Char/Misc and other driver subsystem changes for 6.3-rc1

Here is the large set of driver changes for char/misc drivers and other smaller driver subsystems that flow through this git tree. Included in here are: - New IIO drivers and features and improvments in that subsystem - New hwtracing drivers and additions to that subsystem - lots of interconnect changes and new drivers as that subsystem seems under very active development recently. This required also merging in the icc subsystem changes through this tree. - FPGA driver updates - counter subsystem and driver updates - MHI driver updates - nvmem driver updates - documentation updates - Other smaller driver updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY/inQw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+yksvwCeOvU//SPwrbIpaeHAmHUv0PSVOrwAoKmt4ICh hQUudlztfkvUJxKIH0gh =Sjk4 -----END PGP SIGNATURE----- Merge tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the large set of driver changes for char/misc drivers and other smaller driver subsystems that flow through this git tree. Included in here are: - New IIO drivers and features and improvments in that subsystem - New hwtracing drivers and additions to that subsystem - lots of interconnect changes and new drivers as that subsystem seems under very active development recently. This required also merging in the icc subsystem changes through this tree. - FPGA driver updates - counter subsystem and driver updates - MHI driver updates - nvmem driver updates - documentation updates - Other smaller driver updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits) scripts/tags.sh: fix incompatibility with PCRE2 firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries mei: lower the log level for non-fatal failed messages mei: bus: disallow driver match while dismantling device misc: vmw_balloon: fix memory leak with using debugfs_lookup() nvmem: stm32: fix OPTEE dependency dt-bindings: nvmem: qfprom: add IPQ8074 compatible nvmem: qcom-spmi-sdam: register at device init time nvmem: rave-sp-eeprm: fix kernel-doc bad line warning nvmem: stm32: detect bsec pta presence for STM32MP15x nvmem: stm32: add OP-TEE support for STM32MP13x nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of() nvmem: core: add nvmem_add_one_cell() nvmem: core: drop the removal of the cells in nvmem_add_cells() nvmem: core: move struct nvmem_cell_info to nvmem-provider.h nvmem: core: add an index parameter to the cell of: property: add #nvmem-cell-cells property of: property: make #.*-cells optional for simple props of: base: add of_parse_phandle_with_optional_args() net: add helper eth_addr_add() ...
2023-02-24 12:47:33 -08:00 · 2023-02-24 12:47:33 -08:00 · 693fed981e
parent 0601f25d1c 6ec363fc61
commit 693fed981e
290 changed files with 12517 additions and 1945 deletions
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x
@ -236,7 +236,7 @@ What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/traceid
 Date:		November 2014
 KernelVersion:	3.19
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
-Description: 	(RW) Holds the trace ID that will appear in the trace stream
+Description: 	(RO) Holds the trace ID that will appear in the trace stream
 		coming from this trace entity.

 What:		/sys/bus/coresight/devices/<memory_map>.[etm|ptm]/trigger_event
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm
@ -0,0 +1,13 @@
+What:		/sys/bus/coresight/devices/<tpdm-name>/integration_test
+Date:		January 2023
+KernelVersion	6.2
+Contact:	Jinlong Mao (QUIC) <quic_jinlmao@quicinc.com>, Tao Zhang (QUIC) <quic_taozha@quicinc.com>
+Description:
+		(Write) Run integration test for tpdm. Integration test
+		will generate test data for tpdm. It can help to make
+		sure that the trace path is enabled and the link configurations
+		are fine.
+
+		Accepts only one of the 2 values -  1 or 2.
+		1 : Generate 64 bits data
+		2 : Generate 32 bits data
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
@ -0,0 +1,31 @@
+What:		/sys/bus/coresight/devices/ultra_smb<N>/enable_sink
+Date:		January 2023
+KernelVersion:	6.3
+Contact:	Junhao He <hejunhao3@huawei.com>
+Description:	(RW) Add/remove a SMB device from a trace path. There can be
+		multiple sources for a single SMB device.
+
+What:		/sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
+Date:		January 2023
+KernelVersion:	6.3
+Contact:	Junhao He <hejunhao3@huawei.com>
+Description:	(RO) Shows the buffer size of each UltraSoc SMB device.
+
+What:		/sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
+Date:		January 2023
+KernelVersion:	6.3
+Contact:	Junhao He <hejunhao3@huawei.com>
+Description:	(RO) Shows the value of UltraSoc SMB status register.
+		BIT(0) is zero means buffer is empty.
+
+What:		/sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
+Date:		January 2023
+KernelVersion:	6.3
+Contact:	Junhao He <hejunhao3@huawei.com>
+Description:	(RO) Shows the value of UltraSoc SMB Read Pointer register.
+
+What:		/sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
+Date:		January 2023
+KernelVersion:	6.3
+Contact:	Junhao He <hejunhao3@huawei.com>
+Description:	(RO) Shows the value of UltraSoc SMB Write Pointer register.
--- a/Documentation/ABI/testing/sysfs-driver-uacce
+++ b/Documentation/ABI/testing/sysfs-driver-uacce
@ -19,6 +19,24 @@ Contact:        linux-accelerators@lists.ozlabs.org
 Description:    Available instances left of the device
                Return -ENODEV if uacce_ops get_available_instances is not provided

+What:           /sys/class/uacce/<dev_name>/isolate_strategy
+Date:           Nov 2022
+KernelVersion:  6.1
+Contact:        linux-accelerators@lists.ozlabs.org
+Description:    (RW) A sysfs node that configure the error threshold for the hardware
+                isolation strategy. This size is a configured integer value, which is the
+                number of threshold for hardware errors occurred in one hour. The default is 0.
+                0 means never isolate the device. The maximum value is 65535. You can write
+                a number of threshold based on your hardware.
+
+What:           /sys/class/uacce/<dev_name>/isolate
+Date:           Nov 2022
+KernelVersion:  6.1
+Contact:        linux-accelerators@lists.ozlabs.org
+Description:    (R) A sysfs node that read the device isolated state. The value 1
+                means the device is unavailable. The 0 means the device is
+                available.
+
 What:           /sys/class/uacce/<dev_name>/algorithms
 Date:           Feb 2020
 KernelVersion:  5.7
--- a/Documentation/ABI/testing/sysfs-driver-xilinx-tmr-manager
+++ b/Documentation/ABI/testing/sysfs-driver-xilinx-tmr-manager
@ -0,0 +1,16 @@
+What:          /sys/devices/platform/amba_pl/<dev>/errcnt
+Date:          Nov 2022
+Contact:       appana.durga.kedareswara.rao@amd.com
+Description:   This control file provides the fault detection count.
+               This file cannot be written.
+               Example:
+               # cat /sys/devices/platform/amba_pl/44a10000.tmr_manager/errcnt
+               1
+
+What:          /sys/devices/platform/amba_pl/<dev>/dis_block_break
+Date:          Nov 2022
+Contact:       appana.durga.kedareswara.rao@amd.com
+Description:   Write any value to it, This control file enables the break signal.
+               This file is write only.
+               Example:
+               # echo <any value> > /sys/devices/platform/amba_pl/44a10000.tmr_manager/dis_block_break
--- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-tpda.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trace, Profiling and Diagnostics Aggregator - TPDA
+
+description: |
+  TPDAs are responsible for packetization and timestamping of data sets
+  utilizing the MIPI STPv2 packet protocol. Pulling data sets from one or
+  more attached TPDM and pushing the resultant (packetized) data out a
+  master ATB interface. Performing an arbitrated ATB interleaving (funneling)
+  task for free-flowing data from TPDM (i.e. CMB and DSB data set flows).
+
+  There is no strict binding between TPDM and TPDA. TPDA can have multiple
+  TPDMs connect to it. But There must be only one TPDA in the path from the
+  TPDM source to TMC sink. TPDM can directly connect to TPDA's inport or
+  connect to funnel which will connect to TPDA's inport.
+
+  We can use the commands are similar to the below to validate TPDMs.
+  Enable coresight sink first.
+
+  echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
+  echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
+  echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
+  echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
+
+  The test data will be collected in the coresight sink which is enabled.
+  If rwp register of the sink is keeping updating when do integration_test
+  (by cat tmc_etf0/mgmt/rwp), it means there is data generated from TPDM
+  to sink.
+
+maintainers:
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Tao Zhang <quic_taozha@quicinc.com>
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,coresight-tpda
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^tpda(@[0-9a-f]+)$"
+  compatible:
+    items:
+      - const: qcom,coresight-tpda
+      - const: arm,primecell
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb_pclk
+
+  in-ports:
+    type: object
+    description: |
+      Input connections from TPDM to TPDA
+    $ref: /schemas/graph.yaml#/properties/ports
+
+  out-ports:
+    type: object
+    description: |
+      Output connections from the TPDA to legacy CoreSight trace bus.
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description:
+          Output connection from the TPDA to legacy CoreSight Trace bus.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - in-ports
+  - out-ports
+
+additionalProperties: false
+
+examples:
+  # minimum tpda definition.
+  - |
+    tpda@6004000 {
+       compatible = "qcom,coresight-tpda", "arm,primecell";
+       reg = <0x6004000 0x1000>;
+
+       clocks = <&aoss_qmp>;
+       clock-names = "apb_pclk";
+
+       in-ports {
+         #address-cells = <1>;
+         #size-cells = <0>;
+
+        port@0 {
+          reg = <0>;
+          tpda_qdss_0_in_tpdm_dcc: endpoint {
+            remote-endpoint =
+              <&tpdm_dcc_out_tpda_qdss_0>;
+            };
+        };
+      };
+
+       out-ports {
+         port {
+                 tpda_qdss_out_funnel_in0: endpoint {
+                    remote-endpoint =
+                    <&funnel_in0_in_tpda_qdss>;
+                  };
+          };
+       };
+    };
+
+...
--- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpdm.yaml
@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+# Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/qcom,coresight-tpdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trace, Profiling and Diagnostics Monitor - TPDM
+
+description: |
+  The TPDM or Monitor serves as data collection component for various dataset
+  types specified in the QPMDA spec. It covers Implementation defined ((ImplDef),
+  Basic Counts (BC), Tenure Counts (TC), Continuous Multi-Bit (CMB), and Discrete
+  Single Bit (DSB). It performs data collection in the data producing clock
+  domain and transfers it to the data collection time domain, generally ATB
+  clock domain.
+
+  The primary use case of the TPDM is to collect data from different data
+  sources and send it to a TPDA for packetization, timestamping, and funneling.
+
+maintainers:
+  - Mao Jinlong <quic_jinlmao@quicinc.com>
+  - Tao Zhang <quic_taozha@quicinc.com>
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - qcom,coresight-tpdm
+  required:
+    - compatible
+
+properties:
+  $nodename:
+    pattern: "^tpdm(@[0-9a-f]+)$"
+  compatible:
+    items:
+      - const: qcom,coresight-tpdm
+      - const: arm,primecell
+
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: apb_pclk
+
+  out-ports:
+    description: |
+      Output connections from the TPDM to coresight funnel/TPDA.
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port:
+        description: Output connection from the TPDM to coresight
+            funnel/TPDA.
+        $ref: /schemas/graph.yaml#/properties/port
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  # minimum TPDM definition. TPDM connect to coresight TPDA.
+  - |
+    tpdm@684c000 {
+      compatible = "qcom,coresight-tpdm", "arm,primecell";
+      reg = <0x0684c000 0x1000>;
+
+      clocks = <&aoss_qmp>;
+      clock-names = "apb_pclk";
+
+      out-ports {
+        port {
+          tpdm_prng_out_tpda_qdss: endpoint {
+            remote-endpoint =
+              <&tpda_qdss_in_tpdm_prng>;
+          };
+        };
+      };
+    };
+
+...
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
@ -41,7 +41,7 @@ unevaluatedProperties: false
 examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@ -39,7 +39,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
@ -59,7 +59,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@ -49,7 +49,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

@ -64,7 +64,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@ -39,7 +39,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
-        i2c0 {
+    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

@ -54,7 +54,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
-        spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
@ -36,7 +36,7 @@ unevaluatedProperties: false
 examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.yaml
@ -44,7 +44,7 @@ examples:

        accel@f {
            compatible = "kionix,kxtf9";
-            reg = <0x0F>;
+            reg = <0xf>;
            mount-matrix = "0", "1", "0",
                           "1", "0", "0",
                           "0", "0", "1";
--- a/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/memsensing,msa311.yaml
@ -1,9 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#

 title: MEMSensing digital 3-Axis accelerometer

--- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@ -50,7 +50,7 @@ unevaluatedProperties: false
 examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

@ -65,7 +65,7 @@ examples:
    };
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7124.yaml
@ -61,7 +61,7 @@ required:

 patternProperties:
  "^channel@([0-9]|1[0-5])$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
    type: object
    description: |
      Represents the external channels which are connected to the ADC.
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@ -99,7 +99,7 @@ unevaluatedProperties: false

 examples:
  - |
-    spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@ -43,7 +43,7 @@ required:

 patternProperties:
  "^channel@[0-7]$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
    type: object
    description: |
      Represents the external channels which are connected to the ADC.
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@ -112,7 +112,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@ -72,7 +72,7 @@ additionalProperties: false
 examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
-    spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/atmel,sama5d2-adc.yaml
@ -41,7 +41,7 @@ properties:
    description: Startup time expressed in ms, it depends on SoC.

  atmel,trigger-edge-type:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      One of possible edge types for the ADTRG hardware trigger pin.
      When the specific edge type is detected, the conversion will
--- a/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/avia-hx711.yaml
@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#

 title: AVIA HX711 ADC chip for weight cells

--- a/Documentation/devicetree/bindings/iio/adc/cirrus,ep9301-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/cirrus,ep9301-adc.yaml
@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/cirrus,ep9301-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic EP930x internal ADC
+
+description: |
+  Cirrus Logic EP9301/EP9302 SoCs' internal ADC block.
+
+  User's manual:
+  https://cdn.embeddedts.com/resource-attachments/ts-7000_ep9301-ug.pdf
+
+maintainers:
+  - Alexander Sverdlin <alexander.sverdlin@gmail.com>
+
+properties:
+  compatible:
+    const: cirrus,ep9301-adc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    adc: adc@80900000 {
+        compatible = "cirrus,ep9301-adc";
+        reg = <0x80900000 0x28>;
+        clocks = <&syscon 24>;
+        interrupt-parent = <&vic1>;
+        interrupts = <30>;
+    };
+...
--- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
@ -2,8 +2,8 @@
 # Copyright 2019-2020 Artur Rojek
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#

 title: Ingenic JZ47xx ADC controller IIO

--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1238.yaml
@ -10,7 +10,7 @@ maintainers:
  - Jonathan Cameron <jic23@kernel.org>

 description: |
-  Family of simple ADCs with i2c inteface and internal references.
+  Family of simple ADCs with i2c interface and internal references.

