pmic_dt_match[] = {
|
||||
{ .compatible = "maxim,max8997-pmic", .data = TYPE_MAX8997 },
|
||||
{},
|
||||
};
|
||||
#endif
|
||||
|
||||
int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest)
|
||||
{
|
||||
struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
|
||||
|
|
@ -123,6 +132,58 @@ int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
|
|||
}
|
||||
EXPORT_SYMBOL_GPL(max8997_update_reg);
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
/*
|
||||
* Only the common platform data elements for max8997 are parsed here from the
|
||||
* device tree. Other sub-modules of max8997 such as pmic, rtc and others have
|
||||
* to parse their own platform data elements from device tree.
|
||||
*
|
||||
* The max8997 platform data structure is instantiated here and the drivers for
|
||||
* the sub-modules need not instantiate another instance while parsing their
|
||||
* platform data.
|
||||
*/
|
||||
static struct max8997_platform_data *max8997_i2c_parse_dt_pdata(
|
||||
struct device *dev)
|
||||
{
|
||||
struct max8997_platform_data *pd;
|
||||
|
||||
pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
|
||||
if (!pd) {
|
||||
dev_err(dev, "could not allocate memory for pdata\n");
|
||||
return ERR_PTR(-ENOMEM);
|
||||
}
|
||||
|
||||
pd->ono = irq_of_parse_and_map(dev->of_node, 1);
|
||||
|
||||
/*
|
||||
* ToDo: the 'wakeup' member in the platform data is more of a linux
|
||||
* specfic information. Hence, there is no binding for that yet and
|
||||
* not parsed here.
|
||||
*/
|
||||
|
||||
return pd;
|
||||
}
|
||||
#else
|
||||
static struct max8997_platform_data *max8997_i2c_parse_dt_pdata(
|
||||
struct device *dev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
static inline int max8997_i2c_get_driver_data(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
#ifdef CONFIG_OF
|
||||
if (i2c->dev.of_node) {
|
||||
const struct of_device_id *match;
|
||||
match = of_match_node(max8997_pmic_dt_match, i2c->dev.of_node);
|
||||
return (int)match->data;
|
||||
}
|
||||
#endif
|
||||
return (int)id->driver_data;
|
||||
}
|
||||
|
||||
static int max8997_i2c_probe(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
|
|
@ -137,12 +198,21 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
|
|||
i2c_set_clientdata(i2c, max8997);
|
||||
max8997->dev = &i2c->dev;
|
||||
max8997->i2c = i2c;
|
||||
max8997->type = id->driver_data;
|
||||
max8997->type = max8997_i2c_get_driver_data(i2c, id);
|
||||
max8997->irq = i2c->irq;
|
||||
|
||||
if (max8997->dev->of_node) {
|
||||
pdata = max8997_i2c_parse_dt_pdata(max8997->dev);
|
||||
if (IS_ERR(pdata)) {
|
||||
ret = PTR_ERR(pdata);
|
||||
goto err;
|
||||
}
|
||||
}
|
||||
|
||||
if (!pdata)
|
||||
goto err;
|
||||
|
||||
max8997->pdata = pdata;
|
||||
max8997->ono = pdata->ono;
|
||||
|
||||
mutex_init(&max8997->iolock);
|
||||
|
|
@ -434,6 +504,7 @@ static struct i2c_driver max8997_i2c_driver = {
|
|||
.name = "max8997",
|
||||
.owner = THIS_MODULE,
|
||||
.pm = &max8997_pm,
|
||||
.of_match_table = of_match_ptr(max8997_pmic_dt_match),
|
||||
},
|
||||
.probe = max8997_i2c_probe,
|
||||
.remove = max8997_i2c_remove,
|
||||
|
|
|
|||
|
|
@ -24,6 +24,7 @@
|
|||
#include <linux/bug.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
|
@ -31,6 +32,7 @@
|
|||
#include <linux/regulator/machine.h>
