Pull platform-drivers into test branch
This commit is contained in:
Len Brown
commit
6bfe5c9d6f
|
|
@ -398,26 +398,68 @@ Temperature sensors -- /proc/acpi/ibm/thermal
|
|||
|
||||
Most ThinkPads include six or more separate temperature sensors but
|
||||
only expose the CPU temperature through the standard ACPI methods.
|
||||
This feature shows readings from up to eight different sensors. Some
|
||||
readings may not be valid, e.g. may show large negative values. For
|
||||
example, on the X40, a typical output may be:
|
||||
|
||||
temperatures: 42 42 45 41 36 -128 33 -128
|
||||
|
||||
Thomas Gruber took his R51 apart and traced all six active sensors in
|
||||
his laptop (the location of sensors may vary on other models):
|
||||
|
||||
1: CPU
|
||||
2: Mini PCI Module
|
||||
3: HDD
|
||||
4: GPU
|
||||
5: Battery
|
||||
6: N/A
|
||||
7: Battery
|
||||
8: N/A
|
||||
This feature shows readings from up to eight different sensors on older
|
||||
ThinkPads, and it has experimental support for up to sixteen different
|
||||
sensors on newer ThinkPads. Readings from sensors that are not available
|
||||
return -128.
|
||||
|
||||
No commands can be written to this file.
|
||||
|
||||
EXPERIMENTAL: The 16-sensors feature is marked EXPERIMENTAL because the
|
||||
implementation directly accesses hardware registers and may not work as
|
||||
expected. USE WITH CAUTION! To use this feature, you need to supply the
|
||||
experimental=1 parameter when loading the module. When EXPERIMENTAL
|
||||
mode is enabled, reading the first 8 sensors on newer ThinkPads will
|
||||
also use an new experimental thermal sensor access mode.
|
||||
|
||||
For example, on the X40, a typical output may be:
|
||||
temperatures: 42 42 45 41 36 -128 33 -128
|
||||
|
||||
EXPERIMENTAL: On the T43/p, a typical output may be:
|
||||
temperatures: 48 48 36 52 38 -128 31 -128 48 52 48 -128 -128 -128 -128 -128
|
||||
|
||||
The mapping of thermal sensors to physical locations varies depending on
|
||||
system-board model (and thus, on ThinkPad model).
|
||||
|
||||
http://thinkwiki.org/wiki/Thermal_Sensors is a public wiki page that
|
||||
tries to track down these locations for various models.
|
||||
|
||||
Most (newer?) models seem to follow this pattern:
|
||||
|
||||
1: CPU
|
||||
2: (depends on model)
|
||||
3: (depends on model)
|
||||
4: GPU
|
||||
5: Main battery: main sensor
|
||||
6: Bay battery: main sensor
|
||||
7: Main battery: secondary sensor
|
||||
8: Bay battery: secondary sensor
|
||||
9-15: (depends on model)
|
||||
|
||||
For the R51 (source: Thomas Gruber):
|
||||
2: Mini-PCI
|
||||
3: Internal HDD
|
||||
|
||||
For the T43, T43/p (source: Shmidoax/Thinkwiki.org)
|
||||
http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_T43.2C_T43p
|
||||
2: System board, left side (near PCMCIA slot), reported as HDAPS temp
|
||||
3: PCMCIA slot
|
||||
9: MCH (northbridge) to DRAM Bus
|
||||
10: ICH (southbridge), under Mini-PCI card, under touchpad
|
||||
11: Power regulator, underside of system board, below F2 key
|
||||
|
||||
The A31 has a very atypical layout for the thermal sensors
|
||||
(source: Milos Popovic, http://thinkwiki.org/wiki/Thermal_Sensors#ThinkPad_A31)
|
||||
1: CPU
|
||||
2: Main Battery: main sensor
|
||||
3: Power Converter
|
||||
4: Bay Battery: main sensor
|
||||
5: MCH (northbridge)
|
||||
6: PCMCIA/ambient
|
||||
7: Main Battery: secondary sensor
|
||||
8: Bay Battery: secondary sensor
|
||||
|
||||
|
||||
EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
|
||||
------------------------------------------------------------------------
|
||||
|
||||
|
|
@ -529,27 +571,57 @@ directly accesses hardware registers and may not work as expected. USE
|
|||
WITH CAUTION! To use this feature, you need to supply the
|
||||
experimental=1 parameter when loading the module.