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/maxim,max1363.yaml
@ -10,7 +10,7 @@ maintainers:
  - Jonathan Cameron <jic23@kernel.org>

 description: |
-   Family of ADCs with i2c inteface, internal references and threshold
+   Family of ADCs with i2c interface, internal references and threshold
   monitoring.

 properties:
--- a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
@ -2,8 +2,8 @@
 # Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#

 title: Microchip MCP3911 Dual channel analog front end (ADC)

--- a/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/nxp,imx93-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP iMX93 ADC
+
+maintainers:
+  - Haibo Chen <haibo.chen@nxp.com>
+
+description:
+  The ADC on iMX93 is a 8-channel 12-bit 1MS/s ADC with 4 channels
+  connected to pins. it support normal and inject mode, include
+  One-Shot and Scan (continuous) conversions. Programmable DMA
+  enables for each channel  Also this ADC contain alternate analog
+  watchdog thresholds, select threshold through input ports. And
+  also has Self-test logic and Software-initiated calibration.
+
+properties:
+  compatible:
+    const: nxp,imx93-adc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: WDGnL, watchdog threshold interrupt requests.
+      - description: WDGnH, watchdog threshold interrupt requests.
+      - description: normal conversion, include EOC (End of Conversion),
+          ECH (End of Chain), JEOC (End of Injected Conversion) and
+          JECH (End of injected Chain).
+      - description: Self-testing Interrupts.
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: ipg
+
+  vref-supply:
+    description:
+      The reference voltage which used to establish channel scaling.
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - vref-supply
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/clock/imx93-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        adc@44530000 {
+            compatible = "nxp,imx93-adc";
+            reg = <0x44530000 0x10000>;
+            interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+            clocks = <&clk IMX93_CLK_ADC1_GATE>;
+            clock-names = "ipg";
+            vref-supply = <&reg_vref_1v8>;
+            #io-channel-cells = <1>;
+        };
+    };
+...
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@ -20,6 +20,7 @@ properties:
  compatible:
    items:
      - enum:
+          - qcom,pm8226-iadc
          - qcom,pm8941-iadc
      - const: qcom,spmi-iadc

@ -49,7 +50,7 @@ additionalProperties: false
 examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
-    spmi_bus {
+    spmi {
        #address-cells = <1>;
        #size-cells = <0>;
        pmic_iadc: adc@3600 {
--- a/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
@ -69,7 +69,7 @@ required:

 patternProperties:
  "^channel@[0-7]$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
    type: object
    description: |
      Represents the external channels which are connected to the ADC.
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@ -52,7 +52,7 @@ properties:
  vdd-supply: true

  samsung,syscon-phandle:
-    $ref: '/schemas/types.yaml#/definitions/phandle'
+    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      Phandle to the PMU system controller node (to access the ADC_PHY
      register on Exynos3250/4x12/5250/5420/5800).
@ -150,7 +150,7 @@ examples:

    adc@126c0000 {
        compatible = "samsung,exynos3250-adc";
-        reg = <0x126C0000 0x100>;
+        reg = <0x126c0000 0x100>;
        interrupts = <0 137 0>;
        #io-channel-cells = <1>;

--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#

 title: STMicroelectronics STM32 ADC

@ -80,7 +80,7 @@ properties:
    description:
      Phandle to system configuration controller. It can be used to control the
      analog circuitry on stm32mp1.
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array

  interrupt-controller: true

@ -341,7 +341,7 @@ patternProperties:
    patternProperties:
      "^channel@([0-9]|1[0-9])$":
        type: object
-        $ref: "adc.yaml"
+        $ref: adc.yaml
        description: Represents the external channels which are connected to the ADC.

        properties:
--- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
@ -35,10 +35,8 @@ additionalProperties: false

 examples:
  - |
-    stmpe {
-        stmpe_adc {
+    adc {
        compatible = "st,stmpe-adc";
-            st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
-        };
+        st,norequest-mask = <0x0f>; /* dont use ADC CH3-0 */
    };
 ...
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc081c.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc081c.yaml
@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,adc081c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI Single-channel I2C ADCs
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+  - Lars-Peter Clausen <lars@metafoo.de>
+
+description: |
+  Single-channel ADC supporting 8, 10, or 12-bit samples and high/low alerts.
+
+properties:
+  compatible:
+    enum:
+      - ti,adc081c
+      - ti,adc101c
+      - ti,adc121c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      Regulator for the combined power supply and voltage reference
+
+  "#io-channel-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@52 {
+            compatible = "ti,adc081c";
+            reg = <0x52>;
+            vref-supply = <&reg_2p5v>;
+        };
+    };
+...
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads131e08.yaml
@ -77,7 +77,7 @@ required:

 patternProperties:
  "^channel@([0-7])$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
    type: object
    description: |
      Represents the external channels which are connected to the ADC.
--- a/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
@ -0,0 +1,110 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,ads7924.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI ADS7924 4 channels 12 bits I2C analog to digital converter
+
+maintainers:
+  - Hugo Villeneuve <hvilleneuve@dimonoff.com>
+
+description: |
+  Texas Instruments ADS7924 4 channels 12 bits I2C analog to digital converter
+
+  Specifications:
+    https://www.ti.com/lit/gpn/ads7924
+
+properties:
+  compatible:
+    const: ti,ads7924
+
+  reg:
+    maxItems: 1
+
+  vref-supply:
+    description:
+      The regulator supply for the ADC reference voltage (AVDD)
+
+  reset-gpios:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+patternProperties:
+  "^channel@[0-3]+$":
+    $ref: adc.yaml
+
+    description: |
+      Represents the external channels which are connected to the ADC.
+
+    properties:
+      reg:
+        description: |
+          The channel number. It can have up to 4 channels numbered from 0 to 3.
+        items:
+          - minimum: 0
+            maximum: 3
+
+      label: true
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - vref-supply
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@48 {
+            compatible = "ti,ads7924";
+            reg = <0x48>;
+            vref-supply = <&ads7924_reg>;
+            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+            interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+                reg = <0>;
+                label = "CH0";
+            };
+            channel@1 {
+                reg = <1>;
+                label = "CH1";
+            };
+            channel@2 {
+                reg = <2>;
+                label = "CH2";
+            };
+            channel@3 {
+                reg = <3>;
+                label = "CH3";
+            };
+        };
+    };
+...
--- a/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml
@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/adc/ti,lmp92064.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LMP92064 Precision Current and Voltage Sensor.
+
+maintainers:
+  - Leonard Göhrs <l.goehrs@pengutronix.de>
+
+description: |
+  The LMP92064 is a two channel ADC intended for combined voltage and current
+  measurements.
+
+  The device contains two ADCs to allow simultaneous sampling of voltage and
+  current and thus of instantaneous power consumption.
+
+properties:
+  compatible:
+    enum:
+      - ti,lmp92064
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Regulator that provides power to the main part of the chip
+
+  vdig-supply:
+    description: |
+      Regulator that provides power to the digital I/O part of the chip
+
+  shunt-resistor-micro-ohms:
+    description: |
+      Value of the shunt resistor (in µΩ) connected between INCP and INCN,
+      across which current is measured. Used to provide correct scaling of the
+      raw ADC measurement.
+
+  reset-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - shunt-resistor-micro-ohms
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@0 {
+            compatible = "ti,lmp92064";
+            reg = <0>;
+            vdd-supply = <&vdd>;
+            vdig-supply = <&vdd>;
+            spi-max-frequency = <20000000>;
+            shunt-resistor-micro-ohms = <15000>;
+            reset-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+        };
+    };
+...
--- a/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
@ -41,7 +41,7 @@ required:

 patternProperties:
  "^channel@[0-7]$":
-    $ref: "adc.yaml"
+    $ref: adc.yaml
    type: object

    properties:
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5380.yaml
@ -12,6 +12,7 @@ maintainers:

 description: |
  DAC devices supporting both SPI and I2C interfaces.
+
 properties:
  compatible:
    enum:
--- a/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/adi,ad5686.yaml
@ -33,6 +33,7 @@ properties:
      - description: I2C devices
        enum:
          - adi,ad5311r
+          - adi,ad5337r
          - adi,ad5338r
          - adi,ad5671r
          - adi,ad5675r
--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc1660.yaml
@ -2,8 +2,8 @@
 # Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com>
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#

 title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs

--- a/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#

 title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC

--- a/Documentation/devicetree/bindings/iio/dac/maxim,max5522.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/maxim,max5522.yaml
@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/maxim,max5522.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX5522 Dual 10-bit Voltage-Output SPI DACs
+
+maintainers:
+  - Angelo Dureghello <angelo.dureghello@timesys.com>
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  Datasheet available at:
+  https://www.analog.com/en/products/max5522.html
+
+properties:
+  compatible:
+    const: maxim,max5522
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vrefin-supply: true
+
+required:
+  - compatible
+  - reg
+  - vrefin-supply
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        dac@0 {
+            compatible = "maxim,max5522";
+            reg = <0>;
+            vrefin-supply = <&vref>;
+        };
+    };
+...
--- a/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
@ -1,8 +1,8 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#

 title: STMicroelectronics STM32 DAC

--- a/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
+++ b/Documentation/devicetree/bindings/iio/dac/ti,dac5571.yaml
@ -46,7 +46,7 @@ examples:

        dac@4c {
            compatible = "ti,dac5571";
-            reg = <0x4C>;
+            reg = <0x4c>;
            vref-supply = <&vdd_supply>;
        };
    };
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@ -53,7 +53,7 @@ unevaluatedProperties: false

 examples:
  - |
-    spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
@ -65,7 +65,7 @@ examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>

-    i2c0 {
+    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

@ -81,7 +81,7 @@ examples:
            interrupt-names = "INT1";
        };
    };
-    spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
@ -42,7 +42,7 @@ examples:
        #address-cells = <1>;
        #size-cells = <0>;

-        heart_mon@0 {
+        heart-mon@0 {
            compatible = "ti,afe4403";
            reg = <0>;
            spi-max-frequency = <10000000>;
--- a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
@ -39,7 +39,7 @@ examples:
        #address-cells = <1>;
        #size-cells = <0>;

-        heart_mon@58 {
+        heart-mon@58 {
            compatible = "ti,afe4404";
            reg = <0x58>;
            tx-supply = <&vbat>;
--- a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
@ -34,7 +34,7 @@ additionalProperties: false

 examples:
  - |
-    humidity_sensor {
+    humidity-sensor {
        compatible = "dht11";
        gpios = <&gpio0 6 0>;
    };
--- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@ -35,7 +35,7 @@ additionalProperties: false

 examples:
  - |
-    i2c0 {
+    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@ -42,7 +42,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@ -65,7 +65,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

@ -81,7 +81,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@ -49,7 +49,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

@ -65,7 +65,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
-    spi0 {
+    spi {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/st,lsm6dsx.yaml
@ -63,7 +63,7 @@ properties:
    description: if defined provides VDD IO power to the sensor.

  st,drdy-int-pin:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
    description: |
      The pin on the package that will be used to signal data ready
    enum:
--- a/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
+++ b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor
+
+maintainers:
+  - Gerald Loacker <gerald.loacker@wolfvision.net>
+
+description:
+  The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device
+  integrates three independent Hall-effect sensors in the X, Y, and Z axes.
+  The device has an integrated temperature sensor available. The TMAG5273
+  can be configured through the I2C interface to enable any combination of
+  magnetic axes and temperature measurements. An integrated angle calculation
+  engine (CORDIC) provides full 360° angular position information for both
+  on-axis and off-axis angle measurement topologies. The angle calculation is
+  performed using two user-selected magnetic axes.
+
+properties:
+  compatible:
+    const: ti,tmag5273
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  ti,angle-measurement:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Enables angle measurement in the selected plane.
+      If not specified, "x-y" will be anables as default.
+    enum:
+      - off
+      - x-y
+      - y-z
+      - x-z
+
+  vcc-supply:
+    description:
+      A regulator providing 1.7 V to 3.6 V supply voltage on the VCC pin,
+      typically 3.3 V.
+
+  interrupts:
+    description:
+      The low active interrupt can be configured to be fixed width or latched.
+      Interrupt events can be configured to be generated from magnetic
+      thresholds or when a conversion is completed.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@35 {
+            compatible = "ti,tmag5273";
+            reg = <0x35>;
+            #io-channel-cells = <1>;
+            ti,angle-measurement = "x-z";
+            vcc-supply = <&vcc3v3>;
+        };
+    };
+...
--- a/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
+++ b/Documentation/devicetree/bindings/iio/potentiometer/adi,ad5272.yaml
@ -44,7 +44,7 @@ examples:

        potentiometer@2f {
            compatible = "adi,ad5272-020";
-            reg = <0x2F>;
+            reg = <0x2f>;
            reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
        };
    };
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@ -39,7 +39,7 @@ examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>

-    i2c0 {
+    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@ -60,7 +60,7 @@ examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    #include <dt-bindings/interrupt-controller/irq.h>
-    i2c0 {
+    i2c {
        #address-cells = <1>;
        #size-cells = <0>;
        pressure@77 {
--- a/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml
@ -1,7 +1,6 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-
 $id: http://devicetree.org/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#

--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml
@ -36,7 +36,7 @@ properties:
    const: 1

  semtech,resolution:
-    $ref: /schemas/types.yaml#/definitions/uint32-array
+    $ref: /schemas/types.yaml#/definitions/uint32
    enum: [8, 16, 32, 64, 128, 256, 512, 1024]
    description:
      Capacitance measurement resolution. For both phases, "reference" and
--- a/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
+++ b/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
@ -39,6 +39,7 @@ properties:
          - st,lis3lv02dl-accel
          - st,lng2dm-accel
          - st,lsm303agr-accel
+          - st,lsm303c-accel
          - st,lsm303dl-accel
          - st,lsm303dlh-accel
          - st,lsm303dlhc-accel
@ -66,6 +67,7 @@ properties:
          - st,lis2mdl
          - st,lis3mdl-magn
          - st,lsm303agr-magn
+          - st,lsm303c-magn
          - st,lsm303dlh-magn
          - st,lsm303dlhc-magn
          - st,lsm303dlm-magn
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@ -519,9 +519,9 @@ examples:
                reg = <12>;
                adi,sensor-type = <26>; //Steinhart
                adi,rsense-handle = <&rsense2>;
-                        adi,custom-steinhart = <0x00F371EC 0x12345678
-                                        0x2C0F8733 0x10018C66 0xA0FEACCD
-                                        0x90021D99>; //6 entries
+                adi,custom-steinhart = <0x00f371ec 0x12345678
+                                0x2c0f8733 0x10018c66 0xa0feaccd
+                                0x90021d99>; //6 entries
            };

            thermocouple@20 {
@ -540,7 +540,6 @@ examples:
                         /bits/ 64 <188700000 922500000>,
                         /bits/ 64 <460400000 1000000000>; //10 pairs
            };
-
        };
    };
 ...
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@ -43,7 +43,7 @@ examples:
       #address-cells = <1>;
       #size-cells = <0>;

-       temp_sensor@0 {
+       temperature-sensor@0 {
           compatible = "maxim,max31865";
           reg = <0>;
           spi-max-frequency = <400000>;
--- a/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/ti,tmp117.yaml
@ -1,10 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#

-title: "TI TMP117 - Digital temperature sensor with integrated NV memory"
+title: TI TMP117 - Digital temperature sensor with integrated NV memory

 description: |
    TI TMP117 - Digital temperature sensor with integrated NV memory that supports
--- a/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
@ -27,11 +27,13 @@ properties:
              - qcom,sc7280-cpu-bwmon
              - qcom,sc8280xp-cpu-bwmon
              - qcom,sdm845-bwmon
+              - qcom,sm8550-cpu-bwmon
          - const: qcom,msm8998-bwmon
      - const: qcom,msm8998-bwmon       # BWMON v4
      - items:
          - enum:
              - qcom,sc8280xp-llcc-bwmon
+              - qcom,sm8550-llcc-bwmon
          - const: qcom,sc7280-llcc-bwmon
      - const: qcom,sc7280-llcc-bwmon   # BWMON v5
      - const: qcom,sdm845-llcc-bwmon   # BWMON v5
--- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@ -22,6 +22,7 @@ properties:
              - qcom,sc7180-osm-l3
              - qcom,sc8180x-osm-l3
              - qcom,sdm845-osm-l3
+              - qcom,sm6350-osm-l3
              - qcom,sm8150-osm-l3
          - const: qcom,osm-l3
      - items:
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpm.yaml
@ -62,6 +62,37 @@ properties:
  power-domains:
    maxItems: 1

+# Child node's properties
+patternProperties:
+  '^interconnect-[a-z0-9]+$':
+    type: object
+    description:
+      snoc-mm is a child of snoc, sharing snoc's register address space.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,msm8939-snoc-mm
+
+      '#interconnect-cells':
+        const: 1
+
+      clock-names:
+        items:
+          - const: bus
+          - const: bus_a
+
+      clocks:
+        items:
+          - description: Bus Clock
+          - description: Bus A Clock
+
+    required:
+      - compatible
+      - '#interconnect-cells'
+      - clock-names
+      - clocks
+
 required:
  - compatible
  - reg
@ -108,37 +139,6 @@ allOf:
            - description: Bus Clock
            - description: Bus A Clock

-      # Child node's properties
-      patternProperties:
-        '^interconnect-[a-z0-9]+$':
-          type: object
-          description:
-            snoc-mm is a child of snoc, sharing snoc's register address space.
-
-          properties:
-            compatible:
-              enum:
-                - qcom,msm8939-snoc-mm
-
-            '#interconnect-cells':
-              const: 1
-
-            clock-names:
-              items:
-                - const: bus
-                - const: bus_a
-
-            clocks:
-              items:
-                - description: Bus Clock
-                - description: Bus A Clock
-
-          required:
-            - compatible
-            - '#interconnect-cells'
-            - clock-names
-            - clocks
-
  - if:
      properties:
        compatible:
@ -237,6 +237,17 @@ allOf:
            - description: Aggregate2 USB3 AXI Clock.
            - description: Config NoC USB2 AXI Clock.

+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - qcom,msm8939-snoc
+    then:
+      patternProperties:
+        '^interconnect-[a-z0-9]+$': false
+
 examples:
  - |
      #include <dt-bindings/clock/qcom,rpmcc.h>
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@ -39,18 +39,6 @@ properties:
      - qcom,sc7180-npu-noc
      - qcom,sc7180-qup-virt
      - qcom,sc7180-system-noc
-      - qcom,sc7280-aggre1-noc
-      - qcom,sc7280-aggre2-noc
-      - qcom,sc7280-clk-virt
-      - qcom,sc7280-cnoc2
-      - qcom,sc7280-cnoc3
-      - qcom,sc7280-dc-noc
-      - qcom,sc7280-gem-noc
-      - qcom,sc7280-lpass-ag-noc
-      - qcom,sc7280-mc-virt
-      - qcom,sc7280-mmss-noc
-      - qcom,sc7280-nsp-noc
-      - qcom,sc7280-system-noc
      - qcom,sc8180x-aggre1-noc
      - qcom,sc8180x-aggre2-noc
      - qcom,sc8180x-camnoc-virt
@ -58,23 +46,18 @@ properties:
      - qcom,sc8180x-config-noc
      - qcom,sc8180x-dc-noc
      - qcom,sc8180x-gem-noc
-      - qcom,sc8180x-ipa-virt
      - qcom,sc8180x-mc-virt
      - qcom,sc8180x-mmss-noc
      - qcom,sc8180x-qup-virt
      - qcom,sc8180x-system-noc
-      - qcom,sc8280xp-aggre1-noc
-      - qcom,sc8280xp-aggre2-noc
-      - qcom,sc8280xp-clk-virt
-      - qcom,sc8280xp-config-noc
-      - qcom,sc8280xp-dc-noc
-      - qcom,sc8280xp-gem-noc
-      - qcom,sc8280xp-lpass-ag-noc
-      - qcom,sc8280xp-mc-virt
-      - qcom,sc8280xp-mmss-noc
-      - qcom,sc8280xp-nspa-noc
-      - qcom,sc8280xp-nspb-noc
-      - qcom,sc8280xp-system-noc
+      - qcom,sdm670-aggre1-noc
+      - qcom,sdm670-aggre2-noc
+      - qcom,sdm670-config-noc
+      - qcom,sdm670-dc-noc
+      - qcom,sdm670-gladiator-noc
+      - qcom,sdm670-mem-noc
+      - qcom,sdm670-mmss-noc
+      - qcom,sdm670-system-noc
      - qcom,sdm845-aggre1-noc
      - qcom,sdm845-aggre2-noc
      - qcom,sdm845-config-noc
@ -96,7 +79,6 @@ properties:
      - qcom,sm8150-config-noc
      - qcom,sm8150-dc-noc
      - qcom,sm8150-gem-noc
-      - qcom,sm8150-ipa-virt
      - qcom,sm8150-mc-virt
      - qcom,sm8150-mmss-noc
      - qcom,sm8150-system-noc
@ -106,7 +88,6 @@ properties:
      - qcom,sm8250-config-noc
      - qcom,sm8250-dc-noc
      - qcom,sm8250-gem-noc
-      - qcom,sm8250-ipa-virt
      - qcom,sm8250-mc-virt
      - qcom,sm8250-mmss-noc
      - qcom,sm8250-npu-noc
@ -121,17 +102,6 @@ properties:
      - qcom,sm8350-mmss-noc
      - qcom,sm8350-compute-noc
      - qcom,sm8350-system-noc
-      - qcom,sm8450-aggre1-noc
-      - qcom,sm8450-aggre2-noc
-      - qcom,sm8450-clk-virt
-      - qcom,sm8450-config-noc
-      - qcom,sm8450-gem-noc
-      - qcom,sm8450-lpass-ag-noc
-      - qcom,sm8450-mc-virt
-      - qcom,sm8450-mmss-noc
-      - qcom,sm8450-nsp-noc
-      - qcom,sm8450-pcie-anoc
-      - qcom,sm8450-system-noc