|
||||
#include <linux/mfd/max8997.h>
|
||||
#include <linux/mfd/max8997-private.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
|
||||
struct max8997_data {
|
||||
struct device *dev;
|
||||
|
|
@ -933,10 +935,145 @@ static struct regulator_desc regulators[] = {
|
|||
max8997_charger_fixedstate_ops),
|
||||
};
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static int max8997_pmic_dt_parse_dvs_gpio(struct max8997_dev *iodev,
|
||||
struct max8997_platform_data *pdata,
|
||||
struct device_node *pmic_np)
|
||||
{
|
||||
int i, gpio;
|
||||
|
||||
for (i = 0; i < 3; i++) {
|
||||
gpio = of_get_named_gpio(pmic_np,
|
||||
"max8997,pmic-buck125-dvs-gpios", i);
|
||||
if (!gpio_is_valid(gpio)) {
|
||||
dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
|
||||
return -EINVAL;
|
||||
}
|
||||
pdata->buck125_gpios[i] = gpio;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int max8997_pmic_dt_parse_pdata(struct max8997_dev *iodev,
|
||||
struct max8997_platform_data *pdata)
|
||||
{
|
||||
struct device_node *pmic_np, *regulators_np, *reg_np;
|
||||
struct max8997_regulator_data *rdata;
|
||||
unsigned int i, dvs_voltage_nr = 1, ret;
|
||||
|
||||
pmic_np = iodev->dev->of_node;
|
||||
if (!pmic_np) {
|
||||
dev_err(iodev->dev, "could not find pmic sub-node\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
regulators_np = of_find_node_by_name(pmic_np, "regulators");
|
||||
if (!regulators_np) {
|
||||
dev_err(iodev->dev, "could not find regulators sub-node\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* count the number of regulators to be supported in pmic */
|
||||
pdata->num_regulators = 0;
|
||||
for_each_child_of_node(regulators_np, reg_np)
|
||||
pdata->num_regulators++;
|
||||
|
||||
rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) *
|
||||
pdata->num_regulators, GFP_KERNEL);
|
||||
if (!rdata) {
|
||||
dev_err(iodev->dev, "could not allocate memory for "
|
||||
"regulator data\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
pdata->regulators = rdata;
|
||||
for_each_child_of_node(regulators_np, reg_np) {
|
||||
for (i = 0; i < ARRAY_SIZE(regulators); i++)
|
||||
if (!of_node_cmp(reg_np->name, regulators[i].name))
|
||||
break;
|
||||
|
||||
if (i == ARRAY_SIZE(regulators)) {
|
||||
dev_warn(iodev->dev, "don't know how to configure "
|
||||
"regulator %s\n", reg_np->name);
|
||||
continue;
|
||||
}
|
||||
|
||||
rdata->id = i;
|
||||
rdata->initdata = of_get_regulator_init_data(
|
||||
iodev->dev, reg_np);
|
||||
rdata->reg_node = reg_np;
|
||||
rdata++;
|
||||
}
|
||||
|
||||
if (of_get_property(pmic_np, "max8997,pmic-buck1-uses-gpio-dvs", NULL))
|
||||
pdata->buck1_gpiodvs = true;
|
||||
|
||||
if (of_get_property(pmic_np, "max8997,pmic-buck2-uses-gpio-dvs", NULL))
|
||||
pdata->buck2_gpiodvs = true;
|
||||
|
||||
if (of_get_property(pmic_np, "max8997,pmic-buck5-uses-gpio-dvs", NULL))
|
||||
pdata->buck5_gpiodvs = true;
|
||||
|
||||
if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
|
||||
pdata->buck5_gpiodvs) {
|
||||
ret = max8997_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
|
||||
if (ret)
|
||||
return -EINVAL;
|
||||
|
||||
if (of_property_read_u32(pmic_np,
|
||||
"max8997,pmic-buck125-default-dvs-idx",
|
||||
&pdata->buck125_default_idx)) {
|
||||
pdata->buck125_default_idx = 0;
|