|
||||
|
||||
This feature attempts to show the current fan speed. The speed is read
|
||||
directly from the hardware registers of the embedded controller. This
|
||||
is known to work on later R, T and X series ThinkPads but may show a
|
||||
bogus value on other models.
|
||||
This feature attempts to show the current fan speed, control mode and
|
||||
other fan data that might be available. The speed is read directly
|
||||
from the hardware registers of the embedded controller. This is known
|
||||
to work on later R, T and X series ThinkPads but may show a bogus
|
||||
value on other models.
|
||||
|
||||
Most ThinkPad fans work in "levels". Level 0 stops the fan. The higher
|
||||
the level, the higher the fan speed, although adjacent levels often map
|
||||
to the same fan speed. 7 is the highest level, where the fan reaches
|
||||
the maximum recommended speed. Level "auto" means the EC changes the
|
||||
fan level according to some internal algorithm, usually based on
|
||||
readings from the thermal sensors. Level "disengaged" means the EC
|
||||
disables the speed-locked closed-loop fan control, and drives the fan as
|
||||
fast as it can go, which might exceed hardware limits, so use this level
|
||||
with caution.
|
||||
|
||||
The fan usually ramps up or down slowly from one speed to another,
|
||||
and it is normal for the EC to take several seconds to react to fan
|
||||
commands.
|
||||
|
||||
The fan may be enabled or disabled with the following commands:
|
||||
|
||||
echo enable >/proc/acpi/ibm/fan
|
||||
echo disable >/proc/acpi/ibm/fan
|
||||
|
||||
WARNING WARNING WARNING: do not leave the fan disabled unless you are
|
||||
monitoring the temperature sensor readings and you are ready to enable
|
||||
it if necessary to avoid overheating.
|
||||
Placing a fan on level 0 is the same as disabling it. Enabling a fan
|
||||
will try to place it in a safe level if it is too slow or disabled.
|
||||
|
||||
The fan only runs if it's enabled *and* the various temperature
|
||||
sensors which control it read high enough. On the X40, this seems to
|
||||
depend on the CPU and HDD temperatures. Specifically, the fan is
|
||||
turned on when either the CPU temperature climbs to 56 degrees or the
|
||||
HDD temperature climbs to 46 degrees. The fan is turned off when the
|
||||
CPU temperature drops to 49 degrees and the HDD temperature drops to
|
||||
41 degrees. These thresholds cannot currently be controlled.
|
||||
WARNING WARNING WARNING: do not leave the fan disabled unless you are
|
||||
monitoring all of the temperature sensor readings and you are ready to
|
||||
enable it if necessary to avoid overheating.
|
||||
|
||||
An enabled fan in level "auto" may stop spinning if the EC decides the
|
||||
ThinkPad is cool enough and doesn't need the extra airflow. This is
|
||||
normal, and the EC will spin the fan up if the varios thermal readings
|
||||
rise too much.
|
||||
|
||||
On the X40, this seems to depend on the CPU and HDD temperatures.
|
||||
Specifically, the fan is turned on when either the CPU temperature
|
||||
climbs to 56 degrees or the HDD temperature climbs to 46 degrees. The
|
||||
fan is turned off when the CPU temperature drops to 49 degrees and the
|
||||
HDD temperature drops to 41 degrees. These thresholds cannot
|
||||
currently be controlled.
|
||||
|
||||
The fan level can be controlled with the command:
|
||||
|
||||
echo 'level <level>' > /proc/acpi/ibm/thermal
|
||||
|
||||
Where <level> is an integer from 0 to 7, or one of the words "auto"
|
||||
or "disengaged" (without the quotes). Not all ThinkPads support the
|
||||
"auto" and "disengaged" levels.
|
||||
|
||||
On the X31 and X40 (and ONLY on those models), the fan speed can be
|
||||
controlled to a certain degree. Once the fan is running, it can be
|
||||
|
|
@ -562,12 +634,9 @@ about 3700 to about 7350. Values outside this range either do not have
|
|||
any effect or the fan speed eventually settles somewhere in that
|
||||
range. The fan cannot be stopped or started with this command.
|
||||
|
||||
On the 570, temperature readings are not available through this
|
||||
feature and the fan control works a little differently. The fan speed
|
||||
is reported in levels from 0 (off) to 7 (max) and can be controlled
|
||||
with the following command:
|
||||
|
||||
echo 'level <level>' > /proc/acpi/ibm/thermal
|
||||
The ThinkPad's ACPI DSDT code will reprogram the fan on its own when
|
||||
certain conditions are met. It will override any fan programming done
|
||||
through ibm-acpi.
