pwm: visconti: Add Toshiba Visconti SoC PWM support
Add driver for the PWM controller on Toshiba Visconti ARM SoC. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [thierry.reding@gmail.com: fix up a couple of checkpatch warnings] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This commit is contained in:
parent
b0221e706c
commit
721b595744
|
@ -601,6 +601,15 @@ config PWM_TWL_LED
|
|||
To compile this driver as a module, choose M here: the module
|
||||
will be called pwm-twl-led.
|
||||
|
||||
config PWM_VISCONTI
|
||||
tristate "Toshiba Visconti PWM support"
|
||||
depends on ARCH_VISCONTI || COMPILE_TEST
|
||||
help
|
||||
PWM Subsystem driver support for Toshiba Visconti SoCs.
|
||||
|
||||
To compile this driver as a module, choose M here: the module
|
||||
will be called pwm-visconti.
|
||||
|
||||
config PWM_VT8500
|
||||
tristate "vt8500 PWM support"
|
||||
depends on ARCH_VT8500 || COMPILE_TEST
|
||||
|
|
|
@ -56,4 +56,5 @@ obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
|
|||
obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o
|
||||
obj-$(CONFIG_PWM_TWL) += pwm-twl.o
|
||||
obj-$(CONFIG_PWM_TWL_LED) += pwm-twl-led.o
|
||||
obj-$(CONFIG_PWM_VISCONTI) += pwm-visconti.o
|
||||
obj-$(CONFIG_PWM_VT8500) += pwm-vt8500.o
|
||||
|
|
|
@ -0,0 +1,190 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Toshiba Visconti pulse-width-modulation controller driver
|
||||
*
|
||||
* Copyright (c) 2020 - 2021 TOSHIBA CORPORATION
|
||||
* Copyright (c) 2020 - 2021 Toshiba Electronic Devices & Storage Corporation
|
||||
*
|
||||
* Authors: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
|
||||
*
|
||||
* Limitations:
|
||||
* - The fixed input clock is running at 1 MHz and is divided by either 1,
|
||||
* 2, 4 or 8.
|
||||
* - When the settings of the PWM are modified, the new values are shadowed
|
||||
* in hardware until the PIPGM_PCSR register is written and the currently
|
||||
* running period is completed. This way the hardware switches atomically
|
||||
* from the old setting to the new.
|
||||
* - Disabling the hardware completes the currently running period and keeps
|
||||
* the output at low level at all times.
|
||||
*/
|
||||
|
||||
#include <linux/err.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/pwm.h>
|
||||
|
||||
#define PIPGM_PCSR(ch) (0x400 + 4 * (ch))
|
||||
#define PIPGM_PDUT(ch) (0x420 + 4 * (ch))
|
||||
#define PIPGM_PWMC(ch) (0x440 + 4 * (ch))
|
||||
|
||||
#define PIPGM_PWMC_PWMACT BIT(5)
|
||||
#define PIPGM_PWMC_CLK_MASK GENMASK(1, 0)
|
||||
#define PIPGM_PWMC_POLARITY_MASK GENMASK(5, 5)
|
||||
|
||||
struct visconti_pwm_chip {
|
||||
struct pwm_chip chip;
|
||||
void __iomem *base;
|
||||
};
|
||||
|
||||
static inline struct visconti_pwm_chip *visconti_pwm_from_chip(struct pwm_chip *chip)
|
||||
{
|
||||
return container_of(chip, struct visconti_pwm_chip, chip);
|
||||
}
|
||||
|
||||
static int visconti_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
const struct pwm_state *state)
|
||||
{
|
||||
struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip);
|
||||
u32 period, duty_cycle, pwmc0;
|
||||
|
||||
if (!state->enabled) {
|
||||
writel(0, priv->base + PIPGM_PCSR(pwm->hwpwm));
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* The biggest period the hardware can provide is
|
||||
* (0xffff << 3) * 1000 ns
|
||||
* This value fits easily in an u32, so simplify the maths by
|
||||
* capping the values to 32 bit integers.
|
||||
*/
|
||||
if (state->period > (0xffff << 3) * 1000)
|
||||
period = (0xffff << 3) * 1000;
|
||||
else
|
||||
period = state->period;
|
||||
|
||||
if (state->duty_cycle > period)
|
||||
duty_cycle = period;
|
||||
else
|
||||
duty_cycle = state->duty_cycle;
|
||||
|
||||
/*
|
||||
* The input clock runs fixed at 1 MHz, so we have only
|
||||
* microsecond resolution and so can divide by
|
||||
* NSEC_PER_SEC / CLKFREQ = 1000 without losing precision.
