Staging: iio: add driver for MAX517/518/519
IIO Driver for Maxim MAX517, MAX518 and MAX519 DAC Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Roland Stigge
Greg Kroah-Hartman
parent
18545cfd36
commit
6ddc5fb43e
|
|
@ -0,0 +1,41 @@
|
||||||
|
Kernel driver max517
|
||||||
|
====================
|
||||||
|
|
||||||
|
Supported chips:
|
||||||
|
* Maxim MAX517, MAX518, MAX519
|
||||||
|
Prefix: 'max517'
|
||||||
|
Datasheet: Publicly available at the Maxim website
|
||||||
|
http://www.maxim-ic.com/
|
||||||
|
|
||||||
|
Author:
|
||||||
|
Roland Stigge <stigge@antcom.de>
|
||||||
|
|
||||||
|
Description
|
||||||
|
-----------
|
||||||
|
|
||||||
|
The Maxim MAX517/518/519 is an 8-bit DAC on the I2C bus. The following table
|
||||||
|
shows the different feature sets of the variants MAX517, MAX518 and MAX519:
|
||||||
|
|
||||||
|
Feature MAX517 MAX518 MAX519
|
||||||
|
--------------------------------------------------------------------------
|
||||||
|
One output channel X
|
||||||
|
Two output channels X X
|
||||||
|
Simultaneous output updates X X
|
||||||
|
Supply voltage as reference X
|
||||||
|
Separate reference input X
|
||||||
|
Reference input for each DAC X
|
||||||
|
|
||||||
|
Via the iio sysfs interface, there are three attributes available: out1_raw,
|
||||||
|
out2_raw and out12_raw. With out1_raw and out2_raw, the current output values
|
||||||
|
(0..255) of the DACs can be written to the device. out12_raw can be used to set
|
||||||
|
both output channel values simultaneously.
|
||||||
|
|
||||||
|
With MAX517, only out1_raw is available.
|
||||||
|
|
||||||
|
Via out1_scale (and where appropriate, out2_scale), the current scaling factor
|
||||||
|
in mV can be read.
|
||||||
|
|
||||||
|
When the operating system goes to a power down state, the Power Down function
|
||||||
|
of the chip is activated, reducing the supply current to 4uA.
|
||||||
|
|
||||||
|
On power-up, the device is in 0V-output state.
|
||||||
|
|
@ -19,3 +19,13 @@ config AD5446
|
||||||
|
|
||||||
To compile this driver as a module, choose M here: the
|
To compile this driver as a module, choose M here: the
|
||||||
module will be called ad5446.
|
module will be called ad5446.
|
||||||
|
|
||||||
|
config MAX517
|
||||||
|
tristate "Maxim MAX517/518/519 DAC driver"
|
||||||
|
depends on I2C && EXPERIMENTAL
|
||||||
|
help
|
||||||
|
If you say yes here you get support for the Maxim chips MAX517,
|
||||||
|
MAX518 and MAX519 (I2C 8-Bit DACs with rail-to-rail outputs).
|
||||||
|
|
||||||
|
This driver can also be built as a module. If so, the module
|
||||||
|
will be called max517.