|
||||
|
||||
EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan
|
||||
---------------------------------------
|
||||
|
|
@ -601,6 +670,26 @@ example:
|
|||
|
||||
modprobe ibm_acpi hotkey=enable,0xffff video=auto_disable
|
||||
|
||||
The ibm-acpi kernel driver can be programmed to revert the fan level
|
||||
to a safe setting if userspace does not issue one of the fan commands:
|
||||
"enable", "disable", "level" or "watchdog" within a configurable
|
||||
ammount of time. To do this, use the "watchdog" command.
|
||||
|
||||
echo 'watchdog <interval>' > /proc/acpi/ibm/fan
|
||||
|
||||
Interval is the ammount of time in seconds to wait for one of the
|
||||
above mentioned fan commands before reseting the fan level to a safe
|
||||
one. If set to zero, the watchdog is disabled (default). When the
|
||||
watchdog timer runs out, it does the exact equivalent of the "enable"
|
||||
fan command.
|
||||
|
||||
Note that the watchdog timer stops after it enables the fan. It will
|
||||
be rearmed again automatically (using the same interval) when one of
|
||||
the above mentioned fan commands is received. The fan watchdog is,
|
||||
therefore, not suitable to protect against fan mode changes made
|
||||
through means other than the "enable", "disable", and "level" fan
|
||||
commands.
|
||||
|
||||
|
||||
Example Configuration
|
||||
---------------------
|
||||
|
|
|
|||
|
|
@ -173,6 +173,7 @@ config ACPI_NUMA
|
|||
config ACPI_ASUS
|
||||
tristate "ASUS/Medion Laptop Extras"
|
||||
depends on X86
|
||||
select BACKLIGHT_CLASS_DEVICE
|
||||
---help---
|
||||
This driver provides support for extra features of ACPI-compatible
|
||||
ASUS laptops. As some of Medion laptops are made by ASUS, it may also
|
||||
|
|
@ -201,6 +202,7 @@ config ACPI_ASUS
|
|||
config ACPI_IBM
|
||||
tristate "IBM ThinkPad Laptop Extras"
|
||||
depends on X86
|
||||
select BACKLIGHT_CLASS_DEVICE
|
||||
---help---
|
||||
This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
|
||||
support for Fn-Fx key combinations, Bluetooth control, video
|
||||
|
|
@ -223,9 +225,21 @@ config ACPI_IBM_DOCK
|
|||
|
||||
If you are not sure, say N here.
|
||||
|
||||
config ACPI_IBM_BAY
|
||||
bool "Legacy Removable Bay Support"
|
||||
depends on ACPI_IBM
|
||||
depends on ACPI_BAY=n
|
||||
default n
|
||||
---help---
|
||||
Allows the ibm_acpi driver to handle removable bays.
|
||||
This support is obsoleted by CONFIG_ACPI_BAY.
|
||||
|
||||
If you are not sure, say N here.
|
||||
|
||||
config ACPI_TOSHIBA
|
||||
tristate "Toshiba Laptop Extras"
|
||||
depends on X86
|
||||
select BACKLIGHT_CLASS_DEVICE
|
||||
---help---
|
||||
This driver adds support for access to certain system settings
|
||||
on "legacy free" Toshiba laptops. These laptops can be recognized by
|
||||
|
|
|
|||
|
|
@ -35,6 +35,7 @@
|
|||
#include <linux/init.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/proc_fs.h>
|
||||
#include <linux/backlight.h>
|
||||
#include <acpi/acpi_drivers.h>
|
||||
#include <acpi/acpi_bus.h>
|
||||
#include <asm/uaccess.h>
|
||||
|
|
@ -402,6 +403,8 @@ static struct model_data model_conf[END_MODEL] = {
|
|||
/* procdir we use */
|
||||
static struct proc_dir_entry *asus_proc_dir;
|
||||
|
||||
static struct backlight_device *asus_backlight_device;
|
||||
|
||||
/*
|
||||
* This header is made available to allow proper configuration given model,
|
||||
* revision number , ... this info cannot go in struct asus_hotk because it is
|
||||
|
|
@ -779,7 +782,7 @@ proc_write_lcd(struct file *file, const char __user * buffer,
|
|||
return rv;
|
||||
}
|
||||
|
||||
static int read_brightness(void)
|
||||
static int read_brightness(struct backlight_device *bd)
|
||||
{
|
||||
int value;
|
||||
|
||||
|
|
@ -801,9 +804,10 @@ static int read_brightness(void)
|
|||
/*
|
||||
* Change the brightness level
|
||||
*/
|
||||
static void set_brightness(int value)
|
||||
static int set_brightness(int value)
|
||||
{
|
||||
acpi_status status = 0;
|
||||
int ret = 0;
|
||||
|
||||
/* SPLV laptop */
|
||||
if (hotk->methods->brightness_set) {
|
||||
|
|
@ -811,11 +815,12 @@ static void set_brightness(int value)
|
|||
value, NULL))
|
||||
printk(KERN_WARNING
|
||||
"Asus ACPI: Error changing brightness\n");
|
||||
return;
|
||||
ret = -EIO;
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* No SPLV method if we are here, act as appropriate */
|
||||
value -= read_brightness();
|
||||
value -= read_brightness(NULL);
|
||||
while (value != 0) {
|
||||
status = acpi_evaluate_object(NULL, (value > 0) ?