  '#interconnect-cells': true

--- a/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sa8775p-rpmh.yaml
@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sa8775p-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SA8775P
+
+maintainers:
+  - Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sa8775p.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sa8775p-aggre1-noc
+      - qcom,sa8775p-aggre2-noc
+      - qcom,sa8775p-clk-virt
+      - qcom,sa8775p-config-noc
+      - qcom,sa8775p-dc-noc
+      - qcom,sa8775p-gem-noc
+      - qcom,sa8775p-gpdsp-anoc
+      - qcom,sa8775p-lpass-ag-noc
+      - qcom,sa8775p-mc-virt
+      - qcom,sa8775p-mmss-noc
+      - qcom,sa8775p-nspa-noc
+      - qcom,sa8775p-nspb-noc
+      - qcom,sa8775p-pcie-anoc
+      - qcom,sa8775p-system-noc
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    aggre1_noc: interconnect-aggre1-noc {
+        compatible = "qcom,sa8775p-aggre1-noc";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
--- a/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sc7280-rpmh.yaml
@ -0,0 +1,71 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sc7280-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SC7280
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sc7280.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc7280-aggre1-noc
+      - qcom,sc7280-aggre2-noc
+      - qcom,sc7280-clk-virt
+      - qcom,sc7280-cnoc2
+      - qcom,sc7280-cnoc3
+      - qcom,sc7280-dc-noc
+      - qcom,sc7280-gem-noc
+      - qcom,sc7280-lpass-ag-noc
+      - qcom,sc7280-mc-virt
+      - qcom,sc7280-mmss-noc
+      - qcom,sc7280-nsp-noc
+      - qcom,sc7280-system-noc
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-clk-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interconnect {
+        compatible = "qcom,sc7280-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    interconnect@9100000 {
+        reg = <0x9100000 0xe2200>;
+        compatible = "qcom,sc7280-gem-noc";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
--- a/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sc8280xp-rpmh.yaml
@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sc8280xp-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SC8280XP
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sc8280xp.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-aggre1-noc
+      - qcom,sc8280xp-aggre2-noc
+      - qcom,sc8280xp-clk-virt
+      - qcom,sc8280xp-config-noc
+      - qcom,sc8280xp-dc-noc
+      - qcom,sc8280xp-gem-noc
+      - qcom,sc8280xp-lpass-ag-noc
+      - qcom,sc8280xp-mc-virt
+      - qcom,sc8280xp-mmss-noc
+      - qcom,sc8280xp-nspa-noc
+      - qcom,sc8280xp-nspb-noc
+      - qcom,sc8280xp-system-noc
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    interconnect-0 {
+        compatible = "qcom,sc8280xp-aggre1-noc";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
--- a/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,sm8450-rpmh.yaml
@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interconnect/qcom,sm8450-rpmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPMh Network-On-Chip Interconnect on SM8450
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description: |
+  RPMh interconnect providers support system bandwidth requirements through
+  RPMh hardware accelerators known as Bus Clock Manager (BCM).
+
+  See also:: include/dt-bindings/interconnect/qcom,sm8450.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8450-aggre1-noc
+      - qcom,sm8450-aggre2-noc
+      - qcom,sm8450-clk-virt
+      - qcom,sm8450-config-noc
+      - qcom,sm8450-gem-noc
+      - qcom,sm8450-lpass-ag-noc
+      - qcom,sm8450-mc-virt
+      - qcom,sm8450-mmss-noc
+      - qcom,sm8450-nsp-noc
+      - qcom,sm8450-pcie-anoc
+      - qcom,sm8450-system-noc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+required:
+  - compatible
+
+allOf:
+  - $ref: qcom,rpmh-common.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-clk-virt
+              - qcom,sm8450-mc-virt
+    then:
+      properties:
+        reg: false
+    else:
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-aggre1-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre UFS PHY AXI clock
+            - description: aggre USB3 PRIM AXI clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-aggre2-noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: aggre-NOC PCIe 0 AXI clock
+            - description: aggre-NOC PCIe 1 AXI clock
+            - description: aggre UFS PHY AXI clock
+            - description: RPMH CC IPA clock
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-aggre1-noc
+              - qcom,sm8450-aggre2-noc
+    then:
+      required:
+        - clocks
+    else:
+      properties:
+        clocks: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    interconnect-0 {
+        compatible = "qcom,sm8450-clk-virt";
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+    };
+
+    interconnect@1700000 {
+        compatible = "qcom,sm8450-aggre2-noc";
+        reg = <0x01700000 0x31080>;
+        #interconnect-cells = <2>;
+        qcom,bcm-voters = <&apps_bcm_voter>;
+        clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+                 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+                 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+                 <&rpmhcc RPMH_IPA_CLK>;
+    };
--- a/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
+++ b/Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
@ -196,6 +196,8 @@ properties:
    maxItems: 2

  operating-points-v2: true
+  opp-table:
+    type: object

  samsung,data-clock-ratio:
    $ref: /schemas/types.yaml#/definitions/uint32
@ -227,6 +229,31 @@ examples:
        operating-points-v2 = <&bus_dmc_opp_table>;
        devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
        vdd-supply = <&buck1_reg>;
+
+        bus_dmc_opp_table: opp-table {
+            compatible = "operating-points-v2";
+
+            opp-50000000 {
+                opp-hz = /bits/ 64 <50000000>;
+                opp-microvolt = <800000>;
+            };
+            opp-100000000 {
+                opp-hz = /bits/ 64 <100000000>;
+                opp-microvolt = <800000>;
+            };
+            opp-134000000 {
+                opp-hz = /bits/ 64 <134000000>;
+                opp-microvolt = <800000>;
+            };
+            opp-200000000 {
+                opp-hz = /bits/ 64 <200000000>;
+                opp-microvolt = <825000>;
+            };
+            opp-400000000 {
+                opp-hz = /bits/ 64 <400000000>;
+                opp-microvolt = <875000>;
+            };
+        };
    };

    ppmu_dmc0: ppmu@106a0000 {
--- a/Documentation/devicetree/bindings/misc/xlnx,tmr-inject.yaml
+++ b/Documentation/devicetree/bindings/misc/xlnx,tmr-inject.yaml
@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/xlnx,tmr-inject.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Triple Modular Redundancy(TMR) Inject IP
+
+maintainers:
+  - Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
+
+description: |
+  The Triple Modular Redundancy(TMR) Inject core provides functional fault
+  injection by changing selected MicroBlaze instructions, which provides the
+  possibility to verify that the TMR subsystem error detection and fault
+  recovery logic is working properly.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,tmr-inject-1.0
+
+  reg:
+    maxItems: 1
+
+  xlnx,magic:
+    minimum: 0
+    maximum: 255
+    description: |
+      Magic number, When configured it allows the controller to perform
+      recovery.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - xlnx,magic
+
+additionalProperties: false
+
+examples:
+  - |
+    fault-inject@44a30000 {
+        compatible = "xlnx,tmr-inject-1.0";
+        reg = <0x44a10000 0x10000>;
+        xlnx,magic = <0x46>;
+    };
--- a/Documentation/devicetree/bindings/misc/xlnx,tmr-manager.yaml
+++ b/Documentation/devicetree/bindings/misc/xlnx,tmr-manager.yaml
@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/xlnx,tmr-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Triple Modular Redundancy(TMR) Manager IP
+
+maintainers:
+  - Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
+
+description: |
+  The Triple Modular Redundancy(TMR) Manager is responsible for handling the
+  TMR subsystem state, including fault detection and error recovery. The core
+  is triplicated in each of the sub-blocks in the TMR subsystem, and provides
+  majority voting of its internal state.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,tmr-manager-1.0
+
+  reg:
+    maxItems: 1
+
+  xlnx,magic1:
+    minimum: 0
+    maximum: 255
+    description:
+      Magic byte 1, When configured it allows the controller to perform
+      recovery.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+  - xlnx,magic1
+
+additionalProperties: false
+
+examples:
+  - |
+    tmr-manager@44a10000 {
+        compatible = "xlnx,tmr-manager-1.0";
+        reg = <0x44a10000 0x10000>;
+        xlnx,magic1 = <0x46>;
+    };
--- a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@ -19,16 +19,21 @@ properties:
          - qcom,apq8064-qfprom
          - qcom,apq8084-qfprom
          - qcom,ipq8064-qfprom
-          - qcom,msm8974-qfprom
+          - qcom,ipq8074-qfprom
          - qcom,msm8916-qfprom
+          - qcom,msm8974-qfprom
+          - qcom,msm8976-qfprom
          - qcom,msm8996-qfprom
          - qcom,msm8998-qfprom
          - qcom,qcs404-qfprom
          - qcom,sc7180-qfprom
          - qcom,sc7280-qfprom
          - qcom,sdm630-qfprom
+          - qcom,sdm670-qfprom
          - qcom,sdm845-qfprom
          - qcom,sm6115-qfprom
+          - qcom,sm8150-qfprom
+          - qcom,sm8250-qfprom
      - const: qcom,qfprom

  reg:
--- a/Documentation/kbuild/kbuild.rst
+++ b/Documentation/kbuild/kbuild.rst
@ -278,6 +278,13 @@ To get all available archs you can also specify all. E.g.::

    $ make ALLSOURCE_ARCHS=all tags

+IGNORE_DIRS
+-----------
+For tags/TAGS/cscope targets, you can choose which directories won't
+be included in the databases, separated by blank space. E.g.::
+
+    $ make IGNORE_DIRS="drivers/gpu/drm/radeon tools" cscope
+
 KBUILD_BUILD_TIMESTAMP
 ----------------------
 Setting this to a date string overrides the timestamp used in the
--- a/Documentation/trace/coresight/coresight-tpda.rst
+++ b/Documentation/trace/coresight/coresight-tpda.rst
@ -0,0 +1,52 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================================================================
+The trace performance monitoring and diagnostics aggregator(TPDA)
+=================================================================
+
+    :Author:   Jinlong Mao <quic_jinlmao@quicinc.com>
+    :Date:     January 2023
+
+Hardware Description
+--------------------
+
+TPDA - The trace performance monitoring and diagnostics aggregator or
+TPDA in short serves as an arbitration and packetization engine for the
+performance monitoring and diagnostics network specification.
+The primary use case of the TPDA is to provide packetization, funneling
+and timestamping of Monitor data.
+
+
+Sysfs files and directories
+---------------------------
+Root: ``/sys/bus/coresight/devices/tpda<N>``
+
+Config details
+---------------------------
+
+The tpdm and tpda nodes should be observed at the coresight path
+"/sys/bus/coresight/devices".
+e.g.
+/sys/bus/coresight/devices # ls -l | grep tpd
+tpda0 -> ../../../devices/platform/soc@0/6004000.tpda/tpda0
+tpdm0 -> ../../../devices/platform/soc@0/6c08000.mm.tpdm/tpdm0
+
+We can use the commands are similar to the below to validate TPDMs.
+Enable coresight sink first. The port of tpda which is connected to
+the tpdm will be enabled after commands below.
+
+echo 1 > /sys/bus/coresight/devices/tmc_etf0/enable_sink
+echo 1 > /sys/bus/coresight/devices/tpdm0/enable_source
+echo 1 > /sys/bus/coresight/devices/tpdm0/integration_test
+echo 2 > /sys/bus/coresight/devices/tpdm0/integration_test
+
+The test data will be collected in the coresight sink which is enabled.
+If rwp register of the sink is keeping updating when do
+integration_test (by cat tmc_etf0/mgmt/rwp), it means there is data
+generated from TPDM to sink.
+
+There must be a tpda between tpdm and the sink. When there are some
+other trace event hw components in the same HW block with tpdm, tpdm
+and these hw components will connect to the coresight funnel. When
+there is only tpdm trace hw in the HW block, tpdm will connect to
+tpda directly.
--- a/Documentation/trace/coresight/coresight-tpdm.rst
+++ b/Documentation/trace/coresight/coresight-tpdm.rst
@ -0,0 +1,45 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================================================
+Trace performance monitoring and diagnostics monitor(TPDM)
+==========================================================
+
+    :Author:   Jinlong Mao <quic_jinlmao@quicinc.com>
+    :Date:     January 2023
+
+Hardware Description
+--------------------
+TPDM - The trace performance monitoring and diagnostics monitor or TPDM in
+short serves as data collection component for various dataset types.
+The primary use case of the TPDM is to collect data from different data
+sources and send it to a TPDA for packetization, timestamping and funneling.
+
+Sysfs files and directories
+---------------------------
+Root: ``/sys/bus/coresight/devices/tpdm<N>``
+
+----
+
+:File:            ``enable_source`` (RW)
+:Notes:
+    - > 0 : enable the datasets of TPDM.
+
+    - = 0 : disable the datasets of TPDM.
+
+:Syntax:
+    ``echo 1 > enable_source``
+
+----
+
+:File:            ``integration_test`` (wo)
+:Notes:
+    Integration test will generate test data for tpdm.
+
+:Syntax:
+    ``echo value > integration_test``
+
+    value -  1 or 2.
+
+----
+
+.. This text is intentionally added to make Sphinx happy.
--- a/Documentation/trace/coresight/ultrasoc-smb.rst
+++ b/Documentation/trace/coresight/ultrasoc-smb.rst
@ -0,0 +1,83 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+UltraSoc - HW Assisted Tracing on SoC
+======================================
+   :Author:   Qi Liu <liuqi115@huawei.com>
+   :Date:     January 2023
+
+Introduction
+------------
+
+UltraSoc SMB is a per SCCL (Super CPU Cluster) hardware. It provides a
+way to buffer and store CPU trace messages in a region of shared system
+memory. The device acts as a coresight sink device and the
+corresponding trace generators (ETM) are attached as source devices.
+
+Sysfs files and directories
+---------------------------
+
+The SMB devices appear on the existing coresight bus alongside other
+devices::
+
+	$# ls /sys/bus/coresight/devices/
+	ultra_smb0   ultra_smb1   ultra_smb2   ultra_smb3
+
+The ``ultra_smb<N>`` names SMB device associated with SCCL.::
+
+	$# ls /sys/bus/coresight/devices/ultra_smb0
+	enable_sink   mgmt
+	$# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
+	buf_size  buf_status  read_pos  write_pos
+
+Key file items are:
+
+   * ``read_pos``: Shows the value on the read pointer register.
+   * ``write_pos``: Shows the value on the write pointer register.
+   * ``buf_status``: Shows the value on the status register.
+     BIT(0) is zero value which means the buffer is empty.
+   * ``buf_size``: Shows the buffer size of each device.
+
+Firmware Bindings
+-----------------
+
+The device is only supported with ACPI. Its binding describes device
+identifier, resource information and graph structure.
+
+The device is identified as ACPI HID "HISI03A1". Device resources are allocated
+using the _CRS method. Each device must present two base address; the first one
+is the configuration base address of the device, the second one is the 32-bit
+base address of shared system memory.
+
+Example::
+
+    Device(USMB) {                                               \
+      Name(_HID, "HISI03A1")                                     \
+      Name(_CRS, ResourceTemplate() {                            \
+          QWordMemory (ResourceConsumer, , MinFixed, MaxFixed, NonCacheable, \
+		       ReadWrite, 0x0, 0x95100000, 0x951FFFFF, 0x0, 0x100000) \
+          QWordMemory (ResourceConsumer, , MinFixed, MaxFixed, Cacheable, \
+		       ReadWrite, 0x0, 0x50000000, 0x53FFFFFF, 0x0, 0x4000000) \
+      })                                                         \
+      Name(_DSD, Package() {                                     \
+        ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"),          \
+	/* Use CoreSight Graph ACPI bindings to describe connections topology */
+        Package() {                                              \
+          0,                                                     \
+          1,                                                     \
+          Package() {                                            \
+            1,                                                   \
+            ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"),      \
+            8,                                                   \
+            Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0},       \
+            Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0},       \
+            Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0},       \
+            Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0},       \
+            Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0},       \
+            Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0},       \
+            Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0},       \
+            Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0},       \
+          }                                                      \
+        }                                                        \
+      })                                                         \
+    }
--- a/48
+++ b/48
@ -2071,8 +2071,10 @@ M:	Hartley Sweeten <hsweeten@visionengravers.com>
 M:	Alexander Sverdlin <alexander.sverdlin@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/iio/adc/cirrus,ep9301-adc.yaml
 F:	arch/arm/boot/compressed/misc-ep93xx.h
 F:	arch/arm/mach-ep93xx/
+F:	drivers/iio/adc/ep93xx_adc.c

