Merge tag 'v5.3-rc8' into rdma.git for-next

To resolve dependencies in following patches

mlx5_ib.h conflict resolved by keeing both hunks

Linux 5.3-rc8

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

.clang-format

@@ -107,10 +107,13 @@ ForEachMacros:
   - 'css_for_each_descendant_post'
   - 'css_for_each_descendant_pre'
   - 'device_for_each_child_node'
+  - 'dma_fence_chain_for_each'
   - 'drm_atomic_crtc_for_each_plane'
   - 'drm_atomic_crtc_state_for_each_plane'
   - 'drm_atomic_crtc_state_for_each_plane_state'
   - 'drm_atomic_for_each_plane_damage'
+  - 'drm_client_for_each_connector_iter'
+  - 'drm_client_for_each_modeset'
   - 'drm_connector_for_each_possible_encoder'
   - 'drm_for_each_connector_iter'
   - 'drm_for_each_crtc'
@@ -126,6 +129,7 @@ ForEachMacros:
   - 'drm_mm_for_each_node_in_range'
   - 'drm_mm_for_each_node_safe'
   - 'flow_action_for_each'
+  - 'for_each_active_dev_scope'
   - 'for_each_active_drhd_unit'
   - 'for_each_active_iommu'
   - 'for_each_available_child_of_node'
@@ -153,6 +157,8 @@ ForEachMacros:
   - 'for_each_cpu_not'
   - 'for_each_cpu_wrap'
   - 'for_each_dev_addr'
+  - 'for_each_dev_scope'
+  - 'for_each_displayid_db'
   - 'for_each_dma_cap_mask'
   - 'for_each_dpcm_be'
   - 'for_each_dpcm_be_rollback'
@@ -169,6 +175,8 @@ ForEachMacros:
   - 'for_each_evictable_lru'
   - 'for_each_fib6_node_rt_rcu'
   - 'for_each_fib6_walker_rt'
+  - 'for_each_free_mem_pfn_range_in_zone'
+  - 'for_each_free_mem_pfn_range_in_zone_from'
   - 'for_each_free_mem_range'
   - 'for_each_free_mem_range_reverse'
   - 'for_each_func_rsrc'
@@ -178,6 +186,7 @@ ForEachMacros:
   - 'for_each_ip_tunnel_rcu'
   - 'for_each_irq_nr'
   - 'for_each_link_codecs'
+  - 'for_each_link_platforms'
   - 'for_each_lru'
   - 'for_each_matching_node'
   - 'for_each_matching_node_and_match'
@@ -302,7 +311,10 @@ ForEachMacros:
   - 'ide_port_for_each_present_dev'
   - 'idr_for_each_entry'
   - 'idr_for_each_entry_continue'
+  - 'idr_for_each_entry_continue_ul'
   - 'idr_for_each_entry_ul'
+  - 'in_dev_for_each_ifa_rcu'
+  - 'in_dev_for_each_ifa_rtnl'
   - 'inet_bind_bucket_for_each'
   - 'inet_lhash2_for_each_icsk_rcu'
   - 'key_for_each'
@@ -343,8 +355,6 @@ ForEachMacros:
   - 'media_device_for_each_intf'
   - 'media_device_for_each_link'
   - 'media_device_for_each_pad'
-  - 'mp_bvec_for_each_page'
-  - 'mp_bvec_for_each_segment'
   - 'nanddev_io_for_each_page'
   - 'netdev_for_each_lower_dev'
   - 'netdev_for_each_lower_private'
@@ -381,18 +391,19 @@ ForEachMacros:
   - 'radix_tree_for_each_slot'
   - 'radix_tree_for_each_tagged'
   - 'rbtree_postorder_for_each_entry_safe'
+  - 'rdma_for_each_block'
   - 'rdma_for_each_port'
   - 'resource_list_for_each_entry'
   - 'resource_list_for_each_entry_safe'
   - 'rhl_for_each_entry_rcu'
   - 'rhl_for_each_rcu'
   - 'rht_for_each'
-  - 'rht_for_each_from'
   - 'rht_for_each_entry'
   - 'rht_for_each_entry_from'
   - 'rht_for_each_entry_rcu'
   - 'rht_for_each_entry_rcu_from'
   - 'rht_for_each_entry_safe'
+  - 'rht_for_each_from'
   - 'rht_for_each_rcu'
   - 'rht_for_each_rcu_from'
   - '__rq_for_each_bio'

.mailmap

@@ -64,6 +64,9 @@ Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@imgtec.com>
 Dengcheng Zhu <dzhu@wavecomp.com> <dczhu@mips.com>
 Dengcheng Zhu <dzhu@wavecomp.com> <dengcheng.zhu@gmail.com>
 Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+Dmitry Safonov <0x7f454c46@gmail.com> <dsafonov@virtuozzo.com>
+Dmitry Safonov <0x7f454c46@gmail.com> <d.safonov@partner.samsung.com>
+Dmitry Safonov <0x7f454c46@gmail.com> <dima@arista.com>
 Domen Puncer <domen@coderock.org>
 Douglas Gilbert <dougg@torque.net>
 Ed L. Cashin <ecashin@coraid.com>
@@ -160,6 +163,8 @@ Matt Ranostay <mranostay@gmail.com> Matthew Ranostay <mranostay@embeddedalley.co
 Matt Ranostay <mranostay@gmail.com> <matt.ranostay@intel.com>
 Matt Ranostay <matt.ranostay@konsulko.com> <matt@ranostay.consulting>
 Matt Redfearn <matt.redfearn@mips.com> <matt.redfearn@imgtec.com>
+Maxime Ripard <mripard@kernel.org> <maxime.ripard@bootlin.com>
+Maxime Ripard <mripard@kernel.org> <maxime.ripard@free-electrons.com>
 Mayuresh Janorkar <mayur@ti.com>
 Michael Buesch <m@bues.ch>
 Michel Dänzer <michel@tungstengraphics.com>

Documentation/PCI/index.rst

@@ -9,7 +9,7 @@ Linux PCI Bus Subsystem
    :numbered:
 
    pci
-   picebus-howto
+   pciebus-howto
    pci-iov-howto
    msi-howto
    acpi-info

Documentation/admin-guide/kernel-parameters.txt

@@ -4090,6 +4090,13 @@
 			Run specified binary instead of /init from the ramdisk,
 			used for early userspace startup. See initrd.
 
+	rdrand=		[X86]
+			force - Override the decision by the kernel to hide the
+				advertisement of RDRAND support (this affects
+				certain AMD processors because of buggy BIOS
+				support, specifically around the suspend/resume
+				path).
+
 	rdt=		[HW,X86,RDT]
 			Turn on/off individual RDT features. List is:
 			cmt, mbmtotal, mbmlocal, l3cat, l3cdp, l2cat, l2cdp,

Documentation/admin-guide/sysctl/net.rst

@@ -39,7 +39,6 @@ Table : Subdirectories in /proc/sys/net
  802       E802 protocol         ax25       AX25
  ethernet  Ethernet protocol     rose       X.25 PLP layer
  ipv4      IP version 4          x25        X.25 protocol
- ipx       IPX                   token-ring IBM token ring
  bridge    Bridging              decnet     DEC net
  ipv6      IP version 6          tipc       TIPC
  ========= =================== = ========== ==================
@@ -401,33 +400,7 @@ interface.
 (network) that the route leads to, the router (may be directly connected), the
 route flags, and the device the route is using.
 
-
+5. TIPC
-5. IPX
-------
-
-The IPX protocol has no tunable values in proc/sys/net.
-
-The IPX  protocol  does,  however,  provide  proc/net/ipx. This lists each IPX
-socket giving  the  local  and  remote  addresses  in  Novell  format (that is
-network:node:port). In  accordance  with  the  strange  Novell  tradition,
-everything but the port is in hex. Not_Connected is displayed for sockets that
-are not  tied to a specific remote address. The Tx and Rx queue sizes indicate
-the number  of  bytes  pending  for  transmission  and  reception.  The  state
-indicates the  state  the  socket  is  in and the uid is the owning uid of the
-socket.
-
-The /proc/net/ipx_interface  file lists all IPX interfaces. For each interface
-it gives  the network number, the node number, and indicates if the network is
-the primary  network.  It  also  indicates  which  device  it  is bound to (or
-Internal for  internal  networks)  and  the  Frame  Type if appropriate. Linux
-supports 802.3,  802.2,  802.2  SNAP  and DIX (Blue Book) ethernet framing for
-IPX.
-
-The /proc/net/ipx_route  table  holds  a list of IPX routes. For each route it
-gives the  destination  network, the router node (or Directly) and the network
-address of the router (or Connected) for internal networks.
-
-6. TIPC
 -------
 
 tipc_rmem

Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt

@@ -1,20 +1,30 @@
 * ARC-HS Interrupt Distribution Unit
 
-  This optional 2nd level interrupt controller can be used in SMP configurations for
+  This optional 2nd level interrupt controller can be used in SMP configurations
-  dynamic IRQ routing, load balancing of common/external IRQs towards core intc.
+  for dynamic IRQ routing, load balancing of common/external IRQs towards core
+  intc.
 
 Properties:
 
 - compatible: "snps,archs-idu-intc"
 - interrupt-controller: This is an interrupt controller.
-- #interrupt-cells: Must be <1>.
+- #interrupt-cells: Must be <1> or <2>.
 
-  Value of the cell specifies the "common" IRQ from peripheral to IDU. Number N
+  Value of the first cell specifies the "common" IRQ from peripheral to IDU.
-  of the particular interrupt line of IDU corresponds to the line N+24 of the
+  Number N of the particular interrupt line of IDU corresponds to the line N+24
-  core interrupt controller.
+  of the core interrupt controller.
 
-  intc accessed via the special ARC AUX register interface, hence "reg" property
+  The (optional) second cell specifies any of the following flags:
-  is not specified.
+    - bits[3:0] trigger type and level flags
+        1 = low-to-high edge triggered
+        2 = NOT SUPPORTED (high-to-low edge triggered)
+        4 = active high level-sensitive <<< DEFAULT
+        8 = NOT SUPPORTED (active low level-sensitive)
+  When no second cell is specified, the interrupt is assumed to be level
+  sensitive.
+
+  The interrupt controller is accessed via the special ARC AUX register
+  interface, hence "reg" property is not specified.
 
 Example:
 	core_intc: core-interrupt-controller {

Documentation/devicetree/bindings/net/dsa/ksz.txt

@@ -12,6 +12,7 @@ Required properties:
   - "microchip,ksz8565"
   - "microchip,ksz9893"
   - "microchip,ksz9563"
+  - "microchip,ksz8563"
 
 Optional properties:
 

Documentation/devicetree/bindings/net/macb.txt

@@ -15,10 +15,10 @@ Required properties:
   Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
   Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
   Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC.
-  Use "sifive,fu540-macb" for SiFive FU540-C000 SoC.
+  Use "sifive,fu540-c000-gem" for SiFive FU540-C000 SoC.
   Or the generic form: "cdns,emac".
 - reg: Address and length of the register set for the device
-	For "sifive,fu540-macb", second range is required to specify the
+	For "sifive,fu540-c000-gem", second range is required to specify the
 	address and length of the registers for GEMGXL Management block.
 - interrupts: Should contain macb interrupt
 - phy-mode: See ethernet.txt file in the same directory.

Documentation/networking/tls-offload.rst

@@ -506,21 +506,3 @@ Drivers should ignore the changes to TLS the device feature flags.
 These flags will be acted upon accordingly by the core ``ktls`` code.
 TLS device feature flags only control adding of new TLS connection
 offloads, old connections will remain active after flags are cleared.
-
-Known bugs
-==========
-
-skb_orphan() leaks clear text
------------------------------
-
-Currently drivers depend on the :c:member:`sk` member of
-:c:type:`struct sk_buff <sk_buff>` to identify segments requiring
-encryption. Any operation which removes or does not preserve the socket
-association such as :c:func:`skb_orphan` or :c:func:`skb_clone`
-will cause the driver to miss the packets and lead to clear text leaks.
-
-Redirects leak clear text
--------------------------
-
-In the RX direction, if segment has already been decrypted by the device
-and it gets redirected or mirrored - clear text will be transmitted out.

Documentation/networking/tuntap.txt

@@ -204,8 +204,8 @@ Ethernet device, which instead of receiving packets from a physical
 media, receives them from user space program and instead of sending 
 packets via physical media sends them to the user space program. 
 
-Let's say that you configured IPX on the tap0, then whenever 
+Let's say that you configured IPv6 on the tap0, then whenever
-the kernel sends an IPX packet to tap0, it is passed to the application
+the kernel sends an IPv6 packet to tap0, it is passed to the application
 (VTun for example). The application encrypts, compresses and sends it to 
 the other side over TCP or UDP. The application on the other side decompresses
 and decrypts the data received and writes the packet to the TAP device, 

