From 6f2e0d2c3bf0f8d322ab7516c57340c7189cca02 Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Thu, 27 Oct 2016 16:27:20 +0300 Subject: [PATCH] net/mlx4: Fix firmware command timeout during interrupt test Currently interrupt test that is part of ethtool selftest runs the check over all interrupt vectors of the device. In mlx4_en package part of interrupt vectors are uninitialized since mlx4_ib doesn't exist. This causes NOP FW command to time out. Change logic to test current port interrupt vectors only. Signed-off-by: Eugenia Emantayev Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlx4/en_selftest.c | 26 +++++++- drivers/net/ethernet/mellanox/mlx4/eq.c | 62 +++++++++---------- include/linux/mlx4/device.h | 3 +- 3 files changed, 55 insertions(+), 36 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c index b66e03d9711f..c06346a82496 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c @@ -118,6 +118,29 @@ mlx4_en_test_loopback_exit: return !loopback_ok; } +static int mlx4_en_test_interrupts(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + int err = 0; + int i = 0; + + err = mlx4_test_async(mdev->dev); + /* When not in MSI_X or slave, test only async */ + if (!(mdev->dev->flags & MLX4_FLAG_MSI_X) || mlx4_is_slave(mdev->dev)) + return err; + + /* A loop over all completion vectors of current port, + * for each vector check whether it works by mapping command + * completions to that vector and performing a NOP command + */ + for (i = 0; i < priv->rx_ring_num; i++) { + err = mlx4_test_interrupt(mdev->dev, priv->rx_cq[i]->vector); + if (err) + break; + } + + return err; +} static int mlx4_en_test_link(struct mlx4_en_priv *priv) { @@ -151,7 +174,6 @@ static int mlx4_en_test_speed(struct mlx4_en_priv *priv) void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf) { struct mlx4_en_priv *priv = netdev_priv(dev); - struct mlx4_en_dev *mdev = priv->mdev; int i, carrier_ok; memset(buf, 0, sizeof(u64) * MLX4_EN_NUM_SELF_TEST); @@ -177,7 +199,7 @@ void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf) netif_carrier_on(dev); } - buf[0] = mlx4_test_interrupts(mdev->dev); + buf[0] = mlx4_en_test_interrupts(priv); buf[1] = mlx4_en_test_link(priv); buf[2] = mlx4_en_test_speed(priv); diff --git a/drivers/net/ethernet/mellanox/mlx4/eq.c b/drivers/net/ethernet/mellanox/mlx4/eq.c index cf8f8a72a801..cd3638e6fe25 100644 --- a/drivers/net/ethernet/mellanox/mlx4/eq.c +++ b/drivers/net/ethernet/mellanox/mlx4/eq.c @@ -1361,53 +1361,49 @@ void mlx4_cleanup_eq_table(struct mlx4_dev *dev) kfree(priv->eq_table.uar_map); } -/* A test that verifies that we can accept interrupts on all - * the irq vectors of the device. +/* A test that verifies that we can accept interrupts + * on the vector allocated for asynchronous events + */ +int mlx4_test_async(struct mlx4_dev *dev) +{ + return mlx4_NOP(dev); +} +EXPORT_SYMBOL(mlx4_test_async); + +/* A test that verifies that we can accept interrupts + * on the given irq vector of the tested port. * Interrupts are checked using the NOP command. */ -int mlx4_test_interrupts(struct mlx4_dev *dev) +int mlx4_test_interrupt(struct mlx4_dev *dev, int vector) { struct mlx4_priv *priv = mlx4_priv(dev); - int i; int err; - err = mlx4_NOP(dev); - /* When not in MSI_X, there is only one irq to check */ - if (!(dev->flags & MLX4_FLAG_MSI_X) || mlx4_is_slave(dev)) - return err; + /* Temporary use polling for command completions */ + mlx4_cmd_use_polling(dev); - /* A loop over all completion vectors, for each vector we will check - * whether it works by mapping command completions to that vector - * and performing a NOP command - */ - for(i = 0; !err && (i < dev->caps.num_comp_vectors); ++i) { - /* Make sure request_irq was called */ - if (!priv->eq_table.eq[i].have_irq) - continue; - - /* Temporary use polling for command completions */ - mlx4_cmd_use_polling(dev); - - /* Map the new eq to handle all asynchronous events */ - err = mlx4_MAP_EQ(dev, get_async_ev_mask(dev), 0, - priv->eq_table.eq[i].eqn); - if (err) { - mlx4_warn(dev, "Failed mapping eq for interrupt test\n"); - mlx4_cmd_use_events(dev); - break; - } - - /* Go back to using events */ - mlx4_cmd_use_events(dev); - err = mlx4_NOP(dev); + /* Map the new eq to handle all asynchronous events */ + err = mlx4_MAP_EQ(dev, get_async_ev_mask(dev), 0, + priv->eq_table.eq[MLX4_CQ_TO_EQ_VECTOR(vector)].eqn); + if (err) { + mlx4_warn(dev, "Failed mapping eq for interrupt test\n"); + goto out; } + /* Go back to using events */ + mlx4_cmd_use_events(dev); + err = mlx4_NOP(dev); + /* Return to default */ + mlx4_cmd_use_polling(dev); +out: mlx4_MAP_EQ(dev, get_async_ev_mask(dev), 0, priv->eq_table.eq[MLX4_EQ_ASYNC].eqn); + mlx4_cmd_use_events(dev); + return err; } -EXPORT_SYMBOL(mlx4_test_interrupts); +EXPORT_SYMBOL(mlx4_test_interrupt); bool mlx4_is_eq_vector_valid(struct mlx4_dev *dev, u8 port, int vector) { diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index f6a164297358..3be7abd6e722 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -1399,7 +1399,8 @@ void mlx4_fmr_unmap(struct mlx4_dev *dev, struct mlx4_fmr *fmr, u32 *lkey, u32 *rkey); int mlx4_fmr_free(struct mlx4_dev *dev, struct mlx4_fmr *fmr); int mlx4_SYNC_TPT(struct mlx4_dev *dev); -int mlx4_test_interrupts(struct mlx4_dev *dev); +int mlx4_test_interrupt(struct mlx4_dev *dev, int vector); +int mlx4_test_async(struct mlx4_dev *dev); int mlx4_query_diag_counters(struct mlx4_dev *dev, u8 op_modifier, const u32 offset[], u32 value[], size_t array_len, u8 port);