 ARM/CLKDEV SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
@ -2099,6 +2101,7 @@ S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux.git
 F:	Documentation/ABI/testing/sysfs-bus-coresight-devices-*
 F:	Documentation/devicetree/bindings/arm/arm,coresight-*.yaml
+F:	Documentation/devicetree/bindings/arm/qcom,coresight-*.yaml
 F:	Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
 F:	Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml
 F:	Documentation/trace/coresight/*
@ -9254,11 +9257,15 @@ F:	drivers/perf/hisilicon/hns3_pmu.c

 HISILICON PTT DRIVER
 M:	Yicong Yang <yangyicong@hisilicon.com>
+M:	Jonathan Cameron <jonathan.cameron@huawei.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-devices-hisi_ptt
 F:	Documentation/trace/hisi-ptt.rst
 F:	drivers/hwtracing/ptt/
+F:	tools/perf/arch/arm64/util/hisi-ptt.c
+F:	tools/perf/util/hisi-ptt*
+F:	tools/perf/util/hisi-ptt-decoder/*

 HISILICON QM DRIVER
 M:	Weili Qian <qianweili@huawei.com>
@ -10454,6 +10461,7 @@ F:	drivers/watchdog/mei_wdt.c
 F:	include/linux/mei_aux.h
 F:	include/linux/mei_cl_bus.h
 F:	include/uapi/linux/mei.h
+F:	include/uapi/linux/uuid.h
 F:	samples/mei/*

 INTEL MAX 10 BMC MFD DRIVER
@ -13528,6 +13536,19 @@ W:	http://www.monstr.eu/fdt/
 T:	git git://git.monstr.eu/linux-2.6-microblaze.git
 F:	arch/microblaze/

+MICROBLAZE TMR MANAGER
+M:	Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
+S:	Supported
+F:	Documentation/ABI/testing/sysfs-driver-xilinx-tmr-manager
+F:	Documentation/devicetree/bindings/misc/xlnx,tmr-manager.yaml
+F:	drivers/misc/xilinx_tmr_manager.c
+
+MICROBLAZE TMR INJECT
+M:	Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com>
+S:	Supported
+F:	Documentation/devicetree/bindings/misc/xlnx,tmr-inject.yaml
+F:	drivers/misc/xilinx_tmr_inject.c
+
 MICROCHIP AT91 DMA DRIVERS
 M:	Ludovic Desroches <ludovic.desroches@microchip.com>
 M:	Tudor Ambarus <tudor.ambarus@linaro.org>
@ -14953,14 +14974,16 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/iio/adc/nxp,imx8qxp-adc.yaml
 F:	drivers/iio/adc/imx8qxp-adc.c

-NXP i.MX 7D/6SX/6UL AND VF610 ADC DRIVER
+NXP i.MX 7D/6SX/6UL/93 AND VF610 ADC DRIVER
 M:	Haibo Chen <haibo.chen@nxp.com>
 L:	linux-iio@vger.kernel.org
 L:	linux-imx@nxp.com
 S:	Maintained
 F:	Documentation/devicetree/bindings/iio/adc/fsl,imx7d-adc.yaml
 F:	Documentation/devicetree/bindings/iio/adc/fsl,vf610-adc.yaml
+F:	Documentation/devicetree/bindings/iio/adc/nxp,imx93-adc.yaml
 F:	drivers/iio/adc/imx7d_adc.c
+F:	drivers/iio/adc/imx93_adc.c
 F:	drivers/iio/adc/vf610_adc.c

 NXP PF8100/PF8121A/PF8200 PMIC REGULATOR DEVICE DRIVER
@ -20756,6 +20779,13 @@ M:	Robert Richter <rric@kernel.org>
 S:	Odd Fixes
 F:	drivers/gpio/gpio-thunderx.c

+TI ADS7924 ADC DRIVER
+M:	Hugo Villeneuve <hvilleneuve@dimonoff.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/iio/adc/ti,ads7924.yaml
+F:	drivers/iio/adc/ti-ads7924.c
+
 TI AM437X VPFE DRIVER
 M:	"Lad, Prabhakar" <prabhakar.csengg@gmail.com>
 L:	linux-media@vger.kernel.org
@ -20875,6 +20905,14 @@ S:	Maintained
 F:	sound/soc/codecs/isabelle*
 F:	sound/soc/codecs/lm49453*

+TI LMP92064 ADC DRIVER
+M:	Leonard Göhrs <l.goehrs@pengutronix.de>
+R:	kernel@pengutronix.de
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/adc/ti,lmp92064.yaml
+F:	drivers/iio/adc/ti-lmp92064.c
+
 TI PCM3060 ASoC CODEC DRIVER
 M:	Kirill Marinushkin <kmarinushkin@birdec.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
@ -20888,6 +20926,13 @@ L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Odd Fixes
 F:	sound/soc/codecs/tas571x*

+TI TMAG5273 MAGNETOMETER DRIVER
+M:	Gerald Loacker <gerald.loacker@wolfvision.net>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
+F:	drivers/iio/magnetometer/tmag5273.c
+
 TI TRF7970A NFC DRIVER
 M:	Mark Greer <mgreer@animalcreek.com>
 L:	linux-wireless@vger.kernel.org
@ -21789,7 +21834,6 @@ R:	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	include/linux/uuid.h
-F:	include/uapi/linux/uuid.h
 F:	lib/test_uuid.c
 F:	lib/uuid.c

--- a/drivers/accessibility/speakup/main.c
+++ b/drivers/accessibility/speakup/main.c
@ -2490,7 +2490,7 @@ MODULE_PARM_DESC(punc_level, "Controls the level of punctuation spoken as the sc
 MODULE_PARM_DESC(reading_punc, "It controls the level of punctuation when reviewing the screen with speakup's screen review commands.");
 MODULE_PARM_DESC(cursor_time, "This controls cursor delay when using arrow keys.");
 MODULE_PARM_DESC(say_control, "This controls if speakup speaks shift, alt and control when those keys are pressed or not.");
-MODULE_PARM_DESC(say_word_ctl, "Sets thw say_word_ctl  on load.");
+MODULE_PARM_DESC(say_word_ctl, "Sets the say_word_ctl on load.");
 MODULE_PARM_DESC(no_interrupt, "Controls if typing interrupts output from speakup.");
 MODULE_PARM_DESC(key_echo, "Controls if speakup speaks keys when they are typed. One = on zero = off or don't echo keys.");
 MODULE_PARM_DESC(cur_phonetic, "Controls if speakup speaks letters phonetically during navigation. One = on zero = off or don't speak phonetically.");
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@ -281,7 +281,7 @@ _binder_proc_lock(struct binder_proc *proc, int line)
 *
 * Release lock acquired via binder_proc_lock()
 */
-#define binder_proc_unlock(_proc) _binder_proc_unlock(_proc, __LINE__)
+#define binder_proc_unlock(proc) _binder_proc_unlock(proc, __LINE__)
 static void
 _binder_proc_unlock(struct binder_proc *proc, int line)
 	__releases(&proc->outer_lock)
@ -378,7 +378,7 @@ _binder_node_inner_lock(struct binder_node *node, int line)
 }

 /**
- * binder_node_unlock() - Release node and inner locks
+ * binder_node_inner_unlock() - Release node and inner locks
 * @node:         struct binder_node to acquire
 *
 * Release lock acquired via binder_node_lock()
@ -1194,13 +1194,13 @@ static int binder_inc_ref_olocked(struct binder_ref *ref, int strong,
 }

 /**
- * binder_dec_ref() - dec the ref for given handle
+ * binder_dec_ref_olocked() - dec the ref for given handle
 * @ref:	ref to be decremented
 * @strong:	if true, strong decrement, else weak
 *
 * Decrement the ref.
 *
- * Return: true if ref is cleaned up and ready to be freed
+ * Return: %true if ref is cleaned up and ready to be freed.
 */
 static bool binder_dec_ref_olocked(struct binder_ref *ref, int strong)
 {
@ -2728,7 +2728,10 @@ binder_find_outdated_transaction_ilocked(struct binder_transaction *t,
 *
 * Return:	0 if the transaction was successfully queued
 *		BR_DEAD_REPLY if the target process or thread is dead
- *		BR_FROZEN_REPLY if the target process or thread is frozen
+ *		BR_FROZEN_REPLY if the target process or thread is frozen and
+ *			the sync transaction was rejected
+ *		BR_TRANSACTION_PENDING_FROZEN if the target process is frozen
+ *		and the async transaction was successfully queued
 */
 static int binder_proc_transaction(struct binder_transaction *t,
 				    struct binder_proc *proc,
@ -2738,6 +2741,7 @@ static int binder_proc_transaction(struct binder_transaction *t,
 	bool oneway = !!(t->flags & TF_ONE_WAY);
 	bool pending_async = false;
 	struct binder_transaction *t_outdated = NULL;
+	bool frozen = false;

 	BUG_ON(!node);
 	binder_node_lock(node);
@ -2751,15 +2755,16 @@ static int binder_proc_transaction(struct binder_transaction *t,

 	binder_inner_proc_lock(proc);
 	if (proc->is_frozen) {
+		frozen = true;
 		proc->sync_recv |= !oneway;
 		proc->async_recv |= oneway;
 	}

-	if ((proc->is_frozen && !oneway) || proc->is_dead ||
+	if ((frozen && !oneway) || proc->is_dead ||
 			(thread && thread->is_dead)) {
 		binder_inner_proc_unlock(proc);
 		binder_node_unlock(node);
-		return proc->is_frozen ? BR_FROZEN_REPLY : BR_DEAD_REPLY;
+		return frozen ? BR_FROZEN_REPLY : BR_DEAD_REPLY;
 	}

 	if (!thread && !pending_async)
@ -2770,7 +2775,7 @@ static int binder_proc_transaction(struct binder_transaction *t,
 	} else if (!pending_async) {
 		binder_enqueue_work_ilocked(&t->work, &proc->todo);
 	} else {
-		if ((t->flags & TF_UPDATE_TXN) && proc->is_frozen) {
+		if ((t->flags & TF_UPDATE_TXN) && frozen) {
 			t_outdated = binder_find_outdated_transaction_ilocked(t,
 									      &node->async_todo);
 			if (t_outdated) {
@ -2807,14 +2812,17 @@ static int binder_proc_transaction(struct binder_transaction *t,
 		binder_stats_deleted(BINDER_STAT_TRANSACTION);
 	}

+	if (oneway && frozen)
+		return BR_TRANSACTION_PENDING_FROZEN;
+
 	return 0;
 }

 /**
 * binder_get_node_refs_for_txn() - Get required refs on node for txn
 * @node:         struct binder_node for which to get refs
- * @proc:         returns @node->proc if valid
- * @error:        if no @proc then returns BR_DEAD_REPLY
+ * @procp:        returns @node->proc if valid
+ * @error:        if no @procp then returns BR_DEAD_REPLY
 *
 * User-space normally keeps the node alive when creating a transaction
 * since it has a reference to the target. The local strong ref keeps it
@ -2828,8 +2836,8 @@ static int binder_proc_transaction(struct binder_transaction *t,
 * constructing the transaction, so we take that here as well.
 *
 * Return: The target_node with refs taken or NULL if no @node->proc is NULL.
- * Also sets @proc if valid. If the @node->proc is NULL indicating that the
- * target proc has died, @error is set to BR_DEAD_REPLY
+ * Also sets @procp if valid. If the @node->proc is NULL indicating that the
+ * target proc has died, @error is set to BR_DEAD_REPLY.
 */
 static struct binder_node *binder_get_node_refs_for_txn(
 		struct binder_node *node,
@ -3607,9 +3615,17 @@ static void binder_transaction(struct binder_proc *proc,
 	} else {
 		BUG_ON(target_node == NULL);
 		BUG_ON(t->buffer->async_transaction != 1);
-		binder_enqueue_thread_work(thread, tcomplete);
 		return_error = binder_proc_transaction(t, target_proc, NULL);
-		if (return_error)
+		/*
+		 * Let the caller know when async transaction reaches a frozen
+		 * process and is put in a pending queue, waiting for the target
+		 * process to be unfrozen.
+		 */
+		if (return_error == BR_TRANSACTION_PENDING_FROZEN)
+			tcomplete->type = BINDER_WORK_TRANSACTION_PENDING;
+		binder_enqueue_thread_work(thread, tcomplete);
+		if (return_error &&
+		    return_error != BR_TRANSACTION_PENDING_FROZEN)
 			goto err_dead_proc_or_thread;
 	}
 	if (target_thread)
@ -4440,10 +4456,13 @@ retry:
 			binder_stat_br(proc, thread, cmd);
 		} break;
 		case BINDER_WORK_TRANSACTION_COMPLETE:
+		case BINDER_WORK_TRANSACTION_PENDING:
 		case BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT: {
 			if (proc->oneway_spam_detection_enabled &&
 				   w->type == BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT)
 				cmd = BR_ONEWAY_SPAM_SUSPECT;
+			else if (w->type == BINDER_WORK_TRANSACTION_PENDING)
+				cmd = BR_TRANSACTION_PENDING_FROZEN;
 			else
 				cmd = BR_TRANSACTION_COMPLETE;
 			binder_inner_proc_unlock(proc);
@ -5006,20 +5025,14 @@ static __poll_t binder_poll(struct file *filp,
 	return 0;
 }