|
||||
hotk->methods->brightness_up :
|
||||
|
|
@ -825,15 +830,22 @@ static void set_brightness(int value)
|
|||
if (ACPI_FAILURE(status))
|
||||
printk(KERN_WARNING
|
||||
"Asus ACPI: Error changing brightness\n");
|
||||
ret = -EIO;
|
||||
}
|
||||
return;
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int set_brightness_status(struct backlight_device *bd)
|
||||
{
|
||||
return set_brightness(bd->props->brightness);
|
||||
}
|
||||
|
||||
static int
|
||||
proc_read_brn(char *page, char **start, off_t off, int count, int *eof,
|
||||
void *data)
|
||||
{
|
||||
return sprintf(page, "%d\n", read_brightness());
|
||||
return sprintf(page, "%d\n", read_brightness(NULL));
|
||||
}
|
||||
|
||||
static int
|
||||
|
|
@ -1333,6 +1345,26 @@ static int asus_hotk_remove(struct acpi_device *device, int type)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static struct backlight_properties asus_backlight_data = {
|
||||
.owner = THIS_MODULE,
|
||||
.get_brightness = read_brightness,
|
||||
.update_status = set_brightness_status,
|
||||
.max_brightness = 15,
|
||||
};
|
||||
|
||||
static void __exit asus_acpi_exit(void)
|
||||
{
|
||||
if (asus_backlight_device)
|
||||
backlight_device_unregister(asus_backlight_device);
|
||||
|
||||
acpi_bus_unregister_driver(&asus_hotk_driver);
|
||||
remove_proc_entry(PROC_ASUS, acpi_root_dir);
|
||||
|
||||
kfree(asus_info);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
static int __init asus_acpi_init(void)
|
||||
{
|
||||
int result;
|
||||
|
|
@ -1370,18 +1402,16 @@ static int __init asus_acpi_init(void)
|
|||
return result;
|
||||
}
|
||||
|
||||
asus_backlight_device = backlight_device_register("asus", NULL,
|
||||
&asus_backlight_data);
|
||||
if (IS_ERR(asus_backlight_device)) {
|
||||
printk(KERN_ERR "Could not register asus backlight device\n");
|
||||
asus_backlight_device = NULL;
|
||||
asus_acpi_exit();
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void __exit asus_acpi_exit(void)
|
||||
{
|
||||
acpi_bus_unregister_driver(&asus_hotk_driver);
|
||||
remove_proc_entry(PROC_ASUS, acpi_root_dir);
|
||||
|
||||
kfree(asus_info);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
module_init(asus_acpi_init);
|
||||
module_exit(asus_acpi_exit);
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -41,6 +41,8 @@
|
|||
#include <linux/init.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/proc_fs.h>
|
||||
#include <linux/backlight.h>
|
||||
|
||||
#include <asm/uaccess.h>
|
||||
|
||||
#include <acpi/acpi_drivers.h>
|
||||
|
|
@ -210,6 +212,7 @@ static acpi_status hci_read1(u32 reg, u32 * out1, u32 * result)
|
|||
}
|
||||
|
||||
static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ;
|
||||
static struct backlight_device *toshiba_backlight_device;
|
||||
static int force_fan;
|
||||
static int last_key_event;
|
||||
static int key_event_valid;
|
||||
|
|
@ -271,14 +274,23 @@ dispatch_write(struct file *file, const char __user * buffer,
|
|||
return result;
|
||||
}
|
||||
|
||||
static char *read_lcd(char *p)
|
||||
static int get_lcd(struct backlight_device *bd)
|
||||
{
|
||||
u32 hci_result;
|
||||
u32 value;
|
||||
|
||||
hci_read1(HCI_LCD_BRIGHTNESS, &value, &hci_result);
|
||||
if (hci_result == HCI_SUCCESS) {
|