Documentation/process/embargoed-hardware-issues.rst

@@ -0,0 +1,279 @@
+Embargoed hardware issues
+=========================
+
+Scope
+-----
+
+Hardware issues which result in security problems are a different category
+of security bugs than pure software bugs which only affect the Linux
+kernel.
+
+Hardware issues like Meltdown, Spectre, L1TF etc. must be treated
+differently because they usually affect all Operating Systems ("OS") and
+therefore need coordination across different OS vendors, distributions,
+hardware vendors and other parties. For some of the issues, software
+mitigations can depend on microcode or firmware updates, which need further
+coordination.
+
+.. _Contact:
+
+Contact
+-------
+
+The Linux kernel hardware security team is separate from the regular Linux
+kernel security team.
+
+The team only handles the coordination of embargoed hardware security
+issues.  Reports of pure software security bugs in the Linux kernel are not
+handled by this team and the reporter will be guided to contact the regular
+Linux kernel security team (:ref:`Documentation/admin-guide/
+<securitybugs>`) instead.
+
+The team can be contacted by email at <hardware-security@kernel.org>. This
+is a private list of security officers who will help you to coordinate an
+issue according to our documented process.
+
+The list is encrypted and email to the list can be sent by either PGP or
+S/MIME encrypted and must be signed with the reporter's PGP key or S/MIME
+certificate. The list's PGP key and S/MIME certificate are available from
+https://www.kernel.org/....
+
+While hardware security issues are often handled by the affected hardware
+vendor, we welcome contact from researchers or individuals who have
+identified a potential hardware flaw.
+
+Hardware security officers
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The current team of hardware security officers:
+
+  - Linus Torvalds (Linux Foundation Fellow)
+  - Greg Kroah-Hartman (Linux Foundation Fellow)
+  - Thomas Gleixner (Linux Foundation Fellow)
+
+Operation of mailing-lists
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The encrypted mailing-lists which are used in our process are hosted on
+Linux Foundation's IT infrastructure. By providing this service Linux
+Foundation's director of IT Infrastructure security technically has the
+ability to access the embargoed information, but is obliged to
+confidentiality by his employment contract. Linux Foundation's director of
+IT Infrastructure security is also responsible for the kernel.org
+infrastructure.
+
+The Linux Foundation's current director of IT Infrastructure security is
+Konstantin Ryabitsev.
+
+
+Non-disclosure agreements
+-------------------------
+
+The Linux kernel hardware security team is not a formal body and therefore
+unable to enter into any non-disclosure agreements.  The kernel community
+is aware of the sensitive nature of such issues and offers a Memorandum of
+Understanding instead.
+
+
+Memorandum of Understanding
+---------------------------
+
+The Linux kernel community has a deep understanding of the requirement to
+keep hardware security issues under embargo for coordination between
+different OS vendors, distributors, hardware vendors and other parties.
+
+The Linux kernel community has successfully handled hardware security
+issues in the past and has the necessary mechanisms in place to allow
+community compliant development under embargo restrictions.
+
+The Linux kernel community has a dedicated hardware security team for
+initial contact, which oversees the process of handling such issues under
+embargo rules.
+
+The hardware security team identifies the developers (domain experts) who
+will form the initial response team for a particular issue. The initial
+response team can bring in further developers (domain experts) to address
+the issue in the best technical way.
+
+All involved developers pledge to adhere to the embargo rules and to keep
+the received information confidential. Violation of the pledge will lead to
+immediate exclusion from the current issue and removal from all related
+mailing-lists. In addition, the hardware security team will also exclude
+the offender from future issues. The impact of this consequence is a highly
+effective deterrent in our community. In case a violation happens the
+hardware security team will inform the involved parties immediately. If you
+or anyone becomes aware of a potential violation, please report it
+immediately to the Hardware security officers.
+
+
+Process
+^^^^^^^
+
+Due to the globally distributed nature of Linux kernel development,
+face-to-face meetings are almost impossible to address hardware security
+issues.  Phone conferences are hard to coordinate due to time zones and
+other factors and should be only used when absolutely necessary. Encrypted
+email has been proven to be the most effective and secure communication
+method for these types of issues.
+
+Start of Disclosure
+"""""""""""""""""""
+
+Disclosure starts by contacting the Linux kernel hardware security team by
+email. This initial contact should contain a description of the problem and
+a list of any known affected hardware. If your organization builds or
+distributes the affected hardware, we encourage you to also consider what
+other hardware could be affected.
+
+The hardware security team will provide an incident-specific encrypted
+mailing-list which will be used for initial discussion with the reporter,
+further disclosure and coordination.
+
+The hardware security team will provide the disclosing party a list of
+developers (domain experts) who should be informed initially about the
+issue after confirming with the developers  that they will adhere to this
+Memorandum of Understanding and the documented process. These developers
+form the initial response team and will be responsible for handling the
+issue after initial contact. The hardware security team is supporting the
+response team, but is not necessarily involved in the mitigation
+development process.
+
+While individual developers might be covered by a non-disclosure agreement
+via their employer, they cannot enter individual non-disclosure agreements
+in their role as Linux kernel developers. They will, however, agree to
+adhere to this documented process and the Memorandum of Understanding.
+
+
+Disclosure
+""""""""""
+
+The disclosing party provides detailed information to the initial response
+team via the specific encrypted mailing-list.
+
+From our experience the technical documentation of these issues is usually
+a sufficient starting point and further technical clarification is best
+done via email.
+
+Mitigation development
+""""""""""""""""""""""
+
+The initial response team sets up an encrypted mailing-list or repurposes
+an existing one if appropriate. The disclosing party should provide a list
+of contacts for all other parties who have already been, or should be,
+informed about the issue. The response team contacts these parties so they
+can name experts who should be subscribed to the mailing-list.
+
+Using a mailing-list is close to the normal Linux development process and
+has been successfully used in developing mitigations for various hardware
+security issues in the past.
+
+The mailing-list operates in the same way as normal Linux development.
+Patches are posted, discussed and reviewed and if agreed on applied to a
+non-public git repository which is only accessible to the participating
+developers via a secure connection. The repository contains the main
+development branch against the mainline kernel and backport branches for
+stable kernel versions as necessary.
+
+The initial response team will identify further experts from the Linux
+kernel developer community as needed and inform the disclosing party about
+their participation. Bringing in experts can happen at any time of the
+development process and often needs to be handled in a timely manner.
+
+Coordinated release
+"""""""""""""""""""
+
+The involved parties will negotiate the date and time where the embargo
+ends. At that point the prepared mitigations are integrated into the
+relevant kernel trees and published.
+
+While we understand that hardware security issues need coordinated embargo
+time, the embargo time should be constrained to the minimum time which is
+required for all involved parties to develop, test and prepare the
+mitigations. Extending embargo time artificially to meet conference talk
+dates or other non-technical reasons is creating more work and burden for
+the involved developers and response teams as the patches need to be kept
+up to date in order to follow the ongoing upstream kernel development,
+which might create conflicting changes.
+
+CVE assignment
+""""""""""""""
+
+Neither the hardware security team nor the initial response team assign
+CVEs, nor are CVEs required for the development process. If CVEs are
+provided by the disclosing party they can be used for documentation
+purposes.
+
+Process ambassadors
+-------------------
+
+For assistance with this process we have established ambassadors in various
+organizations, who can answer questions about or provide guidance on the
+reporting process and further handling. Ambassadors are not involved in the
+disclosure of a particular issue, unless requested by a response team or by
+an involved disclosed party. The current ambassadors list:
+
+  ============= ========================================================
+  ARM
+  AMD
+  IBM
+  Intel
+  Qualcomm	Trilok Soni <tsoni@codeaurora.org>
+
+  Microsoft	Sasha Levin <sashal@kernel.org>
+  VMware
+  Xen		Andrew Cooper <andrew.cooper3@citrix.com>
+
+  Canonical	Tyler Hicks <tyhicks@canonical.com>
+  Debian	Ben Hutchings <ben@decadent.org.uk>
+  Oracle	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+  Red Hat	Josh Poimboeuf <jpoimboe@redhat.com>
+  SUSE		Jiri Kosina <jkosina@suse.cz>
+
+  Amazon
+  Google	Kees Cook <keescook@chromium.org>
+  ============= ========================================================
+
+If you want your organization to be added to the ambassadors list, please
+contact the hardware security team. The nominated ambassador has to
+understand and support our process fully and is ideally well connected in
+the Linux kernel community.
+
+Encrypted mailing-lists
+-----------------------
+
+We use encrypted mailing-lists for communication. The operating principle
+of these lists is that email sent to the list is encrypted either with the
+list's PGP key or with the list's S/MIME certificate. The mailing-list
+software decrypts the email and re-encrypts it individually for each
+subscriber with the subscriber's PGP key or S/MIME certificate. Details
+about the mailing-list software and the setup which is used to ensure the
+security of the lists and protection of the data can be found here:
+https://www.kernel.org/....
+
+List keys
+^^^^^^^^^
+
+For initial contact see :ref:`Contact`. For incident specific mailing-lists
+the key and S/MIME certificate are conveyed to the subscribers by email
+sent from the specific list.
+
+Subscription to incident specific lists
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Subscription is handled by the response teams. Disclosed parties who want
+to participate in the communication send a list of potential subscribers to
+the response team so the response team can validate subscription requests.
+
+Each subscriber needs to send a subscription request to the response team
+by email. The email must be signed with the subscriber's PGP key or S/MIME
+certificate. If a PGP key is used, it must be available from a public key
+server and is ideally connected to the Linux kernel's PGP web of trust. See
+also: https://www.kernel.org/signature.html.
+
+The response team verifies that the subscriber request is valid and adds
+the subscriber to the list. After subscription the subscriber will receive
+email from the mailing-list which is signed either with the list's PGP key
+or the list's S/MIME certificate. The subscriber's email client can extract
+the PGP key or the S/MIME certificate from the signature so the subscriber
+can send encrypted email to the list.
+

Documentation/process/index.rst

@@ -45,6 +45,7 @@ Other guides to the community that are of interest to most developers are:
    submit-checklist
    kernel-docs
    deprecated
+   embargoed-hardware-issues
 
 These are some overall technical guides that have been put here for now for
 lack of a better place.

MAINTAINERS

@@ -183,7 +183,7 @@ M:	Realtek linux nic maintainers <nic_swsd@realtek.com>
 M:	Heiner Kallweit <hkallweit1@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/ethernet/realtek/r8169.c
+F:	drivers/net/ethernet/realtek/r8169*
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@@ -683,7 +683,7 @@ S:	Maintained
 F:	drivers/crypto/sunxi-ss/
 
 ALLWINNER VPU DRIVER
-M:	Maxime Ripard <maxime.ripard@bootlin.com>
+M:	Maxime Ripard <mripard@kernel.org>
 M:	Paul Kocialkowski <paul.kocialkowski@bootlin.com>
 L:	linux-media@vger.kernel.org
 S:	Maintained
@@ -1408,7 +1408,7 @@ S:	Maintained
 F:	drivers/clk/sunxi/
 
 ARM/Allwinner sunXi SoC support
-M:	Maxime Ripard <maxime.ripard@bootlin.com>
+M:	Maxime Ripard <mripard@kernel.org>
 M:	Chen-Yu Tsai <wens@csie.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -3577,7 +3577,7 @@ F:	Documentation/filesystems/caching/cachefiles.txt
 F:	fs/cachefiles/
 
 CADENCE MIPI-CSI2 BRIDGES
-M:	Maxime Ripard <maxime.ripard@bootlin.com>
+M:	Maxime Ripard <mripard@kernel.org>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/media/cdns,*.txt
@@ -5295,7 +5295,7 @@ F:	include/linux/vga*
 
 DRM DRIVERS AND MISC GPU PATCHES
 M:	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-M:	Maxime Ripard <maxime.ripard@bootlin.com>
+M:	Maxime Ripard <mripard@kernel.org>
 M:	Sean Paul <sean@poorly.run>
 W:	https://01.org/linuxgraphics/gfx-docs/maintainer-tools/drm-misc.html
 S:	Maintained
@@ -5308,7 +5308,7 @@ F:	include/uapi/drm/drm*
 F:	include/linux/vga*
 
 DRM DRIVERS FOR ALLWINNER A10
-M:	Maxime Ripard  <maxime.ripard@bootlin.com>
+M:	Maxime Ripard <mripard@kernel.org>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
 F:	drivers/gpu/drm/sun4i/
@@ -6065,7 +6065,7 @@ M:	Florian Fainelli <f.fainelli@gmail.com>
 M:	Heiner Kallweit <hkallweit1@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	Documentation/ABI/testing/sysfs-bus-mdio
+F:	Documentation/ABI/testing/sysfs-class-net-phydev
 F:	Documentation/devicetree/bindings/net/ethernet-phy.yaml
 F:	Documentation/devicetree/bindings/net/mdio*
 F:	Documentation/networking/phy.rst
@@ -7513,7 +7513,7 @@ I2C MV64XXX MARVELL AND ALLWINNER DRIVER
 M:	Gregory CLEMENT <gregory.clement@bootlin.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+F:	Documentation/devicetree/bindings/i2c/marvell,mv64xxx-i2c.yaml
 F:	drivers/i2c/busses/i2c-mv64xxx.c
 
 I2C OVER PARALLEL PORT
@@ -8454,11 +8454,6 @@ S:	Maintained
 F:	fs/io_uring.c
 F:	include/uapi/linux/io_uring.h
 
-IP MASQUERADING
-M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
-S:	Maintained
-F:	net/ipv4/netfilter/ipt_MASQUERADE.c
-
 IPMI SUBSYSTEM
 M:	Corey Minyard <minyard@acm.org>
 L:	openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
@@ -8832,14 +8827,6 @@ F:	virt/kvm/*
 F:	tools/kvm/
 F:	tools/testing/selftests/kvm/
 
-KERNEL VIRTUAL MACHINE FOR AMD-V (KVM/amd)
-M:	Joerg Roedel <joro@8bytes.org>
-L:	kvm@vger.kernel.org
-W:	http://www.linux-kvm.org/
-S:	Maintained
-F:	arch/x86/include/asm/svm.h
-F:	arch/x86/kvm/svm.c
-
 KERNEL VIRTUAL MACHINE FOR ARM/ARM64 (KVM/arm, KVM/arm64)
 M:	Marc Zyngier <maz@kernel.org>
 R:	James Morse <james.morse@arm.com>
@@ -8882,7 +8869,7 @@ M:	Christian Borntraeger <borntraeger@de.ibm.com>
 M:	Janosch Frank <frankja@linux.ibm.com>
 R:	David Hildenbrand <david@redhat.com>
 R:	Cornelia Huck <cohuck@redhat.com>
-L:	linux-s390@vger.kernel.org
+L:	kvm@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux.git
 S:	Supported
@@ -8897,6 +8884,11 @@ F:	tools/testing/selftests/kvm/*/s390x/
 KERNEL VIRTUAL MACHINE FOR X86 (KVM/x86)
 M:	Paolo Bonzini <pbonzini@redhat.com>
 M:	Radim Krčmář <rkrcmar@redhat.com>
+R:	Sean Christopherson <sean.j.christopherson@intel.com>
+R:	Vitaly Kuznetsov <vkuznets@redhat.com>
+R:	Wanpeng Li <wanpengli@tencent.com>
+R:	Jim Mattson <jmattson@google.com>
+R:	Joerg Roedel <joro@8bytes.org>
 L:	kvm@vger.kernel.org
 W:	http://www.linux-kvm.org
 T:	git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
@@ -8904,8 +8896,12 @@ S:	Supported
 F:	arch/x86/kvm/
 F:	arch/x86/kvm/*/
 F:	arch/x86/include/uapi/asm/kvm*
+F:	arch/x86/include/uapi/asm/vmx.h
+F:	arch/x86/include/uapi/asm/svm.h
 F:	arch/x86/include/asm/kvm*
 F:	arch/x86/include/asm/pvclock-abi.h
+F:	arch/x86/include/asm/svm.h
+F:	arch/x86/include/asm/vmx.h
 F:	arch/x86/kernel/kvm.c
 F:	arch/x86/kernel/kvmclock.c
 
@@ -9233,6 +9229,18 @@ F:	include/linux/nd.h
 F:	include/linux/libnvdimm.h
 F:	include/uapi/linux/ndctl.h
 
+LICENSES and SPDX stuff
+M:	Thomas Gleixner <tglx@linutronix.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+L:	linux-spdx@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx.git
+F:	COPYING
+F:	Documentation/process/license-rules.rst
+F:	LICENSES/
+F:	scripts/spdxcheck-test.sh
+F:	scripts/spdxcheck.py
+
 LIGHTNVM PLATFORM SUPPORT
 M:	Matias Bjorling <mb@lightnvm.io>
 W:	http://github/OpenChannelSSD
@@ -11085,7 +11093,7 @@ NET_FAILOVER MODULE
 M:	Sridhar Samudrala <sridhar.samudrala@intel.com>
 L:	netdev@vger.kernel.org
 S:	Supported
-F:	driver/net/net_failover.c
+F:	drivers/net/net_failover.c
 F:	include/net/net_failover.h
 F:	Documentation/networking/net_failover.rst
 