|
||||||
|
|
|
||||||
|
|
@ -4,3 +4,4 @@
|
||||||
|
|
||||||
obj-$(CONFIG_AD5624R_SPI) += ad5624r_spi.o
|
obj-$(CONFIG_AD5624R_SPI) += ad5624r_spi.o
|
||||||
obj-$(CONFIG_AD5446) += ad5446.o
|
obj-$(CONFIG_AD5446) += ad5446.o
|
||||||
|
obj-$(CONFIG_MAX517) += max517.o
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,293 @@
|
||||||
|
/*
|
||||||
|
* max517.c - Support for Maxim MAX517, MAX518 and MAX519
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010, 2011 Roland Stigge <stigge@antcom.de>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/slab.h>
|
||||||
|
#include <linux/jiffies.h>
|
||||||
|
#include <linux/i2c.h>
|
||||||
|
#include <linux/err.h>
|
||||||
|
|
||||||
|
#include "../iio.h"
|
||||||
|
#include "dac.h"
|
||||||
|
|
||||||
|
#include "max517.h"
|
||||||
|
|
||||||
|
#define MAX517_DRV_NAME "max517"
|
||||||
|
|
||||||
|
/* Commands */
|
||||||
|
#define COMMAND_CHANNEL0 0x00
|
||||||
|
#define COMMAND_CHANNEL1 0x01 /* for MAX518 and MAX519 */
|
||||||
|
#define COMMAND_PD 0x08 /* Power Down */
|
||||||
|
|
||||||
|
enum max517_device_ids {
|
||||||
|
ID_MAX517,
|
||||||
|
ID_MAX518,
|
||||||
|
ID_MAX519,
|
||||||
|
};
|
||||||
|
|
||||||
|
struct max517_data {
|
||||||
|
struct iio_dev *indio_dev;
|
||||||
|
unsigned short vref_mv[2];
|
||||||
|
};
|
||||||
|
|
||||||
|
/*
|
||||||
|
* channel: bit 0: channel 1
|
||||||
|
* bit 1: channel 2
|
||||||
|
* (this way, it's possible to set both channels at once)
|
||||||
|
*/
|
||||||
|
static ssize_t max517_set_value(struct device *dev,
|
||||||
|
struct device_attribute *attr,
|
||||||
|
const char *buf, size_t count, int channel)
|
||||||
|
{
|
||||||
|
struct i2c_client *client = to_i2c_client(dev);
|
||||||
|
u8 outbuf[4]; /* 1x or 2x command + value */
|
||||||
|
int outbuf_size = 0;
|
||||||
|
int res;
|
||||||
|
long val;
|
||||||
|
|
||||||
|
res = strict_strtol(buf, 10, &val);
|
||||||
|
|
||||||
|
if (res)
|
||||||
|
return res;
|
||||||
|
|
||||||
|
if (val < 0 || val > 255)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
if (channel & 1) {
|
||||||
|
outbuf[outbuf_size++] = COMMAND_CHANNEL0;
|
||||||
|
outbuf[outbuf_size++] = val;
|
||||||
|
}
|
||||||
|
if (channel & 2) {
|
||||||
|
outbuf[outbuf_size++] = COMMAND_CHANNEL1;
|
||||||
|
outbuf[outbuf_size++] = val;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* At this point, there are always 1 or 2 two-byte commands in
|
||||||
|
* outbuf. With 2 commands, the device can set two outputs
|
||||||
|
* simultaneously, latching the values upon the end of the I2C
|
||||||
|
* transfer.
|
||||||
|
*/
|
||||||
|
|
||||||
|
res = i2c_master_send(client, outbuf, outbuf_size);
|
||||||
|
if (res < 0)
|
||||||
|
return res;
|
||||||
|
|
||||||
|
return count;
|
||||||
|
}
|
||||||
|
|
||||||
|
static ssize_t max517_set_value_1(struct device *dev,
|
||||||
|
struct device_attribute *attr,
|
||||||
|
const char *buf, size_t count)
|
||||||
|
{
|
||||||
|
return max517_set_value(dev, attr, buf, count, 1);
|
||||||
|
}
|
||||||
|
static IIO_DEV_ATTR_OUT_RAW(1, max517_set_value_1, 0);
|
||||||
|
|
||||||
|
static ssize_t max517_set_value_2(struct device *dev,
|
||||||
|
struct device_attribute *attr,
|
||||||
|
const char *buf, size_t count)
|
||||||
|
{
|
||||||
|
return max517_set_value(dev, attr, buf, count, 2);
|
||||||
|
}
|
||||||
|
static IIO_DEV_ATTR_OUT_RAW(2, max517_set_value_2, 1);
|
||||||
|
|
||||||
|
static ssize_t max517_set_value_both(struct device *dev,
