rt2x00: Use fallthrough pseudo-keyword

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200821062052.GA8618@embeddedor
This commit is contained in:
Gustavo A. R. Silva 2020-08-21 01:20:52 -05:00 committed by Kalle Valo
parent 5ae6c8a696
commit 74aad39490
7 changed files with 24 additions and 28 deletions

View File

@ -1291,7 +1291,7 @@ static void rt2400pci_txdone(struct rt2x00_dev *rt2x00dev,
break;
case 2: /* Failure, excessive retries */
__set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
/* Fall through - this is a failed frame! */
fallthrough; /* this is a failed frame! */
default: /* Failure */
__set_bit(TXDONE_FAILURE, &txdesc.flags);
}

View File

@ -1419,7 +1419,7 @@ static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
break;
case 2: /* Failure, excessive retries */
__set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
/* Fall through - this is a failed frame! */
fallthrough; /* this is a failed frame! */
default: /* Failure */
__set_bit(TXDONE_FAILURE, &txdesc.flags);
}

View File

@ -928,7 +928,7 @@ static void rt2800_rate_from_status(struct skb_frame_desc *skbdesc,
switch (rt2x00_get_field32(status, TX_STA_FIFO_PHYMODE)) {
case RATE_MODE_HT_GREENFIELD:
flags |= IEEE80211_TX_RC_GREEN_FIELD;
/* fall through */
fallthrough;
case RATE_MODE_HT_MIX:
flags |= IEEE80211_TX_RC_MCS;
break;
@ -2567,7 +2567,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.tx_chain_num) {
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
/* fall through */
fallthrough;
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
break;
@ -2576,7 +2576,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.rx_chain_num) {
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
/* fall through */
fallthrough;
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
break;
@ -2768,10 +2768,10 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.tx_chain_num) {
case 3:
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
/* fallthrough */
fallthrough;
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
/* fallthrough */
fallthrough;
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
break;
@ -2780,10 +2780,10 @@ static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.rx_chain_num) {
case 3:
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
/* fallthrough */
fallthrough;
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
/* fallthrough */
fallthrough;
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
break;
@ -3005,10 +3005,10 @@ static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.tx_chain_num) {
case 3:
rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 1);
/* fallthrough */
fallthrough;
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD, 1);
/* fallthrough */
fallthrough;
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
break;
@ -3017,10 +3017,10 @@ static void rt2800_config_channel_rf3853(struct rt2x00_dev *rt2x00dev,
switch (rt2x00dev->default_ant.rx_chain_num) {
case 3:
rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 1);
/* fallthrough */
fallthrough;
case 2:
rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 1);
/* fallthrough */
fallthrough;
case 1:
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
break;
@ -4216,14 +4216,14 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rf->channel > 14);
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN,
rf->channel <= 14);
/* fall-through */
fallthrough;
case 2:
/* Turn on secondary PAs */
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN,
rf->channel > 14);
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN,
rf->channel <= 14);
/* fall-through */
fallthrough;
case 1:
/* Turn on primary PAs */
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN,
@ -4241,12 +4241,12 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
/* Turn on tertiary LNAs */
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A2_EN, 1);
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G2_EN, 1);
/* fall-through */
fallthrough;
case 2:
/* Turn on secondary LNAs */
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
/* fall-through */
fallthrough;
case 1:
/* Turn on primary LNAs */
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
@ -5438,10 +5438,10 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
switch (rt2x00dev->default_ant.tx_chain_num) {
case 3:
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G2_EN, 1);
/* fall through */
fallthrough;
case 2:
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
/* fall through */
fallthrough;
case 1:
default:
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, 1);
@ -5451,10 +5451,10 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev)
switch (rt2x00dev->default_ant.tx_chain_num) {
case 3:
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A2_EN, 1);
/* fall through */
fallthrough;
case 2:
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
/* fall through */
fallthrough;
case 1:
default:
rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, 1);
@ -10100,10 +10100,10 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
switch (rx_chains) {
case 3:
spec->ht.mcs.rx_mask[2] = 0xff;
/* fall through */
fallthrough;
case 2:
spec->ht.mcs.rx_mask[1] = 0xff;
/* fall through */
fallthrough;
case 1:
spec->ht.mcs.rx_mask[0] = 0xff;
spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */

View File

@ -593,7 +593,6 @@ void rt2800mmio_queue_init(struct data_queue *queue)
break;
case QID_ATIM:
/* fallthrough */
default:
BUG();
break;

View File

@ -746,7 +746,6 @@ static void rt2800usb_queue_init(struct data_queue *queue)
break;
case QID_ATIM:
/* fallthrough */
default:
BUG();
break;

View File

@ -2130,7 +2130,7 @@ static void rt61pci_txdone(struct rt2x00_dev *rt2x00dev)
break;
case 6: /* Failure, excessive retries */
__set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
/* Fall through - this is a failed frame! */
fallthrough; /* this is a failed frame! */
default: /* Failure */
__set_bit(TXDONE_FAILURE, &txdesc.flags);
}
@ -2953,7 +2953,6 @@ static void rt61pci_queue_init(struct data_queue *queue)
break;
case QID_ATIM:
/* fallthrough */
default:
BUG();
break;

View File

@ -2373,7 +2373,6 @@ static void rt73usb_queue_init(struct data_queue *queue)
break;
case QID_ATIM:
/* fallthrough */
default:
BUG();
break;