@@ -14477,6 +14485,7 @@ F:	drivers/net/phy/phylink.c
 F:	drivers/net/phy/sfp*
 F:	include/linux/phylink.h
 F:	include/linux/sfp.h
+K:	phylink
 
 SGI GRU DRIVER
 M:	Dimitri Sivanich <sivanich@sgi.com>
@@ -14882,9 +14891,9 @@ F:	include/linux/arm_sdei.h
 F:	include/uapi/linux/arm_sdei.h
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
-M:	Shaohua Li <shli@kernel.org>
+M:	Song Liu <song@kernel.org>
 L:	linux-raid@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shli/md.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/song/md.git
 S:	Supported
 F:	drivers/md/Makefile
 F:	drivers/md/Kconfig

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc8
 NAME = Bobtail Squid
 
 # *DOCUMENTATION*

arch/arc/boot/dts/Makefile

@@ -12,3 +12,6 @@ dtb-y := $(builtindtb-y).dtb
 # for CONFIG_OF_ALL_DTBS test
 dtstree	:= $(srctree)/$(src)
 dtb-	:= $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts))
+
+# board-specific dtc flags
+DTC_FLAGS_hsdk += --pad 20

arch/arc/include/asm/entry-arcv2.h

@@ -256,7 +256,7 @@
 
 .macro FAKE_RET_FROM_EXCPN
 	lr      r9, [status32]
-	bic     r9, r9, (STATUS_U_MASK|STATUS_DE_MASK|STATUS_AE_MASK)
+	bic     r9, r9, STATUS_AE_MASK
 	or      r9, r9, STATUS_IE_MASK
 	kflag   r9
 .endm

arch/arc/include/asm/linkage.h

@@ -62,15 +62,15 @@
 #else	/* !__ASSEMBLY__ */
 
 #ifdef CONFIG_ARC_HAS_ICCM
-#define __arcfp_code __attribute__((__section__(".text.arcfp")))
+#define __arcfp_code __section(.text.arcfp)
 #else
-#define __arcfp_code __attribute__((__section__(".text")))
+#define __arcfp_code __section(.text)
 #endif
 
 #ifdef CONFIG_ARC_HAS_DCCM
-#define __arcfp_data __attribute__((__section__(".data.arcfp")))
+#define __arcfp_data __section(.data.arcfp)
 #else
-#define __arcfp_data __attribute__((__section__(".data")))
+#define __arcfp_data __section(.data)
 #endif
 
 #endif /* __ASSEMBLY__ */

arch/arc/include/asm/mach_desc.h

@@ -53,8 +53,7 @@ extern const struct machine_desc __arch_info_begin[], __arch_info_end[];
  */
 #define MACHINE_START(_type, _name)			\
 static const struct machine_desc __mach_desc_##_type	\
-__used							\
+__used __section(.arch.info.init) = {			\
-__attribute__((__section__(".arch.info.init"))) = {	\
 	.name		= _name,
 
 #define MACHINE_END				\

arch/arc/kernel/mcip.c

@@ -202,8 +202,8 @@ static void idu_set_dest(unsigned int cmn_irq, unsigned int cpu_mask)
 	__mcip_cmd_data(CMD_IDU_SET_DEST, cmn_irq, cpu_mask);
 }
 
-static void idu_set_mode(unsigned int cmn_irq, unsigned int lvl,
+static void idu_set_mode(unsigned int cmn_irq, bool set_lvl, unsigned int lvl,
-			   unsigned int distr)
+			 bool set_distr, unsigned int distr)
 {
 	union {
 		unsigned int word;
@@ -212,7 +212,10 @@ static void idu_set_mode(unsigned int cmn_irq, unsigned int lvl,
 		};
 	} data;
 
+	data.word = __mcip_cmd_read(CMD_IDU_READ_MODE, cmn_irq);
+	if (set_distr)
 		data.distr = distr;
+	if (set_lvl)
 		data.lvl = lvl;
 	__mcip_cmd_data(CMD_IDU_SET_MODE, cmn_irq, data.word);
 }
@@ -240,6 +243,25 @@ static void idu_irq_unmask(struct irq_data *data)
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
 }
 
+static void idu_irq_ack(struct irq_data *data)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+	__mcip_cmd(CMD_IDU_ACK_CIRQ, data->hwirq);
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
+static void idu_irq_mask_ack(struct irq_data *data)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+	__mcip_cmd_data(CMD_IDU_SET_MASK, data->hwirq, 1);
+	__mcip_cmd(CMD_IDU_ACK_CIRQ, data->hwirq);
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
 static int
 idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
 		     bool force)
@@ -263,13 +285,36 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
 	else
 		distribution_mode = IDU_M_DISTRI_RR;
 
-	idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, distribution_mode);
+	idu_set_mode(data->hwirq, false, 0, true, distribution_mode);
 
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
 
 	return IRQ_SET_MASK_OK;
 }
 
+static int idu_irq_set_type(struct irq_data *data, u32 type)
+{
+	unsigned long flags;
+
+	/*
+	 * ARCv2 IDU HW does not support inverse polarity, so these are the
+	 * only interrupt types supported.
+	 */
+	if (type & ~(IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH))
+		return -EINVAL;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	idu_set_mode(data->hwirq, true,
+		     type & IRQ_TYPE_EDGE_RISING ? IDU_M_TRIG_EDGE :
+						   IDU_M_TRIG_LEVEL,
+		     false, 0);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+
+	return 0;
+}
+
 static void idu_irq_enable(struct irq_data *data)
 {
 	/*
@@ -289,7 +334,10 @@ static struct irq_chip idu_irq_chip = {
 	.name			= "MCIP IDU Intc",
 	.irq_mask		= idu_irq_mask,
 	.irq_unmask		= idu_irq_unmask,
+	.irq_ack		= idu_irq_ack,
+	.irq_mask_ack		= idu_irq_mask_ack,
 	.irq_enable		= idu_irq_enable,
+	.irq_set_type		= idu_irq_set_type,
 #ifdef CONFIG_SMP
 	.irq_set_affinity       = idu_irq_set_affinity,
 #endif
@@ -317,7 +365,7 @@ static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t
 }
 
 static const struct irq_domain_ops idu_irq_ops = {
-	.xlate	= irq_domain_xlate_onecell,
+	.xlate	= irq_domain_xlate_onetwocell,
 	.map	= idu_irq_map,
 };
 

arch/arc/kernel/unwind.c

@@ -572,6 +572,7 @@ static unsigned long read_pointer(const u8 **pLoc, const void *end,
 #else
 		BUILD_BUG_ON(sizeof(u32) != sizeof(value));
 #endif
+		/* Fall through */
 	case DW_EH_PE_native:
 		if (end < (const void *)(ptr.pul + 1))
 			return 0;
@@ -826,7 +827,7 @@ static int processCFI(const u8 *start, const u8 *end, unsigned long targetLoc,
 			case DW_CFA_def_cfa:
 				state->cfa.reg = get_uleb128(&ptr.p8, end);
 				unw_debug("cfa_def_cfa: r%lu ", state->cfa.reg);
-				/*nobreak*/
+				/* fall through */
 			case DW_CFA_def_cfa_offset:
 				state->cfa.offs = get_uleb128(&ptr.p8, end);
 				unw_debug("cfa_def_cfa_offset: 0x%lx ",
@@ -834,7 +835,7 @@ static int processCFI(const u8 *start, const u8 *end, unsigned long targetLoc,
 				break;
 			case DW_CFA_def_cfa_sf:
 				state->cfa.reg = get_uleb128(&ptr.p8, end);
-				/*nobreak */
+				/* fall through */
 			case DW_CFA_def_cfa_offset_sf:
 				state->cfa.offs = get_sleb128(&ptr.p8, end)
 				    * state->dataAlign;

arch/arc/mm/dma.c

@@ -101,7 +101,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 	if (is_isa_arcv2() && ioc_enable && coherent)
 		dev->dma_coherent = true;
 
-	dev_info(dev, "use %sncoherent DMA ops\n",
+	dev_info(dev, "use %scoherent DMA ops\n",
 		 dev->dma_coherent ? "" : "non");
 }
 

arch/arc/plat-hsdk/platform.c

@@ -6,11 +6,15 @@
  */
 
 #include <linux/init.h>
+#include <linux/of_fdt.h>
+#include <linux/libfdt.h>
 #include <linux/smp.h>
 #include <asm/arcregs.h>
 #include <asm/io.h>
 #include <asm/mach_desc.h>
 
+int arc_hsdk_axi_dmac_coherent __section(.data) = 0;
+
 #define ARC_CCM_UNUSED_ADDR	0x60000000
 
 static void __init hsdk_init_per_cpu(unsigned int cpu)
@@ -97,6 +101,42 @@ static void __init hsdk_enable_gpio_intc_wire(void)
 	iowrite32(GPIO_INT_CONNECTED_MASK, (void __iomem *) GPIO_INTEN);
 }
 
+static int __init hsdk_tweak_node_coherency(const char *path, bool coherent)
+{
+	void *fdt = initial_boot_params;
+	const void *prop;
+	int node, ret;
+	bool dt_coh_set;
+
+	node = fdt_path_offset(fdt, path);
+	if (node < 0)
+		goto tweak_fail;
+
+	prop = fdt_getprop(fdt, node, "dma-coherent", &ret);
+	if (!prop && ret != -FDT_ERR_NOTFOUND)
+		goto tweak_fail;
+
+	dt_coh_set = ret != -FDT_ERR_NOTFOUND;
+	ret = 0;
+
+	/* need to remove "dma-coherent" property */
+	if (dt_coh_set && !coherent)
+		ret = fdt_delprop(fdt, node, "dma-coherent");
+
+	/* need to set "dma-coherent" property */
+	if (!dt_coh_set && coherent)
+		ret = fdt_setprop(fdt, node, "dma-coherent", NULL, 0);
+
+	if (ret < 0)
+		goto tweak_fail;
+
+	return 0;
+
+tweak_fail:
+	pr_err("failed to tweak %s to %scoherent\n", path, coherent ? "" : "non");
+	return -EFAULT;
+}
+
 enum hsdk_axi_masters {
 	M_HS_CORE = 0,
 	M_HS_RTT,
@@ -162,6 +202,39 @@ enum hsdk_axi_masters {
 #define CREG_PAE		((void __iomem *)(CREG_BASE + 0x180))
 #define CREG_PAE_UPDT		((void __iomem *)(CREG_BASE + 0x194))
 
+static void __init hsdk_init_memory_bridge_axi_dmac(void)
+{
+	bool coherent = !!arc_hsdk_axi_dmac_coherent;
+	u32 axi_m_slv1, axi_m_oft1;
+
+	/*
+	 * Don't tweak memory bridge configuration if we failed to tweak DTB
+	 * as we will end up in a inconsistent state.
+	 */
+	if (hsdk_tweak_node_coherency("/soc/dmac@80000", coherent))
+		return;
+
+	if (coherent) {
+		axi_m_slv1 = 0x77999999;
+		axi_m_oft1 = 0x76DCBA98;
+	} else {
+		axi_m_slv1 = 0x77777777;
+		axi_m_oft1 = 0x76543210;
+	}
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_0));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_0));
+	writel(axi_m_slv1, CREG_AXI_M_SLV1(M_DMAC_0));
+	writel(axi_m_oft1, CREG_AXI_M_OFT1(M_DMAC_0));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_0));
+
+	writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_1));
+	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_1));
+	writel(axi_m_slv1, CREG_AXI_M_SLV1(M_DMAC_1));
+	writel(axi_m_oft1, CREG_AXI_M_OFT1(M_DMAC_1));
+	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_1));
+}
+
 static void __init hsdk_init_memory_bridge(void)
 {
 	u32 reg;
@@ -227,24 +300,14 @@ static void __init hsdk_init_memory_bridge(void)
 	writel(0x76543210, CREG_AXI_M_OFT1(M_GPU));
 	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_GPU));
 
-	writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_0));
-	writel(0x77777777, CREG_AXI_M_SLV1(M_DMAC_0));
-	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_0));
-	writel(0x76543210, CREG_AXI_M_OFT1(M_DMAC_0));
-	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_0));
-
-	writel(0x77777777, CREG_AXI_M_SLV0(M_DMAC_1));
-	writel(0x77777777, CREG_AXI_M_SLV1(M_DMAC_1));
-	writel(0xFEDCBA98, CREG_AXI_M_OFT0(M_DMAC_1));
-	writel(0x76543210, CREG_AXI_M_OFT1(M_DMAC_1));
-	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DMAC_1));
-
 	writel(0x00000000, CREG_AXI_M_SLV0(M_DVFS));
 	writel(0x60000000, CREG_AXI_M_SLV1(M_DVFS));
 	writel(0x00000000, CREG_AXI_M_OFT0(M_DVFS));
 	writel(0x00000000, CREG_AXI_M_OFT1(M_DVFS));
 	writel(UPDATE_VAL, CREG_AXI_M_UPDT(M_DVFS));
 
