UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

OMAP: UART: omap_device conversions, remove implicit 8520 assumptions 

Major rework of OMAP UART init for omap_device conversion as well as
use with either 8250 driver or new omap-serial driver.

In preparation for a new omap-serial driver, remove 8250 assumptions
and dependencies from the serial core.

Convert UART core and PM support to use omap_device layer. Also add
support for both console on 8250 or omap-serial driver.

omap_device conversion:
- Convert clock API calls to omap_device calls
- Remove all static platform_data setup and configuration.  This is
  all done by the omap_device build phase.

Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
This commit is contained in:
Kevin Hilman 2010-09-27 20:19:38 +05:30
parent 046465b76a
commit 6f251e9db1
1 changed files with 261 additions and 270 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

531
arch/arm/mach-omap2/serial.c
View File

@ -19,19 +19,29 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/serial_8250.h>
#ifdef CONFIG_SERIAL_OMAP
#include <plat/omap-serial.h>
#endif
#include <plat/common.h>
#include <plat/board.h>
#include <plat/clock.h>
#include <plat/control.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include "prm.h"
#include "pm.h"
#include "cm.h"
#include "prm-regbits-34xx.h"
#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52
@ -48,6 +58,8 @@
*/
#define DEFAULT_TIMEOUT 0
#define MAX_UART_HWMOD_NAME_LEN 16
struct omap_uart_state {
int num;
int can_sleep;
@ -58,14 +70,21 @@ struct omap_uart_state {
void __iomem *wk_en;
u32 wk_mask;
u32 padconf;
u32 dma_enabled;
struct clk *ick;
struct clk *fck;
int clocked;
struct plat_serial8250_port *p;
int irq;
int regshift;
int irqflags;
void __iomem *membase;
resource_size_t mapbase;
struct list_head node;
struct platform_device pdev;
struct omap_hwmod *oh;
struct platform_device *pdev;
u32 errata;
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
@ -83,75 +102,33 @@ struct omap_uart_state {
};
static LIST_HEAD(uart_list);
static u8 num_uarts;
static struct plat_serial8250_port serial_platform_data0[] = {
{
.irq = 72,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
};
static struct plat_serial8250_port serial_platform_data1[] = {
{
.irq = 73,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
};
static struct plat_serial8250_port serial_platform_data2[] = {
{
.irq = 74,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
};
static struct plat_serial8250_port serial_platform_data3[] = {
{
.irq = 70,
.flags = UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
.flags = 0
}
};
void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
{
serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
}
static struct omap_device_pm_latency omap_uart_latency[] = {
{
.deactivate_func = omap_device_idle_hwmods,
.activate_func = omap_device_enable_hwmods,
.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
},
};
static inline unsigned int __serial_read_reg(struct uart_port *up,
int offset)
int offset)
{
offset <<= up->regshift;
return (unsigned int)__raw_readb(up->membase + offset);
}
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
static inline unsigned int serial_read_reg(struct omap_uart_state *uart,
int offset)
{
offset <<= up->regshift;
return (unsigned int)__raw_readb(up->membase + offset);
offset <<= uart->regshift;
return (unsigned int)__raw_readb(uart->membase + offset);
}
static inline void __serial_write_reg(struct uart_port *up, int offset,
@ -161,11 +138,11 @@ static inline void __serial_write_reg(struct uart_port *up, int offset,
__raw_writeb(value, up->membase + offset);
}
static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
static inline void serial_write_reg(struct omap_uart_state *uart, int offset,
int value)
{
offset <<= p->regshift;
__raw_writeb(value, p->membase + offset);
offset <<= uart->regshift;
__raw_writeb(value, uart->membase + offset);
}
/*
@ -173,14 +150,12 @@ static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
* properly. Note that the TX watermark initialization may not be needed
* once the 8250.c watermark handling code is merged.
*/
static inline void __init omap_uart_reset(struct omap_uart_state *uart)
{
struct plat_serial8250_port *p = uart->p;
serial_write_reg(p, UART_OMAP_MDR1, 0x07);
serial_write_reg(p, UART_OMAP_SCR, 0x08);
serial_write_reg(p, UART_OMAP_MDR1, 0x00);
serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
serial_write_reg(uart, UART_OMAP_MDR1, 0x07);
serial_write_reg(uart, UART_OMAP_SCR, 0x08);
serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
}
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
@ -197,24 +172,23 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart)
static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val,
u8 fcr_val)
{
struct plat_serial8250_port *p = uart->p;
u8 timeout = 255;
serial_write_reg(p, UART_OMAP_MDR1, mdr1_val);
serial_write_reg(uart, UART_OMAP_MDR1, mdr1_val);
udelay(2);
serial_write_reg(p, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT |
serial_write_reg(uart, UART_FCR, fcr_val | UART_FCR_CLEAR_XMIT |
UART_FCR_CLEAR_RCVR);
/*
* Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and
* TX_FIFO_E bit is 1.