-static int binder_ioctl_write_read(struct file *filp,
-				unsigned int cmd, unsigned long arg,
+static int binder_ioctl_write_read(struct file *filp, unsigned long arg,
 				struct binder_thread *thread)
 {
 	int ret = 0;
 	struct binder_proc *proc = filp->private_data;
-	unsigned int size = _IOC_SIZE(cmd);
 	void __user *ubuf = (void __user *)arg;
 	struct binder_write_read bwr;

-	if (size != sizeof(struct binder_write_read)) {
-		ret = -EINVAL;
-		goto out;
-	}
 	if (copy_from_user(&bwr, ubuf, sizeof(bwr))) {
 		ret = -EFAULT;
 		goto out;
@ -5296,7 +5309,6 @@ static long binder_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	int ret;
 	struct binder_proc *proc = filp->private_data;
 	struct binder_thread *thread;
-	unsigned int size = _IOC_SIZE(cmd);
 	void __user *ubuf = (void __user *)arg;

 	/*pr_info("binder_ioctl: %d:%d %x %lx\n",
@ -5318,7 +5330,7 @@ static long binder_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)

 	switch (cmd) {
 	case BINDER_WRITE_READ:
-		ret = binder_ioctl_write_read(filp, cmd, arg, thread);
+		ret = binder_ioctl_write_read(filp, arg, thread);
 		if (ret)
 			goto err;
 		break;
@ -5361,10 +5373,6 @@ static long binder_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	case BINDER_VERSION: {
 		struct binder_version __user *ver = ubuf;

-		if (size != sizeof(struct binder_version)) {
-			ret = -EINVAL;
-			goto err;
-		}
 		if (put_user(BINDER_CURRENT_PROTOCOL_VERSION,
 			     &ver->protocol_version)) {
 			ret = -EINVAL;
@ -6169,6 +6177,7 @@ static const char * const binder_return_strings[] = {
 	"BR_FAILED_REPLY",
 	"BR_FROZEN_REPLY",
 	"BR_ONEWAY_SPAM_SUSPECT",
+	"BR_TRANSACTION_PENDING_FROZEN"
 };

 static const char * const binder_command_strings[] = {
--- a/drivers/android/binder_internal.h
+++ b/drivers/android/binder_internal.h
@ -133,7 +133,7 @@ enum binder_stat_types {
 };

 struct binder_stats {
-	atomic_t br[_IOC_NR(BR_ONEWAY_SPAM_SUSPECT) + 1];
+	atomic_t br[_IOC_NR(BR_TRANSACTION_PENDING_FROZEN) + 1];
 	atomic_t bc[_IOC_NR(BC_REPLY_SG) + 1];
 	atomic_t obj_created[BINDER_STAT_COUNT];
 	atomic_t obj_deleted[BINDER_STAT_COUNT];
@ -152,6 +152,7 @@ struct binder_work {
 	enum binder_work_type {
 		BINDER_WORK_TRANSACTION = 1,
 		BINDER_WORK_TRANSACTION_COMPLETE,
+		BINDER_WORK_TRANSACTION_PENDING,
 		BINDER_WORK_TRANSACTION_ONEWAY_SPAM_SUSPECT,
 		BINDER_WORK_RETURN_ERROR,
 		BINDER_WORK_NODE,
--- a/drivers/android/binderfs.c
+++ b/drivers/android/binderfs.c
@ -222,14 +222,14 @@ err:
 }

 /**
- * binderfs_ctl_ioctl - handle binder device node allocation requests
+ * binder_ctl_ioctl - handle binder device node allocation requests
 *
 * The request handler for the binder-control device. All requests operate on
 * the binderfs mount the binder-control device resides in:
 * - BINDER_CTL_ADD
 *   Allocate a new binder device.
 *
- * Return: 0 on success, negative errno on failure
+ * Return: %0 on success, negative errno on failure.
 */
 static long binder_ctl_ioctl(struct file *file, unsigned int cmd,
 			     unsigned long arg)
--- a/drivers/bus/mhi/Makefile
+++ b/drivers/bus/mhi/Makefile
@ -1,5 +1,5 @@
 # Host MHI stack
-obj-y += host/
+obj-$(CONFIG_MHI_BUS) += host/

 # Endpoint MHI stack
-obj-y += ep/
+obj-$(CONFIG_MHI_BUS_EP) += ep/
--- a/drivers/bus/mhi/ep/main.c
+++ b/drivers/bus/mhi/ep/main.c
@ -123,6 +123,13 @@ static int mhi_ep_process_cmd_ring(struct mhi_ep_ring *ring, struct mhi_ring_ele
 	int ret;

 	ch_id = MHI_TRE_GET_CMD_CHID(el);
+
+	/* Check if the channel is supported by the controller */
+	if ((ch_id >= mhi_cntrl->max_chan) || !mhi_cntrl->mhi_chan[ch_id].name) {
+		dev_err(dev, "Channel (%u) not supported!\n", ch_id);
+		return -ENODEV;
+	}
+
 	mhi_chan = &mhi_cntrl->mhi_chan[ch_id];
 	ch_ring = &mhi_cntrl->mhi_chan[ch_id].ring;

@ -196,9 +203,11 @@ static int mhi_ep_process_cmd_ring(struct mhi_ep_ring *ring, struct mhi_ring_ele
 		mhi_ep_mmio_disable_chdb(mhi_cntrl, ch_id);

 		/* Send channel disconnect status to client drivers */
+		if (mhi_chan->xfer_cb) {
 			result.transaction_status = -ENOTCONN;
 			result.bytes_xferd = 0;
 			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+		}

 		/* Set channel state to STOP */
 		mhi_chan->state = MHI_CH_STATE_STOP;
@ -217,7 +226,7 @@ static int mhi_ep_process_cmd_ring(struct mhi_ep_ring *ring, struct mhi_ring_ele
 		mutex_unlock(&mhi_chan->lock);
 		break;
 	case MHI_PKT_TYPE_RESET_CHAN_CMD:
-		dev_dbg(dev, "Received STOP command for channel (%u)\n", ch_id);
+		dev_dbg(dev, "Received RESET command for channel (%u)\n", ch_id);
 		if (!ch_ring->started) {
 			dev_err(dev, "Channel (%u) not opened\n", ch_id);
 			return -ENODEV;
@ -228,9 +237,11 @@ static int mhi_ep_process_cmd_ring(struct mhi_ep_ring *ring, struct mhi_ring_ele
 		mhi_ep_ring_reset(mhi_cntrl, ch_ring);

 		/* Send channel disconnect status to client driver */
+		if (mhi_chan->xfer_cb) {
 			result.transaction_status = -ENOTCONN;
 			result.bytes_xferd = 0;
 			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+		}

 		/* Set channel state to DISABLED */
 		mhi_chan->state = MHI_CH_STATE_DISABLED;
@ -719,24 +730,37 @@ static void mhi_ep_ch_ring_worker(struct work_struct *work)
 		list_del(&itr->node);
 		ring = itr->ring;

+		chan = &mhi_cntrl->mhi_chan[ring->ch_id];
+		mutex_lock(&chan->lock);
+
+		/*
+		 * The ring could've stopped while we waited to grab the (chan->lock), so do
+		 * a sanity check before going further.
+		 */
+		if (!ring->started) {
+			mutex_unlock(&chan->lock);
+			kfree(itr);
+			continue;
+		}
+
 		/* Update the write offset for the ring */
 		ret = mhi_ep_update_wr_offset(ring);
 		if (ret) {
 			dev_err(dev, "Error updating write offset for ring\n");
+			mutex_unlock(&chan->lock);
 			kfree(itr);
 			continue;
 		}

 		/* Sanity check to make sure there are elements in the ring */
 		if (ring->rd_offset == ring->wr_offset) {
+			mutex_unlock(&chan->lock);
 			kfree(itr);
 			continue;
 		}

 		el = &ring->ring_cache[ring->rd_offset];
-		chan = &mhi_cntrl->mhi_chan[ring->ch_id];

-		mutex_lock(&chan->lock);
 		dev_dbg(dev, "Processing the ring for channel (%u)\n", ring->ch_id);
 		ret = mhi_ep_process_ch_ring(ring, el);
 		if (ret) {
@ -973,44 +997,25 @@ static void mhi_ep_abort_transfer(struct mhi_ep_cntrl *mhi_cntrl)
 static void mhi_ep_reset_worker(struct work_struct *work)
 {
 	struct mhi_ep_cntrl *mhi_cntrl = container_of(work, struct mhi_ep_cntrl, reset_work);
-	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	enum mhi_state cur_state;
-	int ret;

-	mhi_ep_abort_transfer(mhi_cntrl);
+	mhi_ep_power_down(mhi_cntrl);
+
+	mutex_lock(&mhi_cntrl->state_lock);

-	spin_lock_bh(&mhi_cntrl->state_lock);
 	/* Reset MMIO to signal host that the MHI_RESET is completed in endpoint */
 	mhi_ep_mmio_reset(mhi_cntrl);
 	cur_state = mhi_cntrl->mhi_state;
-	spin_unlock_bh(&mhi_cntrl->state_lock);

 	/*
 	 * Only proceed further if the reset is due to SYS_ERR. The host will
 	 * issue reset during shutdown also and we don't need to do re-init in
 	 * that case.
 	 */
-	if (cur_state == MHI_STATE_SYS_ERR) {
-		mhi_ep_mmio_init(mhi_cntrl);
+	if (cur_state == MHI_STATE_SYS_ERR)
+		mhi_ep_power_up(mhi_cntrl);

-		/* Set AMSS EE before signaling ready state */
-		mhi_ep_mmio_set_env(mhi_cntrl, MHI_EE_AMSS);
-
-		/* All set, notify the host that we are ready */
-		ret = mhi_ep_set_ready_state(mhi_cntrl);
-		if (ret)
-			return;
-
-		dev_dbg(dev, "READY state notification sent to the host\n");
-
-		ret = mhi_ep_enable(mhi_cntrl);
-		if (ret) {
-			dev_err(dev, "Failed to enable MHI endpoint: %d\n", ret);
-			return;
-		}
-
-		enable_irq(mhi_cntrl->irq);
-	}
+	mutex_unlock(&mhi_cntrl->state_lock);
 }

 /*
@ -1089,12 +1094,12 @@ EXPORT_SYMBOL_GPL(mhi_ep_power_up);

 void mhi_ep_power_down(struct mhi_ep_cntrl *mhi_cntrl)
 {
-	if (mhi_cntrl->enabled)
+	if (mhi_cntrl->enabled) {
 		mhi_ep_abort_transfer(mhi_cntrl);
-
 		kfree(mhi_cntrl->mhi_event);
 		disable_irq(mhi_cntrl->irq);
 	}
+}
 EXPORT_SYMBOL_GPL(mhi_ep_power_down);

 void mhi_ep_suspend_channels(struct mhi_ep_cntrl *mhi_cntrl)
@ -1119,6 +1124,7 @@ void mhi_ep_suspend_channels(struct mhi_ep_cntrl *mhi_cntrl)

 		dev_dbg(&mhi_chan->mhi_dev->dev, "Suspending channel\n");
 		/* Set channel state to SUSPENDED */
+		mhi_chan->state = MHI_CH_STATE_SUSPENDED;
 		tmp &= ~CHAN_CTX_CHSTATE_MASK;
 		tmp |= FIELD_PREP(CHAN_CTX_CHSTATE_MASK, MHI_CH_STATE_SUSPENDED);
 		mhi_cntrl->ch_ctx_cache[i].chcfg = cpu_to_le32(tmp);
@ -1148,6 +1154,7 @@ void mhi_ep_resume_channels(struct mhi_ep_cntrl *mhi_cntrl)

 		dev_dbg(&mhi_chan->mhi_dev->dev, "Resuming channel\n");
 		/* Set channel state to RUNNING */
+		mhi_chan->state = MHI_CH_STATE_RUNNING;
 		tmp &= ~CHAN_CTX_CHSTATE_MASK;
 		tmp |= FIELD_PREP(CHAN_CTX_CHSTATE_MASK, MHI_CH_STATE_RUNNING);
 		mhi_cntrl->ch_ctx_cache[i].chcfg = cpu_to_le32(tmp);
@ -1381,8 +1388,8 @@ int mhi_ep_register_controller(struct mhi_ep_cntrl *mhi_cntrl,