|
||||
*/
|
||||
period /= 1000;
|
||||
duty_cycle /= 1000;
|
||||
|
||||
if (!period)
|
||||
return -ERANGE;
|
||||
|
||||
/*
|
||||
* PWMC controls a divider that divides the input clk by a
|
||||
* power of two between 1 and 8. As a smaller divider yields
|
||||
* higher precision, pick the smallest possible one.
|
||||
*/
|
||||
if (period > 0xffff) {
|
||||
pwmc0 = ilog2(period >> 16);
|
||||
if (WARN_ON(pwmc0 > 3))
|
||||
return -EINVAL;
|
||||
} else {
|
||||
pwmc0 = 0;
|
||||
}
|
||||
|
||||
period >>= pwmc0;
|
||||
duty_cycle >>= pwmc0;
|
||||
|
||||
if (state->polarity == PWM_POLARITY_INVERSED)
|
||||
pwmc0 |= PIPGM_PWMC_PWMACT;
|
||||
writel(pwmc0, priv->base + PIPGM_PWMC(pwm->hwpwm));
|
||||
writel(duty_cycle, priv->base + PIPGM_PDUT(pwm->hwpwm));
|
||||
writel(period, priv->base + PIPGM_PCSR(pwm->hwpwm));
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void visconti_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
|
||||
struct pwm_state *state)
|
||||
{
|
||||
struct visconti_pwm_chip *priv = visconti_pwm_from_chip(chip);
|
||||
u32 period, duty, pwmc0, pwmc0_clk;
|
||||
|
||||
period = readl(priv->base + PIPGM_PCSR(pwm->hwpwm));
|
||||
duty = readl(priv->base + PIPGM_PDUT(pwm->hwpwm));
|
||||
pwmc0 = readl(priv->base + PIPGM_PWMC(pwm->hwpwm));
|
||||
pwmc0_clk = pwmc0 & PIPGM_PWMC_CLK_MASK;
|
||||
|
||||
state->period = (period << pwmc0_clk) * NSEC_PER_USEC;
|
||||
state->duty_cycle = (duty << pwmc0_clk) * NSEC_PER_USEC;
|
||||
if (pwmc0 & PIPGM_PWMC_POLARITY_MASK)
|
||||
state->polarity = PWM_POLARITY_INVERSED;
|
||||
else
|
||||
state->polarity = PWM_POLARITY_NORMAL;
|
||||
|
||||
state->enabled = true;
|
||||
}
|
||||
|
||||
static const struct pwm_ops visconti_pwm_ops = {
|
||||
.apply = visconti_pwm_apply,
|
||||
.get_state = visconti_pwm_get_state,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int visconti_pwm_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct visconti_pwm_chip *priv;
|
||||
int ret;
|
||||
|
||||
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
||||
if (!priv)
|
||||
return -ENOMEM;
|
||||
|
||||
priv->base = devm_platform_ioremap_resource(pdev, 0);
|
||||
if (IS_ERR(priv->base))
|
||||
return PTR_ERR(priv->base);
|
||||
|
||||
platform_set_drvdata(pdev, priv);
|
||||
|
||||
priv->chip.dev = dev;
|
||||
priv->chip.ops = &visconti_pwm_ops;
|
||||
priv->chip.npwm = 4;
|
||||
|
||||
ret = pwmchip_add(&priv->chip);
|
||||
if (ret < 0)
|
||||
return dev_err_probe(&pdev->dev, ret, "Cannot register visconti PWM\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int visconti_pwm_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct visconti_pwm_chip *priv = platform_get_drvdata(pdev);
|
||||
|
||||
pwmchip_remove(&priv->chip);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id visconti_pwm_of_match[] = {
|
||||
{ .compatible = "toshiba,visconti-pwm", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, visconti_pwm_of_match);
|
||||
|
||||
static struct platform_driver visconti_pwm_driver = {
|
||||
.driver = {
|
||||
.name = "pwm-visconti",
|
||||
.of_match_table = visconti_pwm_of_match,
|
||||
},
|
||||
.probe = visconti_pwm_probe,
|
||||
.remove = visconti_pwm_remove,
|
||||
};
|
||||
module_platform_driver(visconti_pwm_driver);
|
||||
|
||||
MODULE_LICENSE("GPL v2");
|
||||
MODULE_AUTHOR("Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>");
|
||||
MODULE_ALIAS("platform:pwm-visconti");
|
Loading…
Reference in New Issue