*/
while (UART_LSR_THRE != (serial_read_reg(p, UART_LSR) &
while (UART_LSR_THRE != (serial_read_reg(uart, UART_LSR) &
(UART_LSR_THRE | UART_LSR_DR))) {
timeout--;
if (!timeout) {
/* Should *never* happen. we warn and carry on */
dev_crit(&uart->pdev.dev, "Errata i202: timedout %x\n",
serial_read_reg(p, UART_LSR));
dev_crit(&uart->pdev->dev, "Errata i202: timedout %x\n",
serial_read_reg(uart, UART_LSR));
break;
}
udelay(1);
@ -224,23 +198,22 @@ static void omap_uart_mdr1_errataset(struct omap_uart_state *uart, u8 mdr1_val,
static void omap_uart_save_context(struct omap_uart_state *uart)
{
u16 lcr = 0;
struct plat_serial8250_port *p = uart->p;
if (!enable_off_mode)
return;
lcr = serial_read_reg(p, UART_LCR);
serial_write_reg(p, UART_LCR, 0xBF);
uart->dll = serial_read_reg(p, UART_DLL);
uart->dlh = serial_read_reg(p, UART_DLM);
serial_write_reg(p, UART_LCR, lcr);
uart->ier = serial_read_reg(p, UART_IER);
uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
uart->scr = serial_read_reg(p, UART_OMAP_SCR);
uart->wer = serial_read_reg(p, UART_OMAP_WER);
serial_write_reg(p, UART_LCR, 0x80);
uart->mcr = serial_read_reg(p, UART_MCR);
serial_write_reg(p, UART_LCR, lcr);
lcr = serial_read_reg(uart, UART_LCR);
serial_write_reg(uart, UART_LCR, 0xBF);
uart->dll = serial_read_reg(uart, UART_DLL);
uart->dlh = serial_read_reg(uart, UART_DLM);
serial_write_reg(uart, UART_LCR, lcr);
uart->ier = serial_read_reg(uart, UART_IER);
uart->sysc = serial_read_reg(uart, UART_OMAP_SYSC);
uart->scr = serial_read_reg(uart, UART_OMAP_SCR);
uart->wer = serial_read_reg(uart, UART_OMAP_WER);
serial_write_reg(uart, UART_LCR, 0x80);
uart->mcr = serial_read_reg(uart, UART_MCR);
serial_write_reg(uart, UART_LCR, lcr);
uart->context_valid = 1;
}
@ -248,7 +221,6 @@ static void omap_uart_save_context(struct omap_uart_state *uart)
static void omap_uart_restore_context(struct omap_uart_state *uart)
{
u16 efr = 0;
struct plat_serial8250_port *p = uart->p;
if (!enable_off_mode)
return;
@ -261,29 +233,30 @@ static void omap_uart_restore_context(struct omap_uart_state *uart)
if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
omap_uart_mdr1_errataset(uart, 0x07, 0xA0);
else
serial_write_reg(p, UART_OMAP_MDR1, 0x7);
serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
efr = serial_read_reg(p, UART_EFR);
serial_write_reg(p, UART_EFR, UART_EFR_ECB);
serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
serial_write_reg(p, UART_IER, 0x0);
serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
serial_write_reg(p, UART_DLL, uart->dll);
serial_write_reg(p, UART_DLM, uart->dlh);
serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
serial_write_reg(p, UART_IER, uart->ier);
serial_write_reg(p, UART_LCR, 0x80);
serial_write_reg(p, UART_MCR, uart->mcr);
serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
serial_write_reg(p, UART_EFR, efr);
serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
serial_write_reg(p, UART_OMAP_SCR, uart->scr);
serial_write_reg(p, UART_OMAP_WER, uart->wer);
serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
serial_write_reg(uart, UART_OMAP_MDR1, 0x7);
serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
efr = serial_read_reg(uart, UART_EFR);
serial_write_reg(uart, UART_EFR, UART_EFR_ECB);
serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
serial_write_reg(uart, UART_IER, 0x0);
serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
serial_write_reg(uart, UART_DLL, uart->dll);
serial_write_reg(uart, UART_DLM, uart->dlh);
serial_write_reg(uart, UART_LCR, 0x0); /* Operational mode */
serial_write_reg(uart, UART_IER, uart->ier);
serial_write_reg(uart, UART_LCR, 0x80);
serial_write_reg(uart, UART_MCR, uart->mcr);
serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
serial_write_reg(uart, UART_EFR, efr);
serial_write_reg(uart, UART_LCR, UART_LCR_WLEN8);
serial_write_reg(uart, UART_OMAP_SCR, uart->scr);
serial_write_reg(uart, UART_OMAP_WER, uart->wer);
serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc);
if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
omap_uart_mdr1_errataset(uart, 0x00, 0xA1);
else
serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
/* UART 16x mode */
serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
}
#else