+	hsdk_init_memory_bridge_axi_dmac();
+
 	/*
 	 * PAE remapping for DMA clients does not work due to an RTL bug, so
 	 * CREG_PAE register must be programmed to all zeroes, otherwise it

arch/arm/Kconfig

@@ -7,6 +7,8 @@ config ARM
 	select ARCH_HAS_BINFMT_FLAT
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
+	select ARCH_HAS_DMA_COHERENT_TO_PFN if SWIOTLB
+	select ARCH_HAS_DMA_MMAP_PGPROT if SWIOTLB
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_FORTIFY_SOURCE
 	select ARCH_HAS_KEEPINITRD
@@ -18,6 +20,8 @@ config ARM
 	select ARCH_HAS_SET_MEMORY
 	select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
 	select ARCH_HAS_STRICT_MODULE_RWX if MMU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE if SWIOTLB
+	select ARCH_HAS_SYNC_DMA_FOR_CPU if SWIOTLB
 	select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAVE_CUSTOM_GPIO_H

arch/arm/boot/dts/am33xx-l4.dtsi

@@ -185,7 +185,7 @@
 			uart0: serial@0 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				clock-frequency = <48000000>;
-				reg = <0x0 0x2000>;
+				reg = <0x0 0x1000>;
 				interrupts = <72>;
 				status = "disabled";
 				dmas = <&edma 26 0>, <&edma 27 0>;
@@ -934,7 +934,7 @@
 			uart1: serial@0 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				clock-frequency = <48000000>;
-				reg = <0x0 0x2000>;
+				reg = <0x0 0x1000>;
 				interrupts = <73>;
 				status = "disabled";
 				dmas = <&edma 28 0>, <&edma 29 0>;
@@ -966,7 +966,7 @@
 			uart2: serial@0 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				clock-frequency = <48000000>;
-				reg = <0x0 0x2000>;
+				reg = <0x0 0x1000>;
 				interrupts = <74>;
 				status = "disabled";
 				dmas = <&edma 30 0>, <&edma 31 0>;
@@ -1614,7 +1614,7 @@
 			uart3: serial@0 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				clock-frequency = <48000000>;
-				reg = <0x0 0x2000>;
+				reg = <0x0 0x1000>;
 				interrupts = <44>;
 				status = "disabled";
 			};
@@ -1644,7 +1644,7 @@
 			uart4: serial@0 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				clock-frequency = <48000000>;
-				reg = <0x0 0x2000>;
+				reg = <0x0 0x1000>;
 				interrupts = <45>;
 				status = "disabled";
 			};
@@ -1674,7 +1674,7 @@
 			uart5: serial@0 {
 				compatible = "ti,am3352-uart", "ti,omap3-uart";
 				clock-frequency = <48000000>;
-				reg = <0x0 0x2000>;
+				reg = <0x0 0x1000>;
 				interrupts = <46>;
 				status = "disabled";
 			};
@@ -1758,6 +1758,8 @@
 
 		target-module@cc000 {			/* 0x481cc000, ap 60 46.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xcc020 0x4>;
+			reg-names = "rev";
 			ti,hwmods = "d_can0";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
@@ -1780,6 +1782,8 @@
 
 		target-module@d0000 {			/* 0x481d0000, ap 62 42.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd0020 0x4>;
+			reg-names = "rev";
 			ti,hwmods = "d_can1";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,

arch/arm/boot/dts/am33xx.dtsi

@@ -234,13 +234,33 @@
 			interrupt-names = "edma3_tcerrint";
 		};
 
-		mmc3: mmc@47810000 {
+		target-module@47810000 {
-			compatible = "ti,omap4-hsmmc";
+			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "mmc3";
+			reg = <0x478102fc 0x4>,
+			      <0x47810110 0x4>,
+			      <0x47810114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x47810000 0x1000>;
+
+			mmc3: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
 				ti,needs-special-reset;
 				interrupts = <29>;
-			reg = <0x47810000 0x1000>;
+				reg = <0x0 0x1000>;
-			status = "disabled";
+			};
 		};
 
 		usb: usb@47400000 {

arch/arm/boot/dts/am4372.dtsi

@@ -228,13 +228,33 @@
 			interrupt-names = "edma3_tcerrint";
 		};
 
-		mmc3: mmc@47810000 {
+		target-module@47810000 {
-			compatible = "ti,omap4-hsmmc";
+			compatible = "ti,sysc-omap2", "ti,sysc";
-			reg = <0x47810000 0x1000>;
 			ti,hwmods = "mmc3";
+			reg = <0x478102fc 0x4>,
+			      <0x47810110 0x4>,
+			      <0x47810114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x47810000 0x1000>;
+
+			mmc3: mmc@0 {
+				compatible = "ti,omap4-hsmmc";
 				ti,needs-special-reset;
 				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
+				reg = <0x0 0x1000>;
+			};
 		};
 
 		sham: sham@53100000 {

arch/arm/boot/dts/am437x-l4.dtsi

@@ -1574,6 +1574,8 @@
 
 		target-module@cc000 {			/* 0x481cc000, ap 50 46.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xcc020 0x4>;
+			reg-names = "rev";
 			ti,hwmods = "d_can0";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
@@ -1593,6 +1595,8 @@
 
 		target-module@d0000 {			/* 0x481d0000, ap 52 3a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd0020 0x4>;
+			reg-names = "rev";
 			ti,hwmods = "d_can1";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
 			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;

arch/arm/boot/dts/am571x-idk.dts

@@ -175,14 +175,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 };
 
 &mmc2 {

arch/arm/boot/dts/am572x-idk.dts

@@ -16,14 +16,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 };
 
 &mmc2 {

arch/arm/boot/dts/am574x-idk.dts

@@ -24,14 +24,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_default>;
-	pinctrl-3 = <&mmc1_pins_hs>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_conf>;
-	pinctrl-6 = <&mmc1_pins_ddr50 &mmc1_iodelay_sdr104_conf>;
 };
 
 &mmc2 {

arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

@@ -379,7 +379,7 @@
 	};
 };
 
-&gpio7 {
+&gpio7_target {
 	ti,no-reset-on-init;
 	ti,no-idle-on-init;
 };
@@ -430,6 +430,7 @@
 
 	bus-width = <4>;
 	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+	no-1-8-v;
 };
 
 &mmc2 {

arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts

@@ -16,14 +16,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
 	vmmc-supply = <&vdd_3v3>;
 	vqmmc-supply = <&ldo1_reg>;
 };

arch/arm/boot/dts/am57xx-beagle-x15-revc.dts

@@ -16,14 +16,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 	vmmc-supply = <&vdd_3v3>;
 	vqmmc-supply = <&ldo1_reg>;
 };

arch/arm/boot/dts/dra7-evm.dts

@@ -498,7 +498,7 @@
 	phy-supply = <&ldousb_reg>;
 };
 
-&gpio7 {
+&gpio7_target {
 	ti,no-reset-on-init;
 	ti,no-idle-on-init;
 };

arch/arm/boot/dts/dra7-l4.dtsi

@@ -1261,7 +1261,7 @@
 			};
 		};
 
-		target-module@51000 {			/* 0x48051000, ap 45 2e.0 */
+		gpio7_target: target-module@51000 {		/* 0x48051000, ap 45 2e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			ti,hwmods = "gpio7";
 			reg = <0x51000 0x4>,
@@ -3025,7 +3025,7 @@
 
 		target-module@80000 {			/* 0x48480000, ap 31 16.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0x80000 0x4>;
+			reg = <0x80020 0x4>;
 			reg-names = "rev";
 			clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>;
 			clock-names = "fck";
@@ -4577,7 +4577,7 @@
 
 		target-module@c000 {			/* 0x4ae3c000, ap 30 04.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			reg = <0xc000 0x4>;
+			reg = <0xc020 0x4>;
 			reg-names = "rev";
 			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>;
 			clock-names = "fck";

arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi

@@ -32,7 +32,7 @@
  *
  * Datamanual Revisions:
  *
- * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016
+ * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019
  * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
  *
  */
@@ -229,45 +229,45 @@
 
 	mmc3_pins_default: mmc3_pins_default {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_hs: mmc3_pins_hs {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_sdr12: mmc3_pins_sdr12 {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_sdr25: mmc3_pins_sdr25 {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 

arch/arm/boot/dts/vf610-bk4.dts

@@ -246,13 +246,13 @@
 		reg = <0>;
 	};
 
-	n25q128a13_2: flash@1 {
+	n25q128a13_2: flash@2 {
 		compatible = "n25q128a13", "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		spi-max-frequency = <66000000>;
 		spi-rx-bus-width = <2>;
-		reg = <1>;
+		reg = <2>;
 	};
 };
 

arch/arm/lib/backtrace.S

@@ -66,7 +66,7 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 
 1003:		ldr	r2, [sv_pc, #-4]	@ if stmfd sp!, {args} exists,
 		ldr	r3, .Ldsi+4		@ adjust saved 'pc' back one
-		teq	r3, r2, lsr #10		@ instruction
+		teq	r3, r2, lsr #11		@ instruction
 		subne	r0, sv_pc, #4		@ allow for mov
 		subeq	r0, sv_pc, #8		@ allow for mov + stmia
 

arch/arm/mach-omap1/ams-delta-fiq-handler.S

@@ -126,6 +126,8 @@ restart:
 	orr r11, r11, r13			@ mask all requested interrupts
 	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
 
+	str r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack all requested interrupts
+
 	ands r10, r13, #KEYBRD_CLK_MASK		@ extract keyboard status - set?
 	beq hksw				@ no - try next source
 
@@ -133,7 +135,6 @@ restart:
 	@@@@@@@@@@@@@@@@@@@@@@
 	@ Keyboard clock FIQ mode interrupt handler
 	@ r10 now contains KEYBRD_CLK_MASK, use it
-	str r10, [r12, #OMAP1510_GPIO_INT_STATUS]	@ ack the interrupt
 	bic r11, r11, r10				@ unmask it
 	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
 

arch/arm/mach-omap1/ams-delta-fiq.c

@@ -70,9 +70,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id)
 			 * interrupts default to since commit 80ac93c27441
 			 * requires interrupt already acked and unmasked.
 			 */
-			if (irq_chip->irq_ack)
+			if (!WARN_ON_ONCE(!irq_chip->irq_unmask))
-				irq_chip->irq_ack(d);
-			if (irq_chip->irq_unmask)
 				irq_chip->irq_unmask(d);
 		}
 		for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++)

arch/arm/mach-omap2/omap4-common.c

@@ -127,6 +127,9 @@ static int __init omap4_sram_init(void)
 	struct device_node *np;
 	struct gen_pool *sram_pool;
 
+	if (!soc_is_omap44xx() && !soc_is_omap54xx())
+		return 0;
+
 	np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
 	if (!np)
 		pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",

arch/arm/mach-omap2/omap_hwmod_7xx_data.c

@@ -379,7 +379,8 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = {
 static struct omap_hwmod_class_sysconfig dra7xx_epwmss_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x4,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_RESET_STATUS,
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type2,
 };

arch/arm/mach-rpc/riscpc.c

@@ -46,6 +46,7 @@ static int __init parse_tag_acorn(const struct tag *tag)
 	switch (tag->u.acorn.vram_pages) {
 	case 512:
 		vram_size += PAGE_SIZE * 256;
+		/* Fall through - ??? */
 	case 256:
 		vram_size += PAGE_SIZE * 256;
 	default:

arch/arm/mm/Kconfig

@@ -664,10 +664,6 @@ config ARM_LPAE
 		!CPU_32v4 && !CPU_32v3
 	select PHYS_ADDR_T_64BIT
 	select SWIOTLB
-	select ARCH_HAS_DMA_COHERENT_TO_PFN
-	select ARCH_HAS_DMA_MMAP_PGPROT
-	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
-	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	help
 	  Say Y if you have an ARMv7 processor supporting the LPAE page
 	  table format and you would like to access memory beyond the

arch/arm/mm/init.c

@@ -175,6 +175,11 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max_low,
 #ifdef CONFIG_HAVE_ARCH_PFN_VALID
 int pfn_valid(unsigned long pfn)
 {
+	phys_addr_t addr = __pfn_to_phys(pfn);
+
+	if (__phys_to_pfn(addr) != pfn)
+		return 0;
+
 	return memblock_is_map_memory(__pfn_to_phys(pfn));
 }
 EXPORT_SYMBOL(pfn_valid);
@@ -628,6 +633,7 @@ static void update_sections_early(struct section_perm perms[], int n)
 		if (t->flags & PF_KTHREAD)
 			continue;
 		for_each_thread(t, s)
+			if (s->mm)
 				set_section_perms(perms, n, true, s->mm);
 	}
 	set_section_perms(perms, n, true, current->active_mm);

arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts

@@ -339,6 +339,12 @@
 	pinctrl-names = "default";
 };
 
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
 &pwm_ef {
 	status = "okay";
 	pinctrl-0 = <&pwm_e_pins>;

arch/arm64/boot/dts/amlogic/meson-g12a.dtsi

@@ -2386,6 +2386,7 @@
 				clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
 				clock-names = "ddr";
 				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
 				dr_mode = "peripheral";
 				g-rx-fifo-size = <192>;
 				g-np-tx-fifo-size = <128>;

arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts

@@ -53,6 +53,7 @@
 
 		gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		regulator-always-on;
 	};
 
 	tf_io: gpio-regulator-tf_io {

arch/arm64/boot/dts/renesas/hihope-common.dtsi

@@ -279,6 +279,7 @@
 	mmc-hs200-1_8v;
 	non-removable;
 	fixed-emmc-driver-type = <1>;
+	status = "okay";
 };
 
 &usb_extal_clk {

arch/arm64/boot/dts/renesas/r8a77995-draak.dts

@@ -97,7 +97,7 @@
 		reg = <0x0 0x48000000 0x0 0x18000000>;
 	};
 
-	reg_1p8v: regulator0 {
+	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
 		regulator-min-microvolt = <1800000>;
@@ -106,7 +106,7 @@
 		regulator-always-on;
 	};
 
-	reg_3p3v: regulator1 {
+	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -115,7 +115,7 @@
 		regulator-always-on;
 	};
 
-	reg_12p0v: regulator1 {
+	reg_12p0v: regulator-12p0v {
 		compatible = "regulator-fixed";
 		regulator-name = "D12.0V";
 		regulator-min-microvolt = <12000000>;

arch/mips/include/asm/octeon/cvmx-sli-defs.h

@@ -46,6 +46,7 @@ static inline uint64_t CVMX_SLI_PCIE_MSI_RCV_FUNC(void)
 	case OCTEON_CN78XX & OCTEON_FAMILY_MASK:
 		if (OCTEON_IS_MODEL(OCTEON_CN78XX_PASS1_X))
 			return 0x0000000000003CB0ull;
+		/* Else, fall through */
 	default:
 		return 0x0000000000023CB0ull;
 	}

arch/nds32/kernel/signal.c

@@ -316,6 +316,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 				regs->uregs[0] = -EINTR;
 				break;
 			}
+			/* Else, fall through */
 		case -ERESTARTNOINTR:
 			regs->uregs[0] = regs->orig_r0;
 			regs->ipc -= 4;
@@ -360,6 +361,7 @@ static void do_signal(struct pt_regs *regs)
 		switch (regs->uregs[0]) {
 		case -ERESTART_RESTARTBLOCK:
 			regs->uregs[15] = __NR_restart_syscall;
+			/* Fall through */
 		case -ERESTARTNOHAND:
 		case -ERESTARTSYS:
 		case -ERESTARTNOINTR:

arch/parisc/include/asm/pgtable.h

@@ -2,6 +2,7 @@
 #ifndef _PARISC_PGTABLE_H
 #define _PARISC_PGTABLE_H
 
+#include <asm/page.h>
 #include <asm-generic/4level-fixup.h>
 
 #include <asm/fixmap.h>
@@ -98,8 +99,6 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
 
 #endif /* !__ASSEMBLY__ */
 
-#include <asm/page.h>
-
 #define pte_ERROR(e) \
 	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
 #define pmd_ERROR(e) \

arch/powerpc/kernel/process.c

@@ -101,21 +101,8 @@ static void check_if_tm_restore_required(struct task_struct *tsk)
 	}
 }
 