||||
value = value >> HCI_LCD_BRIGHTNESS_SHIFT;
|
||||
return (value >> HCI_LCD_BRIGHTNESS_SHIFT);
|
||||
} else
|
||||
return -EFAULT;
|
||||
}
|
||||
|
||||
static char *read_lcd(char *p)
|
||||
{
|
||||
int value = get_lcd(NULL);
|
||||
|
||||
if (value >= 0) {
|
||||
p += sprintf(p, "brightness: %d\n", value);
|
||||
p += sprintf(p, "brightness_levels: %d\n",
|
||||
HCI_LCD_BRIGHTNESS_LEVELS);
|
||||
|
|
@ -289,22 +301,34 @@ static char *read_lcd(char *p)
|
|||
return p;
|
||||
}
|
||||
|
||||
static unsigned long write_lcd(const char *buffer, unsigned long count)
|
||||
static int set_lcd(int value)
|
||||
{
|
||||
int value;
|
||||
u32 hci_result;
|
||||
|
||||
if (sscanf(buffer, " brightness : %i", &value) == 1 &&
|
||||
value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS) {
|
||||
value = value << HCI_LCD_BRIGHTNESS_SHIFT;
|
||||
hci_write1(HCI_LCD_BRIGHTNESS, value, &hci_result);
|
||||
if (hci_result != HCI_SUCCESS)
|
||||
return -EFAULT;
|
||||
} else {
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return count;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int set_lcd_status(struct backlight_device *bd)
|
||||
{
|
||||
return set_lcd(bd->props->brightness);
|
||||
}
|
||||
|
||||
static unsigned long write_lcd(const char *buffer, unsigned long count)
|
||||
{
|
||||
int value;
|
||||
int ret = count;
|
||||
|
||||
if (sscanf(buffer, " brightness : %i", &value) == 1 &&
|
||||
value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS)
|
||||
ret = set_lcd(value);
|
||||
else
|
||||
ret = -EINVAL;
|
||||
return ret;
|
||||
}
|
||||
|
||||
static char *read_video(char *p)
|
||||
|
|
@ -506,6 +530,26 @@ static acpi_status __exit remove_device(void)
|
|||
return AE_OK;
|
||||
}
|
||||
|
||||
static struct backlight_properties toshiba_backlight_data = {
|
||||
.owner = THIS_MODULE,
|
||||
.get_brightness = get_lcd,
|
||||
.update_status = set_lcd_status,
|
||||
.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1,
|
||||
};
|
||||
|
||||
static void __exit toshiba_acpi_exit(void)
|
||||
{
|
||||
if (toshiba_backlight_device)
|
||||
backlight_device_unregister(toshiba_backlight_device);
|
||||
|
||||
remove_device();
|
||||
|
||||
if (toshiba_proc_dir)
|
||||
remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
static int __init toshiba_acpi_init(void)
|
||||
{
|
||||
acpi_status status = AE_OK;
|
||||
|
|
@ -546,18 +590,16 @@ static int __init toshiba_acpi_init(void)
|
|||
remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
|
||||
}
|
||||
|
||||
toshiba_backlight_device = backlight_device_register("toshiba", NULL,
|
||||
&toshiba_backlight_data);
|
||||
if (IS_ERR(toshiba_backlight_device)) {
|
||||
printk(KERN_ERR "Could not register toshiba backlight device\n");
|
||||
toshiba_backlight_device = NULL;
|
||||
toshiba_acpi_exit();
|
||||
}
|
||||
|
||||
return (ACPI_SUCCESS(status)) ? 0 : -ENODEV;
|
||||
}
|
||||
|
||||
static void __exit toshiba_acpi_exit(void)
|
||||
{
|
||||
remove_device();
|
||||
|
||||
if (toshiba_proc_dir)
|
||||
remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
|
||||
|
||||
return;
|
||||
}
|
||||
|
||||
module_init(toshiba_acpi_init);
|
||||
module_exit(toshiba_acpi_exit);
|
||||
|
|
|
|||
Loading…
Reference in New Issue