ARM: dts: Add support for dra718-evm
The DRA718-evm is a board based on TI's DRA718 processor targeting BOM-optimized entry infotainment systems and is a reduced pin and software compatible derivative of the DRA72 ES2.0 processor. This platform features: - 2GB of DDR3L - Dual 1Gbps Ethernet - HDMI, - uSD - 8GB eMMC - CAN - PCIe - USB3.0 - Video Input Port - LP873x PMIC More information can be found here[1]. Adding support for this board while reusing the data available in dra72-evm-common.dtsi. [1] http://www.ti.com/product/dra718 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Nishanth Menon
Tony Lindgren
parent
5d080aa306
commit
6eebfeb9cf
|
|
@ -590,7 +590,8 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
|
|||
am572x-idk.dtb \
|
||||
dra7-evm.dtb \
|
||||
dra72-evm.dtb \
|
||||
dra72-evm-revc.dtb
|
||||
dra72-evm-revc.dtb \
|
||||
dra71-evm.dtb
|
||||
dtb-$(CONFIG_ARCH_ORION5X) += \
|
||||
orion5x-kuroboxpro.dtb \
|
||||
orion5x-lacie-d2-network.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,230 @@
|
|||
/*
|
||||
* Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include "dra72-evm-common.dtsi"
|
||||
#include <dt-bindings/net/ti-dp83867.h>
|
||||
|
||||
/ {
|
||||
compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7";
|
||||
model = "TI DRA718 EVM";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
|
||||
};
|
||||
|
||||
vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "vddshv8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&evm_5v0>;
|
||||
|
||||
gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
|
||||
states = <1800000 0x0
|
||||
3000000 0x1>;
|
||||
};
|
||||
|
||||
poweroff: gpio-poweroff {
|
||||
compatible = "gpio-poweroff";
|
||||
gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
|
||||
input;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
lp8733: lp8733@60 {
|
||||
compatible = "ti,lp8733";
|
||||
reg = <0x60>;
|
||||
|
||||
buck0-in-supply =<&vsys_3v3>;
|
||||
buck1-in-supply =<&vsys_3v3>;
|
||||
ldo0-in-supply =<&evm_5v0>;
|
||||
ldo1-in-supply =<&evm_5v0>;
|
||||
|
||||
lp8733_regulators: regulators {
|
||||
lp8733_buck0_reg: buck0 {
|
||||
/* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */
|
||||
regulator-name = "lp8733-buck0";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
lp8733_buck1_reg: buck1 {
|
||||
/* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */
|
||||
regulator-name = "lp8733-buck1";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
lp8733_ldo0_reg: ldo0 {
|
||||
/* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
|
||||
regulator-name = "lp8733-ldo0";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
lp8733_ldo1_reg: ldo1 {
|
||||
/* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
|
||||
regulator-name = "lp8733-ldo1";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
lp8732: lp8732@61 {
|
||||
compatible = "ti,lp8732";
|
||||
reg = <0x61>;
|
||||
|
||||
buck0-in-supply =<&vsys_3v3>;
|
||||
buck1-in-supply =<&vsys_3v3>;
|
||||
ldo0-in-supply =<&vsys_3v3>;
|
||||
ldo1-in-supply =<&vsys_3v3>;
|
||||
|
||||
lp8732_regulators: regulators {
|
||||
lp8732_buck0_reg: buck0 {
|
||||
/* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */
|
||||
regulator-name = "lp8732-buck0";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
lp8732_buck1_reg: buck1 {
|
||||
/* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */
|
||||
regulator-name = "lp8732-buck1";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
lp8732_ldo0_reg: ldo0 {
|
||||
/* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
|
||||
regulator-name = "lp8732-ldo0";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
lp8732_ldo1_reg: ldo1 {
|
||||
/* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
|
||||
regulator-name = "lp8732-ldo1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcf_gpio_21 {
|
||||
interrupt-parent = <&gpio7>;
|
||||
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
|
||||
&pcf_hdmi {
|
||||
p0 {
|
||||
/*
|
||||
* PM_OEn to High: Disable routing I2C3 to PM_I2C
|
||||
* With this PM_SEL(p3) should not matter
|
||||
*/
|
||||
gpio-hog;
|
||||
gpios = <0 GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "pm_oe_n";
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
|
||||
};
|
||||
|
||||
&mac {
|
||||
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
|
||||
<&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */
|
||||
<&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */
|
||||
dual_emac;
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy_id = <&davinci_mdio>, <2>;
|
||||
phy-mode = "rgmii-id";
|
||||
dual_emac_res_vlan = <1>;
|
||||
};
|
||||
|
||||
&cpsw_emac1 {
|
||||
phy_id = <&davinci_mdio>, <3>;
|
||||
phy-mode = "rgmii-id";
|
||||
dual_emac_res_vlan = <2>;
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
dp83867_0: ethernet-phy@2 {
|
||||
reg = <2>;
|
||||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
||||
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
|
||||
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
|
||||
ti,impedance-control = <0x1f>;
|
||||
};
|
||||
|
||||
dp83867_1: ethernet-phy@3 {
|
||||
reg = <3>;
|
||||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
||||
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
|
||||
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
|
||||
ti,impedance-control = <0x1f>;
|
||||
};
|
||||
};
|
||||
|
||||
/* No Sata on this device */
|
||||
&sata_phy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* No RTC on this device */
|
||||
&rtc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
phy-supply = <&lp8733_ldo1_reg>;
|
||||
};
|
||||
|
||||
&usb2_phy2 {
|
||||
phy-supply = <&lp8733_ldo1_reg>;
|
||||
};
|
||||
|
||||
&dss {
|
||||
/* Supplied by VDA_1V8_PLL */
|
||||
vdda_video-supply = <&lp8732_ldo0_reg>;
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
/* Supplied by VDA_1V8_PHY */
|
||||
vdda_video-supply = <&lp8732_ldo1_reg>;
|
||||
};
|
||||
|
|
@ -29,7 +29,8 @@
|
|||
};
|
||||
|
||||
evm_5v0: fixedregulator-evm5v0 {
|
||||
/* Output 1 of TPS43351QDAPRQ1 */
|
||||
/* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
|
||||
/* Output 1 of LM5140QRWGTQ1 on dra71-evm */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "evm_5v0";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
|
|
@ -40,7 +41,8 @@
|
|||
};
|
||||
|
||||
vsys_3v3: fixedregulator-vsys3v3 {
|
||||
/* Output 2 of TPS43351QDAPRQ1 */
|
||||
/* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
|
||||
/* Output 2 of LM5140QRWGTQ1 on dra71-evm */
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vsys_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
|
|
|||
Loading…
Reference in New Issue