|
||||||
|
struct device_attribute *attr,
|
||||||
|
const char *buf, size_t count)
|
||||||
|
{
|
||||||
|
return max517_set_value(dev, attr, buf, count, 3);
|
||||||
|
}
|
||||||
|
static IIO_DEVICE_ATTR_NAMED(out1and2_raw, out1&2_raw, S_IWUSR, NULL,
|
||||||
|
max517_set_value_both, -1);
|
||||||
|
|
||||||
|
static ssize_t max517_show_scale(struct device *dev,
|
||||||
|
struct device_attribute *attr,
|
||||||
|
char *buf, int channel)
|
||||||
|
{
|
||||||
|
struct iio_dev *dev_info = dev_get_drvdata(dev);
|
||||||
|
struct max517_data *data = iio_dev_get_devdata(dev_info);
|
||||||
|
/* Corresponds to Vref / 2^(bits) */
|
||||||
|
unsigned int scale_uv = (data->vref_mv[channel - 1] * 1000) >> 8;
|
||||||
|
|
||||||
|
return sprintf(buf, "%d.%03d\n", scale_uv / 1000, scale_uv % 1000);
|
||||||
|
}
|
||||||
|
|
||||||
|
static ssize_t max517_show_scale1(struct device *dev,
|
||||||
|
struct device_attribute *attr,
|
||||||
|
char *buf)
|
||||||
|
{
|
||||||
|
return max517_show_scale(dev, attr, buf, 1);
|
||||||
|
}
|
||||||
|
static IIO_DEVICE_ATTR(out1_scale, S_IRUGO, max517_show_scale1, NULL, 0);
|
||||||
|
|
||||||
|
static ssize_t max517_show_scale2(struct device *dev,
|
||||||
|
struct device_attribute *attr,
|
||||||
|
char *buf)
|
||||||
|
{
|
||||||
|
return max517_show_scale(dev, attr, buf, 2);
|
||||||
|
}
|
||||||
|
static IIO_DEVICE_ATTR(out2_scale, S_IRUGO, max517_show_scale2, NULL, 0);
|
||||||
|
|
||||||
|
/* On MAX517 variant, we have two outputs */
|
||||||
|
static struct attribute *max517_attributes[] = {
|
||||||
|
&iio_dev_attr_out1_raw.dev_attr.attr,
|
||||||
|
&iio_dev_attr_out1_scale.dev_attr.attr,
|
||||||
|
NULL
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct attribute_group max517_attribute_group = {
|
||||||
|
.attrs = max517_attributes,
|
||||||
|
};
|
||||||
|
|
||||||
|
/* On MAX518 and MAX518 variant, we have two outputs */
|
||||||
|
static struct attribute *max518_attributes[] = {
|
||||||
|
&iio_dev_attr_out1_raw.dev_attr.attr,
|
||||||
|
&iio_dev_attr_out1_scale.dev_attr.attr,
|
||||||
|
&iio_dev_attr_out2_raw.dev_attr.attr,
|
||||||
|
&iio_dev_attr_out2_scale.dev_attr.attr,
|
||||||
|
&iio_dev_attr_out1and2_raw.dev_attr.attr,
|
||||||
|
NULL
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct attribute_group max518_attribute_group = {
|
||||||
|
.attrs = max518_attributes,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int max517_suspend(struct i2c_client *client, pm_message_t mesg)
|
||||||
|
{
|
||||||
|
u8 outbuf = COMMAND_PD;
|
||||||
|
|
||||||
|
return i2c_master_send(client, &outbuf, 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int max517_resume(struct i2c_client *client)
|
||||||
|
{
|
||||||
|
u8 outbuf = 0;
|
||||||
|
|
||||||
|
return i2c_master_send(client, &outbuf, 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int max517_probe(struct i2c_client *client,
|
||||||
|
const struct i2c_device_id *id)
|
||||||
|
{
|
||||||
|
struct max517_data *data;
|
||||||
|
struct max517_platform_data *platform_data = client->dev.platform_data;
|
||||||
|
int err;
|
||||||
|
|
||||||
|
data = kzalloc(sizeof(struct max517_data), GFP_KERNEL);
|
||||||
|
if (!data) {
|
||||||
|
err = -ENOMEM;
|
||||||
|
goto exit;
|
||||||
|
}
|
||||||
|
|
||||||
|
i2c_set_clientdata(client, data);
|
||||||
|
|
||||||
|
data->indio_dev = iio_allocate_device();
|
||||||
|
if (data->indio_dev == NULL) {
|
||||||
|
err = -ENOMEM;