static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
@ -295,8 +268,7 @@ static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
if (uart->clocked)
return;
clk_enable(uart->ick);
clk_enable(uart->fck);
omap_device_enable(uart->pdev);
uart->clocked = 1;
omap_uart_restore_context(uart);
}
@ -310,8 +282,7 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
omap_uart_save_context(uart);
uart->clocked = 0;
clk_disable(uart->ick);
clk_disable(uart->fck);
omap_device_idle(uart->pdev);
}
static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
@ -349,18 +320,24 @@ static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
}
static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
int enable)
int enable)
{
struct plat_serial8250_port *p = uart->p;
u16 sysc;
u8 idlemode;
sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
if (enable)
sysc |= 0x2 << 3;
else
sysc |= 0x1 << 3;
if (enable) {
/**
* Errata 2.15: [UART]:Cannot Acknowledge Idle Requests
* in Smartidle Mode When Configured for DMA Operations.
*/
if (uart->dma_enabled)
idlemode = HWMOD_IDLEMODE_FORCE;
else
idlemode = HWMOD_IDLEMODE_SMART;
} else {
idlemode = HWMOD_IDLEMODE_NO;
}
serial_write_reg(p, UART_OMAP_SYSC, sysc);
omap_hwmod_set_slave_idlemode(uart->oh, idlemode);
}
static void omap_uart_block_sleep(struct omap_uart_state *uart)
@ -377,7 +354,7 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart)
static void omap_uart_allow_sleep(struct omap_uart_state *uart)
{
if (device_may_wakeup(&uart->pdev.dev))
if (device_may_wakeup(&uart->pdev->dev))
omap_uart_enable_wakeup(uart);
else
omap_uart_disable_wakeup(uart);
@ -472,6 +449,7 @@ int omap_uart_can_sleep(void)
* UART will not idle or sleep for its timeout period.
*
**/
/* static int first_interrupt; */
static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
{
struct omap_uart_state *uart = dev_id;
@ -483,7 +461,6 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
static void omap_uart_idle_init(struct omap_uart_state *uart)
{
struct plat_serial8250_port *p = uart->p;
int ret;
uart->can_sleep = 0;
@ -546,9 +523,9 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
uart->padconf = 0;
}
p->irqflags |= IRQF_SHARED;
ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
"serial idle", (void *)uart);
uart->irqflags |= IRQF_SHARED;
ret = request_threaded_irq(uart->irq, NULL, omap_uart_interrupt,
IRQF_SHARED, "serial idle", (void *)uart);
WARN_ON(ret);
}
@ -559,10 +536,13 @@ void omap_uart_enable_irqs(int enable)
list_for_each_entry(uart, &uart_list, node) {
if (enable)
ret = request_irq(uart->p->irq, omap_uart_interrupt,
IRQF_SHARED, "serial idle", (void *)uart);
ret = request_threaded_irq(uart->irq, NULL,
omap_uart_interrupt,
IRQF_SHARED,
"serial idle",
(void *)uart);
else
free_irq(uart->p->irq, (void *)uart);
free_irq(uart->irq, (void *)uart);
}
}
@ -570,10 +550,9 @@ static ssize_t sleep_timeout_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct platform_device *pdev = container_of(dev,
struct platform_device, dev);
struct omap_uart_state *uart = container_of(pdev,
struct omap_uart_state, pdev);
struct platform_device *pdev = to_platform_device(dev);
struct omap_device *odev = to_omap_device(pdev);
struct omap_uart_state *uart = odev->hwmods[0]->dev_attr;
return sprintf(buf, "%u\n", uart->timeout / HZ);
}
@ -582,10 +561,9 @@ static ssize_t sleep_timeout_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t n)
{
struct platform_device *pdev = container_of(dev,
struct platform_device, dev);
struct omap_uart_state *uart = container_of(pdev,
struct omap_uart_state, pdev);
struct platform_device *pdev = to_platform_device(dev);
struct omap_device *odev = to_omap_device(pdev);
struct omap_uart_state *uart = odev->hwmods[0]->dev_attr;
unsigned int value;
if (sscanf(buf, "%u", &value) != 1) {
@ -608,48 +586,11 @@ static DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show,
#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
#else
static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
static void omap_uart_block_sleep(struct omap_uart_state *uart) {}
#define DEV_CREATE_FILE(dev, attr)
#endif /* CONFIG_PM */
static struct omap_uart_state omap_uart[] = {
{
.pdev = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data0,
},
},
}, {