-static bool tm_active_with_fp(struct task_struct *tsk)
-{
-	return MSR_TM_ACTIVE(tsk->thread.regs->msr) &&
-		(tsk->thread.ckpt_regs.msr & MSR_FP);
-}
-
-static bool tm_active_with_altivec(struct task_struct *tsk)
-{
-	return MSR_TM_ACTIVE(tsk->thread.regs->msr) &&
-		(tsk->thread.ckpt_regs.msr & MSR_VEC);
-}
 #else
 static inline void check_if_tm_restore_required(struct task_struct *tsk) { }
-static inline bool tm_active_with_fp(struct task_struct *tsk) { return false; }
-static inline bool tm_active_with_altivec(struct task_struct *tsk) { return false; }
 #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
 
 bool strict_msr_control;
@@ -252,7 +239,7 @@ EXPORT_SYMBOL(enable_kernel_fp);
 
 static int restore_fp(struct task_struct *tsk)
 {
-	if (tsk->thread.load_fp || tm_active_with_fp(tsk)) {
+	if (tsk->thread.load_fp) {
 		load_fp_state(&current->thread.fp_state);
 		current->thread.load_fp++;
 		return 1;
@@ -334,8 +321,7 @@ EXPORT_SYMBOL_GPL(flush_altivec_to_thread);
 
 static int restore_altivec(struct task_struct *tsk)
 {
-	if (cpu_has_feature(CPU_FTR_ALTIVEC) &&
+	if (cpu_has_feature(CPU_FTR_ALTIVEC) && (tsk->thread.load_vec)) {
-		(tsk->thread.load_vec || tm_active_with_altivec(tsk))) {
 		load_vr_state(&tsk->thread.vr_state);
 		tsk->thread.used_vr = 1;
 		tsk->thread.load_vec++;
@@ -497,13 +483,14 @@ void giveup_all(struct task_struct *tsk)
 	if (!tsk->thread.regs)
 		return;
 
+	check_if_tm_restore_required(tsk);
+
 	usermsr = tsk->thread.regs->msr;
 
 	if ((usermsr & msr_all_available) == 0)
 		return;
 
 	msr_check_and_set(msr_all_available);
-	check_if_tm_restore_required(tsk);
 
 	WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC)));
 

arch/powerpc/kvm/book3s_64_vio.c

@@ -660,8 +660,10 @@ long kvmppc_h_put_tce_indirect(struct kvm_vcpu *vcpu,
 		}
 		tce = be64_to_cpu(tce);
 
-		if (kvmppc_tce_to_ua(vcpu->kvm, tce, &ua))
+		if (kvmppc_tce_to_ua(vcpu->kvm, tce, &ua)) {
-			return H_PARAMETER;
+			ret = H_PARAMETER;
+			goto unlock_exit;
+		}
 
 		list_for_each_entry_lockless(stit, &stt->iommu_tables, next) {
 			ret = kvmppc_tce_iommu_map(vcpu->kvm, stt,

arch/powerpc/kvm/book3s_64_vio_hv.c

@@ -556,8 +556,10 @@ long kvmppc_rm_h_put_tce_indirect(struct kvm_vcpu *vcpu,
 		unsigned long tce = be64_to_cpu(((u64 *)tces)[i]);
 
 		ua = 0;
-		if (kvmppc_rm_tce_to_ua(vcpu->kvm, tce, &ua, NULL))
+		if (kvmppc_rm_tce_to_ua(vcpu->kvm, tce, &ua, NULL)) {
-			return H_PARAMETER;
+			ret = H_PARAMETER;
+			goto unlock_exit;
+		}
 
 		list_for_each_entry_lockless(stit, &stt->iommu_tables, next) {
 			ret = kvmppc_rm_tce_iommu_map(vcpu->kvm, stt,

arch/powerpc/mm/nohash/tlb.c

@@ -630,7 +630,6 @@ static void early_init_this_mmu(void)
 #ifdef CONFIG_PPC_FSL_BOOK3E
 	if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
 		unsigned int num_cams;
-		int __maybe_unused cpu = smp_processor_id();
 		bool map = true;
 
 		/* use a quarter of the TLBCAM for bolted linear map */

arch/riscv/include/asm/fixmap.h

@@ -30,10 +30,6 @@ enum fixed_addresses {
 	__end_of_fixed_addresses
 };
 
-#define FIXADDR_SIZE		(__end_of_fixed_addresses * PAGE_SIZE)
-#define FIXADDR_TOP		(VMALLOC_START)
-#define FIXADDR_START		(FIXADDR_TOP - FIXADDR_SIZE)
-
 #define FIXMAP_PAGE_IO		PAGE_KERNEL
 
 #define __early_set_fixmap	__set_fixmap

arch/riscv/include/asm/pgtable.h

@@ -420,14 +420,22 @@ static inline void pgtable_cache_init(void)
 #define VMALLOC_END      (PAGE_OFFSET - 1)
 #define VMALLOC_START    (PAGE_OFFSET - VMALLOC_SIZE)
 
+#define FIXADDR_TOP      VMALLOC_START
+#ifdef CONFIG_64BIT
+#define FIXADDR_SIZE     PMD_SIZE
+#else
+#define FIXADDR_SIZE     PGDIR_SIZE
+#endif
+#define FIXADDR_START    (FIXADDR_TOP - FIXADDR_SIZE)
+
 /*
- * Task size is 0x4000000000 for RV64 or 0xb800000 for RV32.
+ * Task size is 0x4000000000 for RV64 or 0x9fc00000 for RV32.
  * Note that PGDIR_SIZE must evenly divide TASK_SIZE.
  */
 #ifdef CONFIG_64BIT
 #define TASK_SIZE (PGDIR_SIZE * PTRS_PER_PGD / 2)
 #else
-#define TASK_SIZE VMALLOC_START
+#define TASK_SIZE FIXADDR_START
 #endif
 
 #include <asm-generic/pgtable.h>

arch/s390/net/bpf_jit_comp.c

@@ -863,7 +863,7 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		break;
 	case BPF_ALU64 | BPF_NEG: /* dst = -dst */
 		/* lcgr %dst,%dst */
-		EMIT4(0xb9130000, dst_reg, dst_reg);
+		EMIT4(0xb9030000, dst_reg, dst_reg);
 		break;
 	/*
 	 * BPF_FROM_BE/LE
@@ -1049,8 +1049,8 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		/* llgf %w1,map.max_entries(%b2) */
 		EMIT6_DISP_LH(0xe3000000, 0x0016, REG_W1, REG_0, BPF_REG_2,
 			      offsetof(struct bpf_array, map.max_entries));
-		/* clgrj %b3,%w1,0xa,label0: if %b3 >= %w1 goto out */
+		/* clrj %b3,%w1,0xa,label0: if (u32)%b3 >= (u32)%w1 goto out */
-		EMIT6_PCREL_LABEL(0xec000000, 0x0065, BPF_REG_3,
+		EMIT6_PCREL_LABEL(0xec000000, 0x0077, BPF_REG_3,
 				  REG_W1, 0, 0xa);
 
 		/*
@@ -1076,8 +1076,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		 *         goto out;
 		 */
 
-		/* sllg %r1,%b3,3: %r1 = index * 8 */
+		/* llgfr %r1,%b3: %r1 = (u32) index */
-		EMIT6_DISP_LH(0xeb000000, 0x000d, REG_1, BPF_REG_3, REG_0, 3);
+		EMIT4(0xb9160000, REG_1, BPF_REG_3);
+		/* sllg %r1,%r1,3: %r1 *= 8 */
+		EMIT6_DISP_LH(0xeb000000, 0x000d, REG_1, REG_1, REG_0, 3);
 		/* lg %r1,prog(%b2,%r1) */
 		EMIT6_DISP_LH(0xe3000000, 0x0004, REG_1, BPF_REG_2,
 			      REG_1, offsetof(struct bpf_array, ptrs));

arch/um/include/shared/timer-internal.h

@@ -34,10 +34,13 @@ static inline void time_travel_set_time(unsigned long long ns)
 	time_travel_time = ns;
 }
 
-static inline void time_travel_set_timer(enum time_travel_timer_mode mode,
+static inline void time_travel_set_timer_mode(enum time_travel_timer_mode mode)
-					 unsigned long long expiry)
 {
 	time_travel_timer_mode = mode;
+}
+
+static inline void time_travel_set_timer_expiry(unsigned long long expiry)
+{
 	time_travel_timer_expiry = expiry;
 }
 #else
@@ -50,8 +53,11 @@ static inline void time_travel_set_time(unsigned long long ns)
 {
 }
 
-static inline void time_travel_set_timer(enum time_travel_timer_mode mode,
+static inline void time_travel_set_timer_mode(enum time_travel_timer_mode mode)
-					 unsigned long long expiry)
+{
+}
+
+static inline void time_travel_set_timer_expiry(unsigned long long expiry)
 {
 }
 

arch/um/kernel/process.c

@@ -213,7 +213,7 @@ static void time_travel_sleep(unsigned long long duration)
 	if (time_travel_timer_mode != TT_TMR_DISABLED ||
 	    time_travel_timer_expiry < next) {
 		if (time_travel_timer_mode == TT_TMR_ONESHOT)
-			time_travel_set_timer(TT_TMR_DISABLED, 0);
+			time_travel_set_timer_mode(TT_TMR_DISABLED);
 		/*
 		 * time_travel_time will be adjusted in the timer
 		 * IRQ handler so it works even when the signal

arch/um/kernel/time.c

@@ -50,7 +50,7 @@ void timer_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
 static int itimer_shutdown(struct clock_event_device *evt)
 {
 	if (time_travel_mode != TT_MODE_OFF)
-		time_travel_set_timer(TT_TMR_DISABLED, 0);
+		time_travel_set_timer_mode(TT_TMR_DISABLED);
 
 	if (time_travel_mode != TT_MODE_INFCPU)
 		os_timer_disable();
@@ -62,9 +62,10 @@ static int itimer_set_periodic(struct clock_event_device *evt)
 {
 	unsigned long long interval = NSEC_PER_SEC / HZ;
 
-	if (time_travel_mode != TT_MODE_OFF)
+	if (time_travel_mode != TT_MODE_OFF) {
-		time_travel_set_timer(TT_TMR_PERIODIC,
+		time_travel_set_timer_mode(TT_TMR_PERIODIC);
-				      time_travel_time + interval);
+		time_travel_set_timer_expiry(time_travel_time + interval);
+	}
 
 	if (time_travel_mode != TT_MODE_INFCPU)
 		os_timer_set_interval(interval);
@@ -77,9 +78,10 @@ static int itimer_next_event(unsigned long delta,
 {
 	delta += 1;
 
-	if (time_travel_mode != TT_MODE_OFF)
+	if (time_travel_mode != TT_MODE_OFF) {
-		time_travel_set_timer(TT_TMR_ONESHOT,
+		time_travel_set_timer_mode(TT_TMR_ONESHOT);
-				      time_travel_time + delta);
+		time_travel_set_timer_expiry(time_travel_time + delta);
+	}
 
 	if (time_travel_mode != TT_MODE_INFCPU)
 		return os_timer_one_shot(delta);

arch/x86/Makefile

@@ -38,6 +38,7 @@ REALMODE_CFLAGS	:= $(M16_CFLAGS) -g -Os -DDISABLE_BRANCH_PROFILING \
 
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -ffreestanding)
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -fno-stack-protector)
+REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -Wno-address-of-packed-member)
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), $(cc_stack_align4))
 export REALMODE_CFLAGS
 

arch/x86/boot/compressed/pgtable_64.c

@@ -72,6 +72,8 @@ static unsigned long find_trampoline_placement(void)
 
 	/* Find the first usable memory region under bios_start. */
 	for (i = boot_params->e820_entries - 1; i >= 0; i--) {
+		unsigned long new = bios_start;
+
 		entry = &boot_params->e820_table[i];
 
 		/* Skip all entries above bios_start. */
@@ -84,15 +86,20 @@ static unsigned long find_trampoline_placement(void)
 
 		/* Adjust bios_start to the end of the entry if needed. */
 		if (bios_start > entry->addr + entry->size)
-			bios_start = entry->addr + entry->size;
+			new = entry->addr + entry->size;
 
 		/* Keep bios_start page-aligned. */
-		bios_start = round_down(bios_start, PAGE_SIZE);
+		new = round_down(new, PAGE_SIZE);
 
 		/* Skip the entry if it's too small. */
-		if (bios_start - TRAMPOLINE_32BIT_SIZE < entry->addr)
+		if (new - TRAMPOLINE_32BIT_SIZE < entry->addr)
 			continue;
 
+		/* Protect against underflow. */
+		if (new - TRAMPOLINE_32BIT_SIZE > bios_start)
+			break;
+
+		bios_start = new;
 		break;
 	}
 

arch/x86/events/amd/ibs.c

@@ -661,10 +661,17 @@ fail:
 
 	throttle = perf_event_overflow(event, &data, &regs);
 out:
-	if (throttle)
+	if (throttle) {
 		perf_ibs_stop(event, 0);
-	else
+	} else {
-		perf_ibs_enable_event(perf_ibs, hwc, period >> 4);
+		period >>= 4;
+
+		if ((ibs_caps & IBS_CAPS_RDWROPCNT) &&
+		    (*config & IBS_OP_CNT_CTL))
+			period |= *config & IBS_OP_CUR_CNT_RAND;
+
+		perf_ibs_enable_event(perf_ibs, hwc, period);
+	}
 
 	perf_event_update_userpage(event);
 

arch/x86/events/core.c

@@ -1236,7 +1236,7 @@ void x86_pmu_enable_event(struct perf_event *event)
  * Add a single event to the PMU.
  *
  * The event is added to the group of enabled events
- * but only if it can be scehduled with existing events.
+ * but only if it can be scheduled with existing events.
  */
 static int x86_pmu_add(struct perf_event *event, int flags)
 {

arch/x86/events/intel/core.c

@@ -3572,6 +3572,11 @@ static u64 bdw_limit_period(struct perf_event *event, u64 left)
 	return left;
 }
 
+static u64 nhm_limit_period(struct perf_event *event, u64 left)
+{
+	return max(left, 32ULL);
+}
+
 PMU_FORMAT_ATTR(event,	"config:0-7"	);
 PMU_FORMAT_ATTR(umask,	"config:8-15"	);
 PMU_FORMAT_ATTR(edge,	"config:18"	);
@@ -4606,6 +4611,7 @@ __init int intel_pmu_init(void)
 		x86_pmu.pebs_constraints = intel_nehalem_pebs_event_constraints;
 		x86_pmu.enable_all = intel_pmu_nhm_enable_all;
 		x86_pmu.extra_regs = intel_nehalem_extra_regs;
+		x86_pmu.limit_period = nhm_limit_period;
 
 		mem_attr = nhm_mem_events_attrs;
 

arch/x86/hyperv/mmu.c

@@ -37,12 +37,14 @@ static inline int fill_gva_list(u64 gva_list[], int offset,
 		 * Lower 12 bits encode the number of additional
 		 * pages to flush (in addition to the 'cur' page).
 		 */
-		if (diff >= HV_TLB_FLUSH_UNIT)
+		if (diff >= HV_TLB_FLUSH_UNIT) {
 			gva_list[gva_n] |= ~PAGE_MASK;
-		else if (diff)
-			gva_list[gva_n] |= (diff - 1) >> PAGE_SHIFT;
-
 			cur += HV_TLB_FLUSH_UNIT;
+		}  else if (diff) {
+			gva_list[gva_n] |= (diff - 1) >> PAGE_SHIFT;
+			cur = end;
+		}
+
 		gva_n++;
 
