From 73ae1462b758f07d1209c913f4b1fbe47e0827b9 Mon Sep 17 00:00:00 2001 From: Craig Tatlor Date: Wed, 26 Sep 2018 17:26:43 +0100 Subject: [PATCH] dt-bindings: pinctrl: qcom: Add SDM660 pinctrl binding Add the binding for the TLMM pinctrl block found in the SDM660 platform. Signed-off-by: Craig Tatlor Reviewed-by: Bjorn Andersson Reviewed-by: Rob Herring Signed-off-by: Linus Walleij --- .../bindings/pinctrl/qcom,sdm660-pinctrl.txt | 191 ++++++++++++++++++ 1 file changed, 191 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt new file mode 100644 index 000000000000..769ca83bb40d --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm660-pinctrl.txt @@ -0,0 +1,191 @@ +Qualcomm Technologies, Inc. SDM660 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +SDM660 platform. + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,sdm660-pinctrl" or + "qcom,sdm630-pinctrl". + +- reg: + Usage: required + Value type: + Definition: the base address and size of the north, center and south + TLMM tiles. + +- reg-names: + Usage: required + Value type: + Definition: names for the cells of reg, must contain "north", "center" + and "south". + +- interrupts: + Usage: required + Value type: + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: + Definition: must be 2. Specifying the pin number and flags, as defined + in + +- gpio-controller: + Usage: required + Value type: + Definition: identifies this node as a gpio controller + +- gpio-ranges: + Usage: required + Value type: + Definition: Specifies the mapping between gpio controller and + pin-controller pins. + +- #gpio-cells: + Usage: required + Value type: + Definition: must be 2. Specifying the pin number and flags, as defined + in + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio113, + Supports mux, bias and drive-strength + sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd, sdc2_data sdc1_rclk, + Supports bias and drive-strength + +- function: + Usage: required + Value type: + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + adsp_ext, agera_pll, atest_char, atest_char0, atest_char1, + atest_char2, atest_char3, atest_gpsadc0, atest_gpsadc1, + atest_tsens, atest_tsens2, atest_usb1, atest_usb10, + atest_usb11, atest_usb12, atest_usb13, atest_usb2, + atest_usb20, atest_usb21, atest_usb22, atest_usb23, + audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, + blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_i2c7, + blsp_i2c8_a, blsp_i2c8_b, blsp_spi1, blsp_spi2, blsp_spi3, + blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi4, blsp_spi5, + blsp_spi6, blsp_spi7, blsp_spi8_a, blsp_spi8_b, + blsp_spi8_cs1, blsp_spi8_cs2, blsp_uart1, blsp_uart2, + blsp_uart5, blsp_uart6_a, blsp_uart6_b, blsp_uim1, + blsp_uim2, blsp_uim5, blsp_uim6, cam_mclk, cci_async, + cci_i2c, cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, + gcc_gp1, gcc_gp2, gcc_gp3, gpio, gps_tx_a, gps_tx_b, gps_tx_c, + isense_dbg, jitter_bist, ldo_en, ldo_update, m_voc, mdp_vsync, + mdss_vsync0, mdss_vsync1, mdss_vsync2, mdss_vsync3, mss_lte, + nav_pps_a, nav_pps_b, nav_pps_c, pa_indicator, phase_flag0, + phase_flag1, phase_flag10, phase_flag11, phase_flag12, + phase_flag13, phase_flag14, phase_flag15, phase_flag16, + phase_flag17, phase_flag18, phase_flag19, phase_flag2, + phase_flag20, phase_flag21, phase_flag22, phase_flag23, + phase_flag24, phase_flag25, phase_flag26, phase_flag27, + phase_flag28, phase_flag29, phase_flag3, phase_flag30, + phase_flag31, phase_flag4, phase_flag5, phase_flag6, + phase_flag7, phase_flag8, phase_flag9, pll_bypassnl, + pll_reset, pri_mi2s, pri_mi2s_ws, prng_rosc, pwr_crypto, + pwr_modem, pwr_nav, qdss_cti0_a, qdss_cti0_b, qdss_cti1_a, + qdss_cti1_b, qdss_gpio, qdss_gpio0, qdss_gpio1, qdss_gpio10, + qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, + qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, + qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink_enable, qlink_request, + qspi_clk, qspi_cs, qspi_data0, qspi_data1, qspi_data2, + qspi_data3, qspi_resetn, sec_mi2s, sndwire_clk, sndwire_data, + sp_cmu, ssc_irq, tgu_ch0, tgu_ch1, tsense_pwm1, tsense_pwm2, + uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, + uim2_data, uim2_present, uim2_reset, uim_batt, vfr_1, + vsense_clkout, vsense_data0, vsense_data1, vsense_mode, + wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1 + +- bias-disable: + Usage: optional + Value type: + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + tlmm: pinctrl@3100000 { + compatible = "qcom,sdm660-pinctrl"; + reg = <0x3100000 0x200000>, + <0x3500000 0x200000>, + <0x3900000 0x200000>; + reg-names = "south", "center", "north"; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 114>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + };