From 69ccb372dc761b717bdbec7e2f53c852a38c83fd Mon Sep 17 00:00:00 2001 From: Yufeng Mo Date: Fri, 20 Aug 2021 15:35:17 +0800 Subject: [PATCH] ethtool: add two coalesce attributes for CQE mode Currently, there are many drivers who support CQE mode configuration, some configure it as a fixed when initialized, some provide an interface to change it by ethtool private flags. In order to make it more generic, add two new 'ETHTOOL_A_COALESCE_USE_CQE_TX' and 'ETHTOOL_A_COALESCE_USE_CQE_RX' coalesce attributes, then these parameters can be accessed by ethtool netlink coalesce uAPI. Also add an new structure kernel_ethtool_coalesce, then the new parameter can be added into this struct. Signed-off-by: Yufeng Mo Signed-off-by: Huazhong Tan Signed-off-by: Jakub Kicinski Signed-off-by: hongrongxuan Conflicts: net/ethtool/coalesce.c net/ethtool/netlink.h include/linux/ethtool.h --- Documentation/networking/ethtool-netlink.rst | 15 +++++++++++++++ include/linux/ethtool.h | 11 ++++++++++- include/uapi/linux/ethtool_netlink.h | 2 ++ net/ethtool/coalesce.c | 19 +++++++++++++++++-- 4 files changed, 44 insertions(+), 3 deletions(-) diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index 8eb950dbe4be..34c6e86245a8 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -922,12 +922,25 @@ Kernel response contents: ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval + ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx + ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx =========================================== ====== ======================= Attributes are only included in reply if their value is not zero or the corresponding bit in ``ethtool_ops::supported_coalesce_params`` is set (i.e. they are declared as supported by driver). +Timer reset mode (``ETHTOOL_A_COALESCE_USE_CQE_TX`` and +``ETHTOOL_A_COALESCE_USE_CQE_RX``) controls the interaction between packet +arrival and the various time based delay parameters. By default timers are +expected to limit the max delay between any packet arrival/departure and a +corresponding interrupt. In this mode timer should be started by packet +arrival (sometimes delivery of previous interrupt) and reset when interrupt +is delivered. +Setting the appropriate attribute to 1 will enable ``CQE`` mode, where +each packet event resets the timer. In this mode timer is used to force +the interrupt if queue goes idle, while busy queues depend on the packet +limit to trigger interrupts. COALESCE_SET ============ @@ -960,6 +973,8 @@ Request contents: ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval + ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx + ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx =========================================== ====== ======================= Request is rejected if it attributes declared as unsupported by driver (i.e. diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 5ad07ddeba0d..b9e524ed948f 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -177,6 +177,11 @@ extern int __ethtool_get_link_ksettings(struct net_device *dev, struct ethtool_link_ksettings *link_ksettings); +struct kernel_ethtool_coalesce { + u8 use_cqe_mode_tx; + u8 use_cqe_mode_rx; +}; + /** * ethtool_intersect_link_masks - Given two link masks, AND them together * @dst: first mask and where result is stored @@ -216,7 +221,9 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32, #define ETHTOOL_COALESCE_TX_USECS_HIGH BIT(19) #define ETHTOOL_COALESCE_TX_MAX_FRAMES_HIGH BIT(20) #define ETHTOOL_COALESCE_RATE_SAMPLE_INTERVAL BIT(21) -#define ETHTOOL_COALESCE_ALL_PARAMS GENMASK(21, 0) +#define ETHTOOL_COALESCE_USE_CQE_RX BIT(22) +#define ETHTOOL_COALESCE_USE_CQE_TX BIT(23) +#define ETHTOOL_COALESCE_ALL_PARAMS GENMASK(23, 0) #define ETHTOOL_COALESCE_USECS \ (ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS) @@ -229,6 +236,8 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32, ETHTOOL_COALESCE_TX_MAX_FRAMES_IRQ) #define ETHTOOL_COALESCE_USE_ADAPTIVE \ (ETHTOOL_COALESCE_USE_ADAPTIVE_RX | ETHTOOL_COALESCE_USE_ADAPTIVE_TX) +#define ETHTOOL_COALESCE_USE_CQE \ + (ETHTOOL_COALESCE_USE_CQE_RX | ETHTOOL_COALESCE_USE_CQE_TX) #define ETHTOOL_STAT_NOT_SET (~0ULL) diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index 70767c9ac31d..4541158804a2 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -360,6 +360,8 @@ enum { ETHTOOL_A_COALESCE_TX_USECS_HIGH, /* u32 */ ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH, /* u32 */ ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL, /* u32 */ + ETHTOOL_A_COALESCE_USE_CQE_MODE_TX, /* u8 */ + ETHTOOL_A_COALESCE_USE_CQE_MODE_RX, /* u8 */ /* add new constants above here */ __ETHTOOL_A_COALESCE_CNT, diff --git a/net/ethtool/coalesce.c b/net/ethtool/coalesce.c index 6afd99042d67..32f0313ae1e6 100644 --- a/net/ethtool/coalesce.c +++ b/net/ethtool/coalesce.c @@ -10,6 +10,7 @@ struct coalesce_req_info { struct coalesce_reply_data { struct ethnl_reply_data base; struct ethtool_coalesce coalesce; + struct kernel_ethtool_coalesce kernel_coalesce; u32 supported_params; }; @@ -123,7 +124,9 @@ static int coalesce_reply_size(const struct ethnl_req_info *req_base, nla_total_size(sizeof(u32)) + /* _RX_MAX_FRAMES_HIGH */ nla_total_size(sizeof(u32)) + /* _TX_USECS_HIGH */ nla_total_size(sizeof(u32)) + /* _TX_MAX_FRAMES_HIGH */ - nla_total_size(sizeof(u32)); /* _RATE_SAMPLE_INTERVAL */ + nla_total_size(sizeof(u32)) + /* _RATE_SAMPLE_INTERVAL */ + nla_total_size(sizeof(u8)) + /* _USE_CQE_MODE_TX */ + nla_total_size(sizeof(u8)); /* _USE_CQE_MODE_RX */ } static bool coalesce_put_u32(struct sk_buff *skb, u16 attr_type, u32 val, @@ -147,6 +150,7 @@ static int coalesce_fill_reply(struct sk_buff *skb, const struct ethnl_reply_data *reply_base) { const struct coalesce_reply_data *data = COALESCE_REPDATA(reply_base); + const struct kernel_ethtool_coalesce *kcoal = &data->kernel_coalesce; const struct ethtool_coalesce *coal = &data->coalesce; u32 supported = data->supported_params; @@ -193,7 +197,11 @@ static int coalesce_fill_reply(struct sk_buff *skb, coalesce_put_u32(skb, ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH, coal->tx_max_coalesced_frames_high, supported) || coalesce_put_u32(skb, ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL, - coal->rate_sample_interval, supported)) + coal->rate_sample_interval, supported) || + coalesce_put_bool(skb, ETHTOOL_A_COALESCE_USE_CQE_MODE_TX, + kcoal->use_cqe_mode_tx, supported) || + coalesce_put_bool(skb, ETHTOOL_A_COALESCE_USE_CQE_MODE_RX, + kcoal->use_cqe_mode_rx, supported)) return -EMSGSIZE; return 0; @@ -241,11 +249,14 @@ coalesce_set_policy[ETHTOOL_A_COALESCE_MAX + 1] = { [ETHTOOL_A_COALESCE_TX_USECS_HIGH] = { .type = NLA_U32 }, [ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH] = { .type = NLA_U32 }, [ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL] = { .type = NLA_U32 }, + [ETHTOOL_A_COALESCE_USE_CQE_MODE_TX] = NLA_POLICY_MAX(NLA_U8, 1), + [ETHTOOL_A_COALESCE_USE_CQE_MODE_RX] = NLA_POLICY_MAX(NLA_U8, 1), }; int ethnl_set_coalesce(struct sk_buff *skb, struct genl_info *info) { struct nlattr *tb[ETHTOOL_A_COALESCE_MAX + 1]; + struct kernel_ethtool_coalesce kernel_coalesce = {}; struct ethtool_coalesce coalesce = {}; struct ethnl_req_info req_info = {}; const struct ethtool_ops *ops; @@ -334,6 +345,10 @@ int ethnl_set_coalesce(struct sk_buff *skb, struct genl_info *info) tb[ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH], &mod); ethnl_update_u32(&coalesce.rate_sample_interval, tb[ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL], &mod); + ethnl_update_u8(&kernel_coalesce.use_cqe_mode_tx, + tb[ETHTOOL_A_COALESCE_USE_CQE_MODE_TX], &mod); + ethnl_update_u8(&kernel_coalesce.use_cqe_mode_rx, + tb[ETHTOOL_A_COALESCE_USE_CQE_MODE_RX], &mod); ret = 0; if (!mod) goto out_ops;