regulator: ab8500: Update info->update_val only when successfully update register

Don't update info->update_val if write to the register fails.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Axel Lin 2013-03-28 17:23:00 +08:00 committed by Mark Brown
parent da0b0c47dc
commit 742a73259d
1 changed files with 19 additions and 8 deletions

View File

@ -184,8 +184,8 @@ static unsigned int ab8500_regulator_get_optimum_mode(
static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
unsigned int mode)
{
int ret = 0;
int ret;
u8 update_val;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
if (info == NULL) {
@ -195,31 +195,42 @@ static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
switch (mode) {
case REGULATOR_MODE_NORMAL:
info->update_val = info->update_val_normal;
update_val = info->update_val_normal;
break;
case REGULATOR_MODE_IDLE:
info->update_val = info->update_val_idle;
update_val = info->update_val_idle;
break;
default:
return -EINVAL;
}
/* ab8500 regulators share mode and enable in the same register bits.
off = 0b00
low power mode= 0b11
full powermode = 0b01
(HW control mode = 0b10)
Thus we don't write to the register when regulator is disabled.
*/
if (info->is_enabled) {
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->update_bank, info->update_reg,
info->update_mask, info->update_val);
if (ret < 0)
info->update_mask, update_val);
if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't set regulator mode\n");
return ret;
}
dev_vdbg(rdev_get_dev(rdev),
"%s-set_mode (bank, reg, mask, value): "
"0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
info->update_mask, info->update_val);
info->update_mask, update_val);
}
return ret;
info->update_val = update_val;
return 0;
}
static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)