 	INIT_LIST_HEAD(&mhi_cntrl->st_transition_list);
 	INIT_LIST_HEAD(&mhi_cntrl->ch_db_list);
-	spin_lock_init(&mhi_cntrl->state_lock);
 	spin_lock_init(&mhi_cntrl->list_lock);
+	mutex_init(&mhi_cntrl->state_lock);
 	mutex_init(&mhi_cntrl->event_lock);

 	/* Set MHI version and AMSS EE before enumeration */
--- a/drivers/bus/mhi/ep/sm.c
+++ b/drivers/bus/mhi/ep/sm.c
@ -63,24 +63,23 @@ int mhi_ep_set_m0_state(struct mhi_ep_cntrl *mhi_cntrl)
 	int ret;

 	/* If MHI is in M3, resume suspended channels */
-	spin_lock_bh(&mhi_cntrl->state_lock);
+	mutex_lock(&mhi_cntrl->state_lock);
+
 	old_state = mhi_cntrl->mhi_state;
 	if (old_state == MHI_STATE_M3)
 		mhi_ep_resume_channels(mhi_cntrl);

 	ret = mhi_ep_set_mhi_state(mhi_cntrl, MHI_STATE_M0);
-	spin_unlock_bh(&mhi_cntrl->state_lock);
-
 	if (ret) {
 		mhi_ep_handle_syserr(mhi_cntrl);
-		return ret;
+		goto err_unlock;
 	}

 	/* Signal host that the device moved to M0 */
 	ret = mhi_ep_send_state_change_event(mhi_cntrl, MHI_STATE_M0);
 	if (ret) {
 		dev_err(dev, "Failed sending M0 state change event\n");
-		return ret;
+		goto err_unlock;
 	}

 	if (old_state == MHI_STATE_READY) {
@ -88,11 +87,14 @@ int mhi_ep_set_m0_state(struct mhi_ep_cntrl *mhi_cntrl)
 		ret = mhi_ep_send_ee_event(mhi_cntrl, MHI_EE_AMSS);
 		if (ret) {
 			dev_err(dev, "Failed sending AMSS EE event\n");
-			return ret;
+			goto err_unlock;
 		}
 	}

-	return 0;
+err_unlock:
+	mutex_unlock(&mhi_cntrl->state_lock);
+
+	return ret;
 }

 int mhi_ep_set_m3_state(struct mhi_ep_cntrl *mhi_cntrl)
@ -100,13 +102,12 @@ int mhi_ep_set_m3_state(struct mhi_ep_cntrl *mhi_cntrl)
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	int ret;

-	spin_lock_bh(&mhi_cntrl->state_lock);
-	ret = mhi_ep_set_mhi_state(mhi_cntrl, MHI_STATE_M3);
-	spin_unlock_bh(&mhi_cntrl->state_lock);
+	mutex_lock(&mhi_cntrl->state_lock);

+	ret = mhi_ep_set_mhi_state(mhi_cntrl, MHI_STATE_M3);
 	if (ret) {
 		mhi_ep_handle_syserr(mhi_cntrl);
-		return ret;
+		goto err_unlock;
 	}

 	mhi_ep_suspend_channels(mhi_cntrl);
@ -115,10 +116,13 @@ int mhi_ep_set_m3_state(struct mhi_ep_cntrl *mhi_cntrl)
 	ret = mhi_ep_send_state_change_event(mhi_cntrl, MHI_STATE_M3);
 	if (ret) {
 		dev_err(dev, "Failed sending M3 state change event\n");
-		return ret;
+		goto err_unlock;
 	}

-	return 0;
+err_unlock:
+	mutex_unlock(&mhi_cntrl->state_lock);
+
+	return ret;
 }

 int mhi_ep_set_ready_state(struct mhi_ep_cntrl *mhi_cntrl)
@ -127,22 +131,24 @@ int mhi_ep_set_ready_state(struct mhi_ep_cntrl *mhi_cntrl)
 	enum mhi_state mhi_state;
 	int ret, is_ready;

-	spin_lock_bh(&mhi_cntrl->state_lock);
+	mutex_lock(&mhi_cntrl->state_lock);
+
 	/* Ensure that the MHISTATUS is set to RESET by host */
 	mhi_state = mhi_ep_mmio_masked_read(mhi_cntrl, EP_MHISTATUS, MHISTATUS_MHISTATE_MASK);
 	is_ready = mhi_ep_mmio_masked_read(mhi_cntrl, EP_MHISTATUS, MHISTATUS_READY_MASK);

 	if (mhi_state != MHI_STATE_RESET || is_ready) {
 		dev_err(dev, "READY state transition failed. MHI host not in RESET state\n");
-		spin_unlock_bh(&mhi_cntrl->state_lock);
-		return -EIO;
+		ret = -EIO;
+		goto err_unlock;
 	}

 	ret = mhi_ep_set_mhi_state(mhi_cntrl, MHI_STATE_READY);
-	spin_unlock_bh(&mhi_cntrl->state_lock);
-
 	if (ret)
 		mhi_ep_handle_syserr(mhi_cntrl);

+err_unlock:
+	mutex_unlock(&mhi_cntrl->state_lock);
+
 	return ret;
 }
--- a/drivers/bus/mhi/host/init.c
+++ b/drivers/bus/mhi/host/init.c
@ -1449,4 +1449,4 @@ postcore_initcall(mhi_init);
 module_exit(mhi_exit);

 MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("MHI Host Interface");
+MODULE_DESCRIPTION("Modem Host Interface");
--- a/drivers/bus/simple-pm-bus.c
+++ b/drivers/bus/simple-pm-bus.c
@ -8,17 +8,24 @@
 * for more details.
 */

+#include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>

+struct simple_pm_bus {
+	struct clk_bulk_data *clks;
+	int num_clks;
+};
+
 static int simple_pm_bus_probe(struct platform_device *pdev)
 {
 	const struct device *dev = &pdev->dev;
 	const struct of_dev_auxdata *lookup = dev_get_platdata(dev);
 	struct device_node *np = dev->of_node;
 	const struct of_device_id *match;
+	struct simple_pm_bus *bus;

 	/*
 	 * Allow user to use driver_override to bind this driver to a
@ -44,6 +51,16 @@ static int simple_pm_bus_probe(struct platform_device *pdev)
 			return -ENODEV;
 	}

+	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		return -ENOMEM;
+
+	bus->num_clks = devm_clk_bulk_get_all(&pdev->dev, &bus->clks);
+	if (bus->num_clks < 0)
+		return dev_err_probe(&pdev->dev, bus->num_clks, "failed to get clocks\n");
+
+	dev_set_drvdata(&pdev->dev, bus);
+
 	dev_dbg(&pdev->dev, "%s\n", __func__);

 	pm_runtime_enable(&pdev->dev);
@ -67,6 +84,34 @@ static int simple_pm_bus_remove(struct platform_device *pdev)
 	return 0;
 }

+static int simple_pm_bus_runtime_suspend(struct device *dev)
+{
+	struct simple_pm_bus *bus = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(bus->num_clks, bus->clks);
+
+	return 0;
+}
+
+static int simple_pm_bus_runtime_resume(struct device *dev)
+{
+	struct simple_pm_bus *bus = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_bulk_prepare_enable(bus->num_clks, bus->clks);
+	if (ret) {
+		dev_err(dev, "failed to enable clocks: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops simple_pm_bus_pm_ops = {
+	RUNTIME_PM_OPS(simple_pm_bus_runtime_suspend, simple_pm_bus_runtime_resume, NULL)
+	NOIRQ_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
+};
+
 #define ONLY_BUS	((void *) 1) /* Match if the device is only a bus. */

 static const struct of_device_id simple_pm_bus_of_match[] = {
@ -85,6 +130,7 @@ static struct platform_driver simple_pm_bus_driver = {
 	.driver = {
 		.name = "simple-pm-bus",
 		.of_match_table = simple_pm_bus_of_match,
+		.pm = pm_ptr(&simple_pm_bus_pm_ops),
 	},
 };

--- a/drivers/char/applicom.c
+++ b/drivers/char/applicom.c
@ -197,8 +197,10 @@ static int __init applicom_init(void)
 		if (!pci_match_id(applicom_pci_tbl, dev))
 			continue;
 		
-		if (pci_enable_device(dev))
+		if (pci_enable_device(dev)) {
+			pci_dev_put(dev);
 			return -EIO;
+		}

 		RamIO = ioremap(pci_resource_start(dev, 0), LEN_RAM_IO);

@ -207,6 +209,7 @@ static int __init applicom_init(void)
 				"space at 0x%llx\n",
 				(unsigned long long)pci_resource_start(dev, 0));
 			pci_disable_device(dev);
+			pci_dev_put(dev);
 			return -EIO;
 		}

--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@ -529,7 +529,8 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
 			DEBUGP(5, dev, "NumRecBytes is valid\n");
 			break;
 		}
-		usleep_range(10000, 11000);
+		/* can not sleep as this is in atomic context */
+		mdelay(10);
 	}
 	if (i == 100) {
 		DEBUGP(5, dev, "Timeout waiting for NumRecBytes getting "
@ -549,7 +550,8 @@ static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
 			}
 			break;
 		}
-		usleep_range(10000, 11000);
+		/* can not sleep as this is in atomic context */
+		mdelay(10);
 	}

 	/* check whether it is a short PTS reply? */
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@ -483,7 +483,7 @@ static void* mgslpc_get_text_ptr(void)
 	return mgslpc_get_text_ptr;
 }

-/**
+/*
 * line discipline callback wrappers
 *
 * The wrappers maintain line discipline references
@ -3855,7 +3855,7 @@ static void tx_timeout(struct timer_list *t)

 #if SYNCLINK_GENERIC_HDLC

-/**
+/*
 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
 * set encoding and frame check sequence (FCS) options
 *
@ -3908,7 +3908,7 @@ static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
 	return 0;
 }

-/**
+/*
 * called by generic HDLC layer to send frame
 *
 * skb  socket buffer containing HDLC frame
@ -3953,7 +3953,7 @@ static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
 	return NETDEV_TX_OK;
 }

-/**
+/*
 * called by network layer when interface enabled
 * claim resources and initialize hardware
 *
@ -4016,7 +4016,7 @@ static int hdlcdev_open(struct net_device *dev)
 	return 0;
 }

-/**
+/*
 * called by network layer when interface is disabled
 * shutdown hardware and release resources
 *
@ -4047,7 +4047,7 @@ static int hdlcdev_close(struct net_device *dev)
 	return 0;
 }

-/**
+/*
 * called by network layer to process IOCTL call to network device
 *
 * dev  pointer to network device structure
@ -4150,7 +4150,7 @@ static int hdlcdev_wan_ioctl(struct net_device *dev, struct if_settings *ifs)
 	}
 }

-/**
+/*
 * called by network layer when transmit timeout is detected
 *
 * dev  pointer to network device structure
@ -4173,7 +4173,7 @@ static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue)
 	netif_wake_queue(dev);
 }

-/**
+/*
 * called by device driver when transmit completes
 * reenable network layer transmit if stopped
 *
@ -4185,7 +4185,7 @@ static void hdlcdev_tx_done(MGSLPC_INFO *info)
 		netif_wake_queue(info->netdev);
 }

-/**
+/*
 * called by device driver when frame received
 * pass frame to network layer
 *
@ -4225,7 +4225,7 @@ static const struct net_device_ops hdlcdev_ops = {
 	.ndo_tx_timeout = hdlcdev_tx_timeout,
 };

-/**
+/*
 * called by device driver when adding device instance
 * do generic HDLC initialization
 *
@ -4273,7 +4273,7 @@ static int hdlcdev_init(MGSLPC_INFO *info)
 	return 0;
 }

-/**
+/*
 * called by device driver when removing device instance
 * do generic HDLC cleanup
 *
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@ -1666,9 +1666,8 @@ static void handle_control_message(struct virtio_device *vdev,
 				"Not enough space to store port name\n");
 			break;
 		}
-		strncpy(port->name, buf->buf + buf->offset + sizeof(*cpkt),
-			name_size - 1);
-		port->name[name_size - 1] = 0;
+		strscpy(port->name, buf->buf + buf->offset + sizeof(*cpkt),
+			name_size);

 		/*
 		 * Since we only have one sysfs attribute, 'name',
--- a/drivers/comedi/Kconfig
+++ b/drivers/comedi/Kconfig
@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
-config COMEDI
+menuconfig COMEDI
 	tristate "Data acquisition support (comedi)"
 	help
 	  Enable support for a wide range of data acquisition devices
--- a/drivers/comedi/comedi_fops.c
+++ b/drivers/comedi/comedi_fops.c
@ -1215,6 +1215,7 @@ static int check_insn_config_length(struct comedi_insn *insn,
 	case INSN_CONFIG_GET_CLOCK_SRC:
 	case INSN_CONFIG_SET_OTHER_SRC:
 	case INSN_CONFIG_GET_COUNTER_STATUS:
+	case INSN_CONFIG_GET_PWM_OUTPUT:
 	case INSN_CONFIG_PWM_SET_H_BRIDGE:
 	case INSN_CONFIG_PWM_GET_H_BRIDGE:
 	case INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE:
--- a/drivers/counter/Kconfig
+++ b/drivers/counter/Kconfig
@ -29,6 +29,28 @@ config 104_QUAD_8
 	  array module parameter. The interrupt line numbers for the devices may
 	  be configured via the irq array module parameter.

