riscv: dts: allwinner: Add Sipeed Lichee RV devicetrees

Sipeed manufactures a "Lichee RV" system-on-module, which provides a
minimal working system on its own, as well as a few carrier boards. The
"Dock" board provides audio, USB, and WiFi. The "86 Panel" additionally
provides 100M Ethernet and a built-in display panel.

The 86 Panel repurposes the USB ID and VBUS detection GPIOs for its RGB
panel interface, since the USB OTG port is inaccessible inside the case.

Co-developed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230126045738.47903-8-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
This commit is contained in:
Samuel Holland 2023-01-25 22:57:34 -06:00 committed by Jernej Skrabec
parent 88ea698914
commit 7705ce5ab0
6 changed files with 346 additions and 0 deletions

View File

@ -1,3 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-480p.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-86-panel-720p.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv-dock.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-lichee-rv.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1-nezha.dtb
dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1s-mangopi-mq.dtb

View File

@ -0,0 +1,29 @@
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
#include "sun20i-d1-lichee-rv-86-panel.dtsi"
/ {
model = "Sipeed Lichee RV 86 Panel (480p)";
compatible = "sipeed,lichee-rv-86-panel-480p", "sipeed,lichee-rv",
"allwinner,sun20i-d1";
};
&i2c2 {
pinctrl-0 = <&i2c2_pb0_pins>;
pinctrl-names = "default";
status = "okay";
touchscreen@48 {
compatible = "focaltech,ft6236";
reg = <0x48>;
interrupt-parent = <&pio>;
interrupts = <6 14 IRQ_TYPE_LEVEL_LOW>; /* PG14 */
iovcc-supply = <&reg_vcc_3v3>;
reset-gpios = <&pio 6 15 GPIO_ACTIVE_LOW>; /* PG15 */
touchscreen-size-x = <480>;
touchscreen-size-y = <480>;
vcc-supply = <&reg_vcc_3v3>;
wakeup-source;
};
};

View File

@ -0,0 +1,10 @@
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
#include "sun20i-d1-lichee-rv-86-panel.dtsi"
/ {
model = "Sipeed Lichee RV 86 Panel (720p)";
compatible = "sipeed,lichee-rv-86-panel-720p", "sipeed,lichee-rv",
"allwinner,sun20i-d1";
};

View File

@ -0,0 +1,119 @@
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
#include "sun20i-d1-lichee-rv.dts"
/ {
aliases {
ethernet0 = &emac;
ethernet1 = &xr829;
};
dmic_codec: dmic-codec {
compatible = "dmic-codec";
num-channels = <2>;
#sound-dai-cells = <0>;
};
dmic-sound {
compatible = "simple-audio-card";
simple-audio-card,name = "DMIC";
#address-cells = <1>;
#size-cells = <0>;
simple-audio-card,dai-link@0 {
reg = <0>;
format = "pdm";
frame-master = <&link0_cpu>;
bitclock-master = <&link0_cpu>;
link0_cpu: cpu {
sound-dai = <&dmic>;
};
link0_codec: codec {
sound-dai = <&dmic_codec>;
};
};
};
/* PC1 is repurposed as BT_WAKE_AP */
/delete-node/ leds;
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&ccu CLK_FANOUT1>;
clock-names = "ext_clock";
reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
assigned-clocks = <&ccu CLK_FANOUT1>;
assigned-clock-rates = <32768>;
pinctrl-0 = <&clk_pg11_pin>;
pinctrl-names = "default";
};
};
&dmic {
pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
pinctrl-names = "default";
status = "okay";
};
&ehci1 {
status = "okay";
};
&emac {
pinctrl-0 = <&rmii_pe_pins>;
pinctrl-names = "default";
phy-handle = <&ext_rmii_phy>;
phy-mode = "rmii";
phy-supply = <&reg_vcc_3v3>;
status = "okay";
};
&mdio {
ext_rmii_phy: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */
};
};
&mmc1 {
bus-width = <4>;
mmc-pwrseq = <&wifi_pwrseq>;
non-removable;
vmmc-supply = <&reg_vcc_3v3>;
vqmmc-supply = <&reg_vcc_3v3>;
pinctrl-0 = <&mmc1_pins>;
pinctrl-names = "default";
status = "okay";
xr829: wifi@1 {
reg = <1>;
};
};
&ohci1 {
status = "okay";
};
&uart1 {
uart-has-rtscts;
pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
pinctrl-names = "default";
status = "okay";
/* XR829 bluetooth is connected here */
};
&usb_otg {
status = "disabled";
};
&usbphy {
/* PD20 and PD21 are repurposed for the LCD panel */
/delete-property/ usb0_id_det-gpios;
/delete-property/ usb0_vbus_det-gpios;
usb1_vbus-supply = <&reg_vcc>;
};

