diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index 32871918bb6e..214547b5c51f 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -39,19 +39,10 @@ #include "common.h" -/* - * The on-chip registers are given a size of 1MB so that a section can - * be used to map them; this saves a page table. This is the place to - * add mappings for ROM, expansion memory, PCMCIA, etc. (if static - * mappings are chosen for those areas). - * -*/ - static struct map_desc autcpu12_io_desc[] __initdata = { - /* memory-mapped extra io and CS8900A Ethernet chip */ - /* ethernet chip */ - { - .virtual = AUTCPU12_VIRT_CS8900A, + /* Memory-mapped extra io and CS8900A Ethernet chip */ + { + .virtual = IO_ADDRESS(AUTCPU12_PHYS_CS8900A), .pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A), .length = SZ_1M, .type = MT_DEVICE diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c index c314f49d6ef6..d90d25c67ac2 100644 --- a/arch/arm/mach-clps711x/cdb89712.c +++ b/arch/arm/mach-clps711x/cdb89712.c @@ -40,8 +40,8 @@ */ static struct map_desc cdb89712_io_desc[] __initdata = { { - .virtual = ETHER_BASE, - .pfn =__phys_to_pfn(ETHER_START), + .virtual = IO_ADDRESS(ETHER_PHYS_BASE), + .pfn = __phys_to_pfn(ETHER_PHYS_BASE), .length = ETHER_SIZE, .type = MT_DEVICE } diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 47fb496ceae7..286d6e6d5f5a 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -45,7 +45,7 @@ static struct map_desc clps711x_io_desc[] __initdata = { { .virtual = (unsigned long)CLPS711X_VIRT_BASE, .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), - .length = SZ_1M, + .length = SZ_64K, .type = MT_DEVICE } }; diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c index 4372f06c9929..054eaa05f5c8 100644 --- a/arch/arm/mach-clps711x/edb7211-mm.c +++ b/arch/arm/mach-clps711x/edb7211-mm.c @@ -51,23 +51,23 @@ extern void clps711x_map_io(void); * happens). */ static struct map_desc edb7211_io_desc[] __initdata = { - { /* memory-mapped extra keyboard row */ - .virtual = EP7211_VIRT_EXTKBD, + { /* Memory-mapped extra keyboard row */ + .virtual = IO_ADDRESS(EP7211_PHYS_EXTKBD), .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD), .length = SZ_1M, .type = MT_DEVICE, - }, { /* and CS8900A Ethernet chip */ - .virtual = EP7211_VIRT_CS8900A, + }, { /* CS8900A Ethernet chip */ + .virtual = IO_ADDRESS(EP7211_PHYS_CS8900A), .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A), .length = SZ_1M, .type = MT_DEVICE, - }, { /* flash banks */ - .virtual = EP7211_VIRT_FLASH1, + }, { /* Flash bank 0 */ + .virtual = IO_ADDRESS(EP7211_PHYS_FLASH1), .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1), .length = SZ_8M, .type = MT_DEVICE, - }, { - .virtual = EP7211_VIRT_FLASH2, + }, { /* Flash bank 1 */ + .virtual = IO_ADDRESS(EP7211_PHYS_FLASH2), .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2), .length = SZ_8M, .type = MT_DEVICE, diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h index 1588a365f610..f95ce6f29119 100644 --- a/arch/arm/mach-clps711x/include/mach/autcpu12.h +++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h @@ -20,12 +20,8 @@ #ifndef __ASM_ARCH_AUTCPU12_H #define __ASM_ARCH_AUTCPU12_H -/* - * The CS8900A ethernet chip has its I/O registers wired to chip select 2 - * (nCS2). This is the mapping for it. - */ -#define AUTCPU12_PHYS_CS8900A CS2_PHYS_BASE /* physical */ -#define AUTCPU12_VIRT_CS8900A (0xfe000000) /* virtual */ +/* The CS8900A ethernet chip has its I/O registers wired to chip select 2 */ +#define AUTCPU12_PHYS_CS8900A CS2_PHYS_BASE /* * The flash bank is wired to chip select 0 @@ -34,11 +30,9 @@ /* offset for device specific information structure */ #define AUTCPU12_LCDINFO_OFFS (0x00010000) -/* -* Videomemory is the internal SRAM (CS 6) -*/ + +/* Videomemory in the internal SRAM (CS 6) */ #define AUTCPU12_PHYS_VIDEO CS6_PHYS_BASE -#define AUTCPU12_VIRT_VIDEO (0xfd000000) /* * All special IO's are tied to CS1 diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 8497775d6ee5..0a3df25ffea7 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -24,7 +24,10 @@ #include -#define CLPS711X_VIRT_BASE IOMEM(0xff000000) +#define IO_ADDRESS(x) (0xdc000000 + (((x) & 0x03ffffff) | \ + (((x) >> 2) & 0x3c000000))) + +#define CLPS711X_VIRT_BASE IOMEM(IO_ADDRESS(CLPS711X_PHYS_BASE)) #ifndef __ASSEMBLY__ #define clps_readb(off) readb(CLPS711X_VIRT_BASE + (off)) @@ -61,58 +64,25 @@ #define CS7_PHYS_BASE (0x00000000) #endif -#define SYSPLD_VIRT_BASE 0xfe000000 -#define SYSPLD_BASE SYSPLD_VIRT_BASE - #if defined (CONFIG_ARCH_CDB89712) -#define ETHER_START 0x20000000 -#define ETHER_SIZE 0x1000 -#define ETHER_BASE 0xfe000000 +#define ETHER_PHYS_BASE CS2_PHYS_BASE +#define ETHER_SIZE 0x1000 #endif #if defined (CONFIG_ARCH_EDB7211) -/* - * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) - * and repeat across it. This is the mapping for it. - * - * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This - * was cause for much consternation and headscratching. This should probably - * be made a compile/run time kernel option. - */ -#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE /* physical */ +/* The extra 8 lines of the keyboard matrix are wired to chip select 3 */ +#define EP7211_PHYS_EXTKBD CS3_PHYS_BASE -#define EP7211_VIRT_EXTKBD (0xfd000000) /* virtual */ +/* The CS8900A ethernet chip has its I/O registers wired to chip select 2 */ +#define EP7211_PHYS_CS8900A CS2_PHYS_BASE - -/* - * The CS8900A ethernet chip has its I/O registers wired to chip select 2 - * (nCS2). This is the mapping for it. - * - * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This - * was cause for much consternation and headscratching. This should probably - * be made a compile/run time kernel option. - */ -#define EP7211_PHYS_CS8900A CS2_PHYS_BASE /* physical */ - -#define EP7211_VIRT_CS8900A (0xfc000000) /* virtual */ - - -/* - * The two flash banks are wired to chip selects 0 and 1. This is the mapping - * for them. - * - * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running - * in jumpered boot mode. - */ -#define EP7211_PHYS_FLASH1 CS0_PHYS_BASE /* physical */ -#define EP7211_PHYS_FLASH2 CS1_PHYS_BASE /* physical */ - -#define EP7211_VIRT_FLASH1 (0xfa000000) /* virtual */ -#define EP7211_VIRT_FLASH2 (0xfb000000) /* virtual */ +/* The two flash banks are wired to chip selects 0 and 1 */ +#define EP7211_PHYS_FLASH1 CS0_PHYS_BASE +#define EP7211_PHYS_FLASH2 CS1_PHYS_BASE #endif /* CONFIG_ARCH_EDB7211 */ diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h index f7f4c1201898..9a433155bf58 100644 --- a/arch/arm/mach-clps711x/include/mach/syspld.h +++ b/arch/arm/mach-clps711x/include/mach/syspld.h @@ -23,14 +23,9 @@ #define __ASM_ARCH_SYSPLD_H #define SYSPLD_PHYS_BASE (0x10000000) +#define SYSPLD_VIRT_BASE IO_ADDRESS(SYSPLD_PHYS_BASE) -#ifndef __ASSEMBLY__ -#include - -#define SYSPLD_REG(type,off) (*(volatile type *)(SYSPLD_BASE + off)) -#else -#define SYSPLD_REG(type,off) (off) -#endif +#define SYSPLD_REG(type, off) (*(volatile type *)(SYSPLD_VIRT_BASE + (off))) #define PLD_INT SYSPLD_REG(u32, 0x000000) #define PLD_INT_PENIRQ (1 << 5) diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 7680beab4ed2..dd8995027dd4 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -39,22 +39,16 @@ #include "common.h" /* - * Map the P720T system PLD. It occupies two address spaces: - * SYSPLD_PHYS_BASE and SYSPLD_PHYS_BASE + 0x00400000 - * We map both here. + * Map the P720T system PLD. It occupies two address spaces: + * 0x10000000 and 0x10400000. We map both regions as one. */ static struct map_desc p720t_io_desc[] __initdata = { { .virtual = SYSPLD_VIRT_BASE, .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE), - .length = SZ_1M, - .type = MT_DEVICE - }, { - .virtual = 0xfe400000, - .pfn = __phys_to_pfn(0x10400000), - .length = SZ_1M, - .type = MT_DEVICE - } + .length = SZ_8M, + .type = MT_DEVICE, + }, }; static void __init