 	} while (cur < end);

arch/x86/include/asm/bootparam_utils.h

@@ -59,7 +59,6 @@ static void sanitize_boot_params(struct boot_params *boot_params)
 			BOOT_PARAM_PRESERVE(apm_bios_info),
 			BOOT_PARAM_PRESERVE(tboot_addr),
 			BOOT_PARAM_PRESERVE(ist_info),
-			BOOT_PARAM_PRESERVE(acpi_rsdp_addr),
 			BOOT_PARAM_PRESERVE(hd0_info),
 			BOOT_PARAM_PRESERVE(hd1_info),
 			BOOT_PARAM_PRESERVE(sys_desc_table),
@@ -71,6 +70,8 @@ static void sanitize_boot_params(struct boot_params *boot_params)
 			BOOT_PARAM_PRESERVE(eddbuf_entries),
 			BOOT_PARAM_PRESERVE(edd_mbr_sig_buf_entries),
 			BOOT_PARAM_PRESERVE(edd_mbr_sig_buffer),
+			BOOT_PARAM_PRESERVE(secure_boot),
+			BOOT_PARAM_PRESERVE(hdr),
 			BOOT_PARAM_PRESERVE(e820_table),
 			BOOT_PARAM_PRESERVE(eddbuf),
 		};

arch/x86/include/asm/ftrace.h

@@ -16,7 +16,6 @@
 #define HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
 
 #ifndef __ASSEMBLY__
-extern void mcount(void);
 extern atomic_t modifying_ftrace_code;
 extern void __fentry__(void);
 

arch/x86/include/asm/intel-family.h

@@ -11,6 +11,21 @@
  * While adding a new CPUID for a new microarchitecture, add a new
  * group to keep logically sorted out in chronological order. Within
  * that group keep the CPUID for the variants sorted by model number.
+ *
+ * The defined symbol names have the following form:
+ *	INTEL_FAM6{OPTFAMILY}_{MICROARCH}{OPTDIFF}
+ * where:
+ * OPTFAMILY	Describes the family of CPUs that this belongs to. Default
+ *		is assumed to be "_CORE" (and should be omitted). Other values
+ *		currently in use are _ATOM and _XEON_PHI
+ * MICROARCH	Is the code name for the micro-architecture for this core.
+ *		N.B. Not the platform name.
+ * OPTDIFF	If needed, a short string to differentiate by market segment.
+ *		Exact strings here will vary over time. _DESKTOP, _MOBILE, and
+ *		_X (short for Xeon server) should be used when they are
+ *		appropriate.
+ *
+ * The #define line may optionally include a comment including platform names.
  */
 
 #define INTEL_FAM6_CORE_YONAH		0x0E

arch/x86/include/asm/msr-index.h

@@ -381,6 +381,7 @@
 #define MSR_AMD64_PATCH_LEVEL		0x0000008b
 #define MSR_AMD64_TSC_RATIO		0xc0000104
 #define MSR_AMD64_NB_CFG		0xc001001f
+#define MSR_AMD64_CPUID_FN_1		0xc0011004
 #define MSR_AMD64_PATCH_LOADER		0xc0010020
 #define MSR_AMD64_OSVW_ID_LENGTH	0xc0010140
 #define MSR_AMD64_OSVW_STATUS		0xc0010141

arch/x86/include/asm/nospec-branch.h

@@ -192,7 +192,7 @@
 	"    	lfence;\n"					\
 	"       jmp    902b;\n"					\
 	"       .align 16\n"					\
-	"903:	addl   $4, %%esp;\n"				\
+	"903:	lea    4(%%esp), %%esp;\n"			\
 	"       pushl  %[thunk_target];\n"			\
 	"       ret;\n"						\
 	"       .align 16\n"					\

arch/x86/include/asm/perf_event.h

@@ -252,16 +252,20 @@ struct pebs_lbr {
 #define IBSCTL_LVT_OFFSET_VALID		(1ULL<<8)
 #define IBSCTL_LVT_OFFSET_MASK		0x0F
 
-/* ibs fetch bits/masks */
+/* IBS fetch bits/masks */
 #define IBS_FETCH_RAND_EN	(1ULL<<57)
 #define IBS_FETCH_VAL		(1ULL<<49)
 #define IBS_FETCH_ENABLE	(1ULL<<48)
 #define IBS_FETCH_CNT		0xFFFF0000ULL
 #define IBS_FETCH_MAX_CNT	0x0000FFFFULL
 
-/* ibs op bits/masks */
+/*
-/* lower 4 bits of the current count are ignored: */
+ * IBS op bits/masks
-#define IBS_OP_CUR_CNT		(0xFFFF0ULL<<32)
+ * The lower 7 bits of the current count are random bits
+ * preloaded by hardware and ignored in software
+ */
+#define IBS_OP_CUR_CNT		(0xFFF80ULL<<32)
+#define IBS_OP_CUR_CNT_RAND	(0x0007FULL<<32)
 #define IBS_OP_CNT_CTL		(1ULL<<19)
 #define IBS_OP_VAL		(1ULL<<18)
 #define IBS_OP_ENABLE		(1ULL<<17)

arch/x86/include/asm/uaccess.h

@@ -444,8 +444,10 @@ __pu_label:							\
 ({									\
 	int __gu_err;							\
 	__inttype(*(ptr)) __gu_val;					\
+	__typeof__(ptr) __gu_ptr = (ptr);				\
+	__typeof__(size) __gu_size = (size);				\
 	__uaccess_begin_nospec();					\
-	__get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT);	\
+	__get_user_size(__gu_val, __gu_ptr, __gu_size, __gu_err, -EFAULT);	\
 	__uaccess_end();						\
 	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
 	__builtin_expect(__gu_err, 0);					\

arch/x86/kernel/apic/apic.c

@@ -722,7 +722,7 @@ static __initdata unsigned long lapic_cal_pm1, lapic_cal_pm2;
 static __initdata unsigned long lapic_cal_j1, lapic_cal_j2;
 
 /*
- * Temporary interrupt handler.
+ * Temporary interrupt handler and polled calibration function.
  */
 static void __init lapic_cal_handler(struct clock_event_device *dev)
 {
@@ -851,7 +851,8 @@ bool __init apic_needs_pit(void)
 static int __init calibrate_APIC_clock(void)
 {
 	struct clock_event_device *levt = this_cpu_ptr(&lapic_events);
-	void (*real_handler)(struct clock_event_device *dev);
+	u64 tsc_perj = 0, tsc_start = 0;
+	unsigned long jif_start;
 	unsigned long deltaj;
 	long delta, deltatsc;
 	int pm_referenced = 0;
@@ -878,29 +879,65 @@ static int __init calibrate_APIC_clock(void)
 	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
 		    "calibrating APIC timer ...\n");
 
+	/*
+	 * There are platforms w/o global clockevent devices. Instead of
+	 * making the calibration conditional on that, use a polling based
+	 * approach everywhere.
+	 */
 	local_irq_disable();
 
-	/* Replace the global interrupt handler */
-	real_handler = global_clock_event->event_handler;
-	global_clock_event->event_handler = lapic_cal_handler;
-
 	/*
 	 * Setup the APIC counter to maximum. There is no way the lapic
 	 * can underflow in the 100ms detection time frame
 	 */
 	__setup_APIC_LVTT(0xffffffff, 0, 0);
 
-	/* Let the interrupts run */
+	/*
+	 * Methods to terminate the calibration loop:
+	 *  1) Global clockevent if available (jiffies)
+	 *  2) TSC if available and frequency is known
+	 */
+	jif_start = READ_ONCE(jiffies);
+
+	if (tsc_khz) {
+		tsc_start = rdtsc();
+		tsc_perj = div_u64((u64)tsc_khz * 1000, HZ);
+	}
+
+	/*
+	 * Enable interrupts so the tick can fire, if a global
+	 * clockevent device is available
+	 */
 	local_irq_enable();
 
-	while (lapic_cal_loops <= LAPIC_CAL_LOOPS)
+	while (lapic_cal_loops <= LAPIC_CAL_LOOPS) {
+		/* Wait for a tick to elapse */
+		while (1) {
+			if (tsc_khz) {
+				u64 tsc_now = rdtsc();
+				if ((tsc_now - tsc_start) >= tsc_perj) {
+					tsc_start += tsc_perj;
+					break;
+				}
+			} else {
+				unsigned long jif_now = READ_ONCE(jiffies);
+
+				if (time_after(jif_now, jif_start)) {
+					jif_start = jif_now;
+					break;
+				}
+			}
 			cpu_relax();
+		}
+
+		/* Invoke the calibration routine */
+		local_irq_disable();
+		lapic_cal_handler(NULL);
+		local_irq_enable();
+	}
 
 	local_irq_disable();
 
-	/* Restore the real event handler */
-	global_clock_event->event_handler = real_handler;
-
 	/* Build delta t1-t2 as apic timer counts down */
 	delta = lapic_cal_t1 - lapic_cal_t2;
 	apic_printk(APIC_VERBOSE, "... lapic delta = %ld\n", delta);
@@ -943,10 +980,11 @@ static int __init calibrate_APIC_clock(void)
 	levt->features &= ~CLOCK_EVT_FEAT_DUMMY;
 
 	/*
-	 * PM timer calibration failed or not turned on
+	 * PM timer calibration failed or not turned on so lets try APIC
-	 * so lets try APIC timer based calibration
+	 * timer based calibration, if a global clockevent device is
+	 * available.
 	 */
-	if (!pm_referenced) {
+	if (!pm_referenced && global_clock_event) {
 		apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
 
 		/*

arch/x86/kernel/apic/bigsmp_32.c

@@ -38,32 +38,12 @@ static int bigsmp_early_logical_apicid(int cpu)
 	return early_per_cpu(x86_cpu_to_apicid, cpu);
 }
 
-static inline unsigned long calculate_ldr(int cpu)
-{
-	unsigned long val, id;
-
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	id = per_cpu(x86_bios_cpu_apicid, cpu);
-	val |= SET_APIC_LOGICAL_ID(id);
-
-	return val;
-}
-
 /*
- * Set up the logical destination ID.
+ * bigsmp enables physical destination mode
- *
+ * and doesn't use LDR and DFR
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
  */
 static void bigsmp_init_apic_ldr(void)
 {
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_FLAT);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
 }
 
 static void bigsmp_setup_apic_routing(void)

arch/x86/kernel/apic/io_apic.c

@@ -2438,7 +2438,13 @@ unsigned int arch_dynirq_lower_bound(unsigned int from)
 	 * dmar_alloc_hwirq() may be called before setup_IO_APIC(), so use
 	 * gsi_top if ioapic_dynirq_base hasn't been initialized yet.
 	 */
-	return ioapic_initialized ? ioapic_dynirq_base : gsi_top;
+	if (!ioapic_initialized)
+		return gsi_top;
+	/*
+	 * For DT enabled machines ioapic_dynirq_base is irrelevant and not
+	 * updated. So simply return @from if ioapic_dynirq_base == 0.
+	 */
+	return ioapic_dynirq_base ? : from;
 }
 
 #ifdef CONFIG_X86_32

arch/x86/kernel/cpu/amd.c

@@ -804,6 +804,64 @@ static void init_amd_ln(struct cpuinfo_x86 *c)
 	msr_set_bit(MSR_AMD64_DE_CFG, 31);
 }
 
+static bool rdrand_force;
+
+static int __init rdrand_cmdline(char *str)
+{
+	if (!str)
+		return -EINVAL;
+
+	if (!strcmp(str, "force"))
+		rdrand_force = true;
+	else
+		return -EINVAL;
+
+	return 0;
+}
+early_param("rdrand", rdrand_cmdline);
+
+static void clear_rdrand_cpuid_bit(struct cpuinfo_x86 *c)
+{
+	/*
+	 * Saving of the MSR used to hide the RDRAND support during
+	 * suspend/resume is done by arch/x86/power/cpu.c, which is
+	 * dependent on CONFIG_PM_SLEEP.
+	 */
+	if (!IS_ENABLED(CONFIG_PM_SLEEP))
+		return;
+
+	/*
+	 * The nordrand option can clear X86_FEATURE_RDRAND, so check for
+	 * RDRAND support using the CPUID function directly.
+	 */
+	if (!(cpuid_ecx(1) & BIT(30)) || rdrand_force)
+		return;
+
+	msr_clear_bit(MSR_AMD64_CPUID_FN_1, 62);
+
+	/*
+	 * Verify that the CPUID change has occurred in case the kernel is
+	 * running virtualized and the hypervisor doesn't support the MSR.
+	 */
+	if (cpuid_ecx(1) & BIT(30)) {
+		pr_info_once("BIOS may not properly restore RDRAND after suspend, but hypervisor does not support hiding RDRAND via CPUID.\n");
+		return;
+	}
+
+	clear_cpu_cap(c, X86_FEATURE_RDRAND);
+	pr_info_once("BIOS may not properly restore RDRAND after suspend, hiding RDRAND via CPUID. Use rdrand=force to reenable.\n");
+}
+
+static void init_amd_jg(struct cpuinfo_x86 *c)
+{
+	/*
+	 * Some BIOS implementations do not restore proper RDRAND support
+	 * across suspend and resume. Check on whether to hide the RDRAND
+	 * instruction support via CPUID.
+	 */
+	clear_rdrand_cpuid_bit(c);
+}
+
 static void init_amd_bd(struct cpuinfo_x86 *c)
 {
 	u64 value;
@@ -818,6 +876,13 @@ static void init_amd_bd(struct cpuinfo_x86 *c)
 			wrmsrl_safe(MSR_F15H_IC_CFG, value);
 		}
 	}
+
+	/*
+	 * Some BIOS implementations do not restore proper RDRAND support
+	 * across suspend and resume. Check on whether to hide the RDRAND
+	 * instruction support via CPUID.
+	 */
+	clear_rdrand_cpuid_bit(c);
 }
 
 static void init_amd_zn(struct cpuinfo_x86 *c)
@@ -860,6 +925,7 @@ static void init_amd(struct cpuinfo_x86 *c)
 	case 0x10: init_amd_gh(c); break;
 	case 0x12: init_amd_ln(c); break;
 	case 0x15: init_amd_bd(c); break;
+	case 0x16: init_amd_jg(c); break;
 	case 0x17: init_amd_zn(c); break;
 	}
 

arch/x86/kernel/uprobes.c

@@ -508,9 +508,12 @@ struct uprobe_xol_ops {
 	void	(*abort)(struct arch_uprobe *, struct pt_regs *);
 };
 