+config FTM_QUADDEC
+	tristate "Flex Timer Module Quadrature decoder driver"
+	depends on SOC_LS1021A || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	help
+	  Select this option to enable the Flex Timer Quadrature decoder
+	  driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ftm-quaddec.
+
+config INTEL_QEP
+	tristate "Intel Quadrature Encoder Peripheral driver"
+	depends on X86
+	depends on PCI
+	help
+	  Select this option to enable the Intel Quadrature Encoder Peripheral
+	  driver.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel-qep.
+
 config INTERRUPT_CNT
 	tristate "Interrupt counter driver"
 	depends on GPIOLIB
@ -39,15 +61,17 @@ config INTERRUPT_CNT
 	  To compile this driver as a module, choose M here: the
 	  module will be called interrupt-cnt.

-config STM32_TIMER_CNT
-	tristate "STM32 Timer encoder counter driver"
-	depends on MFD_STM32_TIMERS || COMPILE_TEST
+config MICROCHIP_TCB_CAPTURE
+	tristate "Microchip Timer Counter Capture driver"
+	depends on SOC_AT91SAM9 || SOC_SAM_V7 || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	select REGMAP_MMIO
 	help
-	  Select this option to enable STM32 Timer quadrature encoder
-	  and counter driver.
+	  Select this option to enable the Microchip Timer Counter Block
+	  capture driver.

 	  To compile this driver as a module, choose M here: the
-	  module will be called stm32-timer-cnt.
+	  module will be called microchip-tcb-capture.

 config STM32_LPTIMER_CNT
 	tristate "STM32 LP Timer encoder counter driver"
@ -59,47 +83,15 @@ config STM32_LPTIMER_CNT
 	  To compile this driver as a module, choose M here: the
 	  module will be called stm32-lptimer-cnt.

-config TI_EQEP
-	tristate "TI eQEP counter driver"
-	depends on (SOC_AM33XX || COMPILE_TEST)
-	select REGMAP_MMIO
+config STM32_TIMER_CNT
+	tristate "STM32 Timer encoder counter driver"
+	depends on MFD_STM32_TIMERS || COMPILE_TEST
 	help
-	  Select this option to enable the Texas Instruments Enhanced Quadrature
-	  Encoder Pulse (eQEP) counter driver.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called ti-eqep.
-
-config FTM_QUADDEC
-	tristate "Flex Timer Module Quadrature decoder driver"
-	depends on HAS_IOMEM && OF
-	help
-	  Select this option to enable the Flex Timer Quadrature decoder
-	  driver.
+	  Select this option to enable STM32 Timer quadrature encoder
+	  and counter driver.

 	  To compile this driver as a module, choose M here: the
-	  module will be called ftm-quaddec.
-
-config MICROCHIP_TCB_CAPTURE
-	tristate "Microchip Timer Counter Capture driver"
-	depends on HAS_IOMEM && OF
-	select REGMAP_MMIO
-	help
-	  Select this option to enable the Microchip Timer Counter Block
-	  capture driver.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called microchip-tcb-capture.
-
-config INTEL_QEP
-	tristate "Intel Quadrature Encoder Peripheral driver"
-	depends on PCI
-	help
-	  Select this option to enable the Intel Quadrature Encoder Peripheral
-	  driver.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called intel-qep.
+	  module will be called stm32-timer-cnt.

 config TI_ECAP_CAPTURE
 	tristate "TI eCAP capture driver"
@ -116,4 +108,15 @@ config TI_ECAP_CAPTURE
 	  To compile this driver as a module, choose M here: the module
 	  will be called ti-ecap-capture.

+config TI_EQEP
+	tristate "TI eQEP counter driver"
+	depends on (SOC_AM33XX || COMPILE_TEST)
+	select REGMAP_MMIO
+	help
+	  Select this option to enable the Texas Instruments Enhanced Quadrature
+	  Encoder Pulse (eQEP) counter driver.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ti-eqep.
+
 endif # COUNTER
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@ -357,6 +357,16 @@ struct hisi_qm_resource {
 	struct list_head list;
 };

+/**
+ * struct qm_hw_err - Structure describing the device errors
+ * @list: hardware error list
+ * @timestamp: timestamp when the error occurred
+ */
+struct qm_hw_err {
+	struct list_head list;
+	unsigned long long timestamp;
+};
+
 struct hisi_qm_hw_ops {
 	int (*get_vft)(struct hisi_qm *qm, u32 *base, u32 *number);
 	void (*qm_db)(struct hisi_qm *qm, u16 qn,
@ -2458,6 +2468,113 @@ static long hisi_qm_uacce_ioctl(struct uacce_queue *q, unsigned int cmd,
 	return -EINVAL;
 }

+/**
+ * qm_hw_err_isolate() - Try to set the isolation status of the uacce device
+ * according to user's configuration of error threshold.
+ * @qm: the uacce device
+ */
+static int qm_hw_err_isolate(struct hisi_qm *qm)
+{
+	struct qm_hw_err *err, *tmp, *hw_err;
+	struct qm_err_isolate *isolate;
+	u32 count = 0;
+
+	isolate = &qm->isolate_data;
+
+#define SECONDS_PER_HOUR	3600
+
+	/* All the hw errs are processed by PF driver */
+	if (qm->uacce->is_vf || isolate->is_isolate || !isolate->err_threshold)
+		return 0;
+
+	hw_err = kzalloc(sizeof(*hw_err), GFP_KERNEL);
+	if (!hw_err)
+		return -ENOMEM;
+
+	/*
+	 * Time-stamp every slot AER error. Then check the AER error log when the
+	 * next device AER error occurred. if the device slot AER error count exceeds
+	 * the setting error threshold in one hour, the isolated state will be set
+	 * to true. And the AER error logs that exceed one hour will be cleared.
+	 */
+	mutex_lock(&isolate->isolate_lock);
+	hw_err->timestamp = jiffies;
+	list_for_each_entry_safe(err, tmp, &isolate->qm_hw_errs, list) {
+		if ((hw_err->timestamp - err->timestamp) / HZ >
+		    SECONDS_PER_HOUR) {
+			list_del(&err->list);
+			kfree(err);
+		} else {
+			count++;
+		}
+	}
+	list_add(&hw_err->list, &isolate->qm_hw_errs);
+	mutex_unlock(&isolate->isolate_lock);
+
+	if (count >= isolate->err_threshold)
+		isolate->is_isolate = true;
+
+	return 0;
+}
+
+static void qm_hw_err_destroy(struct hisi_qm *qm)
+{
+	struct qm_hw_err *err, *tmp;
+
+	mutex_lock(&qm->isolate_data.isolate_lock);
+	list_for_each_entry_safe(err, tmp, &qm->isolate_data.qm_hw_errs, list) {
+		list_del(&err->list);
+		kfree(err);
+	}
+	mutex_unlock(&qm->isolate_data.isolate_lock);
+}
+
+static enum uacce_dev_state hisi_qm_get_isolate_state(struct uacce_device *uacce)
+{
+	struct hisi_qm *qm = uacce->priv;
+	struct hisi_qm *pf_qm;
+
+	if (uacce->is_vf)
+		pf_qm = pci_get_drvdata(pci_physfn(qm->pdev));
+	else
+		pf_qm = qm;
+
+	return pf_qm->isolate_data.is_isolate ?
+			UACCE_DEV_ISOLATE : UACCE_DEV_NORMAL;
+}
+
+static int hisi_qm_isolate_threshold_write(struct uacce_device *uacce, u32 num)
+{
+	struct hisi_qm *qm = uacce->priv;
+
+	/* Must be set by PF */
+	if (uacce->is_vf)
+		return -EPERM;
+
+	if (qm->isolate_data.is_isolate)
+		return -EPERM;
+
+	qm->isolate_data.err_threshold = num;
+
+	/* After the policy is updated, need to reset the hardware err list */
+	qm_hw_err_destroy(qm);
+
+	return 0;
+}
+
+static u32 hisi_qm_isolate_threshold_read(struct uacce_device *uacce)
+{
+	struct hisi_qm *qm = uacce->priv;
+	struct hisi_qm *pf_qm;
+
+	if (uacce->is_vf) {
+		pf_qm = pci_get_drvdata(pci_physfn(qm->pdev));
+		return pf_qm->isolate_data.err_threshold;
+	}
+
+	return qm->isolate_data.err_threshold;
+}
+
 static const struct uacce_ops uacce_qm_ops = {
 	.get_available_instances = hisi_qm_get_available_instances,
 	.get_queue = hisi_qm_uacce_get_queue,
@ -2467,8 +2584,22 @@ static const struct uacce_ops uacce_qm_ops = {
 	.mmap = hisi_qm_uacce_mmap,
 	.ioctl = hisi_qm_uacce_ioctl,
 	.is_q_updated = hisi_qm_is_q_updated,
+	.get_isolate_state = hisi_qm_get_isolate_state,
+	.isolate_err_threshold_write = hisi_qm_isolate_threshold_write,
+	.isolate_err_threshold_read = hisi_qm_isolate_threshold_read,
 };

+static void qm_remove_uacce(struct hisi_qm *qm)
+{
+	struct uacce_device *uacce = qm->uacce;
+
+	if (qm->use_sva) {
+		qm_hw_err_destroy(qm);
+		uacce_remove(uacce);
+		qm->uacce = NULL;
+	}
+}
+
 static int qm_alloc_uacce(struct hisi_qm *qm)
 {
 	struct pci_dev *pdev = qm->pdev;
@ -2495,8 +2626,7 @@ static int qm_alloc_uacce(struct hisi_qm *qm)
 		qm->use_sva = true;
 	} else {
 		/* only consider sva case */
-		uacce_remove(uacce);
-		qm->uacce = NULL;
+		qm_remove_uacce(qm);
 		return -EINVAL;
 	}

@ -2529,6 +2659,8 @@ static int qm_alloc_uacce(struct hisi_qm *qm)
 	uacce->qf_pg_num[UACCE_QFRT_DUS]  = dus_page_nr;

 	qm->uacce = uacce;
+	INIT_LIST_HEAD(&qm->isolate_data.qm_hw_errs);
+	mutex_init(&qm->isolate_data.isolate_lock);

 	return 0;
 }
@ -4017,6 +4149,12 @@ static int qm_controller_reset_prepare(struct hisi_qm *qm)
 		return ret;
 	}

+	if (qm->use_sva) {
+		ret = qm_hw_err_isolate(qm);
+		if (ret)
+			pci_err(pdev, "failed to isolate hw err!\n");
+	}
+
 	ret = qm_wait_vf_prepare_finish(qm);
 	if (ret)
 		pci_err(pdev, "failed to stop by vfs in soft reset!\n");
@ -4321,21 +4459,25 @@ static int qm_controller_reset(struct hisi_qm *qm)
 		qm->err_ini->show_last_dfx_regs(qm);

 	ret = qm_soft_reset(qm);
-	if (ret) {
-		pci_err(pdev, "Controller reset failed (%d)\n", ret);
-		qm_reset_bit_clear(qm);
-		return ret;
-	}
+	if (ret)
+		goto err_reset;

 	ret = qm_controller_reset_done(qm);
-	if (ret) {
-		qm_reset_bit_clear(qm);
-		return ret;
-	}
+	if (ret)
+		goto err_reset;

 	pci_info(pdev, "Controller reset complete\n");

 	return 0;
+
+err_reset:
+	pci_err(pdev, "Controller reset failed (%d)\n", ret);
+	qm_reset_bit_clear(qm);
+
+	/* if resetting fails, isolate the device */
+	if (qm->use_sva)
+		qm->isolate_data.is_isolate = true;
+	return ret;
 }

 /**
@ -5255,10 +5397,7 @@ int hisi_qm_init(struct hisi_qm *qm)
 err_free_qm_memory:
 	hisi_qm_memory_uninit(qm);
 err_alloc_uacce:
-	if (qm->use_sva) {
-		uacce_remove(qm->uacce);
-		qm->uacce = NULL;
-	}
+	qm_remove_uacce(qm);
 err_irq_register:
 	qm_irqs_unregister(qm);
 err_pci_init:
--- a/Show More
+++ b/Show More