net: dsa: mv88e6xxx: Refactor mv88e6352 SERDES code into an op

The mv88e6390 family has a different SERDES implementation. Refactor
the mv88e6352 code into an ops function, so we can later add the
mv88e6390 code.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Andrew Lunn 2017-05-26 01:03:21 +02:00 committed by David S. Miller
parent 10fa5bfcd6
commit 6d91782f0f
5 changed files with 122 additions and 48 deletions

View File

@ -6,3 +6,4 @@ mv88e6xxx-objs += global1_vtu.o
mv88e6xxx-$(CONFIG_NET_DSA_MV88E6XXX_GLOBAL2) += global2.o
mv88e6xxx-objs += phy.o
mv88e6xxx-objs += port.o
mv88e6xxx-objs += serdes.o

View File

@ -38,6 +38,7 @@
#include "global2.h"
#include "phy.h"
#include "port.h"
#include "serdes.h"
static void assert_reg_lock(struct mv88e6xxx_chip *chip)
{
@ -234,18 +235,6 @@ struct mii_bus *mv88e6xxx_default_mdio_bus(struct mv88e6xxx_chip *chip)
return mdio_bus->bus;
}
static int mv88e6xxx_serdes_read(struct mv88e6xxx_chip *chip, int reg, u16 *val)
{
return mv88e6xxx_phy_page_read(chip, ADDR_SERDES, SERDES_PAGE_FIBER,
reg, val);
}
static int mv88e6xxx_serdes_write(struct mv88e6xxx_chip *chip, int reg, u16 val)
{
return mv88e6xxx_phy_page_write(chip, ADDR_SERDES, SERDES_PAGE_FIBER,
reg, val);
}
static void mv88e6xxx_g1_irq_mask(struct irq_data *d)
{
struct mv88e6xxx_chip *chip = irq_data_get_irq_chip_data(d);
@ -1733,24 +1722,6 @@ static int mv88e6xxx_switch_reset(struct mv88e6xxx_chip *chip)
return mv88e6xxx_software_reset(chip);
}
static int mv88e6xxx_serdes_power_on(struct mv88e6xxx_chip *chip)
{
u16 val;
int err;
/* Clear Power Down bit */
err = mv88e6xxx_serdes_read(chip, MII_BMCR, &val);
if (err)
return err;
if (val & BMCR_PDOWN) {
val &= ~BMCR_PDOWN;
err = mv88e6xxx_serdes_write(chip, MII_BMCR, val);
}
return err;
}
static int mv88e6xxx_set_port_mode(struct mv88e6xxx_chip *chip, int port,
enum mv88e6xxx_frame_mode frame, u16 egress,
u16 etype)
@ -1832,6 +1803,15 @@ static int mv88e6xxx_setup_egress_floods(struct mv88e6xxx_chip *chip, int port)
return 0;
}
static int mv88e6xxx_serdes_power(struct mv88e6xxx_chip *chip, int port,
bool on)
{
if (chip->info->ops->serdes_power)
return chip->info->ops->serdes_power(chip, port, on);
return 0;
}
static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
{
struct dsa_switch *ds = chip->ds;
@ -1882,22 +1862,12 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
if (err)
return err;
/* If this port is connected to a SerDes, make sure the SerDes is not
* powered down.
/* If this port is connected to a SerDes, make sure the SerDes is
* powered up.
*/
if (mv88e6xxx_has(chip, MV88E6XXX_FLAGS_SERDES)) {
err = mv88e6xxx_port_read(chip, port, PORT_STATUS, &reg);
if (err)
return err;
reg &= PORT_STATUS_CMODE_MASK;
if ((reg == PORT_STATUS_CMODE_100BASE_X) ||
(reg == PORT_STATUS_CMODE_1000BASE_X) ||
(reg == PORT_STATUS_CMODE_SGMII)) {
err = mv88e6xxx_serdes_power_on(chip);
if (err < 0)
return err;
}
}
err = mv88e6xxx_serdes_power(chip, port, true);
if (err)
return err;
/* Port Control 2: don't force a good FCS, set the maximum frame size to
* 10240 bytes, disable 802.1q tags checking, don't discard tagged or
@ -2662,6 +2632,7 @@ static const struct mv88e6xxx_ops mv88e6172_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6352_g1_vtu_getnext,
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
.serdes_power = mv88e6352_serdes_power,
};
static const struct mv88e6xxx_ops mv88e6175_ops = {
@ -2726,6 +2697,7 @@ static const struct mv88e6xxx_ops mv88e6176_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6352_g1_vtu_getnext,
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
.serdes_power = mv88e6352_serdes_power,
};
static const struct mv88e6xxx_ops mv88e6185_ops = {
@ -2882,6 +2854,7 @@ static const struct mv88e6xxx_ops mv88e6240_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6352_g1_vtu_getnext,
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
.serdes_power = mv88e6352_serdes_power,
};
static const struct mv88e6xxx_ops mv88e6290_ops = {
@ -3104,6 +3077,7 @@ static const struct mv88e6xxx_ops mv88e6352_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6352_g1_vtu_getnext,
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
.serdes_power = mv88e6352_serdes_power,
};
static const struct mv88e6xxx_ops mv88e6390_ops = {