-static inline int sizeof_long(void)
+static inline int sizeof_long(struct pt_regs *regs)
 {
-	return in_ia32_syscall() ? 4 : 8;
+	/*
+	 * Check registers for mode as in_xxx_syscall() does not apply here.
+	 */
+	return user_64bit_mode(regs) ? 8 : 4;
 }
 
 static int default_pre_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs)
@@ -521,9 +524,9 @@ static int default_pre_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs)
 
 static int emulate_push_stack(struct pt_regs *regs, unsigned long val)
 {
-	unsigned long new_sp = regs->sp - sizeof_long();
+	unsigned long new_sp = regs->sp - sizeof_long(regs);
 
-	if (copy_to_user((void __user *)new_sp, &val, sizeof_long()))
+	if (copy_to_user((void __user *)new_sp, &val, sizeof_long(regs)))
 		return -EFAULT;
 
 	regs->sp = new_sp;
@@ -556,7 +559,7 @@ static int default_post_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs
 		long correction = utask->vaddr - utask->xol_vaddr;
 		regs->ip += correction;
 	} else if (auprobe->defparam.fixups & UPROBE_FIX_CALL) {
-		regs->sp += sizeof_long(); /* Pop incorrect return address */
+		regs->sp += sizeof_long(regs); /* Pop incorrect return address */
 		if (emulate_push_stack(regs, utask->vaddr + auprobe->defparam.ilen))
 			return -ERESTART;
 	}
@@ -675,7 +678,7 @@ static int branch_post_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs)
 	 * "call" insn was executed out-of-line. Just restore ->sp and restart.
 	 * We could also restore ->ip and try to call branch_emulate_op() again.
 	 */
-	regs->sp += sizeof_long();
+	regs->sp += sizeof_long(regs);
 	return -ERESTART;
 }
 
@@ -1056,7 +1059,7 @@ bool arch_uprobe_skip_sstep(struct arch_uprobe *auprobe, struct pt_regs *regs)
 unsigned long
 arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs *regs)
 {
-	int rasize = sizeof_long(), nleft;
+	int rasize = sizeof_long(regs), nleft;
 	unsigned long orig_ret_vaddr = 0; /* clear high bits for 32-bit apps */
 
 	if (copy_from_user(&orig_ret_vaddr, (void __user *)regs->sp, rasize))

arch/x86/kvm/hyperv.c

@@ -1781,7 +1781,7 @@ int kvm_vm_ioctl_hv_eventfd(struct kvm *kvm, struct kvm_hyperv_eventfd *args)
 int kvm_vcpu_ioctl_get_hv_cpuid(struct kvm_vcpu *vcpu, struct kvm_cpuid2 *cpuid,
 				struct kvm_cpuid_entry2 __user *entries)
 {
-	uint16_t evmcs_ver = kvm_x86_ops->nested_get_evmcs_version(vcpu);
+	uint16_t evmcs_ver = 0;
 	struct kvm_cpuid_entry2 cpuid_entries[] = {
 		{ .function = HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS },
 		{ .function = HYPERV_CPUID_INTERFACE },
@@ -1793,6 +1793,9 @@ int kvm_vcpu_ioctl_get_hv_cpuid(struct kvm_vcpu *vcpu, struct kvm_cpuid2 *cpuid,
 	};
 	int i, nent = ARRAY_SIZE(cpuid_entries);
 
+	if (kvm_x86_ops->nested_get_evmcs_version)
+		evmcs_ver = kvm_x86_ops->nested_get_evmcs_version(vcpu);
+
 	/* Skip NESTED_FEATURES if eVMCS is not supported */
 	if (!evmcs_ver)
 		--nent;

arch/x86/kvm/lapic.c

@@ -216,6 +216,9 @@ static void recalculate_apic_map(struct kvm *kvm)
 		if (!apic_x2apic_mode(apic) && !new->phys_map[xapic_id])
 			new->phys_map[xapic_id] = apic;
 
+		if (!kvm_apic_sw_enabled(apic))
+			continue;
+
 		ldr = kvm_lapic_get_reg(apic, APIC_LDR);
 
 		if (apic_x2apic_mode(apic)) {
@@ -258,6 +261,8 @@ static inline void apic_set_spiv(struct kvm_lapic *apic, u32 val)
 			static_key_slow_dec_deferred(&apic_sw_disabled);
 		else
 			static_key_slow_inc(&apic_sw_disabled.key);
+
+		recalculate_apic_map(apic->vcpu->kvm);
 	}
 }
 

arch/x86/kvm/mmu.c

@@ -5653,38 +5653,7 @@ static void kvm_mmu_invalidate_zap_pages_in_memslot(struct kvm *kvm,
 			struct kvm_memory_slot *slot,
 			struct kvm_page_track_notifier_node *node)
 {
-	struct kvm_mmu_page *sp;
+	kvm_mmu_zap_all(kvm);
-	LIST_HEAD(invalid_list);
-	unsigned long i;
-	bool flush;
-	gfn_t gfn;
-
-	spin_lock(&kvm->mmu_lock);
-
-	if (list_empty(&kvm->arch.active_mmu_pages))
-		goto out_unlock;
-
-	flush = slot_handle_all_level(kvm, slot, kvm_zap_rmapp, false);
-
-	for (i = 0; i < slot->npages; i++) {
-		gfn = slot->base_gfn + i;
-
-		for_each_valid_sp(kvm, sp, gfn) {
-			if (sp->gfn != gfn)
-				continue;
-
-			kvm_mmu_prepare_zap_page(kvm, sp, &invalid_list);
-		}
-		if (need_resched() || spin_needbreak(&kvm->mmu_lock)) {
-			kvm_mmu_remote_flush_or_zap(kvm, &invalid_list, flush);
-			flush = false;
-			cond_resched_lock(&kvm->mmu_lock);
-		}
-	}
-	kvm_mmu_remote_flush_or_zap(kvm, &invalid_list, flush);
-
-out_unlock:
-	spin_unlock(&kvm->mmu_lock);
 }
 
 void kvm_mmu_init_vm(struct kvm *kvm)

arch/x86/kvm/svm.c

@@ -1714,7 +1714,6 @@ static int avic_init_backing_page(struct kvm_vcpu *vcpu)
 	if (!entry)
 		return -EINVAL;
 
-	new_entry = READ_ONCE(*entry);
 	new_entry = __sme_set((page_to_phys(svm->avic_backing_page) &
 			      AVIC_PHYSICAL_ID_ENTRY_BACKING_PAGE_MASK) |
 			      AVIC_PHYSICAL_ID_ENTRY_VALID_MASK);
@@ -7129,12 +7128,6 @@ failed:
 	return ret;
 }
 
-static uint16_t nested_get_evmcs_version(struct kvm_vcpu *vcpu)
-{
-	/* Not supported */
-	return 0;
-}
-
 static int nested_enable_evmcs(struct kvm_vcpu *vcpu,
 				   uint16_t *vmcs_version)
 {
@@ -7333,7 +7326,7 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = {
 	.mem_enc_unreg_region = svm_unregister_enc_region,
 
 	.nested_enable_evmcs = nested_enable_evmcs,
-	.nested_get_evmcs_version = nested_get_evmcs_version,
+	.nested_get_evmcs_version = NULL,
 
 	.need_emulation_on_page_fault = svm_need_emulation_on_page_fault,
 };

arch/x86/kvm/vmx/vmx.c

@@ -7797,6 +7797,7 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = {
 	.set_nested_state = NULL,
 	.get_vmcs12_pages = NULL,
 	.nested_enable_evmcs = NULL,
+	.nested_get_evmcs_version = NULL,
 	.need_emulation_on_page_fault = vmx_need_emulation_on_page_fault,
 };
 

arch/x86/kvm/x86.c

@@ -6594,12 +6594,13 @@ restart:
 		unsigned long rflags = kvm_x86_ops->get_rflags(vcpu);
 		toggle_interruptibility(vcpu, ctxt->interruptibility);
 		vcpu->arch.emulate_regs_need_sync_to_vcpu = false;
+		if (!ctxt->have_exception ||
+		    exception_type(ctxt->exception.vector) == EXCPT_TRAP) {
 			kvm_rip_write(vcpu, ctxt->eip);
 			if (r == EMULATE_DONE && ctxt->tf)
 				kvm_vcpu_do_singlestep(vcpu, &r);
-		if (!ctxt->have_exception ||
-		    exception_type(ctxt->exception.vector) == EXCPT_TRAP)
 			__kvm_set_rflags(vcpu, ctxt->eflags);
+		}
 
 		/*
 		 * For STI, interrupts are shadowed; so KVM_REQ_EVENT will

arch/x86/mm/pageattr.c

@@ -516,7 +516,7 @@ static inline void check_conflict(int warnlvl, pgprot_t prot, pgprotval_t val,
  */
 static inline pgprot_t static_protections(pgprot_t prot, unsigned long start,
 					  unsigned long pfn, unsigned long npg,
-					  int warnlvl)
+					  unsigned long lpsize, int warnlvl)
 {
 	pgprotval_t forbidden, res;
 	unsigned long end;
@@ -535,9 +535,17 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long start,
 	check_conflict(warnlvl, prot, res, start, end, pfn, "Text NX");
 	forbidden = res;
 
+	/*
+	 * Special case to preserve a large page. If the change spawns the
+	 * full large page mapping then there is no point to split it
+	 * up. Happens with ftrace and is going to be removed once ftrace
+	 * switched to text_poke().
+	 */
+	if (lpsize != (npg * PAGE_SIZE) || (start & (lpsize - 1))) {
 		res = protect_kernel_text_ro(start, end);
 		check_conflict(warnlvl, prot, res, start, end, pfn, "Text RO");
 		forbidden |= res;
+	}
 
 	/* Check the PFN directly */
 	res = protect_pci_bios(pfn, pfn + npg - 1);
@@ -819,7 +827,7 @@ static int __should_split_large_page(pte_t *kpte, unsigned long address,
 	 * extra conditional required here.
 	 */
 	chk_prot = static_protections(old_prot, lpaddr, old_pfn, numpages,
-				      CPA_CONFLICT);
+				      psize, CPA_CONFLICT);
 
 	if (WARN_ON_ONCE(pgprot_val(chk_prot) != pgprot_val(old_prot))) {
 		/*
@@ -855,7 +863,7 @@ static int __should_split_large_page(pte_t *kpte, unsigned long address,
 	 * protection requirement in the large page.
 	 */
 	new_prot = static_protections(req_prot, lpaddr, old_pfn, numpages,
-				      CPA_DETECT);
+				      psize, CPA_DETECT);
 
 	/*
 	 * If there is a conflict, split the large page.
@@ -906,7 +914,8 @@ static void split_set_pte(struct cpa_data *cpa, pte_t *pte, unsigned long pfn,
 	if (!cpa->force_static_prot)
 		goto set;
 
-	prot = static_protections(ref_prot, address, pfn, npg, CPA_PROTECT);
+	/* Hand in lpsize = 0 to enforce the protection mechanism */
+	prot = static_protections(ref_prot, address, pfn, npg, 0, CPA_PROTECT);
 
 	if (pgprot_val(prot) == pgprot_val(ref_prot))
 		goto set;
@@ -1503,7 +1512,8 @@ repeat:
 		pgprot_val(new_prot) |= pgprot_val(cpa->mask_set);
 
 		cpa_inc_4k_install();
-		new_prot = static_protections(new_prot, address, pfn, 1,
+		/* Hand in lpsize = 0 to enforce the protection mechanism */
+		new_prot = static_protections(new_prot, address, pfn, 1, 0,
 					      CPA_PROTECT);
 
 		new_prot = pgprot_clear_protnone_bits(new_prot);

arch/x86/net/bpf_jit_comp.c

@@ -390,8 +390,9 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 
 	emit_prologue(&prog, bpf_prog->aux->stack_depth,
 		      bpf_prog_was_classic(bpf_prog));
+	addrs[0] = prog - temp;
 
-	for (i = 0; i < insn_cnt; i++, insn++) {
+	for (i = 1; i <= insn_cnt; i++, insn++) {
 		const s32 imm32 = insn->imm;
 		u32 dst_reg = insn->dst_reg;
 		u32 src_reg = insn->src_reg;
@@ -1105,7 +1106,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		extra_pass = true;
 		goto skip_init_addrs;
 	}
-	addrs = kmalloc_array(prog->len, sizeof(*addrs), GFP_KERNEL);
+	addrs = kmalloc_array(prog->len + 1, sizeof(*addrs), GFP_KERNEL);
 	if (!addrs) {
 		prog = orig_prog;
 		goto out_addrs;
@@ -1115,7 +1116,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	 * Before first pass, make a rough estimation of addrs[]
 	 * each BPF instruction is translated to less than 64 bytes
 	 */
-	for (proglen = 0, i = 0; i < prog->len; i++) {
+	for (proglen = 0, i = 0; i <= prog->len; i++) {
 		proglen += 64;
 		addrs[i] = proglen;
 	}
@@ -1180,7 +1181,7 @@ out_image:
 
 	if (!image || !prog->is_func || extra_pass) {
 		if (image)
-			bpf_prog_fill_jited_linfo(prog, addrs);
+			bpf_prog_fill_jited_linfo(prog, addrs + 1);
 out_addrs:
 		kfree(addrs);
 		kfree(jit_data);

arch/x86/power/cpu.c

@@ -12,6 +12,7 @@
 #include <linux/smp.h>
 #include <linux/perf_event.h>
 #include <linux/tboot.h>
+#include <linux/dmi.h>
 
 #include <asm/pgtable.h>
 #include <asm/proto.h>
@@ -23,7 +24,7 @@
 #include <asm/debugreg.h>
 #include <asm/cpu.h>
 #include <asm/mmu_context.h>
-#include <linux/dmi.h>
+#include <asm/cpu_device_id.h>
 
 #ifdef CONFIG_X86_32
 __visible unsigned long saved_context_ebx;
@@ -397,15 +398,14 @@ static int __init bsp_pm_check_init(void)
 
 core_initcall(bsp_pm_check_init);
 
-static int msr_init_context(const u32 *msr_id, const int total_num)
+static int msr_build_context(const u32 *msr_id, const int num)
 {
-	int i = 0;
+	struct saved_msrs *saved_msrs = &saved_context.saved_msrs;
 	struct saved_msr *msr_array;
+	int total_num;
+	int i, j;
 
