Staging: comedi: dt2814: Block comment issue fixed

This fixes up a WARNING: 'Block comments use a trailing */ on a
separate line' found by the checkpatch.pl tool.

Signed-off-by: Ravishankar Karkala Mallikarjunayya <ravishankarkm32@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ravishankar Karkala Mallikarjunayya 2016-06-17 16:56:17 +05:30 committed by Greg Kroah-Hartman
parent c9b0f2b63f
commit 6adb21c275
1 changed files with 37 additions and 35 deletions

View File

@ -1,38 +1,38 @@
/* /*
comedi/drivers/dt2814.c * comedi/drivers/dt2814.c
Hardware driver for Data Translation DT2814 * Hardware driver for Data Translation DT2814
*
COMEDI - Linux Control and Measurement Device Interface * COMEDI - Linux Control and Measurement Device Interface
Copyright (C) 1998 David A. Schleef <ds@schleef.org> * Copyright (C) 1998 David A. Schleef <ds@schleef.org>
*
This program is free software; you can redistribute it and/or modify * This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by * it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or * the Free Software Foundation; either version 2 of the License, or
(at your option) any later version. * (at your option) any later version.
*
This program is distributed in the hope that it will be useful, * This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of * but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details. * GNU General Public License for more details.
*/ */
/* /*
Driver: dt2814 * Driver: dt2814
Description: Data Translation DT2814 * Description: Data Translation DT2814
Author: ds * Author: ds
Status: complete * Status: complete
Devices: [Data Translation] DT2814 (dt2814) * Devices: [Data Translation] DT2814 (dt2814)
*
Configuration options: * Configuration options:
[0] - I/O port base address * [0] - I/O port base address
[1] - IRQ * [1] - IRQ
*
This card has 16 analog inputs multiplexed onto a 12 bit ADC. There * This card has 16 analog inputs multiplexed onto a 12 bit ADC. There
is a minimally useful onboard clock. The base frequency for the * is a minimally useful onboard clock. The base frequency for the
clock is selected by jumpers, and the clock divider can be selected * clock is selected by jumpers, and the clock divider can be selected
via programmed I/O. Unfortunately, the clock divider can only be * via programmed I/O. Unfortunately, the clock divider can only be
a power of 10, from 1 to 10^7, of which only 3 or 4 are useful. In * a power of 10, from 1 to 10^7, of which only 3 or 4 are useful. In
addition, the clock does not seem to be very accurate. * addition, the clock does not seem to be very accurate.
*/ */
#include <linux/module.h> #include <linux/module.h>
#include <linux/interrupt.h> #include <linux/interrupt.h>
@ -215,8 +215,10 @@ static irqreturn_t dt2814_interrupt(int irq, void *d)
int i; int i;
outb(0, dev->iobase + DT2814_CSR); outb(0, dev->iobase + DT2814_CSR);
/* note: turning off timed mode triggers another /*
sample. */ * note: turning off timed mode triggers another
* sample.
*/
for (i = 0; i < DT2814_TIMEOUT; i++) { for (i = 0; i < DT2814_TIMEOUT; i++) {
if (inb(dev->iobase + DT2814_CSR) & DT2814_FINISH) if (inb(dev->iobase + DT2814_CSR) & DT2814_FINISH)