|
||||||
|
goto exit_free_data;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* establish that the iio_dev is a child of the i2c device */
|
||||||
|
data->indio_dev->dev.parent = &client->dev;
|
||||||
|
|
||||||
|
/* reduced attribute set for MAX517 */
|
||||||
|
if (id->driver_data == ID_MAX517)
|
||||||
|
data->indio_dev->attrs = &max517_attribute_group;
|
||||||
|
else
|
||||||
|
data->indio_dev->attrs = &max518_attribute_group;
|
||||||
|
data->indio_dev->dev_data = (void *)(data);
|
||||||
|
data->indio_dev->driver_module = THIS_MODULE;
|
||||||
|
data->indio_dev->modes = INDIO_DIRECT_MODE;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Reference voltage on MAX518 and default is 5V, else take vref_mv
|
||||||
|
* from platform_data
|
||||||
|
*/
|
||||||
|
if (id->driver_data == ID_MAX518 || !platform_data) {
|
||||||
|
data->vref_mv[0] = data->vref_mv[1] = 5000; /* mV */
|
||||||
|
} else {
|
||||||
|
data->vref_mv[0] = platform_data->vref_mv[0];
|
||||||
|
data->vref_mv[1] = platform_data->vref_mv[1];
|
||||||
|
}
|
||||||
|
|
||||||
|
err = iio_device_register(data->indio_dev);
|
||||||
|
if (err)
|
||||||
|
goto exit_free_device;
|
||||||
|
|
||||||
|
dev_info(&client->dev, "DAC registered\n");
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
exit_free_device:
|
||||||
|
iio_free_device(data->indio_dev);
|
||||||
|
exit_free_data:
|
||||||
|
kfree(data);
|
||||||
|
exit:
|
||||||
|
return err;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int max517_remove(struct i2c_client *client)
|
||||||
|
{
|
||||||
|
struct max517_data *data = i2c_get_clientdata(client);
|
||||||
|
|
||||||
|
iio_free_device(data->indio_dev);
|
||||||
|
kfree(data);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct i2c_device_id max517_id[] = {
|
||||||
|
{ "max517", ID_MAX517 },
|
||||||
|
{ "max518", ID_MAX518 },
|
||||||
|
{ "max519", ID_MAX519 },
|
||||||
|
{ }
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(i2c, max517_id);
|
||||||
|
|
||||||
|
static struct i2c_driver max517_driver = {
|
||||||
|
.driver = {
|
||||||
|
.name = MAX517_DRV_NAME,
|
||||||
|
},
|
||||||
|
.probe = max517_probe,
|
||||||
|
.remove = max517_remove,
|
||||||
|
.suspend = max517_suspend,
|
||||||
|
.resume = max517_resume,
|
||||||
|
.id_table = max517_id,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int __init max517_init(void)
|
||||||
|
{
|
||||||
|
return i2c_add_driver(&max517_driver);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void __exit max517_exit(void)
|
||||||
|
{
|
||||||
|
i2c_del_driver(&max517_driver);
|
||||||
|
}
|
||||||
|
|
||||||
|
MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
|
||||||
|
MODULE_DESCRIPTION("MAX517/MAX518/MAX519 8-bit DAC");
|
||||||
|
MODULE_LICENSE("GPL");
|
||||||
|
|
||||||
|
module_init(max517_init);
|
||||||
|
module_exit(max517_exit);
|
||||||
|
|
@ -0,0 +1,19 @@
|
||||||
|
/*
|
||||||
|
* MAX517 DAC driver
|
||||||
|
*
|
||||||
|
* Copyright 2011 Roland Stigge <stigge@antcom.de>
|
||||||
|
*
|
||||||
|
* Licensed under the GPL-2 or later.
|
||||||
|
*/
|
||||||
|
#ifndef IIO_DAC_MAX517_H_
|
||||||
|
#define IIO_DAC_MAX517_H_
|
||||||
|
|
||||||
|
/*
|
||||||
|
* TODO: struct max517_platform_data needs to go into include/linux/iio
|
||||||
|
*/
|
||||||
|
|
||||||
|
struct max517_platform_data {
|
||||||
|
u16 vref_mv[2];
|
||||||
|
};
|
||||||
|
|
||||||
|
#endif /* IIO_DAC_MAX517_H_ */
|
||||||
Loading…
Reference in New Issue