||||
} else {
|
||||
if (pdata->buck125_default_idx >= 8) {
|
||||
pdata->buck125_default_idx = 0;
|
||||
dev_info(iodev->dev, "invalid value for "
|
||||
"default dvs index, using 0 instead\n");
|
||||
}
|
||||
}
|
||||
|
||||
if (of_get_property(pmic_np,
|
||||
"max8997,pmic-ignore-gpiodvs-side-effect", NULL))
|
||||
pdata->ignore_gpiodvs_side_effect = true;
|
||||
|
||||
dvs_voltage_nr = 8;
|
||||
}
|
||||
|
||||
if (of_property_read_u32_array(pmic_np,
|
||||
"max8997,pmic-buck1-dvs-voltage",
|
||||
pdata->buck1_voltage, dvs_voltage_nr)) {
|
||||
dev_err(iodev->dev, "buck1 voltages not specified\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (of_property_read_u32_array(pmic_np,
|
||||
"max8997,pmic-buck2-dvs-voltage",
|
||||
pdata->buck2_voltage, dvs_voltage_nr)) {
|
||||
dev_err(iodev->dev, "buck2 voltages not specified\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (of_property_read_u32_array(pmic_np,
|
||||
"max8997,pmic-buck5-dvs-voltage",
|
||||
pdata->buck5_voltage, dvs_voltage_nr)) {
|
||||
dev_err(iodev->dev, "buck5 voltages not specified\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
#else
|
||||
static int max8997_pmic_dt_parse_pdata(struct max8997_dev *iodev,
|
||||
struct max8997_platform_data *pdata)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
#endif /* CONFIG_OF */
|
||||
|
||||
static __devinit int max8997_pmic_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
|
||||
struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
|
||||
struct max8997_platform_data *pdata = iodev->pdata;
|
||||
struct regulator_config config = { };
|
||||
struct regulator_dev **rdev;
|
||||
struct max8997_data *max8997;
|
||||
|
|
@ -944,11 +1081,17 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
|
|||
int i, ret, size, nr_dvs;
|
||||
u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0;
|
||||
|
||||
if (!pdata) {
|
||||
if (IS_ERR_OR_NULL(pdata)) {
|
||||
dev_err(pdev->dev.parent, "No platform init data supplied.\n");
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
if (iodev->dev->of_node) {
|
||||
ret = max8997_pmic_dt_parse_pdata(iodev, pdata);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
max8997 = devm_kzalloc(&pdev->dev, sizeof(struct max8997_data),
|
||||
GFP_KERNEL);
|
||||
if (!max8997)
|
||||
|
|
@ -1104,6 +1247,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
|
|||
config.dev = max8997->dev;
|
||||
config.init_data = pdata->regulators[i].initdata;
|
||||
config.driver_data = max8997;
|
||||
config.of_node = pdata->regulators[i].reg_node;
|
||||
|
||||
rdev[i] = regulator_register(®ulators[id], &config);
|
||||
if (IS_ERR(rdev[i])) {
|
||||
|
|
|
|||
|
|
@ -316,6 +316,7 @@ enum max8997_irq {
|
|||
#define MAX8997_NUM_GPIO 12
|
||||
struct max8997_dev {
|
||||
struct device *dev;
|
||||
struct max8997_platform_data *pdata;
|
||||
struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */
|
||||
struct i2c_client *rtc; /* slave addr 0x0c */
|
||||
struct i2c_client *haptic; /* slave addr 0x90 */
|
||||
|
|
|
|||
|
|
@ -75,6 +75,7 @@ enum max8998_regulators {
|
|||
struct max8997_regulator_data {
|
||||
int id;
|
||||
struct regulator_init_data *initdata;
|
||||
struct device_node *reg_node;
|
||||
};
|
||||
|
||||
enum max8997_muic_usb_type {
|
||||
|
|
|
|||
Loading…
Reference in New Issue