View File

@ -0,0 +1,97 @@
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
// Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
#include <dt-bindings/input/input.h>
#include "sun20i-d1-lichee-rv.dts"
/ {
model = "Sipeed Lichee RV Dock";
compatible = "sipeed,lichee-rv-dock", "sipeed,lichee-rv",
"allwinner,sun20i-d1";
aliases {
ethernet1 = &rtl8723ds;
};
dmic_codec: dmic-codec {
compatible = "dmic-codec";
num-channels = <2>;
#sound-dai-cells = <0>;
};
dmic-sound {
compatible = "simple-audio-card";
simple-audio-card,name = "DMIC";
#address-cells = <1>;
#size-cells = <0>;
simple-audio-card,dai-link@0 {
reg = <0>;
format = "pdm";
frame-master = <&link0_cpu>;
bitclock-master = <&link0_cpu>;
link0_cpu: cpu {
sound-dai = <&dmic>;
};
link0_codec: codec {
sound-dai = <&dmic_codec>;
};
};
};
wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
};
};
&dmic {
pinctrl-0 = <&dmic_pb11_d0_pin>, <&dmic_pe17_clk_pin>;
pinctrl-names = "default";
status = "okay";
};
&ehci1 {
status = "okay";
};
&mmc1 {
bus-width = <4>;
mmc-pwrseq = <&wifi_pwrseq>;
non-removable;
vmmc-supply = <&reg_vcc_3v3>;
vqmmc-supply = <&reg_vcc_3v3>;
pinctrl-0 = <&mmc1_pins>;
pinctrl-names = "default";
status = "okay";
rtl8723ds: wifi@1 {
reg = <1>;
};
};
&ohci1 {
status = "okay";
};
&uart1 {
uart-has-rtscts;
pinctrl-0 = <&uart1_pg6_pins>, <&uart1_pg8_rts_cts_pins>;
pinctrl-names = "default";
status = "okay";
bluetooth {
compatible = "realtek,rtl8723ds-bt";
device-wake-gpios = <&pio 6 15 GPIO_ACTIVE_HIGH>; /* PG16 */
enable-gpios = <&pio 6 18 GPIO_ACTIVE_HIGH>; /* PG18 */
host-wake-gpios = <&pio 6 17 GPIO_ACTIVE_HIGH>; /* PG17 */
};
};
&usbphy {
usb1_vbus-supply = <&reg_vcc>;
};

View File

@ -0,0 +1,87 @@
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
// Copyright (C) 2022 Jisheng Zhang <jszhang@kernel.org>
// Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
/dts-v1/;
#include "sun20i-d1.dtsi"
#include "sun20i-common-regulators.dtsi"
/ {
model = "Sipeed Lichee RV";
compatible = "sipeed,lichee-rv", "allwinner,sun20i-d1";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
led-0 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&pio 2 1 GPIO_ACTIVE_HIGH>; /* PC1 */
};
};
reg_vdd_cpu: vdd-cpu {
compatible = "regulator-fixed";
regulator-name = "vdd-cpu";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
vin-supply = <&reg_vcc>;
};
};
&cpu0 {
cpu-supply = <&reg_vdd_cpu>;
};
&dcxo {
clock-frequency = <24000000>;
};
&ehci0 {
status = "okay";
};
&mmc0 {
broken-cd;
bus-width = <4>;
disable-wp;
vmmc-supply = <&reg_vcc_3v3>;
vqmmc-supply = <&reg_vcc_3v3>;
pinctrl-0 = <&mmc0_pins>;
pinctrl-names = "default";
status = "okay";
};
&ohci0 {
status = "okay";
};
&uart0 {
pinctrl-0 = <&uart0_pb8_pins>;
pinctrl-names = "default";
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
usb0_id_det-gpios = <&pio 3 21 GPIO_ACTIVE_HIGH>; /* PD21 */
usb0_vbus_det-gpios = <&pio 3 20 GPIO_ACTIVE_HIGH>; /* PD20 */
usb0_vbus-supply = <&reg_vcc>;
status = "okay";
};