.pdev = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev = {
.platform_data = serial_platform_data1,
},
},
}, {
.pdev = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM2,
.dev = {
.platform_data = serial_platform_data2,
},
},
},
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
{
.pdev = {
.name = "serial8250",
.id = 3,
.dev = {
.platform_data = serial_platform_data3,
},
},
},
#endif
};
#ifndef CONFIG_SERIAL_OMAP
/*
* Override the default 8250 read handler: mem_serial_in()
* Empty RX fifo read causes an abort on omap3630 and omap4
@ -682,71 +623,44 @@ static void serial_out_override(struct uart_port *up, int offset, int value)
}
__serial_write_reg(up, offset, value);
}
#endif
void __init omap_serial_early_init(void)
{
int i, nr_ports;
char name[16];
int i = 0;
if (!(cpu_is_omap3630() || cpu_is_omap4430()))
nr_ports = 3;
else
nr_ports = ARRAY_SIZE(omap_uart);
do {
char oh_name[MAX_UART_HWMOD_NAME_LEN];
struct omap_hwmod *oh;
struct omap_uart_state *uart;
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
* if not needed.
*/
snprintf(oh_name, MAX_UART_HWMOD_NAME_LEN,
"uart%d", i + 1);
oh = omap_hwmod_lookup(oh_name);
if (!oh)
break;
for (i = 0; i < nr_ports; i++) {
struct omap_uart_state *uart = &omap_uart[i];
struct platform_device *pdev = &uart->pdev;
struct device *dev = &pdev->dev;
struct plat_serial8250_port *p = dev->platform_data;
uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
if (WARN_ON(!uart))
return;
uart->oh = oh;
uart->num = i++;
list_add_tail(&uart->node, &uart_list);
num_uarts++;
/* Don't map zero-based physical address */
if (p->mapbase == 0) {
dev_warn(dev, "no physical address for uart#%d,"
" so skipping early_init...\n", i);
continue;
}
/*
* Module 4KB + L4 interconnect 4KB
* Static mapping, never released
* NOTE: omap_hwmod_init() has not yet been called,
* so no hwmod functions will work yet.
*/
p->membase = ioremap(p->mapbase, SZ_8K);
if (!p->membase) {
dev_err(dev, "ioremap failed for uart%i\n", i + 1);
continue;
}
sprintf(name, "uart%d_ick", i + 1);
uart->ick = clk_get(NULL, name);
if (IS_ERR(uart->ick)) {
dev_err(dev, "Could not get uart%d_ick\n", i + 1);
uart->ick = NULL;
}
sprintf(name, "uart%d_fck", i+1);
uart->fck = clk_get(NULL, name);
if (IS_ERR(uart->fck)) {
dev_err(dev, "Could not get uart%d_fck\n", i + 1);
uart->fck = NULL;
}
/* FIXME: Remove this once the clkdev is ready */
if (!cpu_is_omap44xx()) {
if (!uart->ick || !uart->fck)
continue;
}
uart->num = i;
p->private_data = uart;
uart->p = p;
if (cpu_is_omap44xx())
p->irq += 32;
}
/*
* During UART early init, device need to be probed
* to determine SoC specific init before omap_device
* is ready. Therefore, don't allow idle here
*/
uart->oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
} while (1);
}
/**
@ -763,53 +677,135 @@ void __init omap_serial_early_init(void)
void __init omap_serial_init_port(int port)
{
struct omap_uart_state *uart;
struct platform_device *pdev;
struct device *dev;
struct omap_hwmod *oh;
struct omap_device *od;
void *pdata = NULL;
u32 pdata_size = 0;
char *name;
#ifndef CONFIG_SERIAL_OMAP
struct plat_serial8250_port ports[2] = {
{},
{.flags = 0},
};
struct plat_serial8250_port *p = &ports[0];
#else
struct omap_uart_port_info omap_up;
#endif
BUG_ON(port < 0);
BUG_ON(port >= ARRAY_SIZE(omap_uart));
uart = &omap_uart[port];
pdev = &uart->pdev;
dev = &pdev->dev;
/* Don't proceed if there's no clocks available */
if (unlikely(!uart->ick || !uart->fck)) {
WARN(1, "%s: can't init uart%d, no clocks available\n",
kobject_name(&dev->kobj), port);
if (WARN_ON(port < 0))
return;
}
omap_uart_enable_clocks(uart);
omap_uart_reset(uart);
omap_uart_idle_init(uart);
list_add_tail(&uart->node, &uart_list);
if (WARN_ON(platform_device_register(pdev)))
if (WARN_ON(port >= num_uarts))
return;
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
device_init_wakeup(dev, true);
DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
}
list_for_each_entry(uart, &uart_list, node)
if (port == uart->num)
break;
oh = uart->oh;
uart->dma_enabled = 0;
#ifndef CONFIG_SERIAL_OMAP
name = "serial8250";
/*
* !! 8250 driver does not use standard IORESOURCE* It
* has it's own custom pdata that can be taken from
* the hwmod resource data. But, this needs to be
* done after the build.