-	if (saved_context.saved_msrs.array || saved_context.saved_msrs.num > 0) {
+	total_num = saved_msrs->num + num;
-		pr_err("x86/pm: MSR quirk already applied, please check your DMI match table.\n");
-		return -EINVAL;
-	}
 
 	msr_array = kmalloc_array(total_num, sizeof(struct saved_msr), GFP_KERNEL);
 	if (!msr_array) {
@@ -413,19 +413,30 @@ static int msr_init_context(const u32 *msr_id, const int total_num)
 		return -ENOMEM;
 	}
 
-	for (i = 0; i < total_num; i++) {
+	if (saved_msrs->array) {
-		msr_array[i].info.msr_no	= msr_id[i];
+		/*
+		 * Multiple callbacks can invoke this function, so copy any
+		 * MSR save requests from previous invocations.
+		 */
+		memcpy(msr_array, saved_msrs->array,
+		       sizeof(struct saved_msr) * saved_msrs->num);
+
+		kfree(saved_msrs->array);
+	}
+
+	for (i = saved_msrs->num, j = 0; i < total_num; i++, j++) {
+		msr_array[i].info.msr_no	= msr_id[j];
 		msr_array[i].valid		= false;
 		msr_array[i].info.reg.q		= 0;
 	}
-	saved_context.saved_msrs.num	= total_num;
+	saved_msrs->num   = total_num;
-	saved_context.saved_msrs.array	= msr_array;
+	saved_msrs->array = msr_array;
 
 	return 0;
 }
 
 /*
- * The following section is a quirk framework for problematic BIOSen:
+ * The following sections are a quirk framework for problematic BIOSen:
  * Sometimes MSRs are modified by the BIOSen after suspended to
  * RAM, this might cause unexpected behavior after wakeup.
  * Thus we save/restore these specified MSRs across suspend/resume
@@ -440,7 +451,7 @@ static int msr_initialize_bdw(const struct dmi_system_id *d)
 	u32 bdw_msr_id[] = { MSR_IA32_THERM_CONTROL };
 
 	pr_info("x86/pm: %s detected, MSR saving is needed during suspending.\n", d->ident);
-	return msr_init_context(bdw_msr_id, ARRAY_SIZE(bdw_msr_id));
+	return msr_build_context(bdw_msr_id, ARRAY_SIZE(bdw_msr_id));
 }
 
 static const struct dmi_system_id msr_save_dmi_table[] = {
@@ -455,9 +466,58 @@ static const struct dmi_system_id msr_save_dmi_table[] = {
 	{}
 };
 
+static int msr_save_cpuid_features(const struct x86_cpu_id *c)
+{
+	u32 cpuid_msr_id[] = {
+		MSR_AMD64_CPUID_FN_1,
+	};
+
+	pr_info("x86/pm: family %#hx cpu detected, MSR saving is needed during suspending.\n",
+		c->family);
+
+	return msr_build_context(cpuid_msr_id, ARRAY_SIZE(cpuid_msr_id));
+}
+
+static const struct x86_cpu_id msr_save_cpu_table[] = {
+	{
+		.vendor = X86_VENDOR_AMD,
+		.family = 0x15,
+		.model = X86_MODEL_ANY,
+		.feature = X86_FEATURE_ANY,
+		.driver_data = (kernel_ulong_t)msr_save_cpuid_features,
+	},
+	{
+		.vendor = X86_VENDOR_AMD,
+		.family = 0x16,
+		.model = X86_MODEL_ANY,
+		.feature = X86_FEATURE_ANY,
+		.driver_data = (kernel_ulong_t)msr_save_cpuid_features,
+	},
+	{}
+};
+
+typedef int (*pm_cpu_match_t)(const struct x86_cpu_id *);
+static int pm_cpu_check(const struct x86_cpu_id *c)
+{
+	const struct x86_cpu_id *m;
+	int ret = 0;
+
+	m = x86_match_cpu(msr_save_cpu_table);
+	if (m) {
+		pm_cpu_match_t fn;
+
+		fn = (pm_cpu_match_t)m->driver_data;
+		ret = fn(m);
+	}
+
+	return ret;
+}
+
 static int pm_check_save_msr(void)
 {
 	dmi_check_system(msr_save_dmi_table);
+	pm_cpu_check(msr_save_cpu_table);
+
 	return 0;
 }
 

drivers/atm/Kconfig

@@ -200,7 +200,7 @@ config ATM_NICSTAR_USE_SUNI
 	  make the card work).
 
 config ATM_NICSTAR_USE_IDT77105
-	bool "Use IDT77015 PHY driver (25Mbps)"
+	bool "Use IDT77105 PHY driver (25Mbps)"
 	depends on ATM_NICSTAR
 	help
 	  Support for the PHYsical layer chip in ForeRunner LE25 cards. In

drivers/auxdisplay/ht16k33.c

@@ -74,7 +74,7 @@ struct ht16k33_priv {
 	struct ht16k33_fbdev fbdev;
 };
 
-static struct fb_fix_screeninfo ht16k33_fb_fix = {
+static const struct fb_fix_screeninfo ht16k33_fb_fix = {
 	.id		= DRIVER_NAME,
 	.type		= FB_TYPE_PACKED_PIXELS,
 	.visual		= FB_VISUAL_MONO10,
@@ -85,7 +85,7 @@ static struct fb_fix_screeninfo ht16k33_fb_fix = {
 	.accel		= FB_ACCEL_NONE,
 };
 
-static struct fb_var_screeninfo ht16k33_fb_var = {
+static const struct fb_var_screeninfo ht16k33_fb_var = {
 	.xres = HT16K33_MATRIX_LED_MAX_ROWS,
 	.yres = HT16K33_MATRIX_LED_MAX_COLS,
 	.xres_virtual = HT16K33_MATRIX_LED_MAX_ROWS,

drivers/block/drbd/drbd_main.c

@@ -322,6 +322,8 @@ static int drbd_thread_setup(void *arg)
 		 thi->name[0],
 		 resource->name);
 
+	allow_kernel_signal(DRBD_SIGKILL);
+	allow_kernel_signal(SIGXCPU);
 restart:
 	retval = thi->function(thi);
 

drivers/block/rbd.c

@@ -3038,6 +3038,17 @@ again:
 		}
 		return true;
 	case RBD_OBJ_READ_PARENT:
+		/*
+		 * The parent image is read only up to the overlap -- zero-fill
+		 * from the overlap to the end of the request.
+		 */
+		if (!*result) {
+			u32 obj_overlap = rbd_obj_img_extents_bytes(obj_req);
+
+			if (obj_overlap < obj_req->ex.oe_len)
+				rbd_obj_zero_range(obj_req, obj_overlap,
+					    obj_req->ex.oe_len - obj_overlap);
+		}
 		return true;
 	default:
 		BUG();

drivers/bluetooth/btqca.c

@@ -99,6 +99,27 @@ static int qca_send_reset(struct hci_dev *hdev)
 	return 0;
 }
 
+int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	int err;
+
+	bt_dev_dbg(hdev, "QCA pre shutdown cmd");
+
+	skb = __hci_cmd_sync(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
+				NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		bt_dev_err(hdev, "QCA preshutdown_cmd failed (%d)", err);
+		return err;
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(qca_send_pre_shutdown_cmd);
+
 static void qca_tlv_check_data(struct rome_config *config,
 				const struct firmware *fw)
 {
@@ -119,6 +140,7 @@ static void qca_tlv_check_data(struct rome_config *config,
 	BT_DBG("Length\t\t : %d bytes", length);
 
 	config->dnld_mode = ROME_SKIP_EVT_NONE;
+	config->dnld_type = ROME_SKIP_EVT_NONE;
 
 	switch (config->type) {
 	case TLV_TYPE_PATCH:
@@ -268,7 +290,7 @@ static int qca_inject_cmd_complete_event(struct hci_dev *hdev)
 
 	evt = skb_put(skb, sizeof(*evt));
 	evt->ncmd = 1;
-	evt->opcode = QCA_HCI_CC_OPCODE;
+	evt->opcode = cpu_to_le16(QCA_HCI_CC_OPCODE);
 
 	skb_put_u8(skb, QCA_HCI_CC_SUCCESS);
 
@@ -323,7 +345,7 @@ static int qca_download_firmware(struct hci_dev *hdev,
 	 */
 	if (config->dnld_type == ROME_SKIP_EVT_VSE_CC ||
 	    config->dnld_type == ROME_SKIP_EVT_VSE)
-		return qca_inject_cmd_complete_event(hdev);
+		ret = qca_inject_cmd_complete_event(hdev);
 
 out:
 	release_firmware(fw);
@@ -388,6 +410,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		return err;
 	}
 
+	/* Give the controller some time to get ready to receive the NVM */
+	msleep(10);
+
 	/* Download NVM configuration */
 	config.type = TLV_TYPE_NVM;
 	if (firmware_name)

drivers/bluetooth/btqca.h

@@ -13,6 +13,7 @@
 #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
 #define EDL_NVM_ACCESS_SET_REQ_CMD	(0x01)
 #define MAX_SIZE_PER_TLV_SEGMENT	(243)
+#define QCA_PRE_SHUTDOWN_CMD		(0xFC08)
 
 #define EDL_CMD_REQ_RES_EVT		(0x00)
 #define EDL_PATCH_VER_RES_EVT		(0x19)
@@ -135,6 +136,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		   const char *firmware_name);
 int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
 int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
 static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
 {
 	return soc_type == QCA_WCN3990 || soc_type == QCA_WCN3998;
@@ -167,4 +169,9 @@ static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
 {
 	return false;
 }
+
+static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
 #endif

drivers/bluetooth/btusb.c

@@ -2762,8 +2762,10 @@ static int btusb_mtk_setup_firmware(struct hci_dev *hdev, const char *fwname)
 	fw_size = fw->size;
 
 	/* The size of patch header is 30 bytes, should be skip */
-	if (fw_size < 30)
+	if (fw_size < 30) {
+		err = -EINVAL;
 		goto err_release_fw;
+	}
 
 	fw_size -= 30;
 	fw_ptr += 30;

drivers/bluetooth/hci_qca.c

@@ -705,7 +705,7 @@ static void device_want_to_sleep(struct hci_uart *hu)
 	unsigned long flags;
 	struct qca_data *qca = hu->priv;
 
-	BT_DBG("hu %p want to sleep", hu);
+	BT_DBG("hu %p want to sleep in %d state", hu, qca->rx_ibs_state);
 
 	spin_lock_irqsave(&qca->hci_ibs_lock, flags);
 
@@ -720,7 +720,7 @@ static void device_want_to_sleep(struct hci_uart *hu)
 		break;
 
 	case HCI_IBS_RX_ASLEEP:
-		/* Fall through */
+		break;
 
 	default:
 		/* Any other state is illegal */
@@ -912,7 +912,7 @@ static int qca_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
 		if (hdr->evt == HCI_EV_VENDOR)
 			complete(&qca->drop_ev_comp);
 
-		kfree(skb);
+		kfree_skb(skb);
 
 		return 0;
 	}
@@ -1386,6 +1386,9 @@ static int qca_power_off(struct hci_dev *hdev)
 {
 	struct hci_uart *hu = hci_get_drvdata(hdev);
 
+	/* Perform pre shutdown command */
+	qca_send_pre_shutdown_cmd(hdev);
+
 	qca_power_shutdown(hu);
 	return 0;
 }

drivers/bus/hisi_lpc.c

@@ -456,6 +456,17 @@ struct hisi_lpc_acpi_cell {
 	size_t pdata_size;
 };
 
+static void hisi_lpc_acpi_remove(struct device *hostdev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(hostdev);
+	struct acpi_device *child;
+
+	device_for_each_child(hostdev, NULL, hisi_lpc_acpi_remove_subdev);
+
+	list_for_each_entry(child, &adev->children, node)
+		acpi_device_clear_enumerated(child);
+}
+
 /*
  * hisi_lpc_acpi_probe - probe children for ACPI FW
  * @hostdev: LPC host device pointer
@@ -555,8 +566,7 @@ static int hisi_lpc_acpi_probe(struct device *hostdev)
 	return 0;
 
 fail:
-	device_for_each_child(hostdev, NULL,
+	hisi_lpc_acpi_remove(hostdev);
-			      hisi_lpc_acpi_remove_subdev);
 	return ret;
 }
 
@@ -569,6 +579,10 @@ static int hisi_lpc_acpi_probe(struct device *dev)
 {
 	return -ENODEV;
 }
+
+static void hisi_lpc_acpi_remove(struct device *hostdev)
+{
+}
 #endif // CONFIG_ACPI
 
 /*
@@ -606,24 +620,27 @@ static int hisi_lpc_probe(struct platform_device *pdev)
 	range->fwnode = dev->fwnode;
 	range->flags = LOGIC_PIO_INDIRECT;
 	range->size = PIO_INDIRECT_SIZE;
+	range->hostdata = lpcdev;
+	range->ops = &hisi_lpc_ops;
+	lpcdev->io_host = range;
 
 	ret = logic_pio_register_range(range);
 	if (ret) {
 		dev_err(dev, "register IO range failed (%d)!\n", ret);
 		return ret;
 	}
-	lpcdev->io_host = range;
 
 	/* register the LPC host PIO resources */
 	if (acpi_device)
 		ret = hisi_lpc_acpi_probe(dev);
 	else
 		ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
-	if (ret)
+	if (ret) {
+		logic_pio_unregister_range(range);
 		return ret;
+	}
 
-	lpcdev->io_host->hostdata = lpcdev;
+	dev_set_drvdata(dev, lpcdev);
-	lpcdev->io_host->ops = &hisi_lpc_ops;
 
 	io_end = lpcdev->io_host->io_start + lpcdev->io_host->size;
 	dev_info(dev, "registered range [%pa - %pa]\n",
@@ -632,6 +649,23 @@ static int hisi_lpc_probe(struct platform_device *pdev)
 	return ret;
 }
 
+static int hisi_lpc_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct acpi_device *acpi_device = ACPI_COMPANION(dev);
+	struct hisi_lpc_dev *lpcdev = dev_get_drvdata(dev);
+	struct logic_pio_hwaddr *range = lpcdev->io_host;
+
+	if (acpi_device)
+		hisi_lpc_acpi_remove(dev);
+	else
+		of_platform_depopulate(dev);
+
+	logic_pio_unregister_range(range);
+
+	return 0;
+}
+
 static const struct of_device_id hisi_lpc_of_match[] = {
 	{ .compatible = "hisilicon,hip06-lpc", },
 	{ .compatible = "hisilicon,hip07-lpc", },
@@ -645,5 +679,6 @@ static struct platform_driver hisi_lpc_driver = {
 		.acpi_match_table = ACPI_PTR(hisi_lpc_acpi_match),
 	},
 	.probe = hisi_lpc_probe,
+	.remove = hisi_lpc_remove,
 };
 builtin_platform_driver(hisi_lpc_driver);