View File

@ -37,9 +37,6 @@
#define PHY_PAGE 0x16
#define PHY_PAGE_COPPER 0x00
#define ADDR_SERDES 0x0f
#define SERDES_PAGE_FIBER 0x01
#define PORT_STATUS 0x00
#define PORT_STATUS_PAUSE_EN BIT(15)
#define PORT_STATUS_MY_PAUSE BIT(14)
@ -884,6 +881,9 @@ struct mv88e6xxx_ops {
/* Can be either in g1 or g2, so don't use a prefix */
int (*mgmt_rsvd2cpu)(struct mv88e6xxx_chip *chip);
/* Power on/off a SERDES interface */
int (*serdes_power)(struct mv88e6xxx_chip *chip, int port, bool on);
/* VLAN Translation Unit operations */
int (*vtu_getnext)(struct mv88e6xxx_chip *chip,
struct mv88e6xxx_vtu_entry *entry);

View File

@ -0,0 +1,75 @@
/*
* Marvell 88E6xxx SERDES manipulation, via SMI bus
*
* Copyright (c) 2008 Marvell Semiconductor
*
* Copyright (c) 2017 Andrew Lunn <andrew@lunn.ch>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/mii.h>
#include "mv88e6xxx.h"
#include "phy.h"
#include "port.h"
#include "serdes.h"
static int mv88e6352_serdes_read(struct mv88e6xxx_chip *chip, int reg,
u16 *val)
{
return mv88e6xxx_phy_page_read(chip, MV88E6352_ADDR_SERDES,
MV88E6352_SERDES_PAGE_FIBER,
reg, val);
}
static int mv88e6352_serdes_write(struct mv88e6xxx_chip *chip, int reg,
u16 val)
{
return mv88e6xxx_phy_page_write(chip, MV88E6352_ADDR_SERDES,
MV88E6352_SERDES_PAGE_FIBER,
reg, val);
}
static int mv88e6352_serdes_power_set(struct mv88e6xxx_chip *chip, bool on)
{
u16 val, new_val;
int err;
err = mv88e6352_serdes_read(chip, MII_BMCR, &val);
if (err)
return err;
if (on)
new_val = val & ~BMCR_PDOWN;
else
new_val = val | BMCR_PDOWN;
if (val != new_val)
err = mv88e6352_serdes_write(chip, MII_BMCR, new_val);
return err;
}
int mv88e6352_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
{
int err;
u8 cmode;
err = mv88e6xxx_port_get_cmode(chip, port, &cmode);
if (err)
return err;
if ((cmode == PORT_STATUS_CMODE_100BASE_X) ||
(cmode == PORT_STATUS_CMODE_1000BASE_X) ||
(cmode == PORT_STATUS_CMODE_SGMII)) {
err = mv88e6352_serdes_power_set(chip, on);
if (err < 0)
return err;
}
return 0;
}

View File

@ -0,0 +1,24 @@
/*
* Marvell 88E6xxx SERDES manipulation, via SMI bus
*
* Copyright (c) 2008 Marvell Semiconductor
*
* Copyright (c) 2016 Andrew Lunn <andrew@lunn.ch>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _MV88E6XXX_SERDES_H
#define _MV88E6XXX_SERDES_H
#include "mv88e6xxx.h"
#define MV88E6352_ADDR_SERDES 0x0f
#define MV88E6352_SERDES_PAGE_FIBER 0x01
int mv88e6352_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on);
#endif