*
* ?? does it have to be done before the register ??
* YES, because platform_device_data_add() copies
* pdata, it does not use a pointer.
*/
p->flags = UPF_BOOT_AUTOCONF;
p->iotype = UPIO_MEM;
p->regshift = 2;
p->uartclk = OMAP24XX_BASE_BAUD * 16;
p->irq = oh->mpu_irqs[0].irq;
p->mapbase = oh->slaves[0]->addr->pa_start;
p->membase = omap_hwmod_get_mpu_rt_va(oh);
p->irqflags = IRQF_SHARED;
p->private_data = uart;
/*
* omap44xx: Never read empty UART fifo
* omap3xxx: Never read empty UART fifo on UARTs
* with IP rev >=0x52
*/
uart->regshift = p->regshift;
uart->membase = p->membase;
if (cpu_is_omap44xx())
uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
else if ((serial_read_reg(uart, UART_OMAP_MVER) & 0xFF)
>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
uart->errata |= UART_ERRATA_FIFO_FULL_ABORT;
if (uart->errata & UART_ERRATA_FIFO_FULL_ABORT) {
uart->p->serial_in = serial_in_override;
uart->p->serial_out = serial_out_override;
p->serial_in = serial_in_override;
p->serial_out = serial_out_override;
}
pdata = &ports[0];
pdata_size = 2 * sizeof(struct plat_serial8250_port);
#else
name = DRIVER_NAME;
omap_up.dma_enabled = uart->dma_enabled;
omap_up.uartclk = OMAP24XX_BASE_BAUD * 16;
omap_up.mapbase = oh->slaves[0]->addr->pa_start;
omap_up.membase = omap_hwmod_get_mpu_rt_va(oh);
omap_up.irqflags = IRQF_SHARED;
omap_up.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
pdata = &omap_up;
pdata_size = sizeof(struct omap_uart_port_info);
#endif
if (WARN_ON(!oh))
return;
od = omap_device_build(name, uart->num, oh, pdata, pdata_size,
omap_uart_latency,
ARRAY_SIZE(omap_uart_latency), false);
WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n",
name, oh->name);
uart->irq = oh->mpu_irqs[0].irq;
uart->regshift = 2;
uart->mapbase = oh->slaves[0]->addr->pa_start;
uart->membase = omap_hwmod_get_mpu_rt_va(oh);
uart->pdev = &od->pdev;
oh->dev_attr = uart;
/*
* Because of early UART probing, UART did not get idled
* on init. Now that omap_device is ready, ensure full idle
* before doing omap_device_enable().
*/
omap_hwmod_idle(uart->oh);
omap_device_enable(uart->pdev);
omap_uart_idle_init(uart);
omap_uart_reset(uart);
omap_hwmod_enable_wakeup(uart->oh);
omap_device_idle(uart->pdev);
/*
* Need to block sleep long enough for interrupt driven
* driver to start. Console driver is in polling mode
* so device needs to be kept enabled while polling driver
* is in use.
*/
if (uart->timeout)
uart->timeout = (30 * HZ);
omap_uart_block_sleep(uart);
uart->timeout = DEFAULT_TIMEOUT;
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
device_init_wakeup(&od->pdev.dev, true);
DEV_CREATE_FILE(&od->pdev.dev, &dev_attr_sleep_timeout);
}
/* Enable the MDR1 errata for OMAP3 */
@ -826,13 +822,8 @@ void __init omap_serial_init_port(int port)
*/
void __init omap_serial_init(void)
{
int i, nr_ports;
struct omap_uart_state *uart;
if (!(cpu_is_omap3630() || cpu_is_omap4430()))
nr_ports = 3;
else
nr_ports = ARRAY_SIZE(omap_uart);
for (i = 0; i < nr_ports; i++)
omap_serial_init_port(i);
list_for_each_entry(uart, &uart_list, node)
omap_serial_init_port(uart->num);
}